Dear,
I do not think so.
While I used `apt-get install xorg`, same problem.
Thanks.
Jörg-Volker Peetz wrote:
Peter Smerdon wrote:
Hello, I have a brand new HP pavillion laptop with debian unstable amd64
installed.
I cannot get x to start, but more worrying than that is that
/v
Hi all,
Being on the road a lot with my trusted lappy, I'd like to get
suggestions on the best solution for an iptables based firewall that
needs to be easily reconfigurable for wireless, ethernet cable, and ppp.
I should be able to apply rules on the fly using tools such as wireshark
to identify
Peter Smerdon wrote:
Hello, I have a brand new HP pavillion laptop with debian unstable amd64
installed.
I cannot get x to start, but more worrying than that is that
/var/log/Xorg.0.log does not exist, and never gets generated.
Magicloud Magiclouds wrote:
Dear,
I have the same problem on
Hello,...
I would like to forward all phone calls to voip program (skype is preferd).
But i can't find a sofware vased solutione (I found only hardware
adaptors) i wish to find a way to connect a mobile phone (motorla) to
debian using Usb/ Com / BlueTooth connection and then forward it to a
VOIP p
Dear,
I have the same problem on two new installed box. I do not know what to
do.
And on an old box which upgraded to 7.3, it crashed a lot, and
switching to tty just gives a beautiful colored screen
Thanks.
Peter Smerdon wrote:
Hello, I have a brand new HP pavillion laptop with
Hi,
I am running Debian Etch on a Macbook, and I have a simple problem,
namely, that my $HOME/.Xresources file, which has a few colour options
for xterm, is not read at startup. I need to manually xrdb load it
each session. I tried a variety of options, including linking it to
the system Xdefaults
On Tue, Nov 20, 2007 at 09:56:21AM -0500, "Loeghmon T. Nejad" <[EMAIL
PROTECTED]> was heard to say:
> I am learning Debian and I was wondering if it possible to install two
> instances of Debian on the same machine. One as the production
> workstation for the daily work, and the other for experime
On Tue, Nov 20, 2007 at 01:43:33PM -0900, Ken Irving <[EMAIL PROTECTED]> was
heard to say:
> I never have understood the reasons (haven't checked very hard), but it
> seems like apt-get normally gives an "are you sure?" prompt before doing
> the action, but sometimes it just goes ahead and does it
On Tue, Nov 20, 2007 at 09:06:59PM -0600, Jack Schneider <[EMAIL PROTECTED]>
was heard to say:
> On Tue, 2007-11-20 at 10:26 -0500, Michael Pobega wrote:
> > On Tue, Nov 20, 2007 at 02:42:09PM +, Jack Schneider wrote:
> > > I have lost my Desktop window borders. I am using Debian "lenny"
> > >
Hi I have a HP 1210 all-in-one over Debian SID and I'm trying to use the
scanner but is not working, I have hpoj and hplip both running, and when I
run XSane says this:
Failure during opening disp:
`hpaio:/usb/psc_1210_series?serial=MY41EF738YH': Error during E/S
If someone knows can I use the sc
Hi, I've just made an upgrade and now I have a lot of graphic problems:
1.- I can't access to tty1 - tt6 If y try ctrl + alt + <1-6> my screen is
just black so I have to return to tty 7 (graphic mode).
2.- xfce4's applications present problems with colors, are displayed in a
very very low resoluti
On Tuesday 20 November 2007, Andrei Popescu wrote:
> On Tue, Nov 20, 2007 at 09:03:17PM -0500, Hal Vaughan wrote:
> > Would that be a setting on their router or on their Windows server?
> > My guess is it depends on whether my system is behind uses NAT.
>
> Whatever they use as the DHCP server. Th
On Tue, Nov 20, 2007 at 10:13:41PM -0600, Jack Schneider wrote:
> On Wed, 2007-11-21 at 05:17 +0200, Andrei Popescu wrote:
> > On Tue, Nov 20, 2007 at 02:42:09PM +, Jack Schneider wrote:
> > > Hi, folks
> > >
> > > I have lost my Desktop window borders. I am using Debian "lenny"
> > > updated
Hello. I have a Creative Zen V Plus MP3 player. I cannot seem to
open it, or mount it. I tried installing gnomad2, but it cannot find
the usb device. I tried mounting /dev/sda1, but this also did not work.
My system does see it:
[EMAIL PROTECTED]:~$ lsusb
Bus 001 Device 006: ID 041e:4152 Crea
On Tue, Nov 20, 2007 at 06:24:55PM -0800, joseph lockhart wrote:
> >On Tue, Nov 20, 2007 at 03:47:52PM -0500, Douglas A. Tutty wrote:
> thank you doug, appreciate the responce, yes i want it with absolutely
> no x, the plan is to put it on an old box to force me to learn the
> commandline better
Peter Smerdon wrote:
Kent West <[EMAIL PROTECTED]> writes:
What happens if you just try running X alone, as in:
# X &
The same thing happened running X directly
Maybe try redirecting the errors to a file:
# X 2> errors.txt &
--
Kent
--
To UNSUBSCRIBE, email to [EMAIL PROTE
On Nov 19, 2007 4:51 AM, Paul Cartwright <[EMAIL PROTECTED]> wrote:
> not sure what all this means, should I be worried?
>
> $ tail -50 .xsession-errors
> kbuildsycoca: WARNING: '/usr/share/applications/banshee.desktop' specifies
> undefined mimetype/servicetype 'audio/x-mpeg-3'
kbuildsycoca alwa
On Nov 20, 2007 5:55 PM, Reid Priedhorsky <[EMAIL PROTECTED]> wrote:
> Folks,
>
> I'm looking for a decent USB flatbed scanner for use with my Lenny box --
> and I don't want to spend much, $20-30 on eBay would be ideal. I would use
> it to scan photo prints and text documents.
>
> Any suggestions
On Nov 20, 2007 5:55 PM, Reid Priedhorsky <[EMAIL PROTECTED]> wrote:
> Folks,
>
> I'm looking for a decent USB flatbed scanner for use with my Lenny box --
> and I don't want to spend much, $20-30 on eBay would be ideal. I would use
> it to scan photo prints and text documents.
>
> Any suggestions
On Tue, Nov 20, 2007 at 09:03:17PM -0500, Hal Vaughan wrote:
> Would that be a setting on their router or on their Windows server? My
> guess is it depends on whether my system is behind uses NAT.
Whatever they use as the DHCP server. They could also be using some
managed switches and you are
On Nov 20, 2007 6:55 PM, Peter Smerdon <[EMAIL PROTECTED]> wrote:
> Kent West <[EMAIL PROTECTED]> writes:
>
> > What happens if you just try running X alone, as in:
> >
> > # X &
> >
>
> The same thing happened running X directly
>
> I am having problems even googling this. It seems like a very rar
On Tue, Nov 20, 2007 at 02:42:09PM +, Jack Schneider wrote:
> Hi, folks
>
> I have lost my Desktop window borders. I am using Debian "lenny"
> updated. Problem occurred after an abortedattempt to install Compiz..
> I get the following error from theSystem>preferences>windows menu..
> " Cann
On Tue, Nov 20, 2007 at 01:43:33PM -0900, Ken Irving wrote:
> On Tue, Nov 20, 2007 at 03:47:52PM -0500, Douglas A. Tutty wrote:
> > If you specifically don't want any X, I suggest strongly that you use
> > aptitude interactively so that you can go back and forth if you choose
> > something that wan
Paul Cartwright <[EMAIL PROTECTED]>:
> not sure what all this means, should I be worried?
>
> $ tail -50 .xsession-errors
> kbuildsycoca: WARNING: '/usr/share/applications/banshee.desktop' specifies
> undefined mimetype/servicetype 'audio/x-mpeg-3'
> [snip]
> kbuildsycoca: WARNING: 'Graphic
On Tue, 2007-11-20 at 10:26 -0500, Michael Pobega wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Tue, Nov 20, 2007 at 02:42:09PM +, Jack Schneider wrote:
> > Hi, folks
> >
> > I have lost my Desktop window borders. I am using Debian "lenny"
> > updated. Problem occurred after
Mark Quitoriano <[EMAIL PROTECTED]>:
>
> im new to debian im looking which version should i download. i can see
> the stable version is 4.0 but when i look for the ISO i only see
> debian-4.0r1? is this the latest? or is it a release candidate?
http://www.debian.org/CD/
"Latest official
Kent West <[EMAIL PROTECTED]> writes:
> What happens if you just try running X alone, as in:
>
> # X &
>
The same thing happened running X directly
I am having problems even googling this. It seems like a very rare
situation and I am not sure what package is causing this so I am
conidering re-in
Dear all,
And mplayer under the working 7.3 crashed a lot.
Thanks.
Magicloud Magiclouds wrote:
Dear all,
I installed a new box yesterday with debian sid, which is fine.
Then I `apt-get install xorg`, after I configure xserver-xorg as
usual, `startx` failed, with message 'xinit: Server e
Sjoerd Hiemstra wrote:
> The usual cure for this is to add the -playlist option:
>
> mplayer -playlist
>
> You do NOT need avisynth.dll.
The -playlist option works great! Now mplayer can play the npr radio
streams... yay! Thanks for all those who replied.
raju
--
Kamaraju S Kusumanchi
ht
apologies for sending this twice, left the subject off
the previous one and wished to maintain the continuity
of the thread
>On Tue, Nov 20, 2007 at 03:47:52PM -0500, Douglas A.
>Tutty wrote:
>
>> After you reboot and get a prompt, use aptitude
>and install what you
>> want: exim4 and mutt for m
>On Tue, Nov 20, 2007 at 03:47:52PM -0500, Douglas A.
>Tutty wrote:
>
>> After you reboot and get a prompt, use aptitude
>and install what you
>> want: exim4 and mutt for mail, lynx and perhaps
>links2 (does
>> javascript), and of course mc (midnight
>commander). Finish off with
>> your editor-o
Dear all,
I installed a new box yesterday with debian sid, which is fine. Then
I `apt-get install xorg`, after I configure xserver-xorg as usual,
`startx` failed, with message 'xinit: Server error.' and nothing more.
I installed another box this morning, still the same.
While another b
Douglas A. Tutty([EMAIL PROTECTED]) is reported to have said:
> On Tue, Nov 20, 2007 at 06:40:08PM -0500, Wayne Topa wrote:
> > Douglas A. Tutty([EMAIL PROTECTED]) is reported to have said:
> >
> > > For main board, I went with Asus M2N-SLI Deluxe: lots of SATA and USB
> > > ports, great sound (f
On Tue November 20 2007, Florian Kulzer wrote:
> That looks OK to me.
>
> Which output do you get for these three commands:
>
> awk '/Section "(InputDevice|ServerFlags)"/,/EndSection/' /etc/X11/xorg.conf
>
$ awk '/Section "(InputDevice|ServerFlags)"/,/EndSection/' /etc/X11/xorg.conf
Section "InputD
Folks,
I'm looking for a decent USB flatbed scanner for use with my Lenny box --
and I don't want to spend much, $20-30 on eBay would be ideal. I would use
it to scan photo prints and text documents.
Any suggestions for manufacturers or specific models, or pointers to good
resources to help me ch
tom arnall wrote:
i just tried to do an upgrade and got the following messages:
snip---
Reading changelogs... Done
Error: "/tmp/kde-klorovwp0rg" is owned by uid 1000 instead of uid 0.
Link points to "/tmp/kde-root"
Error: "/tmp/ksocket-klorobxLJlU" is owned by uid 1000 instead of uid 0.
Link
On Tuesday 20 November 2007, you wrote:
> On 21/11/2007, Hal Vaughan <[EMAIL PROTECTED]> wrote:
> > I have a default Sarge installation that I had to move to a new
> > network. It had been getting the address through DHCP with no
> > problem. Now, on the new network, it tries to connect to a DHCP
Peter Smerdon wrote:
Florian Kulzer <[EMAIL PROTECTED]> writes:
Do you see anything interesting in /var/log/syslog?
nothing appears in syslog with the startx command, however everytime I
use gdm I get:
Nov 20 17:51:54 laptop gdm[4562]: WARNING: Failed to start X server
several times
On Wed, 21 Nov 2007 06:47:57 +0530
"Sudev Barar" <[EMAIL PROTECTED]> wrote:
> On 21/11/2007, Celejar <[EMAIL PROTECTED]> wrote:
> > On Tue, 20 Nov 2007 16:05:50 -0500 "H.S." <[EMAIL PROTECTED]> wrote:
> > > Does anybody know of a few dynamic DNS service which redirects traffic
> > > on port 80 to
i just tried to do an upgrade and got the following messages:
snip---
Reading changelogs... Done
Error: "/tmp/kde-klorovwp0rg" is owned by uid 1000 instead of uid 0.
Link points to "/tmp/kde-root"
Error: "/tmp/ksocket-klorobxLJlU" is owned by uid 1000 instead of uid 0.
Link points to "/tmp/kso
On Tue, 20 Nov 2007 20:28:08 -0500
"H.S." <[EMAIL PROTECTED]> wrote:
> Celejar wrote:
> > On Tue, 20 Nov 2007 16:05:50 -0500
> > "H.S." <[EMAIL PROTECTED]> wrote:
> >
> >> Hello,
> >>
> >> Does anybody know of a few dynamic DNS service which redirects traffic
> >> on port 80 to a different port o
On Wed, 21 Nov 2007 06:47:57 +0530
"Sudev Barar" <[EMAIL PROTECTED]> wrote:
> On 21/11/2007, Celejar <[EMAIL PROTECTED]> wrote:
> > On Tue, 20 Nov 2007 16:05:50 -0500 "H.S." <[EMAIL PROTECTED]> wrote:
> > > Does anybody know of a few dynamic DNS service which redirects traffic
> > > on port 80 to
Florian Kulzer <[EMAIL PROTECTED]> writes:
> Do you see anything interesting in /var/log/syslog?
>
nothing appears in syslog with the startx command, however everytime I
use gdm I get:
Nov 20 17:51:54 laptop gdm[4562]: WARNING: Failed to start X server
several times in a short time period; disab
Celejar wrote:
> On Tue, 20 Nov 2007 16:05:50 -0500
> "H.S." <[EMAIL PROTECTED]> wrote:
>
>> Hello,
>>
>> Does anybody know of a few dynamic DNS service which redirects traffic
>> on port 80 to a different port on my machine (which has a dynamic IP)?
>
> Is Dyndns's WebHop what you need?
> http:/
On 21/11/2007, Celejar <[EMAIL PROTECTED]> wrote:
> On Tue, 20 Nov 2007 16:05:50 -0500 "H.S." <[EMAIL PROTECTED]> wrote:
> > Does anybody know of a few dynamic DNS service which redirects traffic
> > on port 80 to a different port on my machine (which has a dynamic IP)?
>
> Is Dyndns's WebHop what
On 21/11/2007, Hal Vaughan <[EMAIL PROTECTED]> wrote:
> I have a default Sarge installation that I had to move to a new network.
> It had been getting the address through DHCP with no problem. Now, on
> the new network, it tries to connect to a DHCP server, but there's no
> connection. I was not
On Tue, 20 Nov 2007 16:05:50 -0500
"H.S." <[EMAIL PROTECTED]> wrote:
> Hello,
>
> Does anybody know of a few dynamic DNS service which redirects traffic
> on port 80 to a different port on my machine (which has a dynamic IP)?
Is Dyndns's WebHop what you need?
http://www.dyndns.com/support/kb/web
On Tue, 20 Nov 2007 20:43:39 +0100
Sven Joachim <[EMAIL PROTECTED]> wrote:
> Hello Steve,
>
> On 2007-11-20 20:10 +0100, Steve Kleene wrote:
>
> > I post occasionally to the mplayer forum, which is archived at:
> >
> > http://lists.mplayerhq.hu/pipermail/mplayer-users/
> >
> > All posts there
i just tried to do an upgrade and got the following messages:
snip---
Reading changelogs... Done
Error: "/tmp/kde-klorovwp0rg" is owned by uid 1000 instead of uid 0.
Link points to "/tmp/kde-root"
Error: "/tmp/ksocket-klorobxLJlU" is owned by uid 1000 instead of uid 0.
Link points to "/tmp/kso
On Tue, Nov 20, 2007 at 06:40:08PM -0500, Wayne Topa wrote:
> Douglas A. Tutty([EMAIL PROTECTED]) is reported to have said:
>
> > For main board, I went with Asus M2N-SLI Deluxe: lots of SATA and USB
> > ports, great sound (for me), etc. It doesn't have integrated video but
> > an Asus EN7300GT
On Tue, Nov 20, 2007 at 03:47:52PM -0500, Douglas A. Tutty wrote:
> After you reboot and get a prompt, use aptitude and install what you
> want: exim4 and mutt for mail, lynx and perhaps links2 (does
> javascript), and of course mc (midnight commander). Finish off with
> your editor-of-choice (
Douglas A. Tutty([EMAIL PROTECTED]) is reported to have said:
> On Wed, Nov 21, 2007 at 12:39:58AM +0800, Augustin wrote:
> Hello Augustin, I'll try to put comments in-line where they'll make
> sense.
>
> > I am set to buying a socket AM2 mainboard, with a slow CPU, a minimum
> > amount of RAM a
On Tue, Nov 20, 2007 at 05:53:40PM -0500, Hal Vaughan wrote:
> I have a default Sarge installation that I had to move to a new network.
> It had been getting the address through DHCP with no problem. Now, on
> the new network, it tries to connect to a DHCP server, but there's no
> connection.
On Tue, Nov 20, 2007 at 11:44:56PM +0100, Nigel Henry wrote:
> On Tuesday 20 November 2007 21:57, Bill Smith wrote:
> > Henrique Rennó wrote:
> > > I have a Windows XP machine connected to the Internet and an
> > > additional network card with a fixed IP configured (192.168.0.5). I
> > > connected
I have a default Sarge installation that I had to move to a new network.
It had been getting the address through DHCP with no problem. Now, on
the new network, it tries to connect to a DHCP server, but there's no
connection. I was not able to copy down the messages because the
business was c
On Tuesday 20 November 2007 21:57, Bill Smith wrote:
> Henrique Rennó wrote:
> > I have a Windows XP machine connected to the Internet and an
> > additional network card with a fixed IP configured (192.168.0.5). I
> > connected a crossover network cable to my laptop in which I installed
> > Debian
On Tue, Nov 20, 2007 at 03:47:52PM -0500, Douglas A. Tutty wrote:
> If you specifically don't want any X, I suggest strongly that you use
> aptitude interactively so that you can go back and forth if you choose
> something that wants to drag in X.
Nothing against doing it that way (interactively
On Tue, Nov 20, 2007 at 16:28:50 -0500, Paul Cartwright wrote:
> On Tue November 20 2007, Florian Kulzer wrote:
> > That seems OK to me. Which events are reported if you run "xev" and
> > press (separately) CTRL, ALT, and the Fn keys?
> # xev
[...]
> KeyPress event, serial 28, synthetic NO, windo
On Tue, Nov 20, 2007 at 16:45:45 -0500, Peter Smerdon wrote:
> Florian Kulzer writes:
[...]
> > Is your local loopback interface up and working? Check the output of
> > "/sbin/ifconfig".
[...]
> loLink encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> in
Florian Kulzer <[EMAIL PROTECTED]> writes:
> On Tue, Nov 20, 2007 at 11:28:45 -0500, Peter Smerdon wrote:
>> Jörg-Volker Peetz writes:
>>
>> > You need one of the xserver-xorg-video packages. There seems to be no X
>> > server on your machine.
>
> [...]
>
>> I installed xserver-xorg-video-all b
On Mon, Nov 19, 2007 at 08:40:12PM -0800, joseph lockhart wrote:
> i am wondering if anyone has found or created a
> terminal only version of debian (similar to the slax
> frodo) or if such a thing could be installed from the
> net install. let's just say that it is for special
> purposes though i
On Wed, Nov 21, 2007 at 12:39:58AM +0800, Augustin wrote:
Hello Augustin, I'll try to put comments in-line where they'll make
sense.
> I am set to buying a socket AM2 mainboard, with a slow CPU, a minimum
> amount of RAM and use the onboard graphic unit, but I would like to
> buy a fairly good/
On Tue November 20 2007, Florian Kulzer wrote:
> That seems OK to me. Which events are reported if you run "xev" and
> press (separately) CTRL, ALT, and the Fn keys?
# xev
Outer window is 0x261, inner window is 0x262
PropertyNotify event, serial 8, synthetic NO, window 0x261,
atom
On Mon, Nov 19, 2007 at 17:55:09 -0500, Paul Cartwright wrote:
> On Mon November 19 2007, Florian Kulzer wrote:
> > > users by doing the CTRL-ALT-F8/F7 or go to the text login by doing the
> > > CTRL-ALT-F1. when I am in a konsole window and I do the CTRL-ALT-F7, here
> > > is what it shows:
> > >
Hello,
Does anybody know of a few dynamic DNS service which redirects traffic
on port 80 to a different port on my machine (which has a dynamic IP)?
I need this because a friend of mine's univ allows outgoing access to
only port 80. I am thinking that if a dynamic dns service redirects
traffic on
On Tue, Nov 20, 2007 at 03:02:29AM +0100, SPKills wrote:
I just (re)installed debian etch on my machine, at the first reboot i
got some errors on my harddisk and i don't really know what it's
about... But i'm pretty sure it's good at all and i probably have to
worry about...
I tried to do
Henrique Rennó wrote:
I have a Windows XP machine connected to the Internet and an
additional network card with a fixed IP configured (192.168.0.5). I
connected a crossover network cable to my laptop in which I installed
Debian Sarge 3.1. I configured the network in /etc/network/interfaces
passin
I have a Windows XP machine connected to the Internet and an
additional network card with a fixed IP configured (192.168.0.5). I
connected a crossover network cable to my laptop in which I installed
Debian Sarge 3.1. I configured the network in /etc/network/interfaces
passing the correct configurat
On Tue, Nov 20, 2007 at 11:28:45 -0500, Peter Smerdon wrote:
> Jörg-Volker Peetz writes:
>
> > You need one of the xserver-xorg-video packages. There seems to be no X
> > server on your machine.
[...]
> I installed xserver-xorg-video-all but still have the same problem and
> no log file.
Is
Andrei Popescu wrote:
> On Tue, Nov 20, 2007 at 07:38:45PM +0100, Sjoerd Hiemstra wrote:
> > Kamaraju S Kusumanchi wrote:
> > > With mplayer, it gives the following error
> > >
> > > $mplayer shoutcast-playlist.pls
> > > ...
> > > ...
> > > Playing shoutcast-playlist.pls.
> > > Win32 LoadLibrary
Frank McCormick wrote:
On Tue, 20 Nov 2007 09:48:40 -0600
Hugo Vanwoerkom <[EMAIL PROTECTED]> wrote:
Loeghmon T. Nejad wrote:
I am learning Debian and I was wondering if it possible to install
two instances of Debian on the same machine. One as the production
workstation for the daily work, an
Kent West <[EMAIL PROTECTED]> writes:
> Peter Smerdon wrote:
>> I am starting x via gdm but if I use the startx command on tty1 I get:
>> ,
>> | giving up.
>> | xinit: Connection refused (errno 111): Unable to connect to X server
>> | xinit: No such processs (errno 3): Server error.
>> `
>
On Tue Nov 20 14:10:30 EST 2007, I wrote:
> I post occasionally to the mplayer forum ...
> I prefer to use sendmail. When I post a reply (here for example), I preserve
> threading as follows. I construct the message with mailto, manually add the
> References, and send it off with sendmail.
>
> Wi
Frank McCormick wrote:
On Tue, 20 Nov 2007 09:48:40 -0600
Hugo Vanwoerkom <[EMAIL PROTECTED]> wrote:
Loeghmon T. Nejad wrote:
I am learning Debian and I was wondering if it possible to install
two instances of Debian on the same machine. One as the production
workstation for the daily work, an
Hello Steve,
On 2007-11-20 20:10 +0100, Steve Kleene wrote:
> I post occasionally to the mplayer forum, which is archived at:
>
> http://lists.mplayerhq.hu/pipermail/mplayer-users/
>
> All posts there are done by e-mail. When I (or a responder) posts, it shows
> up there pretty fast. Much lat
Jörg-Volker Peetz <[EMAIL PROTECTED]> writes:
> You need one of the xserver-xorg-video packages. There seems to be no X
> server on your machine.
> --
> Regards,
> Jörg-Volker.
I installed xserver-xorg-video-all but still have the same problem and
no log file.
--
pgpLzsWFpbDPt.pgp
Descri
I post occasionally to the mplayer forum, which is archived at:
http://lists.mplayerhq.hu/pipermail/mplayer-users/
All posts there are done by e-mail. When I (or a responder) posts, it shows
up there pretty fast. Much later, I get a digest of the last few posts by
e-mail.
I prefer to use sen
On Tue, Nov 20, 2007 at 07:38:45PM +0100, Sjoerd Hiemstra wrote:
> Kamaraju S Kusumanchi wrote:
> > With mplayer, it gives the following error
> >
> > $mplayer shoutcast-playlist.pls
> > ...
> > ...
> > Playing shoutcast-playlist.pls.
> > Win32 LoadLibrary failed to load:
> > avisynth.dll, /usr/l
Kamaraju S Kusumanchi wrote:
> With mplayer, it gives the following error
>
> $mplayer shoutcast-playlist.pls
> ...
> ...
> Playing shoutcast-playlist.pls.
> Win32 LoadLibrary failed to load:
> avisynth.dll, /usr/lib/codecs/avisynth.dll, /usr/lib/win32/avisynth.dll,
> /usr/local/lib/win32/avisyn
On Nov 19, 2007, at 11:30 PM, andy wrote:
If I install Privoxy on my Deb machine behind a firewall, Privoxy
will trim out all of the junk that plugins currently do (e.g.
noscript and adbuster, etc.), as well as block cookies. It will not
mask/block my IP address however.
Right.
If I in
On Wed, Nov 21, 2007 at 12:39:58AM +0800, Augustin wrote:
>
> Hello,
...
>
> For the power supply, I am thinking to buy a 500~550 Watt, 80plus
> certified unit.
just a quick note on power supplies. Its not the total wattage that is
of concern, but how that power is distributed into the differ
Andrei Popescu wrote:
On Tue, Nov 20, 2007 at 04:30:12PM +0100, Shams Fantar wrote:
Andrei Popescu wrote:
On Mon, Nov 19, 2007 at 09:44:17PM +0100, Shams Fantar wrote:
Hi !
I try to pass a machine from etch to sid, so, I've changed the
sources.list file, all updates were be
On Tue, Nov 20, 2007 at 04:30:12PM +0100, Shams Fantar wrote:
> Andrei Popescu wrote:
>> On Mon, Nov 19, 2007 at 09:44:17PM +0100, Shams Fantar wrote:
>>
>>> Hi !
>>>
>>> I try to pass a machine from etch to sid, so, I've changed the
>>> sources.list file, all updates were been done.
>>>
>>> Bu
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 11/20/07 09:48, Bob Cox wrote:
> In article <[EMAIL PROTECTED]>,
> Ron Johnson <[EMAIL PROTECTED]> wrote:
>
>> On 11/19/07 16:06, Hugo Vanwoerkom wrote:
>>> Ron Johnson wrote:
On 11/18/07 22:19, hce wrote:
> Hi,
>
> I use scp to tr
jamesfoster writes:
> I have installed Debian 4.0 ETCH on an 'acer' laptop. I have followed
> the help pages to set up a modem based connection, but when I have the
> dialogue box...
What dialog box? Exactly what did you do and exactly what happened?
> Please help!
Run pppconfig as root and fol
On Tue, 20 Nov 2007 09:48:40 -0600
Hugo Vanwoerkom <[EMAIL PROTECTED]> wrote:
> Loeghmon T. Nejad wrote:
> > I am learning Debian and I was wondering if it possible to install
> > two instances of Debian on the same machine. One as the production
> > workstation for the daily work, and the other f
Kamaraju S Kusumanchi wrote:
> When trying to play a .pls file obtained from
> http://www.npr.org/audiohelp/progstream.html , I found that it works fine
> with kaffeine, amarok etc., but does not work with mplayer.
>
>
> With mplayer, it gives the following error
>
> $mplayer shoutcast-playlist
Hello,
As mentioned is a previous thread, my current computer is having some
hardware problems that prevent me from installing Debian (It is
currently running Mandriva).
Since I have some cash coming in, I am now definitely looking at
buying a new computer on which I will exclusively instal
Loeghmon T. Nejad wrote:
I am learning Debian and I was wondering if it possible to install two
instances of Debian on the same machine. One as the production
workstation for the daily work, and the other for experimentation,
testing software, add/remove apps, etc. I can then boot into the
partit
In article <[EMAIL PROTECTED]>,
Ron Johnson <[EMAIL PROTECTED]> wrote:
>
> On 11/19/07 16:06, Hugo Vanwoerkom wrote:
>> Ron Johnson wrote:
>>> On 11/18/07 22:19, hce wrote:
Hi,
I use scp to transfer a file, it displayed 50 KB/s. Does that mean 50
Kbit/s or 50 Kbyte/s?
>>>
>>> B
On Mon, Nov 19, 2007 at 09:10:21PM -0800, joseph lockhart wrote:
> >On Mon, Nov 19, 2007 at 08:40:12PM -0800, joseph
> >lockhart wrote:
> >> i am wondering if anyone has found or created a
> >> terminal only version of debian (similar to the
> >slax
> >> frodo) or if such a thing could be installed
Peter Smerdon wrote:
> Hello, I have a brand new HP pavillion laptop with debian unstable amd64
> installed.
>
> I cannot get x to start, but more worrying than that is that
> /var/log/Xorg.0.log does not exist, and never gets generated.
>
> here are the packages related to X that I have installe
Hugo Vanwoerkom wrote:
Shams Fantar wrote:
Hi !
I try to pass a machine from etch to sid, so, I've changed the
sources.list file, all updates were been done.
But now, I've some problems.
* Firstly, I've problems with my locales, for example :
* Secondly, as you can see it above, there
Andrei Popescu wrote:
On Mon, Nov 19, 2007 at 09:44:17PM +0100, Shams Fantar wrote:
Hi !
I try to pass a machine from etch to sid, so, I've changed the sources.list
file, all updates were been done.
But now, I've some problems.
[snip locales problems]
Welcome to sid, these are jus
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, Nov 20, 2007 at 09:56:21AM -0500, Loeghmon T. Nejad wrote:
> I am learning Debian and I was wondering if it possible to install two
> instances of Debian on the same machine. One as the production
> workstation for the daily work, and the other
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, Nov 20, 2007 at 02:42:09PM +, Jack Schneider wrote:
> Hi, folks
>
> I have lost my Desktop window borders. I am using Debian "lenny"
> updated. Problem occurred after an abortedattempt to install Compiz..
> I get the following error from t
Loeghmon T. Nejad wrote:
I am learning Debian and I was wondering if it possible to install two
instances of Debian on the same machine. One as the production
workstation for the daily work, and the other for experimentation,
testing software, add/remove apps, etc. I can then boot into the
partit
Hi, folks
I have lost my Desktop window borders. I am using Debian "lenny" updated.
Problem occurred after an abortedattempt to install Compiz.. I get the
following error from theSystem>preferences>windows menu..
" Cannot start the preferences application for your window manager.Window
manager
I am learning Debian and I was wondering if it possible to install two
instances of Debian on the same machine. One as the production
workstation for the daily work, and the other for experimentation,
testing software, add/remove apps, etc. I can then boot into the
partition that I like based on th
When trying to play a .pls file obtained from
http://www.npr.org/audiohelp/progstream.html , I found that it works fine
with kaffeine, amarok etc., but does not work with mplayer.
With mplayer, it gives the following error
$mplayer shoutcast-playlist.pls
MPlayer 1.0rc2-4.2.2 (C) 2000-2007 MPlaye
1 - 100 of 112 matches
Mail list logo
