Re: Unexpected irq trap when booting

Sorry I meant "noirq" is one kernel paramater and the other is "debug" :-) Zach On 6/23/07, Zach <[EMAIL PROTECTED]> wrote: Try booting with kernel parameter: noirqdebug Also try the kernel paramater: debug (this should show what exactly is at irq vector XXX) Zach -- To UNSUBSCRIBE, email

Re: Unexpected irq trap when booting

Try booting with kernel parameter: noirqdebug Also try the kernel paramater: debug (this should show what exactly is at irq vector XXX) Zach -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Where does mailman put...

On Fri, Jun 22, 2007 at 08:57:56PM -0400, Eric d'Alibut wrote: > ...subscriber name and email data. > > I have an old now-decommisioned mailman install and I've been asked to > go through the subscriber list for some info. Can't find it! /var/lib/mailman/lists/ It's all in those binary files. Mai

Re: Unexpected irq trap when booting

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Fri, 22 Jun 2007 00:47:04 GMT "s. keeling" <[EMAIL PROTECTED]> wrote: > Jacob S <[EMAIL PROTECTED]>: > > > > On Tue, 19 Jun 2007 17:34:43 -0700 > > Andrew Sackville-West <[EMAIL PROTECTED]> wrote: > > > > > On Tue, Jun 19, 2007 at 06:49:41PM -0

backports

I need to install "checkinstall" for Linux Debian etch, from backports, primarily on amd64 etch. To check viability, and modifying a recipe found for "sarge", I unsuccessfully tried with i386 by: (1) Adding this line to my /etc/apt/sources.list file deb http://www.backports.org/debian/ etch-backp

Re: help with "apt-get purge"

also you can always do: dpkg --purge zach On 6/22/07, Tshepang Lekhonkhobe <[EMAIL PROTECTED]> wrote: On 6/21/07, Mathias Brodala <[EMAIL PROTECTED]> wrote: > Hi. > > Tshepang Lekhonkhobe, 21.06.2007 15:55: > > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=133421 promised me > > that "apt-ge

Fwd: any realaudio plugin?

Argh. Tthis wanted to go to the list, not to the poster, my apologies... -- Forwarded message -- From: David Fox <[EMAIL PROTECTED]> Date: Jun 22, 2007 8:47 PM Subject: Re: any realaudio plugin? To: michael <[EMAIL PROTECTED]> On 6/21/07, michael <[EMAIL PROTECTED]> wrote: I

Re: Purge leaves some files

There are two possibilities: (1) you still have a package installed that owns those files. This is likely the case for the stuff under /usr/share/doc. You can find out which packages have installed a file with dpkg -S (filename). (2) the package is buggy and doesn't clea

Re: Sound card not working

On Fri, Jun 22, 2007 at 01:58:18AM -0500, Mike McCarty <[EMAIL PROTECTED]> was heard to say: > I am administering (or attempting to, anyway) a Debian install > on a machine a few years old. Debian is not recognizing the > sound card for some reason. I do hear a "pop" during boot, so > I suppose th

Re: Scripting Apt-Get (pop-up screens, e.g. with kernel updates)

On Fri, Jun 22, 2007 at 09:23:32AM -0400, Michael Matthews <[EMAIL PROTECTED]> was heard to say: > I am wondering if anyone can tell me if there's an easy way, when using > `apt-get upgrade`, to get around the pop-up configuration screens that occur > with some updates. One example of this is wit

Re: problems with radeon driver (solved)

Marcelo Chiapparini wrote: On Mon, 2007-06-18 at 14:26 -0300, Marcelo Chiapparini wrote: Hello, I am running etch in an amd64 system with an ATI Radeon Mobility 9200 (AGP) video card. The ATI driver from x.org doesn't work with this card, after a small GUI activity, the screen freezes. I've

dhcp3-client package (was Lost internet connection after upgrade(solved))

On Fri, 22 Jun 2007 22:18:54 -0400 Frank McCormick <[EMAIL PROTECTED]> wrote: > On Fri, 22 Jun 2007 18:55:53 -0700 > Andrew Sackville-West <[EMAIL PROTECTED]> wrote >bugs fixed in > subsequent releases (3 bugs) 1) #430064 [FIXED dhcp3 3.0.5-2]: New relaxed request usage breaks networking

Re: OT: Say NO to the Microsoft Office format as an ISO standard

Manon Metten wrote: Hi, This urgent request was posted on [EMAIL PROTECTED] by Hagar de l'Est < [EMAIL PROTECTED] >. Is not exactly Debian, but I think also of great importance for all of us. Please sign the petition here: http://www.noooxm

Re: ssh on lan by hostname instead of dynamic ip

On Jun 22, 4:30 pm, Tod Detre <[EMAIL PROTECTED]> wrote: >if you're machines are set up with > ipv6 and are on the same lan, just use the ipv6 local address. you can > get this by doing ifconfig and using the inet6 addr. It should start > with fe80. Yeah, ipv6 address are long and hard to remember

Re: Lost internet connection after upgrade(solved)

On Fri, 22 Jun 2007 18:55:53 -0700 Andrew Sackville-West <[EMAIL PROTECTED]> wrote: > so just out of curiousity, did you get to running 'route'? and if so > what did it show? with improper dhclient.conf sudo route Kernel IP routing table Destination Gateway Genmask Flags Me

Re: which program can read M$ Access file (.mdb)

So many software I have never heard of! I'd rather install a pirated version of M$ Office Thanks anyway! --- Andrew Perrin <[EMAIL PROTECTED]> wrote: > kexi-mdb-plugin - MS Access (MDB) driver for Kexi > libhk-classes-mdb - MS Access driver plugin for hk_classes > libmdbodbc - MDB tools ODBC modu

Re: Turning off the %^&* scroll wheel

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Friday 22 June 2007, Bob McGowan <[EMAIL PROTECTED]> was heard to say: > > == > > Section "InputDevice" > >         Identifier      "Configured Mouse" > >         Driver          "mouse" > >         Option          "CorePointer" > >        

Re: Lost internet connection after upgrade(solved)

On Fri, Jun 22, 2007 at 09:05:21PM -0400, Frank McCormick wrote: > On Fri, 22 Jun 2007 17:57:11 -0700 > Andrew Sackville-West <[EMAIL PROTECTED]> wrote: > > > > okay, how about the output of > > > > route > >I just found the problem. >This is the NEW dhclient.conf file. Notice the "requ

Re: which program can read M$ Access file (.mdb)

kexi-mdb-plugin - MS Access (MDB) driver for Kexi libhk-classes-mdb - MS Access driver plugin for hk_classes libmdbodbc - MDB tools ODBC module libmdbtools - mdbtools libraries mdbtools - JET / MS Access database (MDB) tools mdbtools-dev - mdbtools development files mdbtools-gmdb - JET / MS Access

Re: Lost internet connection after upgrade(solved)

On Fri, 22 Jun 2007 17:57:11 -0700 Andrew Sackville-West <[EMAIL PROTECTED]> wrote: > On Fri, Jun 22, 2007 at 06:57:26PM -0400, Frank McCormick wrote: > > On Fri, 22 Jun 2007 15:26:04 -0700 > > Andrew Sackville-West <[EMAIL PROTECTED]> wrote: > > > > > > > > > > Back again...with a different p

which program can read M$ Access file (.mdb)

openoffice? Food fight? Enjoy some healthy debate in the Yahoo! Answers Food & Drink Q&A. http://answers.yahoo.com/dir/?link=list&sid=396545367 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject

Where does mailman put...

...subscriber name and email data. I have an old now-decommisioned mailman install and I've been asked to go through the subscriber list for some info. Can't find it! -- No no no, my fish's name is Eric, Eric the fish. He's an halibut. I am not a looney! Why should I be tarred with the epithet l

Re: Lost internet connection after upgrade

On Fri, Jun 22, 2007 at 06:57:26PM -0400, Frank McCormick wrote: > On Fri, 22 Jun 2007 15:26:04 -0700 > Andrew Sackville-West <[EMAIL PROTECTED]> wrote: > > > > > > > Back again...with a different problem. Apt-get this afternoon updated > > > the > > > dhcp client package on my Sid installatio

Re: 2.6 kernel upgrade gives garbled video (w/o X11)

On Fri, Jun 22, 2007 at 11:51:30PM -, [EMAIL PROTECTED] wrote: > On Jun 22, 4:00 pm, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote: > > On Jun 22, 1:20 pm, Andrew Sackville-West > > > > > On Fri, Jun 22, 2007 at 06:12:42PM -, [EMAIL PROTECTED] wrote: > > > > Hi all, > > > > > > I recently a

Re: OT: Say NO to the Microsoft Office format as an ISO standard

On Friday 22 June 2007 10:32, Manon Metten wrote: > Hi, > > This urgent request was posted on [EMAIL PROTECTED] > <[EMAIL PROTECTED]>by Hagar de l'Est > < [EMAIL PROTECTED] >. > Is not exactly Debian, but I think also of great importance for all of us. It is important. But alas, we'll likely have

Re: Lost internet connection after upgrade

On Fri, 22 Jun 2007 23:39:36 + Waqar <[EMAIL PROTECTED]> wrote: > Same problem here. The ip address is getting assigned. I had > networkmanager, and it automatically used to update the resolv.conf > I found that it the automatically assigned was empty. I removed > networkmanager and related pa

Re: 2.6 kernel upgrade gives garbled video (w/o X11)

On Jun 22, 4:00 pm, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote: > On Jun 22, 1:20 pm, Andrew Sackville-West > > > > <[EMAIL PROTECTED]> wrote: > > On Fri, Jun 22, 2007 at 06:12:42PM -, [EMAIL PROTECTED] wrote: > > > Hi all, > > > > I recently attempted to upgrade my kernel from 2.4.27 to 2.6

Re: Lost internet connection after upgrade

I've tried a direct internet connection (w/o router) and that works. Its only when I'm behind the router that I get 101 NEtwork unreachable -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Lost internet connection after upgrade

Same problem here. The ip address is getting assigned. I had networkmanager, and it automatically used to update the resolv.conf I found that it the automatically assigned was empty. I removed networkmanager and related packages and manually set the /etc/ resolv.conf file. The network still does no

Re: apt-caher or approx?

El vie, 22-06-2007 a las 15:50 -0300, Andrés Ghigliazza escribió: > Hi there, > > We will soon have, 5 or 6 Debian boxs (servers and desktops), in our > LAN. We would like to know, if it is better to use apt-cacher o approx > for the updates. > > I couldn't find enough documentation of any of the

Re: /etc is gone

On Fri, Jun 22, 2007 at 09:47:06PM +, j j wrote: > > On 6/20/07, Karl E. Jorgensen <[EMAIL PROTECTED]> wrote: > > On Mon, Jun 18, 2007 at 08:54:30PM -0400, j j wrote: > > Hello > > > > I have been have trouble with my debian box(64 studio). i just > discovered that >

Re: Lost internet connection after upgrade

On Fri, 22 Jun 2007 18:51:17 -0400 Wayne Topa <[EMAIL PROTECTED]> wrote: > > Back again...with a different problem. Apt-get this afternoon updated the > > dhcp client package on my Sid installation and now I have lost my internet > > connection. The boot shows it is making the proper connection

Re: /etc is gone

On Fri, Jun 22, 2007 at 09:49:47PM +, j j wrote: > On 6/21/07, Bob McGowan <[EMAIL PROTECTED] > wrote: > > Karl E. Jorgensen wrote: > > On Mon, Jun 18, 2007 at 08:54:30PM -0400, j j wrote: > >> Hello > >> > >> I have been have trouble with my debian box(64 studio). i just

Re: /etc is gone

j j wrote: where do find all that is printed before i get a shell prompt? /var/log/? jj Probably not, if you're not getting a normal boot. In other words, if there are problems with a disk drive preventing the file system where /etc is from mounting (that's almost always /), then wherever /v

Re: Lost internet connection after upgrade

Frank McCormick([EMAIL PROTECTED]) is reported to have said: > > > Sending again as I don't **think** it worked the first time. > If its a duplicate I apologize in advance. > > Back again...with a different problem. Apt-get this afternoon updated the > dhcp client package on my Sid installat

Re: Lost internet connection after upgrade

On Fri, 22 Jun 2007 15:26:04 -0700 Andrew Sackville-West <[EMAIL PROTECTED]> wrote: > > > > Back again...with a different problem. Apt-get this afternoon updated the > > dhcp client package on my Sid installation and now I have lost my internet > > connection. The boot shows it is making the pr

Re: 2.6 kernel upgrade gives garbled video (w/o X11)

On Jun 22, 1:20 pm, Andrew Sackville-West <[EMAIL PROTECTED]> wrote: > On Fri, Jun 22, 2007 at 06:12:42PM -, [EMAIL PROTECTED] wrote: > > Hi all, > > > I recently attempted to upgrade my kernel from 2.4.27 to 2.6.18 on my > > Sarge installation. First off, I had to change my sources.list to use

Re: Lost internet connection after upgrade

On Fri, Jun 22, 2007 at 05:56:23PM -0400, Frank McCormick wrote: > [...] > > Back again...with a different problem. Apt-get this afternoon updated the > dhcp client package on my Sid installation and now I have lost my internet > connection. The boot shows it is making the proper connection to

Re: Waking up server during boot prevents NFS mounts after upgrade to etch

Malte Forkel wrote: > After upgrading the clients from sarge to etch, mounting NFS volumes > does not work anymore if the server wasn't up already. I think that should be considered a bug. Traditional behavior should have the clients block waiting for the server to come online and then continue n

Lost internet connection after upgrade

Sending again as I don't **think** it worked the first time. If its a duplicate I apologize in advance. Back again...with a different problem. Apt-get this afternoon updated the dhcp client package on my Sid installation and now I have lost my internet connection. The boot shows it is making

Re: Scripting Apt-Get (pop-up screens, e.g. with kernel updates)

Karl E. Jorgensen wrote: > # DEBIAN_FRONTEND=noninteractive apt-get install whatever In addition to this to be truly batch mode you may want to set DEBCONF_ADMIN_EMAIL="" too. # DEBCONF_ADMIN_EMAIL="" DEBIAN_FRONTEND=noninteractive apt-get install -q -y whatever That will prevent email from b

Re: Why stunnel3?

vince wrote: > Two versions of stunnel are available - stunnel3 and stunnel4. Normally > I would expect the higher numbered version to be the most recent and > better supported version. Agreed. But this is up to the package maintainer. You might want to file a BTS requesting it. > Form some re

Re: /etc is gone

where do find all that is printed before i get a shell prompt? /var/log/? jj On 6/21/07, Bob McGowan <[EMAIL PROTECTED]> wrote: Karl E. Jorgensen wrote: > On Mon, Jun 18, 2007 at 08:54:30PM -0400, j j wrote: >> Hello >> >> I have been have trouble with my debian box(64 studio). i just discover

Re: Sound card not working

Chris Lale wrote: dmesg indicates that a Via chipset has been detected: Via 686a/8233/8235 audio driver 1.9.1-ac3 The Alsa Soundcard Matrix[1] indicates that this is built into the motherboard ("VIA southbridge AC97 audio"). I just talked on the 'phone, and this is not a built-in card

Re: /etc is gone

Hi I usually use /mnt or media directories. No offense taken, you are making a point. But /proc directory is empty. weird! well, the biggest problem was my system wouldn't finish boot. boot ing proccess would hang around inittab error. I used a livecd to look around and discovered no /etc.

Lost internet connection after upgrade

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Back again...with a different problem. Apt-get this afternoon updated the dhcp client package on my Sid installation and now I have lost my internet connection. The boot shows it is making the proper connection to my cable modem, but neither Firefo

Re: Is there any chance to find out in which package the start-stop-daemon

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 > Is there any chance to find out in which package the start-stop-daemon > is w/o reinstalling the whole debian distribution and hopeing that it > will be installed automatically? I really like the program apt-file. It allows you to search all of the

Re: /etc is gone

Hi Daniel I will.. Thanks jj On 6/19/07, Daniel James <[EMAIL PROTECTED]> wrote: Hi jj, > I have been have trouble with my debian box(64 studio). i just discovered > that /etc directory is missing. I would recommend a clean install, because /etc stores most of your configuration files. Wi

Re: /etc is gone

no ssh. i will evaluatate firewall. thanks On 6/19/07, Christopher Nelson <[EMAIL PROTECTED]> wrote: On 2007-06-19, j j <[EMAIL PROTECTED]> wrote: > > I have only made backups of /home, but nothing else. I havent found > anything in /tmp nor /lost+found. i am not sure how i could have been >

Re: ssh on lan by hostname instead of dynamic ip

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 > Is there a way to use ssh and rsync using hostname instead of ip > address. It seems to me I've had this working once or twice, but then > it stops. You could set up your dhcp server to talk to a dns server and do your hostnames automatically, but i

Re: ssh on lan by hostname instead of dynamic ip

Chris Lale wrote: BartlebyScrivener wrote: Hello, I use unison and rsync on my home LAN. Everything works fine as long as I use ip addresses, for example, ssh [EMAIL PROTECTED] But my router (on home LAN) assigns dynamic ip addresses. So my scripts don't work if the router happens to assign a

Re: Sound card not working

Mike McCarty wrote: [having problems] I don't have direct access to the machine, but I'm going over to my friend's house this weekend, and I'll get back here next week early with results. Thanks to all who responded. Mike -- p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);} Op

Re: ssh on lan by hostname instead of dynamic ip

Chris Lale([EMAIL PROTECTED]) is reported to have said: > BartlebyScrivener wrote: > > Hello, > > > > I use unison and rsync on my home LAN. Everything works fine as long > > as I use ip addresses, for example, > > > > ssh [EMAIL PROTECTED] > > > > But my router (on home LAN) assigns dynamic ip

Re: hddtemp value

Quoting Pol Hallen <[EMAIL PROTECTED]>: Hi folks :-) Which value hddtemp show? (about my ata disks, between 45-55 C) Is it correct? Or I should worry? 45-55 C seems a little hot. They will probalby work for you but your drives will probably die sooner than later. Either they are too close

Re: lost sound after dist-upgrade

Kushal Kumaran it.iitb.ac.in> writes: > Check your xmms preferences. Is xmms using OSS or alsa output? OSS > is deprecated. OK. I changed the xmms output plugin from oss to alsa. Now I don't get an error message, but I also get no sound. >> I notice that I don't seem to have any alsa packag

Re: apt-caher or approx?

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 > I cannot compare with apt-cacher since i have never used it. I have not been impressed with apt-cacher. There have been several times I had to restart apache to get it to work again and a few times I had to go an manually delete a file because it wa

Re: Slightly annoyed question about Debian package system

Dirk <[EMAIL PROTECTED]> wrote: > Is there any chance to find out in which package the start-stop-daemon > is w/o reinstalling the whole debian distribution and hopeing that it > will be installed automatically? Man, that question doesnt sound slightly annoyed, it sounds downright frusturated ;-)

Re: Is there any chance to find out in which package the start-stop-daemon

On Friday 22 June 2007 13:41, Dirk wrote: > Is there any chance to find out in which package the start-stop-daemon > is w/o reinstalling the whole debian distribution and hopeing that it > will be installed automatically? In my Etch system, start-stop-daemon comes from the dpkg package: $ dpkg -S

Slightly annoyed question about Debian package system

Is there any chance to find out in which package the start-stop-daemon is w/o reinstalling the whole debian distribution and hopeing that it will be installed automatically? Dirk -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Is there any chance to find out in which package the start-stop-daemon

is w/o reinstalling the whole debian distribution and hopeing that it will be installed automatically? Slightly annoyed question about Debian package system X-Enigmail-Version: 0.95.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Is there

Re: Debian default ssh configuration problem with public/private key checking

On Fri, Jun 22, 2007 at 07:14:15PM +, - Tong - wrote: > Hi, > > I'm trying to setup Debian to accept my remote ssh > login. No problem with that, but I'm facing a > configuration problem: > > It doesn't seem to be able to handle/accept the public/private key > checking, i.e.,what sourceforg

Re: Connect to DOS box

On 15:09 Fri 22 Jun , Mike McCarty wrote: > John K Masters wrote: > > [snip] > > >However, to transfer the files I have to use a floppy disc. How can I > >connect the 2 boxes? The DOS box cannot boot from CD, has no installed > >OS (boots into network off floppy) and has only a serial connect

Re: Connect to DOS box

On 13:07 Fri 22 Jun , Andrew Sackville-West wrote: > On Fri, Jun 22, 2007 at 08:58:33PM +0100, John K Masters wrote: > > However, to transfer the files I have to use a floppy disc. How can I > > connect the 2 boxes? The DOS box cannot boot from CD, has no installed > > OS (boots into network

Re: mplayer problem

On Fri, Jun 22, 2007 at 09:20:56AM -0400, Thomas H. George wrote: > On Wed, Jun 20, 2007 at 10:02:12AM -0500, Hugo Vanwoerkom wrote: > > Thomas H. George wrote: > > >mplayer worked once, then no more. Using the iceape browser I went to a > > >www.whyy.org and connected to the sound stream - no pr

Re: compatible UPS - solved

On Fri, Jun 22, 2007 at 11:32:32AM -0500, Hugo Vanwoerkom wrote: > csanyipal wrote: > >On Fri, Jun 22, 2007 at 12:19:13PM +0200, csanyipal wrote: > > > >>Is this UPS supported by Etch? > >> > >>Inform Guard 600A (600VA)/Line Interractive/AVR > >> > >>Any advices will be appreciated! > > > >Sorry fo

Debian default ssh configuration problem with public/private key checking

Hi, I'm trying to setup Debian to accept my remote ssh login. No problem with that, but I'm facing a configuration problem: It doesn't seem to be able to handle/accept the public/private key checking, i.e.,what sourceforge.net is doing [1], but insists on checking login password [2], which is n

Re: ssh on lan by hostname instead of dynamic ip

BartlebyScrivener wrote: > Hello, > > I use unison and rsync on my home LAN. Everything works fine as long > as I use ip addresses, for example, > > ssh [EMAIL PROTECTED] > > But my router (on home LAN) assigns dynamic ip addresses. So my > scripts don't work if the router happens to assign a di

Re: Connect to DOS box

John K Masters wrote: [snip] However, to transfer the files I have to use a floppy disc. How can I connect the 2 boxes? The DOS box cannot boot from CD, has no installed OS (boots into network off floppy) and has only a serial connection spare. The network is 10BASE-2 thin ethernet. Smart Boo

Re: 2.6 kernel upgrade gives garbled video (w/o X11)

On Fri, Jun 22, 2007 at 06:12:42PM -, [EMAIL PROTECTED] wrote: > Hi all, > > I recently attempted to upgrade my kernel from 2.4.27 to 2.6.18 on my > Sarge installation. First off, I had to change my sources.list to use > the Etch packages because of a dependency loop involving libc6. what was

Re: apt-caher or approx?

On 22-06-2007, Andrés Ghigliazza <[EMAIL PROTECTED]> wrote: > Hi there, > > We will soon have, 5 or 6 Debian boxs (servers and desktops), in our > LAN. We would like to know, if it is better to use apt-cacher o approx > for the updates. > > I couldn't find enough documentation of any of them, to se

Re: Connect to DOS box

On Fri, Jun 22, 2007 at 08:58:33PM +0100, John K Masters wrote: > At work I use a networked box that runs from Novell Netware on DOS v5.0 > This runs very old accounting software. The box itself is a P120 with > 16 MB RAM and a small HD (about 128MB). No OS on the HD. [...] > > However, to trans

Connect to DOS box

At work I use a networked box that runs from Novell Netware on DOS v5.0 This runs very old accounting software. The box itself is a P120 with 16 MB RAM and a small HD (about 128MB). No OS on the HD. I have managed to persuade the somewhat ITphobic management to provide me a standalone box on which

Alternative to netselect

Hi, I had been able to use netselect before. When I tried it again just now, all sites end up with " ms 30 hops 0% ok". I'm wondering why netselect fails on me. My understanding is that netselect uses ping, but ping works fine for me, but traceroute not. That means netselect actually depen

Re: how hot is my xeon?

[EMAIL PROTECTED] wrote: On 6/22/07, michael <[EMAIL PROTECTED]> wrote: [...]... my box gets noisy and I'm trying to see if it's temp related as a precaution: clean all the air intakes, clean all heatsinks that have a cooler on them (it's just amazing what a difference cleaning can make) E

Re: how hot is my xeon?

michael: > > I've tried unsuccessfully to monitor my dual Xeon box but lm-sensors > doesn't seem to detect anything. I've a Intel Server Board SE7320SO2 > with two 3. GHz Xeon chips. Anybody know how to get mobo/chip/internal > temps (and pref fan speeds)... my box gets noisy and I'm trying to see

Re: MP3 to AMR

Kum Gabor <[EMAIL PROTECTED]> wrote: > No. Which package I need? And how ro convert! 1) Add the repository at http://www.debian-multmedia.org/ by adding the following line to /etc/apt/sources.list as root: deb http://www.debian-multimedia.org/ etch main 2) Add Christian Marillat's (repository ma

apt-caher or approx?

Hi there, We will soon have, 5 or 6 Debian boxs (servers and desktops), in our LAN. We would like to know, if it is better to use apt-cacher o approx for the updates. I couldn't find enough documentation of any of them, to see some features, before installing one. Thanks very much, tizo -- T

2.6 kernel upgrade gives garbled video (w/o X11)

Hi all, I recently attempted to upgrade my kernel from 2.4.27 to 2.6.18 on my Sarge installation. First off, I had to change my sources.list to use the Etch packages because of a dependency loop involving libc6. However, I did the kernel installation w/ "apt-get install kernel- image-2.6-686" and

2.6 kernel upgrade gives garbled video (w/o X11)

Hi all, I recently attempted to upgrade my kernel from 2.4.27 to 2.6.18 on my Sarge installation. First off, I had to change my sources.list to use the Etch packages because of a dependency loop involving libc6. However, I did the kernel installation w/ "apt-get install kernel- image-2.6-686" and

Re: MP3 to AMR

On Friday 22 June 2007 20:05, Andrew J. Barr wrote: > Kum Gabor <[EMAIL PROTECTED]> wrote: > > Hello All! > > > > I tried to find the way how to convert MP3 (or WAV) files to AMR (for > > mobile phone), but I can't. > > Can somebody help me? (I use Etch) > > Do you have the debian-multimedia.org re

Re: MP3 to AMR

Kum Gabor <[EMAIL PROTECTED]> wrote: > Hello All! > > I tried to find the way how to convert MP3 (or WAV) files to AMR (for > mobile phone), but I can't. > Can somebody help me? (I use Etch) Do you have the debian-multimedia.org repository installed? > Regards, > > Gabor > > -- Andrew J.

Re: compatible UPS - solved

csanyipal wrote: On Fri, Jun 22, 2007 at 12:19:13PM +0200, csanyipal wrote: Is this UPS supported by Etch? Inform Guard 600A (600VA)/Line Interractive/AVR Any advices will be appreciated! Sorry for this mail abowe. I find this link, which solve my problem: http://www.apcupsd.org/ And tha

Re: hddtemp value

Pol Hallen wrote: Hi folks :-) Which value hddtemp show? (about my ata disks, between 45-55 C) Is it correct? Or I should worry? I use hddtemp and have 3 disks: 2 ATA and 1 USB mounted. Hddtemp cannot read the USB mounted disk. Hda is Maxtor 6Y080P0: 28°C and is older Hdc is ST380011A: 39°

(g)mplayer stops

I have two machines both running uptodate Debian Testing. They both have Mplayer and mozilla-mplayer installed. One of them will play video from the web using Iceweasel and the other won't. On the one that won't I see a message saying 'buffering' then a short while later 'stopped'. Restarti

Re: Connected to DHCP server but cannot access internet

> Rehceb Rotkiv wrote: > > I can suddenly no longer access the internet with my Debian Etch (default > > kernel + updates). I get "Page not found" in Firefox and ping > > www.somesite.com says "unknown host". ifdown eth0 && ifup eth0 and the > > thereby invoked dhclient work as expected, that is I

Re: how hot is my xeon?

On 6/22/07, michael <[EMAIL PROTECTED]> wrote: [...]... my box gets noisy and I'm trying to see if it's temp related as a precaution: clean all the air intakes, clean all heatsinks that have a cooler on them (it's just amazing what a difference cleaning can make) and you can probably check the

Re: Which device did I boot from?

On Fri, 2007-06-22 at 19:37 +0200, Matus UHLAR - fantomas wrote: > > Dallas Clement wrote: > > > I'm trying to determine which device I booted Linux from at run-time. > > > I'd like to obtain the boot device's major/minor numbers or at least > > > it's name while executing an init script from initr

Re: how hot is my xeon?

michael wrote: On Fri, 2007-06-22 at 16:36 +0200, Pol Hallen wrote: I've tried unsuccessfully to monitor my dual Xeon box but lm-sensors doesn't seem to detect anything. Do u have the i2c kernel modules? Pol [EMAIL PROTECTED]:~/Fortran$ sudo lsmod|grep -i i2c i2c_dev 854

Re: Which device did I boot from?

> Dallas Clement wrote: > > I'm trying to determine which device I booted Linux from at run-time. > > I'd like to obtain the boot device's major/minor numbers or at least > > it's name while executing an init script from initramfs. why? On 21.06.07 13:07, Felipe Sateler wrote: > I don't know if t

Re: Turning off the %^&* scroll wheel

Curt Howland wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Friday 22 June 2007, Jonathan Kaye <[EMAIL PROTECTED]> was heard to say: The mouse/touchpad is controlled in /etc/X11/xorg.conf. Look for a Section "InputDevice" and if you see something like this: Option "ZAxisMapp

MP3 to AMR

Hello All! I tried to find the way how to convert MP3 (or WAV) files to AMR (for mobile phone), but I can't. Can somebody help me? (I use Etch) Regards, Gabor -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: [SOLVED] kqemu on Sid

Hugo Vanwoerkom wrote: Hugo Vanwoerkom wrote: David Baron wrote: On Tuesday 19 June 2007, [EMAIL PROTECTED] wrote: Hi, I installed qemu on Sid. But Sid's kqemu is backlevelled: it depends on a non-existing 2.6.18 kernel. So I compiled/installed http://fabrice.bellard.free.fr/qemu/kqemu-1.3

OT: Say NO to the Microsoft Office format as an ISO standard

Hi, This urgent request was posted on [EMAIL PROTECTED] <[EMAIL PROTECTED]>by Hagar de l'Est < [EMAIL PROTECTED] >. Is not exactly Debian, but I think also of great importance for all of us. Please sign the petition here: http://www.noooxml.org/petition. (Cookies have to be enabled for this site

Waking up server during boot prevents NFS mounts after upgrade to etch

Because my server is not running all the time, clients that want to mount NFS volumes use a small initscript during boot to wake up the server if necessary. After upgrading the clients from sarge to etch, mounting NFS volumes does not work anymore if the server wasn't up already. The initscrip

Re: Scripting Apt-Get (pop-up screens, e.g. with kernel updates)

Awesome, I changed that but I had to select "Noninteractive," and "Ignore questions with priority lower than ," and this worked to keep the kernel boot screen off. Thank you! On 6/22/07, Karl E. Jorgensen <[EMAIL PROTECTED]> wrote: On Fri, Jun 22, 2007 at 09:23:32AM -0400, Michael Matthews wro

Re: [PARTIALLY SOLVED] kqemu on Sid

Andrew Sackville-West wrote: On Thu, Jun 21, 2007 at 11:25:50AM -0500, Hugo Vanwoerkom wrote: So kqemu-1.3.0pre11 (the latest version) hangs the system solid with 2.6.21-1-k7, the Debian stock kernel. But I have modified that kernel with 2.6.21-ck2 from here: http://members.optusnet.com.au/cko

ssh on lan by hostname instead of dynamic ip

Hello, I use unison and rsync on my home LAN. Everything works fine as long as I use ip addresses, for example, ssh [EMAIL PROTECTED] But my router (on home LAN) assigns dynamic ip addresses. So my scripts don't work if the router happens to assign a different address that day to one of my machi

Re: Sound card not working

Chris Lale wrote: Mike McCarty wrote: [that he's having problems with a sound card] That's all I can think of. Hope that helps. Thanks! I'll give that a try, and read those pages. Mike -- p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);} Oppose globalization and One World

Re: how hot is my xeon?

michael wrote: I've tried unsuccessfully to monitor my dual Xeon box but lm-sensors doesn't seem to detect anything. I've a Intel Server Board SE7320SO2 Even if it did, unless you've calibrated the thing you won't know the temp. with two 3. GHz Xeon chips. Anybody know how to get mobo/chip/in

Re: Sound card not working

Ismael Valladolid Torres wrote: Mike McCarty escribe: Anyone have some hints as to how to proceed? Check out /proc/asound/cards. Cordially, Ismael Thanks, I'll give that a try. Mike -- p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);} Oppose globalization and One World G

  1   2   >