I build with all quantums now. They run good, fast and usually seems to be a
good
deal cooler then a seagate counter part.
The main deciding factor is they have quick warranty turn. Seagates policy is
CRAP! In the last 9 months I've used about 30 SCSI and IDE Fireballs, and half
dozen 4gb atla
The list server was down for most of the weekend. The kernel did not crash
but for some reason it wasn't responding to the network. Sorry.
Bruce
--
Can you get your operating system fixed when you need it?
Linux - the supportable operating system. http://www.debian.org/support.html
Bruce
I recently added some packages and somewhere during the installation I
got a question something like:
"Should I kill XDM"
I said yes and after the installation my X setup was broken.
I think it added xbooks but I don't believe I added xbase again which
I would expect to change everything. It re
First : my xterm has no color. Or, no, it has colors (when I do a ls
--color in it, it works) but when I launch a text based appli (such as
deselect for example) in it, it in in B & W... Why ?
Second : I have printing pbs. When I use the lpr command, it prints on
my printer but it prints some str
hello, all,
I tried to install the GIMP and xtar, and when trying to run both, I get
the same error message:
xtar: can't load library 'libXm.so.2' ...and:
gimp: can't load library 'libXm.so.2'
???
matty
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTEC
On Sun, 12 Oct 1997, Shaleh wrote:
> enables the cpu halt command, which lowers power usage on the cpu to 10%
> when the cpu is idle (most are idle about 70-90% of the time ). I can
> touch both my motherboard sink and cpu heatsink. Very noticeable
> difference. I tried to add the cyrix patch b
On Sun, Oct 12, 1997 at 04:05:54PM -0500, Ian Keith Setford wrote:
>
> Looking for info/HOWTO on installing and configuring the Pipe 15 ISDN
> terminal adapter/modem.
>
> Anyone know of driver developement for this device?
Does it require one? I thought it was just a dumb serial device like
a B
First pb : we must go to staroffice dir in order to start appli, we
cannot use symbolic links ?
Second pb, important !!! I cannot launch appli because it says that it
cannot connect to xprinter, and it asks me to set the XPPATH env var.
How can I do this ? I use linux debian 1.3.1 and my printer is
Hi,
I read some weeks ago about a StarOffice debianized package that was
in non-free, but I couldn't find it on ftp.debian.org, either in
non-free or hamm/non-free.
What happened to it? Is it so well hidden? I also made searches in
the Packages file for "staroffice", "star", "office" without re
This is probably going to sound stupid, but...
How does one enable the numeric keypad in an xterm? I've never actually
noticed that the keypad acts as cursor movement before.
[It's the weekend, I'm allowed to ask stupid questions :)]
D.
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the wo
Monthly, or more often, since installing Bo 1.3 on new system, I have had to
re-install man-db, after getting segmentation faults whenever executing man.
I don't believe this is related to libc6, as has been reported. It happens
at almost random times. Perhaps certain package upgrades have caus
Hi,
And thanks to everybody who answered my question. To summarise,
unless I am prepared to pay some money ( and I am not :-) ) there is no
straightforward solution. The only thing available is wp2latex which is
not in a Debian package. I 'll probably give it a try.
As far as MS-Word is concerne
> From: David Wright <[EMAIL PROTECTED]>
>
> Bo is the current stable release; hamm is unstable. The names are just
> codenames, which never change. ...
> For some reason, some people object to the user of these codenames (don't
> ask me why; every project in real life has a codename) so ...
Hi guys, I am wondering if there is any website on the net which provides us
freeware or software specifically for linux, something like tucows, nonags
or download.com for windooz.
thanks
kusuma
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Troub
Thanks to all that recently helped me with my 'peer refuses to
authenticate' problem.
Now I have gone 1 step further, and tried to implement callback for
security reasons.
I can does all of this manually by:
1) Connecting with minicom to the remote box
2) Logging in with a userid/password specifi
Tried compiling enlightenment but nrea the end I get this error:
ld: error: libc.so.6, needed by /usr/X11R6/lib/libXext.so, conflicts with
libc.so.5
make: *** [enlightenment] Error 1
cp: cannot create regular file `/usr/local/enlightenment/themes/DEFAULT':
No such file or directory
cp: cannot cre
I have 4 network cards a poor old 486-66. When I run route I see all
routes fine, except for the -net entries. These are displayed in dotted
quad instead of name.
/etc/networks contains the following:
localnet127.0.0.1
corenet 192.168.0.0
loannet 192.160.0.32
depnet
Well that script doesn't work (total brain failure). However this one
works in most circumstances. Unfortunately it's got a bit bigger and will
grow even larger when I add a bit more intelligence into it.
/* makes ftp script to download all packages
marked for install which are different from
On Fri, 10 Oct 1997, Marcus Brinkmann wrote:
> On Fri, Oct 10, 1997 at 05:25:56PM -0200, Nicola Bernardelli wrote:
> > Ok, for you HOWTO, I have isapnp working fine now.
>
> I find it *really* odd that you have to rearrange the order of the entrys in
> the isapnp.conf. A *quick* and *dirty* hack
> Simon Karpen wrote:
> Looking around, I notice I have a lot of WD drives:
>
> 4GB, 4 months old
> 1.6GB, 1 year old *
> 1.6GB, 2.5 years old
> 800MB, approx 4 years old (got second hand)
> 200MB, 5 years old
>
> * This drive isn't on 24/7. All the rest are, and most have been for their
> entir
Hello all,
I'm having trouble setting up leafnode to read news.
I installed leafnode w/o problems, followed the configuration
described in the README and README.debian files, as well as an article
in Linux Gazette #9. This article told me to log into my news server,
run 'fetch' as root, start a
I want to print all the nodes of mgetty info. If possible, I would like to
format it nicely before I print it.
Can I do it non interactively ?
In particular, is there something like "groff -man" ?
Thank you.
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe"
In my previous posting, I forgot to attach the isapnp.conf file with
the solution suggested by Marcus Brinkmann, here it is.
Also, I mentioned kernel 2.1.55 - err... I _have_ problems building
it at the moment - but forgot to say that I wanted to test it more for the
IPC SHMEM kernel fea
Ana Silva <[EMAIL PROTECTED]> writes:
> Sorry if my question is too sily but what is a compose Key?
> Is it for acentuation ?
Yes, in most cases.
You can compose a character using other characters with the compose
key. For example, you can get รถ (the german umlaut o just in case you
Has anyone successfully built Perl 5.004? I get all kinds of *.h files
not found errors, like /usr/include/time.h no such file or directory.
This is odd, because the files are definitely there.
Maybe I will have to wait for the .deb?!
--
Ken Gaugler N6OSK Santa Clara, California
email: [EMAIL P
I was installing 1.3.1, and had selected file-rc. It unpacked the
files, but when setting them up, I had quite a few packages give
warnings/errors in update-rc.d. Was this a bug? If I reinstall
without file-rc, then install it by itself later, is it safe to use?
--
TO UNSUBSCRIBE FROM THIS MAI
I'm trying to configure wu-ftp so my web/ftp users only see their home
directories and the public directory (of course the /bin and /lib dirs
also).. Currently, my web/ftp users can see their home directory, but
they can't do anything with their files (write/overwrite/etc).. It's as
if they don't
On Oct 08, Stephen Zander wrote
> Adrian Bridgett wrote:
> > Any ideas on how best to do this? I have installed a version of Socks5
> > and have symlink /usr/bin/ftp to point to /usr/bin/rftp. This works fine.
>
> What sort of fire-wall? Does it support
>
> user @
Hmm - don't know. I (so
> WD is the only brand that I have seen go belly-up without warning. I am told
> that WD has recognized the problem and has applied fixes.
The only drive I've lost was a WD one. But I have plenty of other WD drives
that haven't given me any grief. I've had no problems with my Quantum
drives ei
Simon Karpen <[EMAIL PROTECTED]> writes:
> Which WD drives have you had good luck with?
>
> I have yet to see a recent one last more than a year...
I have several (3) old Caviar drives. One is a 170 meg and the other
two are 540 meg. One is six years old; the other, probably about 5;
and the t
Is there anyway to disable user mail, so the user can not receive mail
(the system replies that the user is unknown, etc)? I'm currently using
smail+procmail and I'd rather not switch MTAs.
Possibly by using the .forward file (I couldn't find any help on it)?
-Paul
--
TO UNSUBSCRIBE FROM THIS
On Tue, 7 Oct 1997, Shaleh wrote:
> I have never had an ounce of problem with my chip. I have a 150+ that
> behaves well. The problem I have seen is that everyone uses the wrong
> clock setup. My 150+ is actually a 120Mhz. The other problem I have
> seen is that not everyone makes motherboards
Yeah, I'm using it... it works fine if I just enable to reconition. If I
try to enable the special features I run into big problems.. probably
because my chip is 'IBM 6x68 166+' and not 'Cyrix' (I thought they were
the same)
-Paul
On Mon, 6 Oct 1997, Shaleh wrote:
> Is there a patch against 2.
I've done this. I have a ne2000 connected to a cable modem and a 3c590
combo connected to two win95 machines with BNC.
I'll assume both interfaces work fine.
something like this to your /etc/smb.conf file (global section):
interfaces = 192.168.100.0/24 198.109.162.43/255.255.255.224
On Mon, 6 Oct 1997, George Bonser wrote:
>
> On 07-Oct-97 Adam Heath wrote:
> >>On Mon, 6 Oct 1997, Shaleh wrote:
> >>
> >>> Is there a patch against 2.0.29 for cyrix chips?? Is anyone using it??
> >>
> >>I tried the patch for 2.0.30 kernels (on a 2.0.30 kernel, of course) and
> >>it locked up
On 12-Oct-97 Paul Miller wrote:
>
>I think that is because your chip is over-heating.. (common problem) I
>bought a jet fan w/ barings and it has never frozen with my 6x86 166+ ..
>although performance is another thing.
>
>-Paul
>
I agree. BTW, I found some reading on the subject at:
http://
Behan Webster writes:
> I have xlockmore installed on my system here with shadow turned on.
> I know it's supposed to work (because other machines on our localnet
> are configured seemingly exactly the same and xlock works there).
>
> griffon:~> ls -l /etc/passwd /etc/shadow /usr/bin/X11/xlock
> -
Timothy Phan writes:
> Hi,
>
> Would someone build the debian package for MySQL and other MySQL related
> such as mySQL-perl, mySQL-tcl, mySQL-JDBC, mySQL-ODBC on 1.3? I've
> downloaded the one in hamm/ and it requires libc6 which my
> debian box is not yet upgraded.
The most easiest way
Are the list server(s) ok or is it just me ?
Peter
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
The general message is: if you are new to unix, watch out for line
continuation characters (I know I read something describing them that way
somewhere, and mayby in certain types of config files they are, but...).
They are really escape characters that refer specifically to the newline
THAT MUST
On Sat, Oct 11, 1997 at 10:14:40PM -0200, Nicola Bernardelli wrote:
> On Fri, 10 Oct 1997, Marcus Brinkmann wrote:
>
> > On Fri, Oct 10, 1997 at 05:25:56PM -0200, Nicola Bernardelli wrote:
> > > Ok, for you HOWTO, I have isapnp working fine now.
> >
> > I find it *really* odd that you have to re
> Could someone help me with netcat. I use the debian package installation
> method. Grab the package off the debian ftp site. It verified that it was
> installed. I try running it by typing netcat and file was not found. I did
> man -k netcat and no man pages were located. I can't find the binary
Paul Miller wrote:
>
> On Tue, 7 Oct 1997, Shaleh wrote:
>
> > I have never had an ounce of problem with my chip. I have a 150+ that
> > behaves well. The problem I have seen is that everyone uses the wrong
> > clock setup. My 150+ is actually a 120Mhz. The other problem I have
> > seen is th
On Sat, Oct 11, 1997 at 10:14:40PM -0200, Nicola Bernardelli wrote:
> On Fri, 10 Oct 1997, Marcus Brinkmann wrote:
>
> > On Fri, Oct 10, 1997 at 05:25:56PM -0200, Nicola Bernardelli wrote:
> > > Ok, for you HOWTO, I have isapnp working fine now.
> >
> > I find it *really* odd that you have to re
On Sat, Oct 11, 1997 at 10:14:40PM -0200, Nicola Bernardelli wrote:
>
> BTW, why does the sound module say what follows at each startup, when I
> have the default 4megs on the soundcard? (Sure, on some readme...)
>
> AWE32 Sound Driver v0.3.3e (DRAM 28672k)
Mmmh. Because it can't detect you
What XFree86 version is this? I'm running a Mystique, so can't afford
to downlevel.
Richard Nelson
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Hello!
I worked the last days on a Soundblaster AWE HOWTO, so that the information
gathered on this list (remember the thread about the AWE64?) would not be
lost.
All information (and a little more) you need to install the Soundblaster 32,
SB AWE 32, SB AWE 64 on a Linux system are gathered here
I'm thinking about getting a TV PC card (TV on the PC, not for capturing)
and I'm wondering if (1) Linux supports these cards and (2) what kind
should I get?
I want to have full screen TV quality (or better) and be able to hear
sound (currently I have a SB16 and planning to upgrade to a AWE64 gold
Hi,
Does any one have a SCSI zip & SCSI zip accelerator card and were able to
get these recognized during installation?
I am trying to repartion & reinstall debian 1.3, and seem to get through
most steps except getting the ZIP drive to work. I also notice that after
each step of the installation
In xconsole, I keep getting messages like '..timeoutd[187]: Could not open
/dev/ttyp0 for checking line discipline - idle limits will be enforced' ..
is this normal? I don't remember seeing these messages before.
-Paul
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[
Is there an installer which will work for netscape v304 rather than 301 ??
Andy
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
I have not recieved anything in 3 days. I have submitted 2 items which
appear to have gone ok, and yesterday I resubscribed.
Thanks
--
Walter L. Preuninger IIwaldo @ irc.wasteland.org:#unix
[EMAIL PROTECTED] http://www.rapidramp.com/~walterp
Hi!
When trying to install Perl 5.004 (which Apache 1.2.4 depends on) I ran
into the following problem.
Perl 5.004 pre-dependends on libgdbmg1 (note the last g), but
libgdbmg1_1.7.3-21 conflicts with ligdbm_1.7.3-19 (that came with my Debian
1.3.1 installation). And to uninstall libgdbm1 requires
On Thu, 9 Oct 1997, LeRoy D. Cressy wrote:
> > Further to this problem I have experimented some more and have the
> > following results, all on the one machine, using different cards,
> > attempting to run netatalk on the same network:
> >
> > Card Description: Driver (Modul
I have just updated my servers to the latest stuff in bo (arrived on my
mirror on Saturday). The free command now gives weird output, like this:
ns1# free
total used free sharedbuffers cached
Mem:386536 380196 6340 22472 202704
-/+ b
Looking for info/HOWTO on installing and configuring the Pipe 15 ISDN
terminal adapter/modem.
Anyone know of driver developement for this device?
Thanks.
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
* needs to kill all processes left open by the user on logout
* will ONLY kill those processes open on the tty which is being logged off
* also works for xdm
any ideas? .bash_logout?
-Paul
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble?
>> I use a debian box running smail as our local and Internet mail server for
>> our lan. Is there an easy way I can setup smail to process mail that should
>> be delivered locally immediately but queue up mail bound for the Internet
>> and send it all out once every 30 minutes?
>>
>> Thanks in ad
>libgdbmg1_1.7.3-21 conflicts with ligdbm_1.7.3-19 (that came with my Debian
So get libgdbm_1.7.3-21 from the same place you found libgdbmg1_1.7.3-21...
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
59 matches
Mail list logo
