Hello Andreas,
I'm a fan of team-maintained packages - I just set the maintainer field to
DPMT in the git repo.
Thanks!
Federico
Hi Andreas,
Sure, go ahead, and thank you for taking care of the bug!
--
Federico
I tried purging the mono font packages, then supertuxkart and then
reinstalling supertuxkart from scratch.
This way the installation was working fine.
I do not know what happened (why the first installation of supertuxkart did
not work), but I solved the problem.
So you can close this bug I guess
Package: supertuxkart
Version: 1.4+dfsg-2
Severity: grave
Justification: renders package unusable
X-Debbugs-Cc: matta2...@gmail.com
Dear Maintainer,
after clean apt install, STK does not start.
[info ] SharedGPUObjects: Hardware Skinning enabled, method: TBO, max bones:
1024
[info ] ShaderFi
Adding to this thread/bug-report per salt project and Debian packaging, salt
is unfortunately probably not a good candidate for the Debian ecosystem.
The salt project current (2023-04) published lifecycle only lists 1.5 years of
support for typical releases. After that their "extended life suppo
close 1026470
thanks
close 1026515
thanks
close 1002336
thanks
close 1010119
thanks
Control: tag -1 pending
Hello,
Bug #987257 in unixcw reported by you has been fixed in the
Git repository and is awaiting an upload. You can see the commit
message below and you can check the diff of the fix at:
https://salsa.debian.org/debian-hamradio-team/unixcw/-/commit/6503634e26a44a807366cf
Thank you Andreas for the notice. The bug has been confirmed and we're
exploring alternate binary names.
donfede
Control: tags -1 + confirmed
signature.asc
Description: PGP signature
> I guess something went wrong with the upload, because the changes file has
> both
Indeed the upload of 1.4.6-1 was only meant for Experimental and I'm
surprised it landed into Sid.
Any way to revert Unstable?
Thanks!
--
Federico
Fully recognizing we all must balance multiple priorities, I'm still waiting
to hear back from active Salt maintainer(s) to progress closing this bug.
Until the bug can properly be closed and given these CVE bugs do not apply to
Debian, with the goal of preventing Salt from being autoremoved from
In brief, like carnil had suggested above, my review and findings concur that
#985085 and CVE-2021-25315 are SUSE specific and do not apply to Debian.
Thanks to Miuku of #suse on freenode for his helpful feedback accessing the
SUSE src.rpm . I'll leave the bug open a few days, allowing for additi
It appears a simple git commit upstream corrects this bug.
https://github.com/loads/molotov/commit/5e8854d95a74fb8820020335a8368c19f9f658b4?branch=5e8854d95a74fb8820020335a8368c19f9f658b4&diff=unified
Thanks to tianon on #debian-mentors for sharing this solution and link.
Control: tag -1 patch
close 952099
thanks
A new version without Python 2 is being uploaded.
--
Federico
Hi Jeremy,
there is RFS for cyclograph https://bugs.debian.org/869692
I think we should discuss packaging there.
Thanks for your help
--
Federico
Package: wrk
Version: 4.0.2-2
Severity: grave
The error makes wrk unusable:
wrk -d 3 http://localhost:8080/
PANIC: unprotected error in call to Lua API (attempt to index a nil value)
-- System Information:
Debian Release: buster/sid
APT prefers unstable
APT policy: (600, 'unstable'), (1, 'e
ad it.
Please let me know if any of these solutions can cope with the bug.
--
Federico
Package: python-signedjson
Version: 1.0.0-2
Severity: grave
Justification: renders package unusable
python-signedjson 1.0.0-2 contains no Python files.
-- System Information:
Debian Release: 9.0
APT prefers unstable
APT policy: (600, 'unstable'), (500, 'stable')
Architecture: amd64 (x86_64)
$PATH leading to oversteeping.
Steps to reproduce: Check [1] or make tea.
[1] https://packages.debian.org/stretch/amd64/xcowsay/filelist
--
Federico
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (600, 'unstable')
Architecture: amd64 (
rg/cgi-bin/bugreport.cgi?bug=770232
--
Federico Gimenez
fgime...@canonical.com
From 3598bd9e37408482c0f9f81bc2b3a4e77c018057 Mon Sep 17 00:00:00 2001
From: Federico Gimenez
Date: Tue, 19 May 2015 16:44:40 -0400
Subject: [PATCH] Initial import
---
debian/changelog
Just for the record this patch removes all the binaries, inclluding the .so
files and adds support for Python3.
Thanks,
On Wed, May 20, 2015 at 2:34 AM, Thomas Goirand wrote:
> Here's a patch provided by Federico Gimenez <
> federico.gimenez.ni...@canonical.com>. Please con
Package: startupmanager
Version: 1.9.13-8
Severity: critical
Justification: breaks the whole system
Dear Maintainer,
Bootloader menu resolution breaks jessie boot.
Reproduce:
1) Go in Startupmanager --> Advanced.
2) Set Bootloader menu resolution to 800x600 or higher.
3) Close startup manager.
Package: pitivi
Version: 0.93-4.1
Severity: grave
Justification: renders package unusable
pitivi is currently unusable due to the following bug:
https://bugzilla.gnome.org/show_bug.cgi?id=735529
It's fixed upstream, please release a new minor version of 0.93.
Thanks
Federico
-- S
Package: totem
Version: 3.12.2-1
Severity: grave
--- Please enter the report below this line. ---
$ totem
(totem:10016): Gdk-ERROR **: The program 'totem' received an X Window System
error.
This probably reflects a bug in the program.
The error was 'BadMatch (invalid parameter attributes)'.
(D
Hi Lucas, thanks a lot for your report, I'm already working on it.
Cheers,
2014-07-03 20:27 GMT+02:00 Federico Giménez Nieto :
> Ok, I'll try to recover the changes from 0.12.0-8 and ping you back with
> the results.
>
>
I reverted the changes from
http://anonscm.debian.org/gitweb/?p=pkg-gnustep/gnustep-dl2.git;a=commit;h=db291a8d904a5b69ef8ede00dd3
h I suspect it'll work with these changes. Federico, could you
> please try it? (You don't need to rebuild gnustep-base as gnustep-dl2
> is not affected by the message forwarding bug, AFAICT.)
>
Ok, I'll try to recover the changes from 0.12.0-8 and ping you back with
the r
r.
>
> The bad news is that stable is affected so an update has to be
> prepared.
>
--
Federico Giménez Nieto
fgime...@coit.es
Thanks Yavor, I've uploaded a new version with the patch you suggested and
a few more changes. All seems to be working fine, you can take a look here
[1]
Cheers
[1]
http://mentors.debian.net/debian/pool/main/g/gnustep-dl2/gnustep-dl2_0.12.0-11.dsc
all evaldemo.py example
Bye,
Federico
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (600, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.13-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8)
Shell: /
Package: bluetooth
Followup-For: Bug #740462
Hello maintainers and thank you for packaging bluez & co.
I'm attaching an excerpt from kern.log that contains some more data.
Thanks!
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (600, 'unstable')
Architectur
3.13.0-rc7 apparently fixed the issue. It may have been fixed on
3.12.6 but I didn't test that one.
I've just tested my backup script which puts some load on a couple of
GFS2 filesystems. Last week this would have caused an almost instant
crash but this time it finished without issues.
--
To UN
I didn't say it was the same, just that is has some similarities.
Both have GFS2 on top of active/active drbd and both break when there
is some load in the GFS2 filesystem (my first crash a few weeks ago
was with a "rm -rf")
I agree they affect different functions but they still have some
things in
Looks somewhat similar to
https://bugzilla.redhat.com/show_bug.cgi?id=1023431
disabling send_page didn't work.
something a simple as a "tar" from one gfs2 to another made it crash again.
:-(
I'm going to test setting this parameter (although I don't use Xen):
http://www.drbd.org/users-guide/s-xen-drbd-mod-params.html
Googling around there seems to be a relation between Oops, drbd
active/active and this setting.
DRBD source code says this which sounds like it could be related:
Package: gdm3
Version: 3.8.4-3
Followup-For: Bug #724731
I managed to solve by removing and reinstalling the following packages,
as suggested in commment 71:
gnome-core gnome-shell gdm3 gnome-session
When I reinstalled, I see more packages than those removed. Maybe it's
a hint to find the culprit
Installing libpam-systemd worked on another laptop of mine, but it doesn't
work in a laptop which has the same debian version.
I've tried all the workarounds suggested here, but none works.
Please note that the same problem occurs if I use lightdm. I can login,
then the screen remains empty (only
It might be related, I cannot uninstall dolibarr:
# aptitude purge dolibarr
The following packages will be REMOVED:
dolibarr{p} libgmime2.6-cil{u} libproxy0{u}
0 packages upgraded, 0 newly installed, 3 to remove and 2 not upgraded.
Need to get 0 B of archives. After unpacking 35.9 MB will be fre
Thanks Eugen!
Installing libpam-systemd worked also for me
It also happens on Wheezy (stable) if kernel 3.9 is installed from
wheezy-backports.
-- System Information:
Debian Release: 7.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/2 CPU cores)
Locale: L
Package: frescobaldi
Version: 2.0.8+ds1-1
Severity: grave
Justification: renders package unusable
There is a conflict of versions, here's the console output:
Traceback (most recent call last):
File "/usr/bin/frescobaldi", line 3, in
import frescobaldi_app.main
File "/usr/lib/python2.7/di
Hi, thanks for your bug report. I'll try to fix it as soon as possible.
Cheers,
-- Federico
om ldtp import *
getapplist()
Expected result: linguist in the application list.
Actual result: empty list.
I installed gnome-orca and when I launch it with the -l option no application
gets listed.
I'm not sure if this is enough to raise the severity to critical.
Regards
Federico
-- System
.
Federico
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
V
est
solution.
I'm federico2 on freenode if you like to test it together.
Thanks!
--
Federico
Package: lilypond
Version: 2.14.2-2
Severity: grave
Justification: renders package unusable
Dear Maintainer,
I upgraded the package from previous version (2.12).
New version never worked. I get a segmentation fault with any
simple file, /usr/share/lilypond/2.14.2/ly/Welcome_to_LilyPond.ly
includ
/mentors.debian.net/debian/pool/main/g/gnustep-dl2/gnustep-dl2_0.12.0-7.dsc
Thanks, cheers,
Federico
-- Forwarded message --
From: Federico Giménez Nieto
Date: 2011/9/10
Subject:
To: cont...@bugs.debian.org
tags 629204 patch
thanks
--
Federico Giménez Nieto
fgime...@coit.es
2011-08-17 Federico Gimenez Nieto
* Modified function calls for Modern GNU Objective-C runtime
Hi,
I've written a patch that seems to work with both gnustep-base/1.20 and 1.22.
I'm waiting for
upstream's approval [1], it can be grabbed here [2] if anyone wants to test it.
Cheers,
Federico
[1] http://lists.gnu.org/archive/html/gnustep-dev/2011-08/msg00095.html
[2] git:/
Package: empathy
Version: 2.30.3
Severity: grave
Tags: wheezy
Justification: renders package unusable
I just upgraded from squeeze the whole system, but this dependency hasn't been
fixed.
I had installed libebook-1.2.so.10 instead of libebook-1.2.so.9, and
libedataserver-1.2.so.14 instead of lib
ilt the package
on stable...
Thanks a lot, cheers
Federico
[1] http://bugs.debian.org/622674
[2] http://www.doctrine-project.org/blog/doctrine-security-fix
[3] http://mentors.debian.net/debian/pool/main/d/doctrine/doctrine_1.2.4-1.dsc
signature.asc
Description: OpenPGP digital signature
Hi, thanks for your bug report. I'll try to prepare a fixed package as soon as
posible.
Cheers,
Federico
On 04/13/2011 08:45 PM, Moritz Muehlenhoff wrote:
> Package: doctrine
> Severity: grave
> Tags: security
>
> Please see http://www.doctrine-project.org/blog/d
On 03/15/2011 05:39 PM, Yavor Doganov wrote:
>
> Without investigation: most probably this is related to the new
> behavior of GCC 4.5 to bail out immediately if an #include'd header is
> not present.
>
Thanks Yavor, i'll prepare the fixed package.
Cheers
Hi, thanks for the bug report.
It seems that this may be related to some higher level package, affecting
[1] too. I'll try to investigate more deeply, cheers
Federico
[1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=618184
Thanks for the report!
I had a new version ready for release to fix #592860 as well but it
was on hold due to the freeze.
I have just asked permission to upload to t-p-u
Bye,
--
Federico
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubs
n?) even
on i386, see [1]
Thanks again for the sponsorship, cheers
Federico
[1] https://bugs.launchpad.net/ubuntu/+source/doctrine/+bug/683150
Hi Alexander,
Alexander Reichle-Schmehl wrote:
> Hi!
[...]
>
> Has there been any progress with this bug?
None so far...
> I see the new package is
> still on mentors, but I don't think the release managers will accept a
> new upstream release at this stage of the freeze, therefore I'm
> cur
to prepare an architecture specific
version, what do you think?
Thanks,
Federico
signature.asc
Description: OpenPGP digital signature
test 3.14.1 in OGRE PPA:
>
> https://launchpad.net/~ogre-team/+archive/ogre/+packages
>
> FreeImage is a dependency of OGRE 3D and I'm working with that engine.
I was the original maintainer of Ogre and related packages. Lately I
reduced a lot my involvment in Debian but I can check
As i can't reproduce the bug i can't prepare a fix for it. Don't hesitate to
make the NMU if you feel that it is needed and you are sure that it won't
introduce any flaws. Anyway, in my opinion it would be a good idea to report
this upstream, it can be done at [1]
Cheers
you please review it and let me
know if it works for you?
Cheers
Federico
Federico Gimenez Nieto wrote:
> Hi Thomas, this warning only appears if you require
> 'XML/Unserializer.php' (that is, you are going to unserialize a xml
> string) and only if you have set your error le
nts to return a xml document it can be done without noticing any
warning. Hence the severity of the bug shouldn't be 'serious'.
I'll forward this bug upstream and try to work on a patch by myself.
Cheers,
Federico
Thomas Goirand wrote:
> Hi,
>
> I simply have
t could be at
least not well formed.
But the warnings that you found are refering to code in the
Unserialize.php file, how are you getting them?
Cheers,
Federico
Thomas Goirand wrote:
> Package: php-xml-serializer
> Version: 0.20.0-2
> Severity: grave
>
> Hi,
>
> When u
for 1.2.2 version.
I'll keep trying to find the cause of the problem and post here any
progress.
Cheers,
Federico
signature.asc
Description: OpenPGP digital signature
Yavor Doganov wrote:
>
> I think you actually need Conflicts, because Replaces would sneakily
> replace libraries in the old package,
Ok, it is corrected and reuploaded, i'll try to find a sponsor now.
Thanks
Federico
signature.asc
Description: OpenPGP digital signature
Hi, i've uploaded a new version of gnustep-dl2 stating that
libgnustep-dl2-0d replaces libgnustep-dl2-0. I hope that this will
resolve the issue, could you please take a look [1]?
[1]
http://mentors.debian.net/debian/pool/main/g/gnustep-dl2/gnustep-dl2_0.12.0-5.dsc
Cheers
Federico
Yavor Do
Hi,
Mehdi Dogguy wrote:
> Do you have a sponsor for this upload? If not, I can upload it. I'll
> just wait for gorm.app and renaissance to be available on all
> architectures and then proceed with the upload. Is this ok for you?
>
Of course, thanks a lot! :)
Cheers,
Federico
Yavor Doganov wrote:
> В 09:58 +0200 на 23.08.2010 (пн), Federico Gimenez Nieto написа:
>> Thanks for the clarification, i am pretty lost here.
>
> I'd be glad to explain in detail if you let me know what you find
> confusing.
>
Thanks, with your previous explana
nd adjust the EOControl entry for
> soname change.
>
I've uploaded to mentors a new version with all these changes applied,
could you please take a look [1]?
[1]
http://mentors.debian.net/debian/pool/main/g/gnustep-dl2/gnustep-dl2_0.12.0-4.dsc
Cheers,
Federico
signature.asc
Description: OpenPGP digital signature
can't
> notice it in sid, but it will become RC when the new Base is uploaded
> in unstable. It is fixed upstream, easily backportable, but
> unfortunately the change is ABI-breaking for EOControl :-(.)
>
Is there any chance to prevent this FTBFS while keeping EOControl in
good sh
ow
the docs are not being generated, why might this be happening?
Cheers,
Federico
signature.asc
Description: This is a digitally signed message part
apt-get source python-qscintilla2
debuild -us -uc
You'll need the following libraries: libqt4-dev python-all-dev
python-sip-dev python-qt4-dev
sudo dpkg -i python-qscintilla2_2.4.3-1_i386.deb
(No need to reinstall the other qscintilla libraries)
Bye,
--
Federico
--
To UNSUBSCRIBE, email
directory does not help.
Thank you,
Federico
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8
(charmap=ANSI
modules/Preferences/sip.pyc", O_RDONLY|O_LARGEFILE) = -1
ENOENT (No such file or directory)
--- SIGSEGV (Segmentation fault) @ 0 (0) ---
+++ killed by SIGSEGV +++
Segmentation fault
On a eric instance running on Debian Testing instead of the segfault there
would be:
close(5)
I know that kde3 knetworkmanager is not mantained upstream but I think
its dependecy should be corrected: it requires network-manager >= 0.7
< 0.7.999
It may be too late for this.
Cheers
Federico
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subj
Package: console-tools
Version: 1:0.2.3dbs-67
Severity: grave
Justification: renders package unusable
su
apt-get -f install
Leyendo lista de paquetes... Hecho
Creando árbol de dependencias
Leyendo la información de estado... Hecho
0 actualizados, 0 se instalarán, 0 para eliminar y 3 no actu
drive.com/public/4cb78428ae7c9ed81d7330c916ebab53e96dce709669d36bb07f1cf5f52e8865.html
Hope this helps, cheers,
Federico
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Hi Jonas,
This seems to be fixed with the
latest version of php-pear, 5.2.11.dsfg.1-1, could you please check if
it is properly working?
Thanks,
Federico
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Conta
Hi,
This seems to be fixed after the upload of 5.2.11.dsfg.1-1.
Thanks,
Federico
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
In bug report module and class name are inverted.
In my installation of Lenny everything works fine.
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: eog
Version: 2.22.3-1
Severity: serious
--- Please enter the report below this line. ---
I had un .odg file and I converted it to .svg with openoffice.org
Than I tryed to open the new file with eog and system become strangely slow
Than I opened gnome-system-monitor and I saw that eog was
So this bug has been reassigned to nautilus...
Here are my nautilus version and other informations:
Package: nautilus
Version: 2.20.0-3
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Lin
The problem is still present after different reboots.
You won't be able to eject ipod correctly.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Subject: base: problems with case-sensitive name of folders
Package: base
Severity: grave
Justification: causes non-serious data loss
*** Please type your report below this line ***
Way to reprobuce the bug:
- connect an ipod (I dont know if the problem is still present with
other devices)
- creat
Attached there is the bizzped erl_crash.dump file.
erl_crash.dump.bz2
Description: Binary data
In the attachment there is the bzipped strace output for /usr/bin/couchdb.
strace.out.bz2
Description: Binary data
Package: couchdb
Version: 0.7.2-2
Severity: grave
--- Please enter the report below this line. ---
Couchdb doesn't start anymore after erlang update.
The error message is:
{"init terminating in do_boot",{'cannot load',error_handler,get_file}}
Crash dump was written to: erl_crash.dump
init termin
This bug is upstream bug #134 [1]. I've attached the patch that fixed it and
also tested it working.
[1] http://bugzilla.rawstudio.org/show_bug.cgi?id=134
Index: src/rawstudio.c
===
--- src/rawstudio.c (revisione 1440)
+++ src/rawstu
llscript).
federico
--
Federico Di Gregorio http://people.initd.org/fog
Debian GNU/Linux Developer[EMAIL PROTECTED]
INIT.D Developer [EMAIL PROTECTED]
I'm hung like Einstein and sma
*|*"executable shell script"*|*"/bash
script"*|*"Bourne shell script"*|*"Bourne-Again shell script"*)
And fai will continue to work when file migrates or when the user
install it from unstable.
federico
--
Federico Di Gregorio http:/
Il giorno gio, 29/03/2007 alle 13.39 +0200, Thomas Lange ha scritto:
> >>>>> On Thu, 29 Mar 2007 11:45:13 +0200, Federico Di Gregorio <[EMAIL
> >>>>> PROTECTED]> said:
>
> > Package: fai-client
> > Version: 3.1.8
> >
. Most of the default fai scripts
are of this type and are then not run; breaking the whole ai system.
The fix is a one-line patch so obvious that I am not attaching it to
this email; but if you better like the other way I can provide it. :)
federico
-- System Information:
Debian Release: 4.0
handling chunked responses."
> > http://issues.apache.org/bugzilla/show_bug.cgi?id=40920
>
> Could that be related to your situation?
It could be. Anyway, reducing the number of clients to 25 solved out
problem. (Unfortunately you couldn't always do that.) I'll do so
Il giorno gio, 23/11/2006 alle 15.42 +0100, Stefan Fritsch ha scritto:
> http://svn.apache.org/repos/asf/httpd/httpd/branches/2.2.x/STATUS
>
> also notes memory leaks in mod_deflate and mod_mem_cache. Do you use one
> of these?
Definitely no.
--
Federico
about 1 year with the exact same configuration without
any problem. The problems started the day after the upgrade to 2.2.
What was strange was the high number of defunct apache2 processes. I'd
expect to find something about them in apache error.log but no, nothing
was there
Package: initramfs-tools
Version: 0.83
Severity: grave
Justification: renders package unusable
In the config file initramfs-tools.preinst , there is a missing escape
of the endofline/newline on line 32.
A patch is attached to correct this.
donfede
-- System Information:
Debian Release: testin
1 - 100 of 105 matches
Mail list logo
