reassign 409875 libdevmapper1.02
retitle 409875 libdevmapper should provide more helpful error messages
severity 409875 minor
thanks
On Fri, Feb 09, 2007 at 09:44:32PM +0100, Johannes Schlumberger wrote:
Thanks, this looks mighty suspicious...it looks like /dev/md0 is mounted
as your root partit
Hi,
> Thanks, this looks mighty suspicious...it looks like /dev/md0 is mounted
> as your root partition by the initramfs? Please provide me with "ls -al
> /dev/root" and "cat /proc/cmdline" as well as the contents of your grub
> or lilo config file.
I am so sorry for stealing yours and other pe
On Fri, Feb 09, 2007 at 07:35:46PM +0100, Johannes Schlumberger wrote:
Hi,
Meanwhile, could you add the following to the above mentioned debugging
output:
printk("dumping stack for %s:\n", current->comm);
dump_stack();
(right after the above printk in bd_claim())
And then send another dmesg
Hi,
> Meanwhile, could you add the following to the above mentioned debugging
> output:
>
> printk("dumping stack for %s:\n", current->comm);
> dump_stack();
>
> (right after the above printk in bd_claim())
>
> And then send another dmesg this way...this should tell us which
> process/kernel th
On Fri, February 9, 2007 16:58, Johannes Schlumberger said:
>> Could you please try a new compile, this time, skip the previously
>> mentioned patch and instead do the following changes:
>>
>> In fs/block_dev.c, add the following at the end of the function
>> bd_claim()
>> (just before the return):
On Fri, February 9, 2007 14:42, Johannes Schlumberger said:
> Hi,
> I just want to point out, so far after each test I brought the system back
> into the beginning state (kernel, dmsetup-package, etc).
Yes, that's good.
Could you please try a new compile, this time, skip the previously
mentioned
Hi,
> > I just want to point out, so far after each test I brought the system back
> > into the beginning state (kernel, dmsetup-package, etc).
>
> Yes, that's good.
I just wanted to make shure, we are stil talking about the same setup :)
> Could you please try a new compile, this time, skip th
Hi,
I just want to point out, so far after each test I brought the system back
into the beginning state (kernel, dmsetup-package, etc).
regards,
Johannes
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
> Could you build a new kernel which includes the patch attached to bug
> report #304507 and try again?
>
> http://bugs.debian.org/cgi-bin/bugreport.cgi/2.6-bd-claim.patch?bug=304507;msg=5;att=1
It sems the same to me. This is kernel -asso-50 (I attached the config to the
inital bugreport ma
On Thu, February 8, 2007 22:51, Johannes Schlumberger said:
> I built the packages and installed them.
> The attached file contains the generated stderr stream (which looks a bit
> strange to me). Just to make shure, here is also the output generated from
> the command without the redirection.
Cou
On Thu, Feb 08, 2007 at 07:52:53PM +0100, Johannes Schlumberger wrote:
Hi,
> [22:28:[EMAIL PROTECTED]:/tmp]# echo '0 1 crypt aes-cbc-essiv:sha256 \
> 0123456789abcdef0123456789abcdef 0 /dev/md0 0' > map
> [22:28:[EMAIL PROTECTED]:/tmp]# dmsetup create root map
> device-mapper: reload ioctl f
Hi,
> > [22:28:[EMAIL PROTECTED]:/tmp]# echo '0 1 crypt aes-cbc-essiv:sha256 \
> > 0123456789abcdef0123456789abcdef 0 /dev/md0 0' > map
> > [22:28:[EMAIL PROTECTED]:/tmp]# dmsetup create root map
> > device-mapper: reload ioctl failed: Invalid argument
> > Command failed
>
> Could you try this
On Wed, February 7, 2007 22:31, Johannes Schlumberger said:
> Hi,
>> Ok, could you create a file called e.g. "map" containing the following
>> line:
>> 0 1 crypt aes-cbc-essiv:sha256 0123456789abcdef0123456789abcdef 0
>> /dev/md0 0
>
> shure.
> [22:28:[EMAIL PROTECTED]:/tmp]# echo '0 1 cryp
Hi,
> Ok, one more test...could you deallocate both swap mappings and then try
> to setup your root mapping?
[01:49:[EMAIL PROTECTED]:/home/spjsschl]# swapoff -a && cryptsetup remove swap1
&&
cryptsetup remove swap2 && cryptsetup -c aes -s 256 -d /dev/stdin create root
/dev/md0
Ok, one more test...could you deallocate both swap mappings and then try
to setup your root mapping?
That is, run something like
"swapoff -a && cryptsetup remove swap1 && cryptsetup remove swap2"
and then try the "cryptsetup create..." invocation
--
David Härdeman
On Thu, Feb 08, 2007 at 01:49:35AM +0100, David Härdeman wrote:
Ok, one more test...could you deallocate both swap mappings and then try
to setup your root mapping?
That is, run something like
"swapoff -a && cryptsetup remove swap1 && cryptsetup remove swap2"
and then try the "cryptsetup creat
Hi,
> And while we're at it, "cat /proc/partitions" to make sure that the
> kernel and fdisk agree on partition sizes.
[01:53:[EMAIL PROTECTED]:/home/spjsschl]# cat /proc/partitions
major minor #blocks name
22 0 160086528 hdc
22 1 19543041 hdc1
22 29775552 hdc2
22
On Wed, Feb 07, 2007 at 11:26:16PM +0100, Johannes Schlumberger wrote:
Hi,
This would suggest that the problem is not with cryptsetup at least.
Something seems wonky with device-mapper in general.
Whom should I be talking to about this?
That would be the dmsetup package maintainer, but lets
On Wed, Feb 07, 2007 at 11:26:16PM +0100, Johannes Schlumberger wrote:
[23:24:[EMAIL PROTECTED]:/home/spjsschl]# cat /proc/mounts
rootfs / rootfs rw 0 0
/dev/root / ext3 rw,data=ordered 0 0
Also...which device is / on? I.e. /dev/root is an alias of
/dev/hd?
--
David Härdeman
Hi,
> >[23:24:[EMAIL PROTECTED]:/home/spjsschl]# dmsetup table
> >swap2: 0 995967 crypt aes-cbc-plain
> >8fd07cf5cecac858cdd2c0ce673449b4c1734cecbe8a24e5be629d542c975cf1 0 22:5 0
> >swap1: 0 6458067 crypt aes-cbc-plain
> >dde5fec1ee7146100bc83af997171ce196c2d1c453134d21e574f85ccc296588 0 22:65 0
Hi,
> Also...which device is / on? I.e. /dev/root is an alias of
> /dev/hd?
It is hdd6 at the moment, i am going to copy it back to md0 once i got the
cryptlayer on it working.
regards,
Johannes
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contac
Hi,
> This would suggest that the problem is not with cryptsetup at least.
> Something seems wonky with device-mapper in general.
Whom should I be talking to about this?
> Just to make sure, do you think you could install the Debian packaged
> kernel, boot it and try to setup the mapping with
On Wed, Feb 07, 2007 at 10:31:27PM +0100, Johannes Schlumberger wrote:
Hi,
Ok, could you create a file called e.g. "map" containing the following line:
0 1 crypt aes-cbc-essiv:sha256 0123456789abcdef0123456789abcdef 0
/dev/md0 0
shure.
[22:28:[EMAIL PROTECTED]:/tmp]# echo '0 1 crypt a
Hi,
> Ok, could you create a file called e.g. "map" containing the following line:
> 0 1 crypt aes-cbc-essiv:sha256 0123456789abcdef0123456789abcdef 0
> /dev/md0 0
shure.
[22:28:[EMAIL PROTECTED]:/tmp]# echo '0 1 crypt aes-cbc-essiv:sha256 \
0123456789abcdef0123456789abcdef 0 /dev/md0 0'
On Wed, Feb 07, 2007 at 12:51:52AM +0100, Johannes Schlumberger wrote:
Hi,
Unfortunately I am not able to reproduce this. Using a qemu machine with
two virtual disks in a RAID set, the crypt mapping is setup correctly.
If I do make sure that the dm-crypt.ko module is not available, the
error
On Tue, Feb 06, 2007 at 11:02:21PM +0100, Johannes Schlumberger wrote:
Hi,
and thanks for the trace, the problem is indeed here:
>ioctl(3, DM_TABLE_LOAD, 0x80a2040) = -1 EINVAL (Invalid argument)
that means that "crypt" is not a valid device-mapper target.
That in turn means that dm-cryp
Hi,
> Unfortunately I am not able to reproduce this. Using a qemu machine with
> two virtual disks in a RAID set, the crypt mapping is setup correctly.
>
> If I do make sure that the dm-crypt.ko module is not available, the
> error messages and strace exactly match yours.
>
> What output do y
27 matches
Mail list logo
