Package: ddclient
Version: 3.8.3-1.1
Severity: normal
Dear Maintainer,
I was using ddclient to manage my dynamic DNS for years.
I'm using a PPP connection which is supposed to remain connected all the time,
but still, disconnections can happen, and when it does, my IP address usually
need to b
Hello Petter,
Yes, I no longer have the hardware to test it anyways.
Regards,
Xavier
Sorry yes I am running 2.6.32-41.
Xavier
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: darkstat
Version: 3.0.708-2
Severity: normal
I installed darkstat and didn't understand why it didn't start with
invoke-rc.d. I figured out that it was because the -l argument takes
an IP+netmask combination in this form : 192.168.0.0/255.255.255.0
insted of 192.168.0.0/24 as in the examp
I know it will not seems like a nice answer but would it be hard to try
with an other OS? Do you have a dual boot setup?
Is there any led on on your motherboard or network card when you are
hibernating? When it's off?
Xavier Douville
--
To UNSUBSCRIBE, email to debian-bugs-dist
Hi
I have the same problem with libavformat.so.52.34.0 from
debian-multimedia. My ugly workarround is this :
#!/bin/sh
trap "exit 0" SIGINT SIGTERM
while :; do
motion
done
I can see about 1-3 crashes / period of 12 hours
Xavier
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.de
channels that my card can't tune. Is it normal? Maybe a
bad firmware? I use firmware 15.28.2.8 (debian package version 0.16).
Xavier Douville
--- System information. ---
Architecture: amd64
Kernel: Linux 2.6.29-ex5620
Debian Release: squeeze/sid
990 testing gulus.usherbroo
Hi
Do you have a wireless on/off button on your laptop?
Are you sure it's a firmware issue? I also have an iwl3945 card (and
firmware 0.16) and it works well, but I don't remember that it didn't
work with 0.14.
Xavier Douville
--
To UNSUBSCRIBE, email to debian
s more a wishlist, but I tagged the bug normal since it
also fails to start in some situations.
thanks
Xavier Douville
--- System information. ---
Architecture: amd64
Kernel: Linux 2.6.29-ex5620
Debian Release: squeeze/sid
990 testing gulus.usherbrooke.ca
990
y else because it's hardware related you can close it. Let me know
if you need more information.
Xavier Douville
Tzafrir Cohen a écrit :
On Sun, Mar 29, 2009 at 03:22:59PM -0400, Xavier Douville wrote:
Hi
When the driver is bugged, syslogd and klogd take 100% of the CPU, even
if I sto
he
HDD. I know there are a lot of issues with IRQ with zaptel, but both
eth1 and sata_sil have a higher IRQ number than wcfxo so they should
have less priority right?
thanks
Xavier
Tzafrir Cohen a écrit :
Hi
On Sun, Mar 29, 2009 at 01:18:41PM -0400, Xavier Douville wrote:
Package: zap
Package: zaptel-source
Version: 1:1.4.11~dfsg-3
Severity: important
I have a X100P clone card using the wcfxo module. It doesn't share an
IRQ with any other driver. When I transfer files on the gigabit
connection (so that CPU, disk and network usage all becomes high), wcfxo
generate *tons* of thes
.
If you report a problem, please include the complete output above.
---------
After this s2ram -f -a3 works.
thanks
Xavier Douville
--- System information. ---
Architecture: amd64
Kernel: Linux 2.6.28.1-ex5620
Debian Release: 5.0
990 testing
: H263, H264, MPEG2 video, MPEG4 and MS-MPEG4."
Next there is a section abouts patents, but only talks about MP3, AAC
and ASF. Is there a difference between those patents and those of the
mpeg encoders? If not it could be in the same section.
I hope this will help,
Xavier Douville
Fabian Greffrath a écrit :
> Xavier Douville schrieb:
>> I think that would help answer many "can't play video" questions.
>
> In Debian's ffmpeg version no codecs were stripped that would be
> required for playback of video, only *encoders* have be
ggested for
debian-multimedia?
I think that would help answer many "can't play video" questions.
thanks
Xavier Douville
--- System information. ---
Architecture: amd64
Kernel: Linux 2.6.28.1-ex5620
Debian Release: 5.0
990 testing gulus.usherbrooke.ca
500 unstable
Package: wnpp
Severity: wishlist
http://sourceforge.net/projects/pacc/
LGPL portable c++ library
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Hi
The java plugin for Linux AMD64 is now available in the version 6-12
https://jdk6.dev.java.net/6uNea.html
Xavier Douville
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
1pre1 to
experimental.
thanks
Xavier Douville
--- System information. ---
Architecture: amd64
Kernel: Linux 2.6.26-1-amd64
Debian Release: lenny/sid
990 testing security.debian.org
990 testing gulus.usherbrooke.ca
500 unstablegulus.usherbrooke.ca
500
Package: opencv
Severity: wishlist
--- Please enter the report below this line. ---
Hi
Please compile openCV with libdc1394 support, so that we can capture
images from IEEE 1394 cameras which are not V4L devices.
thanks
Xavier Douville
--- System information. ---
Architecture: amd64
Kernel
32
Camera saturation level is 30
ioctl querycontrol error 22
Camera gain level is -1
Saving image to: snap.jpg
[EMAIL PROTECTED] ~> lsusb|grep WebCam
Bus 003 Device 002: ID 064e:a101 Suyin Corp. Laptop integrated WebCam
Xavier Douville
--- System information. ---
Architecture: amd64
Kern
7;s a bug. It's instant
when not doing the command as root.
I don't have root access on FC9 machines here so I can't compare it.
iostat returns a valid speed (arround 20 MiB/s)
Xavier Douville
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe&
Package: wpasupplicant
Version: 0.6.4-3
Severity: normal
--- Please enter the report below this line. ---
>From the result of these two commands, I can see that wpasupplicant
sometimes think it's associated but in reality it's not. I have to
manually disconnect and reconnect for my connection to
Package: phpbb3
Version: 3.0.2-3
Severity: wishlist
Hi
It would be nice to have language packs other than English as it was
the case with phpbb2.
thanks
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Ar
;0"
Option "RBCornerButton""0"
EndSection
So I have SHMconfig OFF (nothing can interfere). When I start X with
invoke-rc.d kdm start, all my settings work (I especially hate right and
middle button mapped to right top and right bottom).
But I trie
Package: icedove
Version: 2.0.0.16-1
Severity: minor
For some reason, I sometimes get a folder which is in bold (unread)
but I don't find any unread message inside. I need to manually "mark
folder as read"
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990,
Package: wondershaper
Version: 1.1a-4.1
Severity: minor
The file README.Debian.gz contains instructions on how to add
wondershaper to /etc/network/interface to make it permanent.
However, there is a typo. Wondershaper is /usr/sbin/wondershaper and
not /sbin/wondershaper.
-- System Information:
De
What about the channel 14 used in Japan and some other places?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: linux-igd
Version: 1.0+cvs20070630-2
Severity: normal
It's the second time that my upnpd crashes with the following message
in dmesg:
upnpd[10145]: segfault at 7 ip b7e8a0a9 sp b4df81d0 error 4 in
libc-2.7.so[b7e1a000+155000]
My setup is a small home LAN. The most popular UPNP app is pro
Package: kwlan
Version: 0.6.3-1
Severity: important
I use wpasupplicant in its roaming mode (wpa-roam in
/etc/network/interface). If I start kwlan, my wifi connection stay
alive but I get arround 40% packet lost (using ping). The Kwlan GUI is also very
slow (about 1-2 second after click to show th
Package: qc-usb-source
Followup-For: Bug #486659
Hi
I finally think that my previous computer was broken. I transfered the
hard drives on an other system and I can't reproduce the bug. Since
nobody else confirmed my bug, I think we should tag it unreproductible
and close it. Thanks for your help.
Package: aircrack-ng
Version: 1:1.0~rc1-1
Severity: normal
To use airmon-ng with a mac80211 driver (such as iwlwifi or rt2x00), the
tool named "iw" must be installed. However, it is not in Debian (or I can't
find it because of the simple two letters name!).
iw can be downloaded at http://dl.air
James Vega a écrit :
On Fri, Jun 20, 2008 at 11:45:29AM -0400, Xavier Douville wrote:
The command "mimedb -fd .txt" works fine (and for most other extensions
I guess) but it doesn't works for .doc. It takes 100% CPU forever.
This works fine for me. Could you insta
Package: fish
Version: 1.23.0-5
Severity: important
The command "mimedb -fd .txt" works fine (and for most other extensions
I guess) but it doesn't works for .doc. It takes 100% CPU forever. It
freezes fish in some cases such as "ls ~/" if there is a .doc file
in ~. In this case the solution i
Martín Ferrari a écrit :
HI,
On Tue, Jun 17, 2008 at 10:44, Xavier Douville <[EMAIL PROTECTED]> wrote:
Package: qc-usb-source
Version: 0.6.6-5
Severity: critical
Justification: breaks the whole system
When I try to capture using a program such as webcam-server, I don't
get any
Package: qc-usb-source
Version: 0.6.6-5
Severity: critical
Justification: breaks the whole system
When I try to capture using a program such as webcam-server, I don't
get any image. Even worst, when I kill webcam-server, I get a kernel
oops and need to reboot my system.
[ cut here ]--
Package: iceweasel
Version: 3.0~rc2-1
Severity: normal
In iceweasel 2, I can use my laptop's mouse buttons 6 and 7 for back
and forward, but it no longer works when I upgrade to iceweasel 3.
I guess it's the same for all mouses with many buttons.
-- System Information:
Debian Release: lenny/sid
I am still interested by this software (and use it). I would be nice
that someone include it to debian.
thanks
Xavier Douville
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi
I also sometimes get this bug, but only when I press Fn+F4 (to suspend
to ram on my laptop). I still don't know why it sometimes happens and
sometimes not.
Xavier Douville
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: suspend2-userui
Severity: minor
The package description (and maybe even the package name) should include the
new name of the projet,
which is Tux on ice. http://www.tuxonice.net/
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (990, 'stable'), (500, 'testin
Adding the flag IEEE80211_HW_WEP_INCLUDE_IV also helps for rt2500pci
since without it, I get a lot of error messages (but it still works)
when using WPA.
http://rt2x00.serialmonkey.com/phpBB2/viewtopic.php?p=26569#26569
Xavier Douville
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
Hi
I am writing this using WPA2-PSK-TKIP with rt2500pci (maybe only rt61pci
doesn't work).
However, I get a lot of errors like this one :
wlan0: TKIP decrypt failed for RX frame from XX:XX:XX:XX:XX:XX (res=-2)
Xavier Douville
Richard Antony Burton a écrit :
Package: rt2x00-source
Ve
Adding www-data to the asterisk group seems a good way to fix this.
This should probably be done by debconf.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: mozplugger
Version: 1.7.3-6
Severity: important
When opening a document in OpenOffice (a .rtf in my case), mozplugger
opens a new window for OOo and lets the current browser tab empty.
The document is saved in /tmp/plugtmp, but clicking the "back" button
of the browser deletes this docume
Package: wnpp
Severity: wishlist
* Package name: OpenSTV
Version : 1.0
Upstream Author : Jeff O'Neill <[EMAIL PROTECTED]>
* URL : http://stv.sourceforge.net/
* License : GPL
Programming Lang: Python
Description : Single Transferable Vote Software
The p
Package: brickos
Version: 0.9.0.dfsg-2
Severity: grave
Justification: renders package unusable
When using brickos 0.9.0.dfsg-2 the following command:
firmdl3 /usr/lib/brickos/brickOS.srec
always fails. The firmware is sent to the RCX, but when the transfer
is completed, it makes a continuous stran
Package: rt2x00-source
Severity: important
I am not able to associate with current version (0cvs20060928-1)
However, it works with the latest upstream CVS
my setup is the following
rt2500pci WPA2-PSK-CCMP
I get the following error in dmesg:
wlan0: mismatch in privacy configuration and mixed-cell
Package: kexec-tools
Version: 1.101-kdump10-2
Followup-For: Bug #378880
Hi
I checked the init scripts for kexec and they work fine, but I see a big
problem : we must choose between normal reboot and kexec reboot (by
editing /etc/default/kexec). I think we could add a /sbin/kexec_reboot
shell s
Package: ndiswrapper-source
Severity: minor
Look at this strange path
/lib/modules/2.6.18-z71a/misc/lib/modules/2.6.18-z71a/misc
[EMAIL PROTECTED]:~$ dpkg --listfiles ndiswrapper-modules-2.6.18-z71a
/.
/lib
/lib/modules
/lib/modules/2.6.18-z71a
/lib/modules/2.6.18-z71a/misc
/lib/modules/2.6.18-
Package: openoffice.org-impress
Version: 2.0.4~rc3-1
Severity: normal
When I launch ooimpress, I get a wizard. When I select the second option (from
model), click next twice, and select "random transition" effect, the
program crashes. At least, it saves all opened files.
-- System Information:
Package: openssh-client
Version: 1:4.3p2-3
Severity: normal
When the remote login shell isn't bash, the command at line 41 of ssh-copy-id
"umask 077; test -d .ssh || mkdir .ssh ; cat >> .ssh/authorized_keys"
may fail. This is the case with fish because it doesn't support "||". We should
specify
Since around 1.2.10, I am not able to reproduce this bug. Maybe it can
be closed.
Xavier Douville
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: rt2x00-source
Severity: normal
This package shoud depend on linux >= 2.6.17 as it's the minimal requierment.
Also it should not move to testing before linux 2.6.17
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstabl
Hi
First thanks for packaging.
When I was installing quake3-data, I chose to install the shareware and
selected ftp.idsoftware.com as the mirror. However, if there are too
many users connected (like now), the installation fails, without asking
if I want to download from an other mirror.
Xa
Package: asterisk-prompt-fr
Version: 0.0.20040928-1
Severity: minor
This package should not depend on asterisk, as both
asterisk-sounds-main and asterisk-sounds-extra don't.
Even asterisk-config only recommends asterisk.
-- System Information:
Debian Release: testing/unstable
APT prefers test
Package: zaptel-source
Version: 1:1.2.7.dfsg-2
Followup-For: Bug #381972
[EMAIL PROTECTED]:~$ grep RTC /boot/config-`uname -r`
# CONFIG_APM_RTC_IS_GMT is not set
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAUL
Package: zaptel-source
Version: 1:1.2.7.dfsg-2
Severity: important
The following command should build and install zaptel modules but it fails. For
those of you who don't speak French, the error message returned by dpkg at the
end means that the file /lib/modules/2.6.17-k62/modules.pcimap can't b
Package: asterisk
Version: 1:1.2.7.1.dfsg-3
Severity: important
If asterisk is configured to use a zap channel, and the zaptel module is
not loaded (with udev it also means that /dev/zap doesn't exist) my whole
system crashes about 3 seconds later. I can still ping it but I can't
ssh to it, and
Package: fish
Version: 1.21.9-2
Severity: minor
When I type "sudo nano /" completion should list all files and directory
in /
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i
Package: wnpp
Severity: wishlist
* Package name: acpi4asus
Version : CVS
Upstream Author : Julien Lerouge <[EMAIL PROTECTED]>
* URL : http://acpi4asus.sourceforget.net
* License : GPL
Programming Lang: C
Description : Asus laptop extras
This project is
Package: linux-image-2.6.16-1-686
Severity: minor
With 2.6.15 and under, /proc/cpuinfo reports true cpu frequency when
using cpufreq (at least on non-SMP x86)
But since 2.6.16, we only get the target frequency of the current
governor (ie. I get 1600 MHz instead of 1598.89 or something
else wh
The new driver use the Devicescape wireless network stack. We would need
to package this first.
I tested the driver and it works, but I only get 60 KiB/s when using
WPA2/TKIP (tested with samba)
Xavier Douville
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubs
Package: rt2500-source
Severity: wishlist
It seems that the new CVS supports SMP (previous versions didn't for
some reasons)
See this thread for more info :
http://rt2x00.serialmonkey.com/phpBB2/viewtopic.php?t=1182&postdays=0&postorder=asc&start=0
Download the new CVS at :
http://rt2x00.serial
Package: mozilla-firefox-locale-fr-fr
Version: 1.5.0.1lang20060301-1
Severity: grave
Justification: renders package unusable
When I upgraded from firefox 1.07 to 1.5, I got this error message :
Firefox could not install this item because of a failure in Chrome
Registration. Please contact the au
Package: asterisk-prompt-fr
Version: 0.0.20040928-1
Severity: important
Please package more updated sounds such as those ones :
http://public.indigen.com/asterisk-1.2-sounds-fr-armelle.tar.gz
Current sounds are buggy and almost useless. It's even worst with asterisk 1.2.
At least
it fallbacks
Package: rt2500-source
Severity: wishlist
Please update to latest CVS from upstream to allow raw packet injection
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i586)
Shell: /bin/sh linked to /bi
Package: wnpp
Severity: wishlist
* Package name: libdlusb
Version : x.y.z
Upstream Author : Huidae Cho
* URL : http://geni.ath.cx/libdlusb.html
* License : BSD
Description : Lib and tools using lib to use a Timex DataLink USB watch
under Linux and *BSD.
Package: zaptel-source
Version: 1:1.0.9.1-3
Severity: minor
I installed zaptel-source and did the following commands :
m-a a-i zaptel
modprobe wcfxo
I received an error message saying wcfxo was not found.
I did :
depmod -a
modprobe wcfxo
and it worked.
-- System Information:
Debian Release: t
Package: module-assistant
Version: 0.7.2
Followup-For: Bug #290837
Hi, I'm the original reporter and tried to reproduce as soon as I got another
Sarge install available for testing.
I first got a problem building nvidia on my own PC, then tested on my sister's.
This report is about the problem o
69 matches
Mail list logo
