Hi,
I think I just ran into this bug, but the space needed is much more
exaggerated:
Warning: More space needed in /boot than available: 606 MB > 406 MB,
installation may fail
I have no idea how this is possible at all. Initrd is around 70 MB and kernel
images around 10 MB. Where do the 606
Package: kwin-wayland
Version: 4:6.2.3-1
Severity: important
X-Debbugs-Cc: m...@familie-heinz.name
Hi,
I had the pleasure to test plasma on wayland after an upgrade. It worked fine,
but some settings weren't merged, which is a minor thing and easy to fix.
But one mayor thing got me to switch bac
Source: hd-idle
Version: 1.05+ds-2
Severity: wishlist
X-Debbugs-Cc: m...@familie-heinz.name
Hi!
Please consider updating hd-idle to the reimplementation from Andoni del Olmo
Elizari: https://github.com/adelolmo/hd-idle
Best regards
Matthias
-- System Information:
Debian Release: bookworm/sid
reopen 1019944
Hi Dylan,
sadly the last patch didn't work for me, as you already know.
I'm certain now that this is a race-condition between wireplumber and
pipewire-pulse. Even though wireplumber should be started before pipewire-
pulse the Type= to start the service is just "simple", which m
Hi,
with the help of NiklvsKoesikovs from the pipewire irc channel we came to the
conclusion that the order in which pipewire-pulse and wireplumber are started
matter.
pipewire-pulse has to be startet AFTER wireplumber.
Please add this to the systemd service file.
Thanks
Matthias
Package: wireplumber
Version: 0.4.11-3
Severity: important
X-Debbugs-Cc: m...@familie-heinz.name
Hi,
after upgrade wireplumber from 0.4.11-3 to 0.4.11-5 it fails to somehow realize
what the target of the last stream was, if it was not the default device.
pavucontrol just reports it as "Unknown o
Hi,
I have a very similar bug where kwin-x11 crashes, I get logged out, but have
to manually kill kwin. But that bug appeared just recently (I'm using kwin-x11
5.24.4-1 from unstable).
Usually after logging in I use a hotkey to go through all windows that want
attention (after logging in it is
Hi,
the last report was a bit short. Bugreport somehow swallowed my text.
Since I updated from 5.10 to 5.14 I'm getting a SMART error on every boot.
The nvme device is a Samsung SSD 970 EVO Plus 250GB.
The SMART error log looks like:
Error Information (NVMe Log 0x01, 16 of 64 entries)
Num Err
Package: src:linux
Version: 5.14.6-2
Severity: normal
X-Debbugs-Cc: m...@familie-heinz.name
-- Package-specific info:
** Version:
Linux version 5.14.0-1-amd64 (debian-ker...@lists.debian.org) (gcc-10 (Debian
10.3.0-10) 10.3.0, GNU ld (GNU Binutils for Debian) 2.37) #1 SMP Debian
5.14.6-2 (2021
Package: mumble
Version: 1.3.0+dfsg-1+b3
Severity: wishlist
Hi!
There is a new version of mumble available upstream. It would be great if this
could be packaged, because it would solve the slow startup of mumble (waiting
for jack).
Thanks you!
- Matthias
-- System Information:
Debian Release
Package: psi-plus-plugins
Version: 1.4.1451-1
Severity: normal
Hi,
since profanity updated their omemo implementation to use an IV of 12 byte I'm
unable to receive messages from profanity users.
Since sending omemo messages from profanity to other xmpp clients works this
seems to be a bug in the
Package: pulseaudio
Version: 13.0-3
Severity: normal
Hi,
I just updated pulseaudio to 13.0-3 and since then the volume in firefox
behaves weird.
Now firefox doesn't have fixed volume anymore, every audio source I start is
set to 100 %. I can somewhat control the pulseaudio volume by the firefox
Package: mumble
Version: 1.3.0+dfsg-1
Severity: normal
Hi,
since the last update mumble starts very slow.
On the console it shows:
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
exec of JACK server (command = "/usr/bin/jackd") failed: No
Hi,
I had the same problem and it took me quite some time to rebuild the initramfs
with the older udev version. But I managed to do this from within the
initramfs console.
What made me wonder, when I did this, is the fact that the root device, which
was set as UUID in grub, was not listed in /
Dear Christian,
thank you for the patch. Applies and compiles and works fine. Could be a short
term solution. But it looks like work on 3.0 has started :)
Many thanks
Matthias
Am Montag, 22. Oktober 2018, 16:32:23 CEST schrieb Christian Brauner:
> So, let me make your life easier by appending a
schrieb Pierre-Elliott Bécue:
> Cc-ing Christian as he proposed the patch.
>
> Le jeudi 18 octobre 2018 à 14:32:12+0200, Matthias Heinz a écrit :
> > Hi,
> >
> > I've tried applying the patch to the 2.0.9 source. Unfortunately there
> > have
> > bee
Hi,
I've tried applying the patch to the 2.0.9 source. Unfortunately there have
been more changes to conf.c since the release of lxc 2.0.9 and this patch wont
apply without applying these changes as well.
Best regards
Matthias
Package: kmix
Version: 4:17.12.2-1
Severity: important
Hi,
the latest update of kmix in unstable didn't correctly install the desktop
files for autostarting and restoring volumes.
It seems that when the old kmix package is removed the links from /etc/xdg/
autostart/restore_kmix_volumes.desktop
Package: freecad
Version: 0.16.6712+dfsg1-1+b2
Severity: normal
Hi,
I fear some update has broken FreeCAD on my system. It fails to start for me
with:
failed to create drawable
[xcb] Unknown sequence number while processing queue
[xcb] Most likely this is a multi-threaded client and XInitThrea
reopen 886464
--
Dear Pierre-Elliott,
I'm using Debian Unstable and libgaminggear0 0.15.1-5, but I'm still getting
this error message.
The file /lib/modprobe.d/uinput.conf is still in the package.
Best regards
Matthias
Dear Sandro,
I'm running Unstable and kgpg is running fine for month (years?) now.
Since this bug is over 5 years old and for a very old version of kgpg I
propose to close it.
Best regards
Matthias
Am Sonntag, 21. Januar 2018, 21:01:16 CET schrieb Sandro Knauß:
> Control: Forwarded -1 https:/
Package: pulseaudio-dlna
Version: 0.5.3+git20170406-1
Severity: normal
Tags: patch
--- Please enter the report below this line. ---
Hi,
a few days ago pulseaudio-dlna stopped working for me, because it couldn't
discover the pulseaudio socket anymore.
After some investigation I found out that i
Package: debian-installer
Version: 20170615+deb9u1
Severity: wishlist
--- Please enter the report below this line. ---
Hi,
since SSDs are becoming more and more common it would be great to see support
for TRIM command enabled in the debian-installer. It took me quite some time
to figure out ho
On Freitag, 24. März 2017 10:08:14 CEST Maximiliano Curia wrote:
> Control: reopen -1
> Control: tag -1 + confirmed
> Control: notforwarded -1
>
> ¡Hola Matthias!
>
> El 2017-03-23 a las 18:39 +0100, Matthias Heinz escribió:
> > the commit may be included in kglobalac
Hello,
thank you all for clearifing this.
I will create my own vlc package then to test Mesa 17.
Best
Matthias
On Montag, 20. Februar 2017 23:13:37 CET Mateusz Lukasik wrote:
> Hi,
>
> Check my next changes.
Dear Mateusz,
I'm a bit confused here, maybe you can clearify this for me.
Your patch is against 2.2.4-14, so I guess that this change should've gone
into 2.2.4-14. But when I view the Debian changelog of my installed vlc
package, I only see the "Updated to ffmpeg 2.8.11" line, not your change.
Hi,
I've got the same problem. I hope it's ok, that I post the version
information, too.
-- System Information:
Debian Release: stretch/sid
APT prefers proposed-updates
APT policy: (500, 'proposed-updates'), (500, 'unstable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Foreign Archite
Hello Scott,
actually there is a test run:
Running tests...
/usr/bin/ctest --force-new-ctest-process -j2
Test project /«PKGBUILDDIR»/obj-i586-linux-gnu
Start 1: kglobalshortcuttest
1/1 Test #1: kglobalshortcuttest .. Passed2.03 sec
100% tests passed, 0 tests failed out of 1
Package: kglobalaccel
Version: 5.13.0
Severity: normal
--- Please enter the report below this line. ---
Hi,
I'm trying to test the patch for https://bugs.kde.org/show_bug.cgi?id=341959
and installed the latest source for kglobalaccel. Build doing a plain,
unmodified build a build test keeps fa
There's already a bug report in the KDE tracker:
https://bugs.kde.org/show_bug.cgi?id=341959
A fix is also posted there and shall be shipped with KDE 5.4.
https://git.reviewboard.kde.org/r/123376/diff/1#index_header
Until then it'd be nice to have this fix in KDE itself, but I can compile it
in
Package: kwin
Severity: normal
--- Please enter the report below this line. ---
Hi,
I recently update to the newest KDE version and plasma-desktop and since it
didn't convert my old shortcuts file I had to create new ones.
While doing this I realized that it's impossible to use Meta+Shift+Tab
Hi,
I've reopend this bug, because I recently updated my VMs to Jessie and
stumbled upon it. This bug is a result of different behaviour of systemd
and sysvinit. In sysvinit halt was configurable (see man 5 halt) to do a
poweroff or not. Poweroff was the default here, if a different behavior
Hi.
I can confirm this bug, but only for my Roccat Arvo Keyboard. I have another
USB keyboard from Cherry, which works fine.
Best regards
Matthias
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.
Hello,
since the original patch has some serious flaws, I'm sending in this
patch, which fixes hopefully all of them.
Regards,
--
Matthias Heinz
Uwe Schneider GmbH
Heegwaldring 12
63694 Limeshain
Tel.: +49 / 6047 / 98 65 21
FAX.: +49 / 6047 / 98 73 96
E-Mail: matthias.he...@uweschneid
Package: kgpg
Version: 4:4.8.4-3
--- Please enter the report below this line. ---
Hi!
Yes thanks for the hin. The solution works for me.
But I think kgpg should check for this error in the config file an
replace it automatically. For a normal user (or one with not much time)
it's hard to figu
Package: kgpg
Version: 4:4.8.4-3
Severity: important
--- Please enter the report below this line. ---
Hi,
since I installed kgpg in version 4.8.4 I've got a strange error.
Everytime I start up kgpg it tells that it failed to start.
I can click on Details or Ok. Clicking on OK let's the program
Hallo Michael,
Am 05.01.2012 15:17, schrieb Michael Tokarev:
See also LP#717445:
https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/717445
which is exactly the same issue but reported against grub. And I tend
to think more and more it is a grub bug after all, not qemu/kvm/bios
bug.
I did
Hi,
I'm sorry that my answer took so long.
I ran a few tests today and it's getting a bit weird.
But first the answers to your questions.
Am 23.12.2011 16:27, schrieb Michael Tokarev:
I read that one and thought about it. But I don't know if
it applies. Sometimes the message states that it's
Hi,
Am 23.12.2011 14:54, schrieb Michael Tokarev:
Hmm. Does #586143 , for example, ring any bells?
I read that one and thought about it. But I don't know if
it applies. Sometimes the message states that it's already
the initrd that gets loaded, before it fails.
And it is reproducible, means
Package: qemu-kvm
Version: 0.15.1+dfsg-1
Severity: important
Hi,
I've tried several things to get Squeeze running in a VM
on a wheezy/testing system here.
First I thought it was a problem with the iSCSI target,
then with nested LVM volumegroups, but even with an
installation on the local harddr
Package: mplayer-gui
Version: 2:1.0~rc4.dfsg1-1
Severity: grave
--- Please enter the report below this line. ---
Hi,
the mplayer-gui package misses the gmplayer binary, which renders the
package unusable.
Best regards
Matthias
--- System information. ---
Architecture: amd64
Kernel: Li
Hi,
well, I found out something new.
I'm using gtk-qt-engine and even though hp-systray uses PyQt there seems
to be a connection.
If I deactivate the usage of the gtk style engine hp-systray works fine.
If I activate it, it hangs like I mentioned before.
Regards,
Matthias
--
To UNSUBSCRI
Hi,
If found some time to dig in a bit.
It looks like it has something to do with python-qt4, because the
app.exec_() in /usr/share/hplip/ui4/systemtray.py:725 fails/locks it up.
This is a call for QApplication to start, so it looks like something
goes wrong here.
Regards,
Matthias
PS: Not
Package: hplip-gui
Version: 3.10.5-3.2
Severity: serious
--- Please enter the report below this line. ---
Hi,
since yesterday, iirc, hp-systray fails to start and leaves a python
process behind, which consumes 100% cpu time.
This is all I can get as debug output:
# hp-systray -l debug
HP Lin
Package: libopenthreads13
Version: 2.8.3-1
Severity: normal
Hi,
libopenthreads-dev depends on libopenthread13, which is not installable
due to a conflict with libopenthread12:
Unpacking libopenthreads13 (from .../libopenthreads13_2.8.3-1_amd64.deb)
...
dpkg: error processing
/var/cache/apt/ar
Am Mittwoch, 24. Februar 2010 schrieb Mike Hommey:
> Hi everyone,
>
> Can you all try to downgrade libcairo2 to the version in testing ?
> http://packages.debian.org/source/testing/cairo
It looks like this is the problem. I did some heavy tab using and
testing after the downgrade and had no seg
Hi,
I have the same issue and I think its related to the new xulrunner-1.9.1
package or libmozjs2d (both version 1.9.1.8-3) from the weekend. Because
before the upgrade I had no problems with iceweasel.
Best regards,
Matthias
PS: I had no time yet to downgrade the packages and find out which
Am Dienstag, 12. Januar 2010 schrieben Sie:
> Please do that.
Here we go.
--- Output from package bug script ---
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 22. Okt 2006 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1
Package: xserver-xorg-input-evdev
Version: 1:2.3.2-2
Severity: important
--- Please enter the report below this line. ---
Hi,
since the last upgrade to version 2.3.2 of evdev my up key got stuck
twice in xorg. The only solution for me right now is to restart the
xserver.
When running xev i ge
Package: xserver-xorg
Version: 1:7.4+4
Severity: normal
Tags: patch
--- Please enter the report below this line. ---
Hi,
since the last update of xorg the screensaver doesnt get disabled
anymore if a program calls XResetScreenSaver().
If found this bugreport against xorg which contains a patch
Package: libogre-dev
Version: 1.6.4.dfsg1-1
Severity: normal
Hi,
the script compiledemos.sh uses popd and pushd to compile the example
files, which are only available in ksh and zsh.
I'm using the bash and therefore I get lots of errors:
LANG=C sh /usr/share/doc/libogre-dev/examples/compilede
Hi,
I still get the following error message. To reproduce I used aptitude
reinstall:
Setting up cpufrequtils (006-2) ...
insserv: warning: current stop runlevel(s) (0 1 6) of script
`cpufrequtils' overwrites defaults (empty).
insserv: warning: current stop runlevel(s) (0 1 6) of script
`cpufre
Package: fuse-utils
Version: 2.7.4-1.1
--- Please enter the report below this line. ---
Hi,
because this is very annoying I wrote a small patch that fixes this
issue.
Hopefully someone adds it to the package, soon.
Regards,
Matthias
--- System information. ---
Architecture: amd64
Kernel:
Package: util-linux
Version: 2.16.1-4
Severity: normal
--- Please enter the report below this line. ---
Hi,
a few days ago I discovered that udev doesn't add by-uuid entries in
/dev/disk for my hotpluggable eSATA hard drive. First I thought that
this might be a problem of udev, but then I figu
Package: udev
Version: 0.140-1
--- Please enter the report below this line. ---
Hi,
i had some fun this morning, when no network device worked. My first thought
wasn't udev to blame, but the 2.6.29, because it has some code that can fsck
up the network.
Well, its udev and here are my observat
Package: xserver-xorg-video-intel
Version: 2:2.3.2-2+lenny6
Severity: normal
--- Please enter the report below this line. ---
Hi,
it would be great if somebody could package the latest upstream version.
http://xorg.freedesktop.org/archive/individual/driver/xf86-video-intel-2.6.3.tar.bz2
Best
Am Samstag, 29. November 2008 schrieb Vincent Fourmond:
> I'm curious: does that mean that the /sys/block/dev/removable is 0 ?
Yes.
Most sata controllers do support drive hotplugging. An eSATA port is not very
different to a normal sata port. Its impossible to differ between them. Some
users u
Package: pmount
Version: 0.9.18-2
Severity: wishlist
--- Please enter the report below this line. ---
Hi,
the pmount.allow file is in general a good idea, but it has some issues.
The first thing is that - if you use an esata drive - the kernel does not
recognize that this drive is removable. W
Am Sonntag, 22. Juni 2008 schrieb Ove Kaaven:
> Shouldn't be, it's just waiting for joystick activity until the time is
> up. plib uses gettimeofday() to check the time, and it seems kind of
> like this is not actually working on your system, for some reason.
>
> I don't know, maybe try: echo 0 > /
Am Samstag, 21. Juni 2008 schrieb Ove Kaaven:
> What do you mean 3 axes? No joystick has had that few axes for like a
> decade...
Sorry, my mistake, its 6 axes. Still not 16.
> Did you make sure that you don't have any devices that might show up on
> /dev/input/js1 or something?
Nothing else, ju
Am Samstag, 21. Juni 2008 schrieb Ove Kaaven:
> How many axes your joystick has, maybe, and whether more than one
> joystick is detected. Perhaps it's a plib limitation. At least in plib
> 1.8.4, more than 16 axes per joystick cause crashes. (Can be a real pain
> if certain non-joystick devices, li
Package: clive
Version: 0.4.8-1
Severity: normal
--- Please enter the report below this line. ---
Hi,
could you please update clive to version 0.4.11? It looks like youtube changed
some internal things again, which makes clive useless for those kinds of
files.
Thanks,
Matthias
(in addition w
Package: firebird2.0-common
Version: 2.0.3.12981.ds1-11
Severity: normal
--- Please enter the report below this line. ---
Hi,
when i try to reinstall the firebird2.0-common package to fix the problem with
the missing user "firebird" i get this message:
Setting up firebird2.0-common (2.0.3.12981
Package: courier-imap, courier-imap-ssl
Version: 4.3.1-1
Severity: wishlist
--- Please enter the report below this line. ---
Hi,
i'm writing this, because today I upgraded to the newest version of
courier-imap and courier-imap-ssl.
I saw a dialog telling me that MAILDIR from /etc/courier/imap
Package: flightgear
Version: 1.0.0-1
Severity: normal
--- Please enter the report below this line. ---
Hi,
I've got a Logitech Logitech RumblePad 2 USB here and was trying to configure
it with fgjs. I tried it with the js_demo as suggested in the Readme and it
gets recognized there.
fgjs star
Package: clive
Version: 0.3.3-1
Severity: normal
--- Please enter the report below this line. ---
Hi,
please update the clive package.
Version 0.4.3 got released today fixing some important bugs.
http://dl.gna.org/clive/ChangeLog
http://home.gna.org/clive/dl.shtml
Thanks,
Matthias
--- Syst
Package: stormbaancoureur
Version: 1.5.2-1
Severity: wishlist
--- Please enter the report below this line. ---
Hi,
there's a new version of Stormbaan Coureur available:
http://bram.creative4vision.nl/sturmbahnfahrer/download/stormbaancoureur-2.0.2.tar.gz
would be nice if you could package it.
Package: amarok
Version: 1.4.8-1
Severity: normal
--- Please enter the report below this line. ---
Hello,
amarok acts strange when switching streams.
I do the following:
playing a stream, stopping it, playing another one
the result is a slowly reacting amarok, the stream is not played (even t
Package: k3b
Version: 1.0.3-2
Severity: normal
--- Please enter the report below this line. ---
Hi,
if you wanna add a file bigger than 4gb to a data dvd k3b wont let you and
displays a error dialog instead saying that this is not allowed.
I dont know any good reason why this is not allowed. (
Package: udev
Version: 0.114-2
--- Please enter the report below this line. ---
Hi,
the problem is that "CONFIG_USB_DEVICE_CLASS" is not set in my kernel config.
That means that devices like a digicam just get reported as "usb" not
as "usb_device".
This is a problem of the libgphoto2 and its
Am Samstag, 15. September 2007 schrieb Marco d'Itri:
> I have no reason to believe that this is an udev bug. You probably
> misconfigured your system in some way.
I haven't configured anything here. Its everything how it got installed.
> Please investigate this using e.g. udevinfo and udevtest.
Package: udev
Version: 0.114-2
Severity: normal
--- Please enter the report below this line. ---
Hi,
I'v got a Canon Powershot A80 (ID 04a9:309a Canon, Inc. PowerShot A80) and if
I connect it with my computer via USB the devices get created, but with the
wrong permissions.
E.g.
output of lsu
Am Mittwoch, 29. August 2007 schrieb Reinhard Tartler:>
> I've forwarded your bug report to sourceforge [1], where a xine developer
> has written this:
[...]
I've tested this with some of my flac files and it works for me now. Bug can
be closed.
Yours sincerely,
Matthias
--
To UNSUBSCRIBE,
Package: kdesktop
Version: 4:3.5.7-2
Severity: normal
--- Please enter the report below this line. ---
Hi,
I've got the problem that kdesktop does not set the energy saving settings on
startup anymore.
I normally use
Standby: 0Suspend: 0Off: 300
but now its always the default of xorg:
Package: libqt4-core
Version: 4.3.0-3
Severity: normal
--- Please enter the report below this line. ---
Hi,
i just wanna add that Qt 4.3.0 has a bug which ignores the background image
setting for QPushButton.
Also take a look at
http://trolltech.com/developer/task-tracker/index_html?method=ent
Package: pokerth
Version: 0.5+dfsg-1
Severity: normal
--- Please enter the report below this line. ---
Hi,
i just want to add that the Pushbuttons are not displayed properly, because of
a bug of Qt 4.3.0.
Yours sincerely,
Matthias
--- System information. ---
Architecture: amd64
Kernel:
Am Samstag, 14. Juli 2007 schrieb Luk Claes:
> Hi
>
> > libgnash0 currently depends on libcurl4-gnutls (>= 7.16.2-1) on amd64,
> > but libcurl4-gnutls is not available anymore.
> >
> > Is it possible to change this to libcurl3-gnutls?
>
> This was fixed in the above mentioned version. Please upgra
Package: libgnash0
Version: 0.7.2+cvs20070512.1554-1
Severity: serious
--- Please enter the report below this line. ---
Hi,
libgnash0 currently depends on libcurl4-gnutls (>= 7.16.2-1) on amd64,
but libcurl4-gnutls is not available anymore.
Is it possible to change this to libcurl3-gnutls?
T
Am Montag, 28. Mai 2007 schrieb Frank Küster:
> So is the problem now solved for you? If not, we need one of the
> temporary files.
Took some time, but yes.
Thanks for the help,
Matthias
Am Samstag, 26. Mai 2007 schrieb Norbert Preining:
> No, we do NOT depend on this, and there is *for*sure* no missing dep on
> fmtools. What do you mean with "fmtools"?
Oh thats weird... the first error I got was "missing fmtutil", after
installing "fmtools" fmtutil was found... Weird.
But then
Package: texlive-base
Version: 2007-7
Followup-For: Bug #425813
Hi,
I've got the same problem here. First there's a missing dependency
on fmtools (i had to install it manually) and then i get the same error:
Setting up texlive-base-bin (2007-9) ...
Running mktexlsr. This may take some time... d
Hi,
yes it is. And its a bug of both programs.
gtk-qt-engines shouldn't write directly into /usr/lib64, but in /usr/lib and
libc6 should use dh_link instead of packaging the link itself.
yours sincerely
Matthias
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe".
Package: pokerth
Version: 0.3-3
Severity: wishlist
Hi,
pokerth version 0.4 was release a week ago.
http://downloads.sourceforge.net/pokerth/PokerTH-0.4.tar.bz2
Would be nice if you could package it.
Yours sincerely,
Matthias
-- System Information:
Debian Release: lenny/sid
APT prefers unst
Package: k3b
Version: 0.12.17-9
Severity: normal
Hi,
first of all i'm using an sata CD writer. In the past i couldn't
burn any CD with k3b.
It works now, but in a strange way. Everytime i insert a blank cd-r
k3b claims its an cd-rw and asks if i wanna delete it. I always chose
"No", because it a
Package: amarok
Version: 1.4.4-4
Followup-For: Bug #411870
Hi,
I can confirm the bug that amarok does cut off the ends of the last song
in the playlist almost 2 seconds before the real end would be.
It happens with mp3 and flac files, so i think it's a general problem
with amarok and not just bo
Am Donnerstag, 8. Februar 2007 18:08 schrieb Frederic Peters:
> Matthias Heinz wrote:
> > Well, i saw this part in the postinst script, too. But i don't know what
> > went wrong there.
>
> But in the meantime you can run it now and it will fix your system.
It definitly d
Am Donnerstag, 8. Februar 2007 16:16 schrieb Frederic Peters:
> > No, it's an old one. It uses the normal mode.
>
> Actually I guess it also supports PTP (at least A70 did).
I tried both, only normal mode worked. Dont ask me why, i didn't had the time
yet to figure that out.
> > libgphoto2_gener
Hi,
Am Donnerstag, 8. Februar 2007 15:28 schrieb Frederic Peters:
> Is your camera using PTP ?
No, it's an old one. It uses the normal mode.
> What is its USB ID ?
ID 04a9:309a Canon, Inc. PowerShot A80
> What is the output of ls -l /etc/udev and ls -l /etc/udev/rules.d/ ?
ls -l /etc/udev/
Package: gphoto2
Version: 2.2.0-3
Severity: important
Hi,
I'm having a Canon A80 and today I tried to copy the
photos from the cam. So I plugged the camera in my
computer. gphoto -a worked, but getting a summary
wasn't possible (couldn't claim device).
First thing I thought was that i'm not in g
Hi,
Am Donnerstag, 30. November 2006 01:35 schrieb Filipus Klutiero:
> He said the ALSA plugin of xine engine, not the aRts engine ;)
>
> Anyway, Matthias, I have no idea why you'd have such a problem. Does this
> still happen with the current version?
Just tested it. The device is unlocked after
Package: vdrift
Version: 0.0.2006.02.21-1
Severity: wishlist
Hi,
there's a new upstream release of vdrift:
http://vdrift.net/article.php/20061006-release-src-autopackage
Regards,
Matthias
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstab
Package: kpilot
Version: 4:3.5.3-3
Severity: minor
Hi,
the postinst script should check if the device is really there,
before using chmod, because i get an error on every upgrade. I've got a usb
connector for my palm and i'm using
udev, so the device is only available if i'm pressing the hotsyn
Package: xine-ui
Version: 0.99.4-2
Severity: normal
Hi,
first i thought it could be a bug in amarok, but since it uses the
xine engine to playback i tried playing flacs with xine directly and
it's the same behaviour, so i guess it's a xine problem.
Long story, short conclusion: I'm unable to ski
Package: amarok
Version: 1.4.1-2
Severity: important
Hi,
since the upgrade to 1.4.1 it's impossible to get amarok play any flac.
I'm using the xine backend and xine is playing flacs without any
problems.
The error message is in german and i can't find the proper translation,
but i try to trans
the device always.
Regards,
Matthias Heinz
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1,
'experimental')
Architecture: i386 (i686)
Shell: /bin/sh
Package: kde
Severity: normal
Tags: l10n
Hi,
i don't know which package causes this problem but i know i'm not the
only one with it.
I'm using a german locale for KDE and everything is in german, every KDE
application. But if I start a non-kde program from kmenu it's in english (the
LANG
vari
Am Montag, 27. März 2006 20:32 schrieb Elimar Riesebieter:
[...]
Ok, I found the solution to my problem but somewhere other than in the config
file.
I wrote a local udev rule to change the name of the event device to laserG5...
Now, it seems that the parser identifies the device by the string g
Am Sonntag, 26. März 2006 23:37 schrieben Sie:
> Please tell us the output of
>
> $ cat /proc/bus/input/devices
>
> Elimar
Here we go:
$ cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/c
Am Sonntag, 26. März 2006 18:15 schrieb Elimar Riesebieter:
> Try
>
> Section "InputDevice"
> # This is evdev with 6.9.0-5
>Identifier "Mouse"
>Driver "evdev"
>Option "CorePointer"
>Option "Phys" "usb-*/input0" #cat /proc/bus/input/devices
> EndSect
Package: xorg
Severity: important
Hi,
i'm using evdev with my mouse to get all the buttons to work and since
the last upgrade X doesn't startup anymore with this entry.
The section is
--snip--
Section "InputDevice"
Identifier "Configured Mouse"
Driver "evdev"
Option "Co
1 - 100 of 105 matches
Mail list logo
