Le 08/05/2025 à 00:56, Thorsten Glaser a écrit :
severity 1104892 normal
thanks
(This isn’t a bug in the package per se but the way to install
it is difficult by necessity.)
On Wed, 7 May 2025, Jean-Marc LACROIX wrote:
Consider following log
This is hard to read for nōn-french
in advance for you help
Best regards
--
-- Jean-Marc LACROIX () --
-- mailto : jeanmarc.lacr...@free.fr --
your quick response.
I now understand why this behavior is the same on Debian Trixie.
Apologies for the severity; I thought it was a simple build issue. I
think you can close this bug report permanently.
Best regards
--
-- Jean-Marc LACROIX () --
-- mailto : jeanmarc.lacr...@free.fr --
Done
Package thunderbird is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'thunderbird' has no installation candidate
Thanks in advance for you help
--
-- Jean
Le 06/04/2025 à 21:10, Salvatore Bonaccorso a écrit :
Control: tags -1 + moreinfo
On Sun, Apr 06, 2025 at 07:25:04PM +0200, Jean-Marc LACROIX wrote:
Package: linux-image-amd64
Version: 6.1.129-1
Severity: wishlist
Dear kernel support team,
Could you please set CONFIG_EDAC_DEBUG (Error
Le 06/04/2025 à 21:10, Salvatore Bonaccorso a écrit :
Control: tags -1 + moreinfo
On Sun, Apr 06, 2025 at 07:25:04PM +0200, Jean-Marc LACROIX wrote:
Package: linux-image-amd64
Version: 6.1.129-1
Severity: wishlist
Dear kernel support team,
Could you please set CONFIG_EDAC_DEBUG (Error
in advance
--
-- Jean-Marc LACROIX --
-- mailto : jeanmarc.lacr...@free.fr --
Le 03/04/2025 à 22:19, Salvatore Bonaccorso a écrit :
Control: severity -1 normal
Control: tags -1 + moreinfo
Hi,
On Thu, Apr 03, 2025 at 12:08:27PM +0200, Jean-Marc LACROIX wrote:
Package: firmware-atheros
Version: 20230210-5
Severity: grave
Dear maintainers,
It seems there is one
Associated Tx-Power=0 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Conclusions:
It seems there is one issue on this package
Thanks in advance for you help
Best regards
--
-- Jean-Marc LACROIX --
-- mailto : jeanmarc.lacr...@free.fr --
id#PIDFILE=/run/mosquitto.pid#g'
/etc/init.d/mosquitto
Best regards
--
-- Jean-Marc LACROIX --
-- mailto : jeanmarc.lacr...@free.fr --
ixie firmware package.
Regards
--
-- Jean-Marc LACROIX (06 82 29 98 66) --
-- mailto : jeanmarc.lacr...@free.fr --
u-boot
root@hn-cubietruck-120:~# TATARGET=/usr/lib/u-boot/Cubietruck
/usr/bin/u-boot-install-sunxi /dev/mmcblk1
Thank in advance to change dependencies into u-boot-sunxi package
Best regards
--
-- Jean-Marc LACROIX (06 82 29 98 66) --
-- mailto
#1 Debian 6.1.27-1
Best regards
--
-- Jean-Marc LACROIX (06 82 29 98 66) --
-- mailto : jeanmarc.lacr...@free.fr --
firmware
package.
Regards
Cordialement
--
-- Jean-Marc LACROIX (06 82 29 98 66) --
-- mailto : jeanmarc.lacr...@free.fr --
--exclude from debootstrap ?
Thanks in advance
Cordialement
--
-- Jean-Marc LACROIX (06 82 29 98 66) --
-- mailto : jeanmarc.lacr...@free.fr --
Hello,
I confirm the same issue on vmdb2 recent :
ii vmdb2 0.27+really.0.26-1
all creator of disk images with Debian installed
Is there one solution ?
Thanks in advance for you help
Cordialement
--
-- Jean-Marc LACROIX (06 82 29 98 66
wpa_supplicant.if-sta0.conf -f
/var/log/wpa_supplicant/wpa_supplicant.log -t -dd
Best regards
--
-- Jean-Marc LACROIX (06 82 29 98 66) --
-- mailto : jeanmarc.lacr...@free.fr --
Candidate: 1:78.8.0-1~deb10u1
Version table:
*** 1:78.8.0-1~deb10u1 100
90 http://ftp.de.debian.org/debian buster/main armhf Packages
100 /var/lib/dpkg/status
ansible@vn-bullseye-armhf-260:~$
Conclusions:
Why thunderbird is whith one oldrelease on target
v
On 02/03/2023 16:16, Marco d'Itri wrote:
On Mar 02, Jean-Marc LACROIX wrote:
I am trying to install (via debootstrap) one rootfs in one secured LXC
container. My current problem is due to the package usrmerge which is not
instalable.
Is the usr-is-merged package installed?
Is /lib a sy
On 02/03/2023 14:25, Luca Boccassi wrote:
On Thu, 2 Mar 2023 at 12:30, Jean-Marc LACROIX wrote:
On 02/03/2023 13:13, Luca Boccassi wrote:
Control: tags -1 moreinfo
On Thu, 2 Mar 2023 13:00:00 +0100 Jean-Marc LACROIX
wrote:
Source: usrmerge
Version: 35
Severity: normal
Dear Debian team
On 02/03/2023 13:13, Luca Boccassi wrote:
Control: tags -1 moreinfo
On Thu, 2 Mar 2023 13:00:00 +0100 Jean-Marc LACROIX
wrote:
Source: usrmerge
Version: 35
Severity: normal
Dear Debian team,
I am trying to install (via debootstrap) one rootfs in one secured
LXC
container. My current
ives/usrmerge_35_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@vn-bookworm-arm64-130:~#
Thans in advance for your help
Cordialement
--
-- Jean-Marc LACROIX (06 82 29 98 66) --
-- mailto : jeanmarc.lacr...@free.fr --
Le 07/10/2022 à 18:29, Colin Watson a écrit :
Control: severity -1 normal
Control: fixed -1 3.5-1
On Fri, Oct 07, 2022 at 05:29:14PM +0200, Jean-Marc LACROIX wrote:
Severity: critical
"makes unrelated software on the system (or the whole system) break, or
causes serious data los
Package: parted
Version: 3.4-1
Severity: critical
Dear maintainers,
According documentation available in man it seems possible to create one
partition of type "swap" by using "set" option on command line.
After many tests done with Linux "parted" command and Ansible module
"parted", it seems
e warning
message ([ref 2]) ?
Any ideas or suggestions will be appreciated (!)
Cordialement
--
-- Jean-Marc LACROIX (06 82 29 98 66) --
-- mailto : jeanmarc.lacr...@free.fr --
ean-marc@vm-bullseye-arm64-280:~$ uname -a
Linux vm-bullseye-arm64-280 5.10.0-0.bpo.5-arm64 #1 SMP Debian
5.10.24-1~bpo10+1 (2021-03-29) aarch64 GNU/Linux
jean-marc@vm-bullseye-arm64-280:~$ cat /etc/debian_version
bullseye/sid
jean-marc@vm-bullseye-arm64-280:~$
-
best regards
-----
Package: apt-cacher-ng
Version: 3.2.1-1
Severity: grave
Dear maintainers,
It seems there is one bad exit code issue (=0) when trying to start
démon if internal check is bad. (/etc/init.d/apt-cacher-ng start)
ansible@srv-apt-cache-400:~$ dpkg -l |grep apt-cache
ii apt-cacher-ng
Package: syslog-ng
Version: 3.19.1-5
Severity: grave
Dear maintainers,
On amd64, i have following error
==> /var/log/syslog-ng/current_logs/BY_FACILITY.kern.notice.log <==
2020-09-15T08:25:53+02:00 s_dev_kernel_kmsg@asus-190 kernel:
6,35313,87037029084,-;syslog-ng[10311]: segfault at 0 ip
ansible@vm-buster-amd64-190:~$
Sorry for the inconvenience, please close this bug
Le 09/09/2020 à 11:07, Jean-Marc LACROIX a écrit :
Le 09/09/2020 à 10:53, Julien Cristau a écrit :
Control: tag -1 moreinfo unreproducible
On Wed, Sep 09, 2020 at 10:23:53AM +0200, Jean-Marc LACROIX wrote:
Package
Le 09/09/2020 à 10:53, Julien Cristau a écrit :
Control: tag -1 moreinfo unreproducible
On Wed, Sep 09, 2020 at 10:23:53AM +0200, Jean-Marc LACROIX wrote:
Package: xbase-clients
Version: 3.2-2
That is not the version of xbase-clients in any Debian release as far as
I can tell.
Severity
Package: xbase-clients
Version: 3.2-2
Severity: grave
Dear maintainers,
It seems there is a dependancy issue (?) when trying to install
xbase-clients Debian buster 10.5 package.
The installation in done on one LXC container running with sysvinit,
and without droping any Posix 1003.2 capabilit
Hello,
Thanks for your reply.
Please, find in attached file my configuration.
Best regards
Jean-Marc
Le 3/6/20 à 7:45 AM, Eduard Bloch a écrit :
Control: tags 952811 +moreinfo
Hallo,
* Jean-Marc LACROIX [Sat, Feb 29 2020, 05:25:53PM]:
Package: apt-cacher-ng
Version: 3.2-2
Severity: grave
Package: apt-cacher-ng
Version: 3.2-2
Severity: grave
Dear maintainers,
It seems there is a cache or DNS issue (?) sometimes when trying
to access from my internal local network to public Internet.
My clients targets are either armhf, either arm64 or amd64 running
Debian Buster 10.3
Apt-cacher
Hi,
Le 2/17/20 à 2:27 PM, Guillem Jover a écrit :
Hi!
On Mon, 2020-02-17 at 13:48:30 +0100, Jean-Marc LACROIX wrote:
Le 2/17/20 à 12:18 PM, Simon Richter a écrit :
On Mon, Feb 17, 2020 at 10:31:25AM +0100, Jean-Marc LACROIX wrote:
dpkg: unrecoverable fatal error, aborting:
files list
ion that works in 100% of cases ...
Le 2/17/20 à 12:18 PM, Simon Richter a écrit :
Hi,
On Mon, Feb 17, 2020 at 10:31:25AM +0100, Jean-Marc LACROIX wrote:
dpkg: unrecoverable fatal error, aborting:
files list file for package 'base-passwd' is missing final newline
E: Sub-process /usr
Package: python-apt
Version: 1.8.4.1
Dear maintainers,
It seems there is a dependency issue (?) when installing python-apt as
indicated in following trace. On previous Debian buster (10.2), this
issue does not exist.
root@vm-ssh-190-factory:~# cat /etc/debian_version
10.3
root@vm-ssh-190-
Dear Sergey,
It seems that on Debian 10.3, monit is now available without any
issue...because
ansible@srv-mmonit-110:~$ dpkg -l |grep monit
ansible@srv-mmonit-110:~$ cat /etc/debian_version
10.3
I have taken into account your recommendation regarding the backports
package.
Now, my preferen
Package: monit
Version: 1:5.20.0-6
Severity: grave
Dear maintainers,
Many thanks for the packaging of this application on Debian Gnu/Linux.
It seems there is one dependancy change (?) on recent monit Buster 10.2.
As a result, it is not more possible to install monit Debian package
on Buster 10.
Package: apt-cacher-ng
Version: 3.2-2
Severity: important
Dear maintainers,
Many thanks for the packaging of this application ().
Two questions about this application.
After reading the documentation and many blogs on Internet, it seems
not possible to set maximum size to the parameter :
Package: xarchiver
Version: 1:0.5.4.14-1
Severity: grave
Dear maintainers,
It seems there is a dependency issue when installing xarchiver as
indicated in following trace.
My target is either armhf, either arm64 Debian Buster 10.1
My test conditions are ...
ansible@vm-buster-armhf-110:~$ cat
Le 10/09/2019 à 13:35, Dmitry Bogatov a écrit :
[2019-09-08 17:53] Jean-Marc LACROIX
> Please:
>
> * Try installing something else, like `tor'. I expect you will get
> similar error (`tor' depends on libsystemd0, sigh)
ansible@pinebook:~$ sudo apt install
Package: python-dev
Version: 2.7.16-1
Severity: grave
Dear maintainers,
It seems there is a dependency issue when installing python-dev as
indicated in following trace.
My target is one arm64 Pinebook Debian buster 10.1
My test conditions are ...
ansible@pinebook:~$ uname -a
Linux pinebook
e generated breaks, this may be
caused by held packages.
Le 01/09/2019 à 15:23, Dmitry Bogatov a écrit :
control: tags -1 +moreinfo
[2019-08-30 16:44] Jean-Marc LACROIX
Package: sysvinit
Version: 2.93-8
Severity: grave
Dear maintainers,
It seems there is a dependency issue when installing sysvini
Package: sysvinit
Version: 2.93-8
Severity: grave
Dear maintainers,
It seems there is a dependency issue when installing sysvinit-core as
indicated in following trace
ansible@pinebook:~$ LC_ALL=C LANG=C LANGUAGE=C sudo apt install
sysvinit-core
Reading package lists... Done
Building depend
ion files for ffmpeg (7:4.1.1-1) ...
You can close this bug, it was a problem of dependencies with other
packages for an unknown reason, because for my point of view, none
stretch-backports can be installed according to my preferences.
Regards
Le 23/04/2019 à 16:27, Aurelien Jarno a écrit :
Package: lm-sensors
Version: 1:3.4.0-4
Dear maintainer,
I'm trying to install thelm-sensors package on a running LXC
container on Debian Stretch V9.8, (arch = amd64)
It seems that my environment is ok, as shown in the rest of my
configuration
ansible@srv-owncloud-100:~$ ip ro
Hi,
According to previous tests, due to a serious bug in the
post-installation scripts, it is no longer possible to reinstall or
remove any type of package. The system is then definitely unusable.
Thanks in advance to apply following patch
To reproduce :
step 1: no hostapd on the syste
Hi,
I am trying to install on Debian buster hostapd release on stretch target
This job was ok in december 2018, but now, it seems there is one
regression in the package, because :
ansible@srv-authenticator-100:~$ sudo apt install -t buster hostapd
Reading package lists... Done
Building depend
Package: hostapd
Version: 2:2.7+git20190128+0c1e29f-2
Dear maintaniers,
On Debian Buster, it seems not possible to uninstall hostapd package
afterinstallation.
Furthermore, i can not launch daemon.
My current configuration before installing hostapd is :
(with sysvinit, not systemd !)
a
Package: procps
Version: 2:3.3.12-3+deb9u1
Severity: normal
Dear Maintainer,
On target armhf with Debian 9.4 up to date, when trying to install
procps package, i have following error:
ansible@vm-stretch-armhf-2:~$ uname -a
Linux vm-stretch-armhf-2 4.14.18-sunxi #24 SMP Fri Feb 9 16:24:32 CET
ontrol: tags -1 unreproducible moreinfo
On 05/05/18 15:25, Jean-Marc LACROIX wrote:
Dear maintainers,
There is a stupid bug in ulogd2 configuration file based on X86
architecture plateform, so that ulogd2 package is unuseable.
When running ulogd2 daemon on armhf, of course all packages
Package: ulogd2
Version: 2.0.5-5
Severity: critical
Dear maintainers,
There is a stupid bug in ulogd2 configuration file based on X86
architecture plateform, so that ulogd2 package is unuseable.
When running ulogd2 daemon on armhf, of course all packages
and dependancies are correct
Hi,
Is seems that on Debian Stretch 9.4 with sysvinit package, this bug is
always alive (!)
ansible@srv-orangepi0-1:~$ sudo /etc/init.d/saned stop
[] Stopping SANE network scanner server: sanedstart-stop-daemon:
invalid schedule item (must be [-], -,
or 'forever'
Try 'start-stop-daemon
(no description available)
ii locales 2.7-18 GNU C Library: National Language (
Best regards
--
------
-- Jean-Marc LACROIX --
-- mailto : jeanmarc.lacr...@free.fr --
---
--
that all files are named with pattern matching
such as /var/log/syslog-ng/*.log in configuration file
/var/log/syslog-ng/*.log {
nomail
noolddir
daily
create
compress
notifempty
rotate 10
size1M
start 0
compressoptions -9
extensi
root access
--
------
-- Jean-Marc LACROIX --
-- mailto : jeanmarc.lacr...@free.fr --
---
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
n/snmpd.pid 127.0.0.1
-> sudo ls -altr /proc/net/snmp -n
-r--r--r-- 1 0 10001 0 2008-02-29 17:43 /proc/net/snmp
[
Many thanks in advance if you can correct this problem
best regards.
--
--
-- Jean-Marc LACROIX --
-- mailto : [EMAIL PROTECTED] --
---
Package: iptables
Version: 1.3.6.0debian1-5
distrib Debian Etch
-> uname -a
Linux syspeo 2.6.23.jml-054 #1 SMP PREEMPT Thu Oct 11 22:32:06 CEST 2007 i686
GNU/Linux
-> dpkg -l |grep libc6
ii libc6 2.3.6.ds1-13 GNU C Library: Shared libraries
I would like to use iptables for igmp procotol. I
Selon Kurt Roeckx <[EMAIL PROTECTED]>:
> severity 448811 normal
> merge 413894 448811
> thanks
>
> On Thu, Nov 01, 2007 at 07:39:21AM +0100, Jean-Marc Lacroix wrote:
> > Package: ntp
> > Version: 4.2.2.p4+dfsg-2
> > Severity: serious
> >
> >
Package: ntp
Version: 4.2.2.p4+dfsg-2
Severity: serious
On a dedicated 86 Linux router launching ntp server vith ip alias
interface, I would like to run ntpd in order to listen ntp traffic only
on a single virtual interface. ( It seems the definition of -L option )
My config is ...
-> uname -a
acking system administrator
> (administrator, Debian Bugs database)
>
>
>
>
>
> Sujet:
> Re: Bug#394047: "eth1" rename to "eth1_rename" when inserting ethernet
> module
> Expédite
Marco d'Itri a écrit :
> On Oct 19, Jean Marc Lacroix <[EMAIL PROTECTED]> wrote:
>
>
>> When inserting driver ethernet module, the kernel rename the interface name
>> from eth1 to eth1_rename as follow.
>>
> Please provide the content of /
4 brd 192.168.1.255 scope global eth0
inet 192.168.2.9/24 brd 192.168.2.255 scope global eth0:50
inet6 fe80::5054:ff:feeb:e816/64 scope link
valid_lft forever preferred_lft forever
11: eth1_rename: mtu 1500 qdisc noop qlen 1000
link/ether 00:10:83:01:3b:b8 brd ff:ff:ff:ff:ff:f
ached file..
Please add port number on error on STDERR before existing, because it seems
there are
many binding socket connection ( in trace )
best regards
--
------
-- Jean-Marc LACROIX --
-- mailto : [EMAIL PROTECTED] --
---
n the logs. Maybe there are other limitations, but at
> least this one should IMHO be mentionned, so people do not waste time
> figuring it out.
>
>
>
>
--
--
-- Jean-Marc LACROIX --
-- mailto : [EMAIL PROTECTED] --
---
AIL PROTECTED] (charmap=ISO-8859-1)
(ignored: LC_ALL set to fr_FR.ISO-8859-1)
Versions of packages autofs depends on:
ii debconf 1.4.30.11Debian configuration
management sy
ii libc6 2.3.2.ds1-20 GNU C Library: Shared
libraries an
--
-------
nks
Jean Marc LACROIX <[EMAIL PROTECTED]> wrote:
Hi Jean Marc,
[EMAIL PROTECTED]:~]
-> cat /etc/sane.d/saned.conf
192.168.0.0/16
You don't need that on the client. (/etc/sane.d/net.conf is the config
file you're looking for)
The problem is important, because it is not possible t
PROTECTED]:~]
As you can see, the answer is now correct, because i have a such scanner
on obiwan host.
The 2 sequences are the same, and i have made a ethereal on tcp
connection. There is only one difference in last tcp transaction from
obiwan to client d2r2 before closing the connection, this is
68 matches
Mail list logo
