Bug#909590: gerbera: Gerbera fails on start and every 5 sec

Hello James, I did consider the questions you asked and I solved the problem by reinstalling package 'file' and then its dependencies : libc6 libmagic1 zlib1g . Maybe only one was faulty but it is so quick and painless to do... It was a system wide problem and not a gerbera bug. Maybe one fil

Bug#909590: gerbera: Gerbera fails on start and every 5 sec

Hi James, here is what you ask for : root@mercury:~# gerbera --version gerbera: /lib/arm-linux-gnueabihf/libc.so.6: version `' not found (required by /lib/arm-linux-gnueabihf/libmagic.so.1) root@mercury:~# file /etc/group Erreur de segmentation root@mercury:~# ls -l /lib lrwxrwxrwx 1 root ro

Bug#864562: u-boot: broken ethernet support on Olimex A20-Olinuxino-Micro Rev. J

Hello Karsten, thank you for your action and the information. I will quickly test the new installer when available. For the future, Olimex is working on a firmware that will make possible a single installer for all their A20 boards. Nice ! For more information, have a look to the blog : ht

Bug#864562: No ethernet link on Olimex A20-Olinuxino Micro Rev. J, possibly PHY driver problem

rk is still working when the system reboots ! Do you think it is necessary ? Regards Jean-Louis Mounier Le 16/10/2017 à 22:45, Karsten Merker a écrit : On Mon, Oct 16, 2017 at 09:39:36PM +0200, Jean-Louis Mounier wrote: for some reasons, I changed my mail configuration and I discovered your

Bug#864562: No ethernet link on Olimex A20-Olinuxino Micro Rev. J, possibly PHY driver problem

ear PA17 gpio: pin PA17 (gpio 17) value is 0 =>run bootcmd after that, the installer got IPV4 and IPV6 addresses wwith DHCP and then ran fine. Hope it helps Regards Jean-Louis Mounier

Bug#864562: No ethernet link on Olimex A20-Olinuxino Micro Rev. J, possibly PHY driver problem

Hello Karsten, thank you for your investigations and sorry for the delay : I have many lives... here is the test result : U-Boot 2016.11+dfsg1-4 (Mar 27 2017 - 18:39:51 +) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: Olimex A20-Olinuxino Micro I2C: ready D

Bug#864562: Info received (Bug#864562: No ethernet link on Olimex A20-Olinuxino Micro Rev. J, possibly PHY driver problem)

Hello, I've just read Olimex Blog and found the following text about my board (which is a J Release). /We are selling for some time already //A20-OLinuXino-MICRO //Rev.J where few thin

Bug#864562: No ethernet link on Olimex A20-Olinuxino Micro Rev. J, possibly PHY driver problem

Hello Karsten, I installed Stretch on my A20 with the USB network interface. After a successfull minimal installation (on the Micro SD card), I configured eth0 and rebooted the system. The result is the same : the PHY is unable to get an IP address with DHCP. The problem witch 4.9.0-3-armmp-

Bug#864562: No ethernet link on Olimex A20-Olinuxino Micro Rev. J, possibly PHY driver problem

Hello Karsten, thank you for all your informations about A20 specifications. I will test them ASAP ! I guessI will spend time on uboot... However, I have a new information about Jessie on my A20-Olinuxino Micro. Yesterday night, I installed Jessie on my board using my USB-Ethernet interface.

Bug#864562: Installation on Olimex A20-Olinuxino Micro

Package: debian-installer Hello, I'm the new owner of my second Olimex A20-Olinuxino Micro (Rev J) board. I tested the board with a pre-installed Micro-SD card (A20-OLinuXino-MICRO Debian Jessie with kernel 3.4.103+ release 14) and it runs fine. My challenge is to install Debian on this board

Bug#669052: [regression 3.2.12 -> 3.2.14] r8169 driver not automatically loaded

The package is installed... (8.029.00-1) Jean-Louis Le 28/04/2012 16:57, Jonathan Nieder a écrit : reassign 669052 r8168-dkms 8.029.00-1 retitle 669052 r8168-dkms: breaks r8169 when removed but not purged affects 669052 + src:linux-2.6 quit Jean-Louis Mounier wrote: /etc/modprobe.d/r8168

Bug#669052: [regression 3.2.12 -> 3.2.14] r8169 driver not automatically loaded

Hello Jonathan, here it comes, Regards Jean-Louis Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit From: Jean-Louis Mounier To: Debian Bug Tracking System Subject: initramfs-tools: none Package: initramfs-tools Version: 0.101 Severity

Bug#669052: [regression 3.2.12 -> 3.2.14] r8169 driver not automatically loaded

Following your instructions, I did install linux-image-3.2.0-2-amd64 version 3.2.12-1 (after commenting the r8169 line in /etc/modules). uname -a gives : Linux morisson 3.2.0-2-amd64 #1 SMP Tue Mar 20 20:45:09 UTC 2012 x86_64 GNU/Linux (just for verification) The system comes faulty : the on

Bug#669052: Bug 669052 : Re: [regression 3.2.12 -> 3.2.14] r8169 driver not automatically loaded (Re: Bug...)

Hello Jonathan, sorry for my last subject line...I wrote it from my office and I should have think to include at least the bug number in the subject... modprobe r8169 : I should have think to do this obvious test ! :-! It works ! The sequence : modprobe r8169 ifup eth0 made my server fully

Bug#669052: linux-image-3.2.0-2-amd64: NIC RTL-8169 not loaded with last testing release

Package: linux-2.6 Version: 3.2.14-1 Severity: grave Justification: renders package unusable Hi, on Apr, 15, as I do almost every day, I did upgrade my testing release. The kernel 3.2.0-2-amd64 upgraded from 3.2.12-1 to 3.2.14-1. After reboot, my eth0 NIC is no longer detected. I installed firmwa

Bug#397511: dbus hang

I conrfirm, when starting my server in recovery mode, if I start nscd before ^D, dbus starts fine otherwise it hangs. I think on my server dbus start process relies on nscd to validate user messagebus. I'll be here this evening for further testing Jean-Louis -- To UNSUBSCRIBE, email to d

Bug#397511: Dbus hangs

My home server, which uses nss and ldap, hangs at bootup when starting dbus Dbus starts with user messagebus, maybe user authentication uses nss to check user messagebus. Nss then cals ldap which is not running yet I'll try to hack service dependencies this evening... May help Jean-Louis

Bug#593083: Bug 593083

Hello, I am also concerned by this bug on my AMD64 under SID . The login is freezed but I still have a ssh access from another machine on my home network, very usefull ! I red a message on console very early at initial boot : udevd(51]: error: runtime directory '/run/udev' not writable, fo

Bug#553201: Phonon bug

I have two PCs, one EEEpc701 and a AMD64 with sound blaster EMU10K1. both SID, freshly updated. I use Xine backend on both. On the EEEpc the HDA Intel card is visible under KDE sound config, as jack Audio Connection kit. The sound test runs fine with both "peripherals" The sound blaster is no

Bug#319244: Possible solution....

based on a previous openssh release during some weeks... Thank you very much Best regards -- *Jean-Louis MOUNIER - ZOLUX* *IT Manager* * *

Bug#445566: Samba bug : smbclient returns string length +1 of the first character and description (funny #)

s from source but I can learn fast if it can help you and I have a NSLU2 for testing.. -- *Jean-Louis Mounier * *IT manager*

Bug#375077: Problem still not solved ?

I am a ldap and libnss-ldap user. I just installed a fresh system last saturday and it seems to that the /lib/init/rw directory is not created during libnss-ldap package installation, so that the fix doesn't work. I had to create this directory by hand to make my system start normaly. Maybe

Bug#308098: acknowledged by developer (Re: Bug#308098: libsane: fail my canon N650U on USB hub, works fine without the hub)

uired=4.0 tests=BAYES_00,HAS_BUG_NUMBER autolearn=no version=2.60-bugs.debian.org_2005_01_02 X-Spam-Level: Jean-Louis Mounier <[EMAIL PROTECTED]> wrote: The scanner works fine when plugged directly on the PC, it fails when using a USB HUB betwwen the scanner and the PC. I ge

Bug#308098: libsane: fail my canon N650U on USB hub, works fine without the hub

Package: libsane Version: 1.0.15-9 Severity: important -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (800, 'testing'), (70, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.11 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of