in the last message I should have wrote that /etc/profile is never read by
the root user and thus the paths ending in sbin are not in the PATH
variable. /etc/profile might be read by the ordinary (non-root) user but I
don't know how it would happen when one logs into the GUI with no shell
explicit
I installed Debian 10 from a usb drive, had this problem, and solved it..
The PATH environment variable is set in /etc/profile but since /etc/profile
is only run by a login shell and there is no login shell, /etc/profile
never runs and it never has a chance to set PATH. I use the lxde GUI.
Booting
Package: aptitude
Version: 0.8.11-3
Severity: normal
Dear Maintainer,
I have a free dial-up connection to the inernet and do long (like
overnight) unattended downloads. When the connection is lost my wvdial
program redials and a few minutes later reestablises a connection of my
computer with the
Package: console-setup
Version: 1.185
Severity: important
Dear Maintainer,
I copied linux from a 20-yr old disk to a brand new one 100 times as large
in GB. But what I copied is only 2-3 years old so I updated it using
aptitude and have several problems, one of which I'll describe here. The
old
Package: lprng
Version: 3.8.B-2.1
Severity: important
Dear Maintainer,
I used aptitude to upgrade packages and it somehow converted sysv init to
systemd init. Most updated packages installed OK except lprng failed to
configure. I tried installing it on another drive (that has some unknown
corru
t from a
flash drive. I'm connecting via free dial-up provided by Southern
California Freenet (I think it's the last FreeNet left in the USA). Slow
but I'm willing to wait days for upgrading.
>
> Cheers
> Stuart
>
> --
> Stuart Prescotthttp://www.nanonanonano.net/ stu...@nanonanonano.net
> Debian Developer http://www.debian.org/ stu...@debian.org
> GPG fingerprint90E2 D2C1 AD14 6A1B 7EBB 891D BBC1 7EBB 1396 F2F7
David Lawyer
F0F382A1A7B6500)
I: Retrieving Packages
E: Couldn't download
http://debian.usu.edu/debian/dists/stretch/main/binary-i386/Packages
debootstrap needs to find one of the compressed files. download it, and
unconpress it. But it doesn't.
David Lawyer
Package:systemd
Version:237-4
My ISP blocks ntp and the ntp package isn't installed. When I type:
timedatectl I see "Failed to determine whether NTP is enabled:" and don't
see the info nomally displayed.
David Lawyer
Package: mutt
Version: 1.7.1-5
Here's the /etc/rc.local script I use to set colors.
Note that I send ESC[8] to set as default. Other programs such as vim
restore the default colors after exiting but mutt doesn't nor does it use
these colors.
# rc.local
#
# This script is executed at the end of e
The problem is fixed. I found some very old .x.. configuration files in my
home directory and root directory. They said to use icewm which is in
conflict with the lxde/lightdm setup I'm now using. I removed them and
the problem is gone.
David Lawyer
display is
fixed-space (mono-spaced) but the font is variable-width (non-mono
spaced).
One fix is just to not provide variable-width fonts for lxterminal..
David Lawyer
Package: lxde_9_all
Version: no versioning
I don't know what part of lxde (or other program) is causing this problem.
lxde_commom is v. .99.2-3.
When I make a mistake loging into lxde, it asks me to try again but will
not log me in.
David Lawyer
On Tue, Jul 11, 2017 at 12:10:49PM -0400, Felipe Sateler wrote:
> (Please always keep the bug in CC).
>
> On Sun, Jul 9, 2017 at 1:11 AM, David Lawyer wrote:
>
> > On Thu, Jul 06, 2017 at 04:15:34PM -0400, Felipe Sateler wrote:
> > > Control: tags -1 moreinfo
> &g
4.9.30-2 (2017-06-12) i686 GNU/Linux.
Process root (#1) is init and not systemd. pulse starts up at boottime
since "pulseaudio.desktop" is found in /etc/xdg/autostart/ and X starts at
boottime which apparently executes the files in the above autostart
directory..
David Lawyer
Package: mutt
Version:1.8.3+neomutt20170609-2
When I type c to change mailboxes , I see the message ('?' for list). Yet
if I type ? I don't see the long list of my mailboxes but instead see my
incoming mailbox dave (path: /var/spool/mail/dave). I want to see the
mailboxes in ~/Mail.
I had to re
or someone else. The pid always maps
to lxpolkit. You have to click "OK" on this error message to get rid of
it.
David Lawyer
On my console I use 16x32 font which is large.
Should xterm give the option of using the same fonts as for the console?
This would be of value if one has already set up the fonts for the
console, (as I have) since the default console fonts seem to also be way
too small.
David Lawyer
haps it just shouldn't be displayed at all or
possibly only if over 50% of free memory is allocated, etc.
David Lawyer
On Tue, May 09, 2017 at 07:48:53PM -0400, Thomas Dickey wrote:
> On Mon, May 08, 2017 at 09:17:22PM -0700, David Lawyer wrote:
> > Package: lynx
> > Varsion: 2.8.9dev13-l
> >
> > When I type in a search string (in English) to Google or Bing and the
> > length
rw,noauto,user,noexec, 0
1
David Lawyer
oed to the screen). This problem was not present in
dev11-1. I suspect that this bug is due to the fix for another bug
involving the echoing of multi-byte characters #841155 which dev13-1
fixed. But it seems that this fix has resulted in a new bug.
David Lawyer
oed to the screen). This problem was not present in
dev11-1. I suspect that this bug is due to the fix for another bug
involving the echoing of multi-byte characters #841155 which dev13-1
fixed. But it seems that this fix has resulted in a new bug.
David Lawyer
t if I type "setterm -foreground blue
I get a a significantly deeper blue.
David Lawyer
nstalled about a couple of months ago and may have booted the PC
with it perhaps 60 times with no delay like this. However, I upgraded the
kernel to -pae perhaps a couple of weeks ago. There are now 2 HD's on my
PC, one SATA (ata30) and the other a slower PATA with a ribbon cable.
ation anymore but
uses lba addressing. So either have -P ignore by default in lilo or
change fdisk so that it creates the obsolete CHS format on the disk.
David Lawyer
d to change
layouts within a variant (assuming that a switch_latch is like a toggle).
For example the rus variant of the us layout includes both a latin and
Cyrillic (Russian) character set with level 3 being the latin characters.
This is tantamount to a variant within a variants.
David Lawyer
oted in the documentation.
David Lawyer
HTTP sites that I can use, Today
I tried again I it did find one HTTP site out of 10 tested.
David Lawyer
UTF-8"
CODESET="Uni3"
FONTFACE="Terminus"
FONTSIZE="16x32"
David Lawyer
it does show the burst running for
awhile (a minute or two).
So why isn't it working? I'm running Debian 4.2.3 on an old Pentium I PC.
And I updated using aptitude in Nov. 2015 which might be about when
problems with chrony started (but I failed to investigate them then).
David Lawyer
shown in white on blue,
there's no need for a moving overall progress bar which is much less
accurate to read than the numerical value in %.
David Lawyer
> On 2014-03-28 David Lawyer wrote:
> > Package: exim4_4.82-5_all
> > Version: 4.82-5
>
> > I have 4 exim4 packages installed for each version. When I updated
> > exim4 from 4.80-4 to 4.82-5, exim broke since it would not output
> > email to my smart-host
fter repeating the TO:
address says "Relaying denied. Proper authentation required." It's obvious
this is happening because of the failure of 4.82 to send any authentication to
the server.
David Lawyer
Diff results (wdiff) for debugging exim4 4.80 (blue) and 4
booting something to
the effect of IP-Config: no response after 2 sec., giving up but the
messages flash by so fast I can't read them well.
The server is i586 and the client is i686 both running the same OS which
should work on both.
David Lawyer
--
To UNSUBSCRI
Package:fetchmail
Version: 6.3.21-4
In the FAQ "you could up" should be replaced with "you could end up" or
"you could wind up"
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "uns
Package: xserver-xorg-core
Version: 1.12.4-5_i386
When I type startx, the xserver crashes. I found on the internet that
others report a crash due to the vgahw module (actually libvgahw.so). Note
that this module is part of the core package. Heres the log:
[ 13059.599]
X.Org X Server 1.12.4
Rel
On Sat, Aug 25, 2012 at 12:37:26PM -0400, Thomas Dickey wrote:
> On Thu, Aug 23, 2012 at 11:16:55AM -0700, David Lawyer wrote:
> > Package: lynx-cur
> > Version: 2.88dev.12-2
> >
> > When I go to the website yandex.ru (Russian search engine) and type in
> > 2-byte
is erratic (tabs spaced 2-20 chars.
apart, etc.).
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
etc/email-addresses to
rewrite From's (F flag) but not To's (T flag) which I need so I had to
add this.
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
e sent by the server
is not acceptable (not long enough).
Here's how I fixed it based on what someone else did per the Internet:
Create file /etc/exim4/exim4.conf.localmacros and add the line:
TLS_DH_MIN_BITS = 512
David Lawyer
--
To UNS
Package: extundelete
Version: 0.2.0-2
When I update the testing package list for i-386 (done today) and then
use aptitude to try to install extundelete I get the following
message:
David Lawyer
Reading package lists...
Building dependency tree...
Reading state information
tes at the
end or beginning of lines, it's useful.
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
don't understand why ncurses would cause
half of the alphabet to be eaten.
My $TERM variable is putty.
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: lynx-cur
Version: 2.8.8dev.8-1
Severity: normal
Using unicode utf-8 is broken. Looking a a Russian site which is
utf-8 results in about half of the Russian characters missing (and
replaced by escaped codes like ~B, ~D, etc. I use a utf-8
terminal (using the Putty program on a laptop) co
simple like it was before it was messed up with long UUIDs.
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Is this a bug in the software or documentation?
David Lawyer
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
On Fri, Dec 26, 2008 at 11:31:50AM +0100, Moritz Muehlenhoff wrote:
> On Fri, Apr 28, 2006 at 02:39:02PM -0700, David Lawyer wrote:
> > Package: linux-image-2.6.15-1-486
> > Version: 2.6.15-8_i386
> >
> > While booting version 2.6.15 on a Pentium 1, there is a long
ED]>
> Subject: Re: [Pkg-alsa-devel] Bug#439870: Bug#439870: Bug#439870: aplay
> fails to load my driver module snd-sb16
> To: David Lawyer <[EMAIL PROTECTED]>
> Cc: [EMAIL PROTECTED], [EMAIL PROTECTED]
>
> * Elimar Riesebieter [070916 22:30 +0200]
> > On Sat,
y not understand the meaning of this message which will make
them think something is wrong when it probably isn't.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
happy
> to reopen this bug report.
>
> Thanks.
>
> --
> Martin Michlmayr
> http://www.cyrius.com/
>
> Date: Wed, 23 Feb 2005 16:54:21 -0800
> From: David Lawyer <[EMAIL PROTECTED]>
> Subject: Parallel port too fast for old printer
> To: [EMAIL PROT
than it previously was due to the
workaround, but "most" still fails to utilize the full number of lines
on the terminal. So perhaps it's now only "wishlist" item. I suggest
that the scrolling region specified by the terminfo (type "infocmp" on
th
ition that happens if
the hardware is somewhat degraded in some way. Also, I've noticed a
long pause of a few seconds after this initramfs... message and think
that something wrong is going on at this point.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
lus parity) to 8 bits) and icanon becomes -icanon (one doesn't
need to type or to send a character to the program).
There could be other changes too, I didn't check.
I tried strace but since strace controls the terminal interface,
parity doesn't get disabled.
rity (It likely saved the
original settings and then restores them). The fix is to just not
to change the parity setting of the interface. It could be some program
that apt-get calls that is the culprit.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with
D]
>
> Command is behaving as expected, no documentation changes have been
> proposed.
Not so. I just tried it again and got the same results with coreutils
5.97.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
it
took a lot of needless effort to figure out what had happened,
including searching the Internet. It was also annoying when I needed
to use locate but couldn't since it was missing.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Since I wanted to finish installing my iceape-browser, I patched the
code myself and it seems to work OK. I just edited
/usr/sbin/update-iceape-chrome and replaced the two "ls"s with
"command ls".
David Lawyer
--
To UNSUBSCRIBE, email to [EMA
ut the color escapes (\033 is the escape
character).
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
7;t access startfile
--
This also happens for some other https connections, but not on all
https connections. Other browsers will connect to these sites.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTE
On Fri, Sep 14, 2007 at 08:04:13PM +0200, Elimar Riesebieter wrote:
> On Fri, 14 Sep 2007 the mental interface of
> David Lawyer told:
>
> > On Tue, Sep 11, 2007 at 06:18:21PM +0200, Elimar Riesebieter wrote:
> > > On Tue, 28 Aug 2007 the mental interface of
>
On Tue, Sep 11, 2007 at 06:18:21PM +0200, Elimar Riesebieter wrote:
> On Tue, 28 Aug 2007 the mental interface of
> Elimar Riesebieter told:
>
> > On Mon, 27 Aug 2007 the mental interface of
> > David Lawyer told:
> >
> > >Package:alsa-utils
> > >V
t load the sound modules until I'm ready to start sound and don't
want to auto-load them at boot time. I've only got 32 MB of memory
and aplay is supposed to load the modules by loading snd-sb16 which
then loads a lot more sound moudules per the dependency tree.
On Sun, Aug 05, 2007 at 05:37:42PM +0200, Elimar Riesebieter wrote:
> On Fri, 03 Aug 2007 the mental interface of
> David Lawyer told:
>
> > On Mon, Jul 30, 2007 at 08:17:26PM +0200, Elimar Riesebieter wrote:
> > > On Sun, 29 Jul 2007 the mental interface of
On Mon, Jul 30, 2007 at 08:17:26PM +0200, Elimar Riesebieter wrote:
> On Sun, 29 Jul 2007 the mental interface of
> David Lawyer told:
>
> > On Sun, Jul 29, 2007 at 05:00:53PM +0200, Elimar Riesebieter wrote:
> > > Hi David,
> > >
> > > On Tue, 24 Ju
ound works OK with *.wav files
(I've yet to get it to work with other formats and there are problems
with interrupt conflicts, etc. but that's another story for which I'll
file bug reports against the snd-sb16 module.)
David Lawyer
--
To UNSUBSCRIBE, email to
neric
scsi_mod 133644 1 libata
piix9476 0 [permanent]
generic 4868 0 [permanent]
ide_core 113316 3 ide_disk,piix,generic
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
hat the default
irq 5 is set it the card, overriding what may be set by jumpers.
If the driver has such limitations, they need to be either fixed or
documented.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
locate" command, it will not find it
since it's really named snd-sb16. This type of situation is true for
all modules that have - in their names.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Regarding changing the current package description of the linuxdoc-tools
package (David Lawyer suggested a shorter description).
On Tue, May 29, 2007 at 06:18:31PM +0200, Agustin Martin wrote:
> I have been looking at this, and since I agree that a shorter description is
> preferrable,
ne to mount proc).
So a fix is needed: either use noproc or have upgrades modify
/etc/fstab.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
be by default since I never asked to use a
plugin. But even if I can disable the plugin, it shouldn't behave
this way. I've installed the vim-runtime package so something in that
may be causing the problem.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
line, should have
> a similar effect.
I had the same thought. I hope that the -bou covers all cases of
overstiking. I think it does but ...
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>sequences unless explicitely desired. Thanks David Lawyer
>for the hint (closes: #175575, #419324).
You mean that -c is passed to grotty by default by passing "-P-c" to
groff.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with
en it can be readily read by a text editor like vim
and emacs. So I think that if you don't hear from Sano, it OK to go
with option 1.
> Since the overstrikes look nice in less and mc, I admit my personal
> preference goes to (1), but I am not alone here. Sano?
>
> Agustin
On Tue, Apr 17, 2007 at 06:47:14PM +0200, Agustin Martin wrote:
> Hi, David and Sano,
>
> On Sat, Apr 14, 2007 at 02:07:45PM -0700, David Lawyer wrote:
> > Package: linuxdoc-tools
> > Version 0.9.21-0.5
> >
> > Please merge bug 175575 into this bug report since
uot;-P-bcou". See "man grotty"
for how these 4 options (bcou) work together. To make this the
default, one could modify: /usr/share/linuxdoc-tools/dist/fmt_txt.pl
For example, this seems to work although I've never studied Perl:
create_temp("$global->{tmpbase}.tx
esg
output. Yet I don't see S1SUSPEND on hdd3 which is the SWSUSP_SIG
(sinature).
There is a document, swsusp, in the power directory of the kernel
documentation and it says that it's not good to use suspend if the ide
driver is a module (as it is with this pa
, use::checking,
> use::converting, works-with::text:docbook, works-with::text:sgml
ERROR: linuxdoc-tools doesn't work with text:docbook
Improvements: I think the above description is too long and should be
shortened. Let me know and I'll write you a shorter one. But the
most urgent
ure
of the computer (actually of the Pentium CPU) is little endian (least
significant byte first). But od is supposed to report byte values,
not word values.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Tue, Jun 06, 2006 at 01:18:54PM -0700, Debian Bug Tracking System wrote:
> The submitter address recorded for your Bug report
> #370790: Debian README for exim4 misleading re TLS.
> has been changed.
>
> The old submitter address for this report was
> David Lawyer <[EMA
Package:exim4-base
Version:4.60-3
My ISP started requiring TLS authentication so I checked the exim document
supplied by Debian: README.Debian.gz. It reads:
2.2. Using TLS
2.2.1. Exim 4 as TLS/SSL client
Both exim4-daemon-heavy and exim4-daemon-light support TLS/SSL using
the GnuTLS libr
---
(Then I stopped wvdial with ^C)
--> Terminating on signal 15
--> pppd: mote Name
--> Connect time 4.8 minutes.
--> pppd: mote Name
--> pppd: mote Name
--> Disconnecting at Sun May 28 11:40:45 2006
Caught signal #15! Att
include dialup
software such as wvdial.
David Lawyer
PS: Below is a text copy of the netinst page:
http://www.us.debian.org/distrib/netinst
[1]Debian Project
Select a
Package: linux-image-2.6.15-1-486
Version: 2.6.15-8_i386
While booting version 2.6.15 on a Pentium 1, there is a long pause
while the kernel probes ide0. There is no such pause in version
2.6.12. The kernel command line has: hda=none, hdb=none and ide0=none
so it should know there is no ide0 (mi
for kernel 2.2
I'm saying this because I filed a bug report similar to this one
against module-init-tools and it was rejected since it was claimed
that 2.2.20 is no longer supported. But lack of support shouldn't
mean introducing a bug into it, which has been done by the transition
from mo
ould check uname -r to find out I'm
running 2.2.20. I sometimes use kernel 2.2.20 since it loads about
3 times faster than 2.6.15 (but I hoping to improve 2.6.15 booting
speed by finding the causes of it's slowness on my PC).
David Lawyer
--
To UNSUBSCRIBE,
le cases where
the inetd program is missing. There's a couple of other bug reports
related to this problem. I don't know why my inetd is missing since
it's in the runlevel.conf file. Could netkit-inetd have removed it?
Perhaps I could download a copy of the inetd script from th
On Tue, Feb 28, 2006 at 03:12:06AM +0100, Adeodato Sim?? wrote:
> * David Lawyer [Mon, 20 Feb 2006 19:07:29 -0800]:
>
> Hi,
>
> > > I'm closing this bug, please write back if you need more information.
> > No. I went to the Debian website and couldn't
.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ot; or it is a
different version in "testing" from what is claimed by the package
list.
David Lawyer
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
but same problem.
Several other packages depend on this one and thus don't get
configured. I don't know how much lack of functionality my system has
as a result. Perhaps the old configuration still works on the new
software versions ??
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
the icewm bottom bar). Dillo works OK for
about 95% of websites I go to.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
n the Internet. If the adjust time utility
is working OK, it doesn't need to be set often since systematic drift
of the hw clock is automatically compensated for.
So there needs to be a documented option of using the adjust utility
and a variable in the script to set or comment out if one wants to us
give the error message: ... ERROR EOF in string
`$ `%
`` ^^
`% "^
`ab %"
Using a number of pairs (non alpha-numberic) without any ` worked OK.
PS: I wrote the above years ago but don't think I submitted it.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
nged these
stty settings.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
utput with neither
escape sequences for dumb electronic terminals nor overstrikes for
hard-copy terminals (which are now museum pieces)? So perhaps the fix
is for someone to patch groff instead of linuxdoc.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
solutions.
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
t; --
> Craig Small GnuPG:1C1B D893 1418 2AF4 45EE 95CB C76C E5AC 12CA DFA5
> Eye-Net Consulting http://www.enc.com.au/ MIEE Debian developer
> csmall at : enc.com.au ieee.org debian.org
>
>
David Lawyer
--
T
reload)
echo "Reloading $NAME configuration files"
# regenerate exim4.conf
upex4conf
isconfigvalid
reload_exim
;;
status)
exiwhat
;;
*)
echo "Usage: $0 {start|stop|restart|reload|status}"
exit 1
;;
esac
exit 0
# vim:tabstop=2:expandtab:shiftwidth=2
David Lawyer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
version=2.60-bugs.debian.org_2005_01_02
> X-Spam-Level:
>
> procps 3.1.14 probably fixes this, no further notification from
> submitter.
> --
> Craig Small GnuPG:1C1B D893 1418 2AF4 45EE 95CB C76C E5AC 12CA DFA5
> Eye-Net Consulting http://www.enc.com.au/ MIE
1 - 100 of 109 matches
Mail list logo
