Package: knetworkconf
Version: 4:4.2.2-1
Severity: normal
Same XML file could not be parsed error
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-rc6 (SMP w/2 CPU co
Sorry Eugene - I forgot to reply to all.
Here is the output
da...@debian:~$ cupt
Can't locate Locale/gettext.pm in @INC (@INC contains: ./ /etc/perl
/usr/local/lib/perl/5.10.0 /usr/local/share/perl/5.10.0 /usr/lib/perl5
/usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10
/usr/local/lib/site_
Package: cupt
Version: 0.1.1.1
Severity: grave
Justification: renders package unusable
Needs to require liblocale-gettext-perl otherwise package fails to run
complaining about perl gettext errors.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'uns
aptitude full-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
The following packages are BROKEN:
libgnokii3
The following packages will be upgraded:
gnokii-common
1 packages u
You need to upgrade x11-common first and then install xorg.
I have the same problem on 64 bit.
This is frustrating because using the nvidia installer works with this xorg.
I get the exact same error (same package and version and arch)
David
Package: disk-manager
Version: 1.0.1-1
Severity: serious
--- Please enter the report below this line. ---
debian:/home/david# /usr/sbin/disk-manager-root
/var/lib/python-support/python2.5/pygtk.py: inconsistent use of tabs and
spaces in indentation
Traceback (most recent call last):
Package: kdmtheme
Version: 1.2-1
--- Please enter the report below this line. ---
I wonder if this is more of a bug against kdm?
--- System information. ---
Architecture: amd64
Kernel: Linux 2.6.24-rc2
Debian Release: lenny/sid
500 unstableftp.debian.org
1 experimentalf
.
***
Subject: Re: Bug#429423: libc reports wrong version
Date: Monday 18 June 2007
From: Clint Adams <[EMAIL PROTECTED]>
To: David Broome <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
On Sun, Jun 17, 2007 at 06:06:19PM -0500, David Broome wrote:
> --- Please enter the report
Package: libc6
Version: 2.6-0exp3
Severity: grave
--- Please enter the report below this line. ---
When I create a deb using either make-pkg (for kernels) or dh_make for
invidulal debs , the wrong version of libc is detected always.
linux-headers-2.6.22-rc4-2 depends on libc6 (>= 2.6-1); howev
I just compiled another program - this is a libc error not a kernel package
error.
Let me know if you want to close this our re-assign it.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: kernel-package
Version: 11.001
Severity: grave
make-kpkg builds linux-headers with wrong dependency. It builds the image
fine.
Command used to build kernel
fakeroot make-kpkg --initrd --append-to-version=-2 kernel_image kernel_headers
Build was successful.
libc version is 2.6-0exp2
I am using unstable and the bug is not reproducible.
It can be closed right away.
I have a folder that I keep track of any bugs I file now so as not to forget
them like this one. Sorry for the lack of follow up.
David
On Monday 28 May 2007 11:34:45 am Brice Goglin wrote:
> Hi,
>
> About 6 mon
I noticed after opening this that bug 418483 has been filed against libk3b3
about 5 minutes before.
I read both and mine contributes nothing new so this can be closed as a
duplicate.
Thanks,
David
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contac
Package: k3b
Version: 1.0-1
Severity: critical
--- Please enter the report below this line. ---
K3b 1.0-1 pulls in libk3b3 but does not remove libk3b2. This causes the
program not to launch.
Once that libk3b2 is removed, it works great.
--- System information. ---
Architecture: amd64
Kernel:
Package: reportbug-ng
Version: 0.2007.03.10
Severity: wishlist
This is a qt program, yet there are no qt email clients to choose from.
Please add kmail.
Look like a friendly package though.
-- System Information:
Debian Release: 4.0
APT prefers experimental
APT policy: (950, 'experimental'
is 2006d.
ftp://munnari.oz.au/pub/oldtz/tzdata2006d.tar.gz
The current tzdata is 2007a
ftp://elsie.nci.nih.gov/pub/
Dave,
--
David Broome Programmer-Analyst.FineArts.UVic.CA /BSc /CNA /MCP
250.721-6307 [EMAIL PROTECTED]FIA 221
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
wi
is 2006d.
ftp://munnari.oz.au/pub/oldtz/tzdata2006d.tar.gz
The current tzdata is 2007a
ftp://elsie.nci.nih.gov/pub/
~d
--
David Broome Programmer-Analyst.FineArts.UVic.CA /BSc /CNA /MCP
250.721-6307 [EMAIL PROTECTED]FIA 221
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
wi
ed
> thanks
>
> * 2006-12-19 03:26, David Broome wrote:
> > Package: gtkdialog
> > Version: 2:0.7.9-1
> > Severity: grave
> > Justification: renders package unusable
> >
> > When I try to run it I get:
> >
> > ** ERROR **: GtkDialog: Could not find
Package: gtkdialog
Version: 2:0.7.9-1
Severity: grave
Justification: renders package unusable
When I try to run it I get:
** ERROR **: GtkDialog: Could not find the dialog description in the
environment variable 'MAIN_DIALOG'.
aborting...
Aborted
-- System Information:
Debian Release: 4.0
A
I just tried the patch and it works great.
Thanks!
David
Today Pablo Chinea wrote
Hello, I sent the new patch to the official maintainer of the
package last month, but it seems he could not have released it yet.
I've attached the new version of the patch here.
Greetings,
--
Pablo Chi
This package still works with the testing version, but the package itself
resides in unstable so it would seem that the package would support that
distrubution.
Also, deleting the pre-removal script was easier than downgrading. I don't
know why I didn't try that sooner.
--
To UNSUBSCRIBE, e
Package: sysv-rc-bootsplash
Version: 1.0.4-1
Severity: grave
Justification: renders package unusable
When I try to install I get this error
Preconfiguring packages ...
Selecting previously deselected package sysv-rc-bootsplash.
(Reading database ... 109388 files and directories currently installed
nder_
host_address/[EMAIL PROTECTED]":
"s
ender_host_address/24" is not an IP address
Dave,
--
David Broome Sr. Programmer Analyst @ FineArts.UVic.CA /BSc
250.721-6307 [EMAIL PROTECTED] FIA 221
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject o
Package: x11-common
Version: 1:7.1.0-6
Severity: important
This error occurs when trying to spawn a new x-session from within a
open x-session.
It works fine as root.
I can verify that this package is the cuprit because downgrading to
1:7.1.0-5 fixed the problem.
The full output is
Fatal ser
find is to manually remove the entry from
dpkg /var/lib/dpkg/status and also to manually remove any config files (it
looks like it get them in any case.)
--
David Broome
On Debian Linux Sid using KMail
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe"
When I run kcmshell displayconfig I get a message that says (I wish it let me cut and past :) )
The module Display could not be loaded.
The diagnostics is:
Possible reasons:
* An error occurred during your last KDE upgrade leaving an orphaned control module
* You have old third party modul
Just to add, the other modules work fine.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
"Hi!
This is a general ping to all cdrkit (former cdrtools) related bugs. Please
test if your reported bug still applies with the new wodim burning program
and/or newest mkisofs/cdda2wav/...
If there is no response in 4 weeks, the bug reports will be closed."
As far as this specific bug who kn
Package: kde-guidance
Version: 0.6.7-3
Severity: grave
Justification: renders package unusable
When I run it in the console I get this:
Pythonize constructor -- pid = 4958
Traceback (most recent call last):
File "", line 8, in kcontrol_bridge_create_displayconfig
File "/var/lib/python-support/
I applied the patched and replaced the script.
It works but two observations:
The progress bar during boot does not start until after the kernel part is
done (which makes sense since it is an init script) Once it comes on it
works very well.
During shutdown it hits the halfway mark then start
This is a stupid question, but how would I use this?
I guess I would replace the splash script in /sbin with yours. That part is
simple enough.
How do I patch sysv-rc?
Thanks!
On 8/29/06, Pablo Chinea <[EMAIL PROTECTED]> wrote:
Hello, the idea of putting an alernative to the usplash scri
MR> That's probably because sysv-rc 2.86.ds1-15 is what we have in Etch, but
MR> the above package only works for 2.86.ds1-14.1.
I tried downgrading to that version but I got the exact same error as the
other person
Is there a work around for now?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTE
I was wrong. The hack does work. The problem still exists but this solves it
for my system.
-- Forwarded Message --
Subject: Re: Bug#362078: xserver-xorg: dpkg-reconfigure doesn't work if the
xorg.conf has been customized
Date: Sunday 30 July 2006 12:23 pm
From:
Just to verify - this problem still exists. and the "fix" mentioned does not
work. It only gets rid of the error message but still creates no new
xorg.conf file.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
version 0.6.7-3 installs perfectly. Let me know if you need any informatiom
from me but as far as I am concered it is fixed.
Thanks
On Monday 26 June 2006 2:34 am, Fathi Boudra wrote:
> hi,
>
> guidance needs to use python 2.4.
>
> now that the new debian python infrastructure is stabilized, i
This version still requires apt-index-watcher in order to open otherwise you
still get the error about not being able to open the source list.
apt-index-watcher is not listed as a dependency.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL
It is not and we are at version 2.6.17-2.
Does this need to be filed against the unstable versions?
Any news about this bug? Now that Linux 2.6.17 is in unstable, this
better be fixed.
Thanks,
Johannes
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble?
Package: kde-guidance
Version: 0.6.7-1
Severity: grave
Justification: renders package unusable
Unpacking kde-guidance (from .../kde-guidance_0.6.7-1_amd64.deb) ...
Setting up kde-guidance (0.6.7-1) ...
Compiling /usr/lib/python2.3/site-packages/displayconfigabstraction.py ...
File "/usr/lib/pyth
That missing depency hit unstable today. Thanks!!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: python-kde3
Severity: normal
Depends: python2.3-kde3 but it is not installable
python2.3-kde3 is not available on amd64
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: a
Package: linux-headers-2.6.17-rc3-amd64-k8
Severity: grave
Justification: renders package unusable
This actually effects all the linux-header files for 2.6.17 except the
base one linux-headers-2.6.17-rc3
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy
43 matches
Mail list logo
