_maps =
$smtp_sasl_auth_cache_name
$lmtp_sasl_auth_cache_name
$address_verify_map
'proxy_write_maps' had the first two entries by default, and I manually added
the third to permit read/write access to that proxy map.
Regards,
Daniel
--
✣ Daniel Pittman✉ dan.
the
>> mapfile change.
>
> Yes, I have installed 3.1.4 from sid and it fixes the bug. Thank you
> for taking care of this.
I can confirm this also resolves my problem with mdadm spinning forever.
Thank you all,
Daniel
--
✣ Daniel Pittman✉ dan...@rimspace.
Eduard Bloch writes:
> * Daniel Pittman [Thu, Aug 19 2010, 06:28:01PM]:
>> Eduard Bloch writes:
G'day Eduard. Sorry for the long delay in responding to this bug report, and
your changes. I regret holding up so long on that.
[...]
>> > I found a couple of issues which
a (malloc, mmap) rw- 1019932
RO data r-- 0
Unreadable--- 131352
Unknown0
I attached the code for proc-maps, but it basically just sums memory
allocations. On the same hunch /proc/.../maps and /proc/.../smaps are bot
Daniel Pittman writes:
> We use apt-cacher-ng in the office to reduce the cost of updates, for which
> it works great. However, after moving from an Etch machine to a Lenny
> machine running apt-cacher-ng we hit trouble with memory exhaustion.
[...]
> It turns out that the trouble
vz-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
--
✣ Daniel Pittman✉ dan...@rimspace.net☎ +61 401 155 707
♽ made with 100 percent post-consumer electrons
--
To UNSUBSCR
ebase-workspace-bin 4:4.4.4-1 core binaries for the KDE 4 base w
-- no debconf information
--
✣ Daniel Pittman✉ dan...@rimspace.net☎ +61 401 155 707
♽ made with 100 percent post-consumer electrons
--
To UNSUBSCRIBE, email to debian-bugs-dist-re
ail] Error 2
I have attached the entire build log, compressed, for reference against your
need to see it.
The previous -3 package worked fine, obviously. :)
Daniel
--
✣ Daniel Pittman✉ dan...@rimspace.net☎ +61 401 155 707
♽ made with 100 percent pos
ities
Versions of packages udev recommends:
ii pciutils 1:3.1.4-1 Linux PCI Utilities
ii usbutils 0.86-2 Linux USB utilities
udev suggests no packages.
-- debconf information:
udev/new_kernel_needed: false
udev/reboot_needed:
--
✣ Daniel Pitt
o Volume Control
ii pavumeter 0.9.3-1PulseAudio Volume Meter
ii pulseaudio-utils 0.9.18-1 Command line tools for the PulseAu
-- no debconf information
--
✣ Daniel Pittman✉ dan...@rimspace.net☎ +61 401 155 707
♽ made with 100 p
Guillem Jover writes:
> On Thu, 2009-09-24 at 13:27:52 +0100, Colin Watson wrote:
>> On Tue, Sep 15, 2009 at 11:05:16AM +1000, Daniel Pittman wrote:
>> > G'day. I don't know if this is correctly a man-db bug, or a dpkg bug:
>> >
>> > Since man-db ha
Timo Sirainen writes:
> On Sep 15, 2009, at 9:10 AM, Daniel Pittman wrote:
>
>> Sep 15 16:03:31 krosp IMAP(daniel): : Fatal: io_loop_handle_add:
>> epoll_ctl(1, 0): Operation not permitted
Sorry to take so long to follow up on this.
> Do you have rawlog enabled? IIRC that
ries
ii libssl0.9.8 0.9.8k-5 SSL shared libraries
dovecot-imapd recommends no packages.
dovecot-imapd suggests no packages.
-- no debconf information
--
✣ Daniel Pittman✉ dan...@rimspace.net☎ +61 401 155 707
♽ made with 100 percent pos
ries
ii libssl0.9.8 0.9.8k-5 SSL shared libraries
dovecot-imapd recommends no packages.
dovecot-imapd suggests no packages.
-- no debconf information
--
✣ Daniel Pittman✉ dan...@rimspace.net☎ +61 401 155 707
♽ made with 100 percent pos
f information:
man-db/build-database: true
man-db/rebuild-database: true
* man-db/install-setuid: false
--
✣ Daniel Pittman✉ dan...@rimspace.net☎ +61 401 155 707
♽ made with 100 percent post-consumer electrons
Looking for work? Love Perl? In Melbo
ackages.
-- no debconf information
--
✣ Daniel Pittman✉ dan...@rimspace.net☎ +61 401 155 707
♽ made with 100 percent post-consumer electrons
Looking for work? Love Perl? In Melbourne, Australia? We are hiring.
90-local-alsa-mixer
Description: Binary data
Sven Joachim writes:
> On 2009-08-22 03:06 +0200, Daniel Pittman wrote:
>
>> Package: nvidia-kernel-source
>> Version: 185.18.31-1
>> Severity: grave
>>
>> After upgrading to the 185.18.31 packages from 185.18.14, X caused a kernel
>> panic with a NULL
8.14-2 NVIDIA binary Xorg driver
nvidia-kernel-source suggests no packages.
-- no debconf information
--
✣ Daniel Pittman✉ dan...@rimspace.net☎ +61 401 155 707
♽ made with 100 percent post-consumer electrons
Looking for work? Love Perl? In Melbourne
1:3.2.8-1 /proc file system utilities
Versions of packages postgresql-common recommends:
ii ssl-cert 1.0.23 simple debconf wrapper for OpenSSL
postgresql-common suggests no packages.
-- debconf information:
* postgresql-common/obsolete-major:
--
G'day.
The problem I reported here is resolved in the 23.1+1-2 package.
Regards,
Daniel
--
✣ Daniel Pittman✉ dan...@rimspace.net☎ +61 401 155 707
♽ made with 100 percent post-consumer electrons
Looking for work? Love Perl? In Melb
etckeeper depends on:
ii debconf [debc 1.5.11etch2Debian configuration management sy
ii git-core 1:1.5.6.5-3+lenny2~bpo40+1 fast, scalable, distributed revisi
etckeeper recommends no packages.
-- debconf information:
etckeeper/commit_failed:
--
✣ Daniel Pittman
lient libra
ii zlib1g 1:1.2.3.3.dfsg-14 compression library - runtime
emacs23-gtk recommends no packages.
Versions of packages emacs23-gtk suggests:
ii emacs23-common-non-dfsg 23.1+1-1 GNU Emacs shared, architecture ind
-- no debconf information
--
✣ Daniel Pittm
I have also encountered the same issue after restarting KDM today. I suspect
the NVIDIA binary driver is to blame, as it is very slow to start up.
To resolve the problem I set in /etc/kde4/kdm/kdmrc:
[X-*-Core]
ServerTimeout=120
That gives the server time to start up even though the NVI
Package: lxc
Version: 0.6.2-1
Severity: wishlist
The example lxc scripts (/usr/share/doc/lxc/examples/lxc-{debian,fedora}) that
create full distribution images depend on the cgroup features, and the error
messages if they are not enabled are not exactly helpful.
It would be good to document, prob
Package: libplist-utils
Version: 0.12-1
Severity: grave
Justification: renders package unusable
libplist-utils ships /usr/bin/plist as a symbolic link, but not the actual
binary:
] ls -l /usr/bin/plutil*
lrwxrwxrwx 1 root root 11 2009-05-31 16:22 /usr/bin/plutil -> plutil-0.12
It should probabl
Package: magit
Version: 0.7-1
Severity: important
The magit package expects the 'emacsclient' binary to live inside the
`exec-directory' path, and communicates this forcibly to git:
magit.el line 2892 (function magit-interactive-rebase)
(setenv "GIT_EDITOR" (expand-file-name "emacsclient" exe
Guido Günther writes:
> On Mon, May 04, 2009 at 12:34:28PM +1000, Daniel Pittman wrote:
>> Guido Günther writes:
>> > On Sun, May 03, 2009 at 11:29:46AM +1000, Daniel Pittman wrote:
>> >> Now that the Linux Containers (lxc) package has made it into unstable, it
Package: pulseaudio
Version: 0.9.15-1
Severity: normal
In my logs I get a half dozen or so instances of this every day:
May 4 17:35:01 krosp pulseaudio[7702]: module-console-kit.c: GetUnixUser()
call failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetUnixUser"
with signature "" on in
Guido Günther writes:
> On Sun, May 03, 2009 at 11:29:46AM +1000, Daniel Pittman wrote:
>> Now that the Linux Containers (lxc) package has made it into unstable, it
>> would be really great if libvirt was built with support for them; the current
>> and next versions bo
Guido Günther writes:
> On Sun, May 03, 2009 at 11:29:46AM +1000, Daniel Pittman wrote:
>
>> Now that the Linux Containers (lxc) package has made it into unstable, it
>> would be really great if libvirt was built with support for them; the current
>> and next versions
Package: libvirt0
Version: 0.6.2-2
Severity: wishlist
File: libvirt
G'day.
Now that the Linux Containers (lxc) package has made it into unstable, it
would be really great if libvirt was built with support for them; the current
and next versions both support using them.
It would also be kind of n
ow...@bugs.debian.org (Debian Bug Tracking System) writes:
> I'm tentatively closing this bug report now, in several parts because:
>
> - I cannot reproduce it.
> - I've seen no further information presented that would enable upstream
>to try to reproduce it.
> - We now have xorg 1.6 in uns
G'day.
After an upgrade my network devices were also bumped up from eth0 and
wlan0 to eth1 and wlan1. The symptoms, and the history, are identical
to that of Matthias Heinz, in message #25[1].
Previously the system matched on the NIC address, afterwards on a good
many more features.
Regards,
Package: yakuake
Version: 2.9.4-1
Severity: normal
yakuake leads file descriptors to child processes; Run from the child shell of
a yakuake session I can see:
] ls -l /proc/$$/fd/
total 0
lrwx-- 1 daniel daniel 64 2009-03-23 13:39 0 -> /dev/pts/3
lrwx-- 1 daniel daniel 64 2009-03-23 13:39
Package: xserver-xorg-input-wacom
Version: 0.8.1.6-1
Severity: important
The Wacom stylus works only very briefly in relative mode, in that it
initially responds, but shortly stops moving and will no longer react in any
particular fashion.
Setting it back to absolute mode works correctly, and it
Package: sudo
Version: 1.6.9p17-2
Severity: normal
File: /etc/pam.d/sudo
The shipped sudo pam configuration has some hand-coded session support, but
doesn't actually use the standard /etc/pam.d/common-session infrastructure:
,[ /etc/pam.d/sudo ]
| #%PAM-1.0
|
| @include common-auth
| @includ
Package: okular
Version: 4:4.2.1-1
Severity: normal
File: /usr/bin/okular
When viewing this PDF file, okular crashes:
http://www.sans.org/rr/whitepapers/vpns/1459.php
Yes, that is a PDF file, after a redirect, and downloading it and opening the
local file doesn't help.
The backtrace is:
Program
Package: libpam-runtime
Version: 1.0.1-7
Severity: normal
File: /usr/sbin/pam-auth-update
While writing the 'namespace' pam-auth-update configuration file Emacs created
/usr/share/pam-config/namespace~ as a backup file. The file 'namespaces~'
also existed (note the extra 's') in the configuration
Package: libpam-runtime
Version: 1.0.1-7
Severity: wishlist
File: /usr/sbin/pam-auth-update
Tags: patch
It would be good to allow the pam_namespace.so module to be enabled in
pam-auth-update through the core package; I use this to support mounting a
tmpfs for a "guest" account, but it can be used
Package: libpam-modules
Version: 1.0.1-7
Severity: normal
libpam-modules ships with the pam_namespace module to automatically create and
mount per-user or per-context directories in a detached namespace.
This includes a script, /etc/security/namespace.init, that attempts to
populate an automatica
Package: libpar-packer-perl
Version: 0.982-2
Severity: grave
File: /usr/bin/pp
Justification: renders package unusable
G'day.
After y'all resolved #451600 by renaming /usr/bin/par.pl to /usr/bin/par-archive
the pp process for generating stand-alone Perl scripts is broken:
] pp -P -e '1;'
Can't o
G'day.
Y'all recently fixed this bug by providing a stub to allow "require
xmlsimple" to work as expected.
This causes these warnings with puppet:
/usr/lib/ruby/1.8/xmlsimple.rb:275: warning: already initialized constant
KNOWN_OPTIONS
/usr/lib/ruby/1.8/xmlsimple.rb:280: warning: already initial
Package: pulseaudio
Version: 0.9.13-2
Severity: important
(this refers to the pulseaudio and KDE 4.2 packages from experimental)
PulseAudio ships /etc/xdg/autostart/pulseaudio.desktop to automatically start
the PulseAudio user server when a desktop environment such as KDE starts
running.
Under K
Package: pulseaudio
Version: 0.9.13-2
Severity: important
(this refers to the version of pulseaudio in experimental)
The script /usr/bin/start-pulseaudio-x11 is designed to start PulseAudio under
an X
session, and is invoked with an xdg startup item among other things. This,
sadly,
doesn't act
Ola Lundqvist writes:
> If you could try this fix out it would be really great.
> A built package for amd64 is available at:
> http://apt.inguza.org/vzctl/
Ah. I am on amd64, and that is an i386 package without source.
Anyway, I grabbed the source, manually applied the patch and downgraded
the
Package: linux-image-2.6.26-1-openvz-amd64
Version: 2.6.26-13
Severity: important
G'day. I am running KDE42 from experimental, and am experiencing problems with
several
of their processes hanging in uninterruptable sleep. This generally doesn't
seem to
cause any kernel messages, but on one oc
Kir Kolyshkin writes:
> This is caused by newer kernel headers (in this case on a build system
> that was used to build this vzctl package), and is fixed in
> vzctl-3.0.23. See the following git commit:
vzctl 3.0.23-2 is available in experimental, so I have installed it and
tested it on my machi
Package: libqt4-ruby1.8
Version: 4:4.2.0-1
Severity: normal
Both libqt0-ruby1.8 and libqt4-ruby1.8 contain the same file:
Unpacking libqt4-ruby1.8 (from .../libqt4-ruby1.8_4%3a4.2.0-1_amd64.deb) ...
dpkg: error processing
/var/cache/apt/archives/libqt4-ruby1.8_4%3a4.2.0-1_amd64.deb (--unpack):
Package: vzctl
Version: 3.0.22-14
Severity: grave
Justification: renders package unusable
When trying to start a VE I get the following output:
] sudo vzctl start sd-dev
Starting VE ...
VE is mounted
Unable to set capability: Operation not permitted
Unable to set capability
VE start failed
VE is
Package: cyrus-imapd-2.2
Version: 2.2.13-10
Severity: important
I was testing the Zimbra Desktop IMAP client against my Cyrus server and
found what I thought to be a bug in that client. On further
investigation I believe this is a bug in the Cyrus IMAPD component; the
following is from the origin
Ove Kaaven <[EMAIL PROTECTED]> writes:
> Daniel Pittman skrev:
>> Package: wine
>> Version: 0.0.20030813-1
>> Severity: normal
>>
>> With the latest upgrade to the Wine package, Lotus Notes hangs resolving
>> a the hostname of the server.
>>
>&
Package: subversion
Version: 1.2.3dfsg1-3
Severity: grave
G'day.
I have run into a problem where I can't commit a change to my subversion
repository via HTTP/SSL.
The problem seems identical to the one described in this bug report, but
my issues continue despite running the version that claims t
Kyle McMartin <[EMAIL PROTECTED]> writes:
> Sorry for taking so long to get back to you, finally clearing
> out a bunch of the bugs on the package.
Nah, no problem.
> On Sun, Apr 10, 2005 at 10:50:22PM +1000, Daniel Pittman wrote:
>> I almost never use the wireless interf
Package: python2.3
Version: 2.3.5-7
Severity: normal
Note: this is a problem in stable as well as unstable, and it would be
great to get it fixed in both places.
Using urllib2, digest HTTP authentication against some servers (notably,
www.livejournal.com) will fail. This is caused by a server i
Stephen Gran <[EMAIL PROTECTED]> writes:
> This one time, at band camp, Daniel Pittman said:
>> Oh, sorry, I must have missed that request: 'eth0 wlan0'
>
> Thanks, I figured as much, but it's nice to be sure.
>
>> Honestly, I was mostly surprised
Stephen Gran <[EMAIL PROTECTED]> writes:
> This one time, at band camp, Stephen Gran said:
>> This one time, at band camp, Daniel Pittman said:
>> > When I bring down the wlan0 interface on my machine, freshclam is
>> > stopped. This happens even if I had a
Package: clamav-freshclam
Version: 0.86.1-2
Severity: normal
When I bring down the wlan0 interface on my machine, freshclam is
stopped. This happens even if I had a working connection on eth0, which
was up the whole time.
This isn't nice, because it can result in database updates stopping
unexpe
Package: libcatalyst-perl
Version: 5.30-2
Severity: wishlist
Thanks for packaging catalyst - it is a wonderful framework.
I think the package should probably suggest, or even recommend, the
libtest-pod-coverage-perl package as well, since some of the generated
tests depend on that.
It obviously
Package: squid
Version: 2.5.9-4
Severity: serious
This applies to 2.5.9-5 - I downgraded to be able to check for duplicate
bug reports.
I get this assertion failure, and abort:
assertion failed: store_swapout.c:232: "mem->inmem_lo == 0"
Regards,
Daniel
-- System Information:
Debian Rel
Package: wpasupplicant
Version: 0.3.8-1
Severity: wishlist
I almost never use the wireless interface in my laptop, but when I do I
need WPA support, so I have wpa_supplicant configured deal with that for
me.
This is great, but I don't really want it to start at boot time, since
normally that woul
Package: squid
Version: 2.5.9-2
Severity: grave
After upgrading to 2.5.9-3, squid would routinely fail with this
assertion:
2005/04/02 12:01:48| assertion failed: stmem.c:93: "current_offset ==
target_offset"
The process seemed to restart automatically, and perform an DIRTY cache
rebuild.
I ha
Package: nagios-plugins
Severity: important
The 'check_mailq' plugin depends on utils.pm, which defines
'$PATH_TO_MAILQ', to find the mailq binary to run.
Unfortunately, as shipped this file defines it as "", resulting in
check_mailq trying to do -x "", and failing as a result.
This patch correc
Package: munin-node
Version: 1.2.0-1
Severity: normal
The 'amavis' plugin supplied with munin looks in the wrong place for the
mail log file, at least with the standard Debian syslog configuration.
Worse, there isn't a simple way to override it from the munin
configuration, like there are with ma
63 matches
Mail list logo
