Hi,
> when I install the package, the file apache.conf is not in place in
> /etc/adminer/.
Why would you expect that? I could not find any documentation pointing
to this location.
A basic apache configuration for adminer is available at the following location.
/etc/apache2/conf-available/adminer.
Package: src:linux
Version: 5.3.7-1
Severity: normal
Tags: patch upstream
Whole machine hangs, but recovers after a few seconds; no visible
association to CPU or memory load.
Please include the patch from
https://patchwork.freedesktop.org/patch/300891/
it claims to fix a bug that is repor
Hi again
The new patch can be found here:
http://apt.inguza.net/wheezy-security/cpio/CVE-2019-14866.patch
It is not perfectly properly documented since it refers to a commit that do
not contain it all. But I think you get the point anyway.
// Ola
On Mon, 4 Nov 2019 at 08:10, Ola Lundqvist wrot
Package: src:python-apt
Version: 1.9.0
Severity: important
Tags: sid bullseye
User: debian-pyt...@lists.debian.org
Usertags: python3.8
you can work around them with the allow-stderr restriction, however these should
be fixed.
autopkgtest [06:10:11]: test run-tests: ---]
run
Hi Sergey, Thomas and cpio Debian maintainers
I have been preparing fixes for CVE-2019-14866 for Debian oldstable and
oldoldstable. While doing that I realized that the patch mentioned here (1)
do work for amd64 but do not work for i386.
I was able to build on both amd64 and i386 but the fix obvio
Package: cmake
Version: 3.13.4-1
Severity: wishlist
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Dear maintainer.
The CMake v3.15 series is avaliable, while currently, sid is at 3.13.
LLVM is considering requiring said 3.15 in the near future:
https://lists.llvm.org/pipermail/llvm-dev/2019-Oct
On 11/3/19 4:56 PM, tony mancill wrote:
> Perhaps @NTPSEC_VERSION_EXTENDED@ is not getting set properly in all of
> the modules at build time? (It's probably something simple; I haven't
> looked yet.)
Thanks for the bug report. I found and fixed this. It'll be in the next
upload, which should be
Package: lintian
Severity: wishlist
Control: retitle -1 lintian: check ISA used in binaries
On Mon, Nov 4, 2019 at 5:18 AM Adam Borowski wrote:
>
> On Sun, Nov 03, 2019 at 04:27:12PM +, Mo Zhou wrote:
> > Hi mentors,
> >
> > do you know if there is a static ELF analysing tool, that makes
> >
Source: x2goserver
Version: 4.1.0.3-4
Tags: patch
User: debian-cr...@lists.debian.org
Usertags: ftcbfs
x2goserver fails to cross build from source, because it uses the build
architecture compiler. During dh_auto_configure, the Makefile.PL is run,
but it doesn't seem to record cross tools for the b
> ...the one who mounts the filesystem need to be sure
> s/he doesn't shadow real files / directories with the mount.
No, this is a very unsafe default because benign `mount -av` will create more
layered mounts on every invocation.
Mount should be idempotent by default.
> This is the same with
On Sun, Nov 03, 2019 at 11:09:00AM -0800, Darrick J. Wong wrote:
>
> Because if you don't do that, the e2scrub process gets started with fd 0
> mapped to stdout of ls_targets on account of the "ls_targets | while
> read tgt" loop. Yay bash. I guess the problem here is that
> e2scrub_all's stdin
Hi Emfox,
On Mon, Nov 04, 2019 at 09:13:33AM +0800, Emfox Zhou wrote:
> Hello, have you put your packaging work online anywhere, so that people
> interested can help checking it?
Thanks for your kind reply.
I just worked out a manual page for mkfs.erofs since I noticed it's a
requirement for a d
Package: wnpp
Severity: wishlist
X-Debbugs-CC: debian-de...@lists.debian.org d...@fragfest.com.au
Owner: Dmitry Smirnov
Package name: crun
Version: 0.10.4
Upstream Author: Giuseppe Scrivano
License: (L)GPL-3+
URL: https://github.com/containers/crun
Vcs-Browser:
Oops!!! Sorry, I reverted the change
Cheers,
Arias Emmanuel
@eamanu
http://eamanu.com
El dom., 3 de nov. de 2019 a la(s) 19:49, Drew Parsons
(dpars...@debian.org) escribió:
>
> On 2019-11-04 01:15, Emmanuel Arias wrote:
> > Hi,
> >
> > I've just prepare the new upstream release (for some reason
>
On 2019-11-02 07:01:43, Mike Gabriel wrote:
> Hi Antoine,
>
> On Sa 02 Nov 2019 00:10:38 CET, anarcat wrote:
>
>> Control: tags 942114 + pending
>>
>> Dear maintainer,
>>
>> I've prepared an NMU for ganeti-instance-debootstrap (versioned as
>> 0.16-6.1) and
>> uploaded it to DELAYED/02. Please f
Hello, have you put your packaging work online anywhere, so that people
interested can help checking it?
And if the issues is critical, I am afraid we should not upload erofs-utils
until lz4 is fixed.
On Fri, Nov 1, 2019 at 9:33 PM Gao Xiang wrote:
> Package: wnpp
> Severity: wishlist
> Owner: G
On Monday, 4 November 2019 8:03:14 AM AEDT Paul Gevers wrote:
> Do you mean autodep8 here? I don't see how autopkgtest could be to
> blame, but please enlighten me.
I don't know either but I suspect whatever is being tested for Golang
packages per "autopkgtest-pkg-go" may have a bug responsible f
On Monday, 4 November 2019 5:12:57 AM AEDT Andrei POPESCU wrote:
> s/SystemD/systemd :)
Yes, yes, thank you. Lintian slapped me for this already. :)
Already fixed in
https://salsa.debian.org/debian/docker-systemctl-replacement/commit/3f7b7bd9
--
Cheers,
Dmitry Smirnov.
---
We are all equ
Package: wnpp
Severity: wishlist
Owner: Andy Li
* Package name: ocaml-uchar
Version : 0.0.2
Upstream Author : Daniel Bünzli
* URL : https://github.com/ocaml/uchar
* License : LGPL with OCaml-linking exception
Programming Lang: OCaml
Description : Compa
[2019-11-02 20:03] Clint Adams
> > FTBFS on macOS systems, because of undefined O_TMPFILE,
> > which was introduced in 4.9 release.
> >
> > Attempt to build was made here:
> > https://github.com/Homebrew/homebrew-core/pull/46107
>
> Dmitry, any thoughts? Maybe disabling --stdin on systems wit
Am 03.11.19 um 23:51 schrieb Toni Mueller:
>
> Hi Michael,
>
> On Sun, Nov 03, 2019 at 11:45:07PM +0100, Michael Biebl wrote:
>> Am 03.11.19 um 23:28 schrieb Toni Mueller:
>>> I have tried two versions that don't work. Switching window managers is
>>> not an option for me, and generally, it shoul
Am 04.11.19 um 00:11 schrieb Michael Biebl:
> Am 03.11.19 um 23:51 schrieb Toni Mueller:
>> Now what...
>
> I'd talk to the awesome maintainer and/or Qt5 maintainers.
>
> I'm not really familiar with either of them.
That's the same buster VM, btw.
--
Why is it that all of the instruments seek
Control: severity -1 wishlist
John Paul Adrian Glaubitz wrote:
> On 11/3/19 11:19 PM, Holger Wansing wrote:
> >> Since no new arguments (pro or contra floppy support in d-i) were given, I
> >> suppose it looks like we will keep the status quo and therefore close the
> >> related bugs.
> >
> >
Hi Michael,
On Sun, Nov 03, 2019 at 11:45:07PM +0100, Michael Biebl wrote:
> Am 03.11.19 um 23:28 schrieb Toni Mueller:
> > I have tried two versions that don't work. Switching window managers is
> > not an option for me, and generally, it should work everywhere (imho).
> >
> > What would be th
Package: ntpsec
Version: 1.1.7+dfsg1-1
Severity: minor
Hi,
I notice that when ntpmon exits, it logs the following to the console:
$ ntpmon
Module/Binary version mismatch
Binary: ntpsec-@NTPSEC_VERSION_EXTENDED@
Module: ntpsec-1.1.7 2019-09-30T03:27:38Z
Perhaps @NTPSEC_VERSION_EXTENDED@ is not g
Am 03.11.19 um 23:45 schrieb Michael Biebl:
> If I had to guess I'd say it's either an issue of Qt5 or the tray
> application you are using in awesome. Might also be related to compositing.
> Maybe those hints help you further investigation this issue.
Googling a bit shows issues like this one
ht
On 2019-11-04 01:15, Emmanuel Arias wrote:
Hi,
I've just prepare the new upstream release (for some reason
the upstream branch was not merge to master). [1]
Emmanuel, the work-in-progress is in the experimental branch. Push to
experimental first before pulling into master.
Drew
Am 03.11.19 um 23:28 schrieb Toni Mueller:
>
>
> Hi Michael,
>
> nice that it works for you.
>
> On Sun, Nov 03, 2019 at 11:14:06PM +0100, Michael Biebl wrote:
>> Am 03.11.19 um 21:54 schrieb Toni Mueller:
>>> Package: firewall-applet
>>> Version: 0.7.2-1
>>> Severity: important
>>>
>>> Dear Ma
Package: libbsd-dev
Version: 0.10.0-1
Severity: wishlist
Hi,
I'm trying to prepare new version of bsd-mailx package from the OpenBSD
repository, but it unfortunatelly fails to compile because they switched
to using to user_from_uid() and uid_from_user(), see the links below.
Would it be possible
Hi,
Holger Wansing wrote:
> John Paul Adrian Glaubitz wrote:
> > On 9/8/19 11:43 PM, Holger Wansing wrote:
> > > I assume, this bugreport was motivated by bug #880122 by Chris Lamb from
> > > 2017,
> > > which proposed to remove floppy support from hw-detect package, since
> > > floppies appear
On 11/3/19 11:24 PM, John Paul Adrian Glaubitz wrote:
> I disagree. It's a really weak argument. Are you really saying that people
> are getting frustrated because they are reading the word "floppy"? That
> doesn't make any sense at all.
And I just saw the "argument". The argument was "It's 2018".
On 11/3/19 11:19 PM, Holger Wansing wrote:
>> Since no new arguments (pro or contra floppy support in d-i) were given, I
>> suppose it looks like we will keep the status quo and therefore close the
>> related bugs.
>
> To get this to an end, I will:
>
> - simplify related templates, to remove th
Control: severity -1 serious
Hi KDE maintainers,
I've just uploaded libgwenhywfar/4.99.24rc8-1 and libaqbanking/5.99.43beta-1 to
unstable, which now makes package kmymoney/5.0.6-1 fail to build from source.
Hence I've raised this bug's severity to serious.
Please update to the current upstream v
Package: ftp.debian.org
Severity: normal
Please remove sqlkit. It's dead upstream, unmaintained (last upload in 2015)
and depends on pygtk/Python 2.
Cheers,
Moritz
block 937085 by 780741
thanks
Hi,
I ported amo-changelog and xpi-repack to Python 3 in version 0.54, but I
wasn't able to port all scripts, because there is no Python 3 version of
redland-bindings (see Debian bug #780741).
--
Benjamin Drung
Debian & Ubuntu Developer
Package: ftp.debian.org
Severity: normal
Please remove activity-log-manager. It's unmaintained (last maintainer upload
in 2011) and depends on legacy codebases (pygtk, Python 2).
Cheers,
Moritz
Package: libmoo-perl
Severity: wishlist
Hi,
Developing with Moo has many advantages, but also one pitfall:
Namespaces may require cleanup. The issue is documented here:
https://metacpan.org/pod/Moo#CLEANING-UP-IMPORTS
Perhaps libnamespace-clean-perl should be a recommended package.
Kind re
Package: ftp.debian.org
Severity: normal
Please remove driconf. It's dead upstream (last release in 2006), unmaintained
(no upload since 2014) and depends on pygtk and Python 2.
Cheers,
Moritz
Control: tag -1 moreinfo
On 03/11/2019 14.14, Nicolas Patrois wrote:
> The package can’t build the driver because it does not find the snd-page-alloc
> kernel driver in the 4.17.0 kernel (nor in 4.18).
The nvidia driver is not related to any sound driver kernel module.
The error messages you post
On 03-Nov-2019, Paul Gevers wrote:
> With a recent upload of python-coverage the autopkgtest of
> python-coverage fails in testing when that autopkgtest is run with the
> binary packages of python-coverage from unstable. It passes when run
> with only packages from testing.
Thank you for investig
Ansgar writes:
> Sean Whitton writes:
>>> +Packages that include system services should include ``systemd`` units
>>> +to start or stop services.
>>> +
>>> Packages that include daemons for system services should place scripts
>>> in ``/etc/init.d`` to start or stop services at boot time or dur
On Sun, Nov 03, 2019 at 07:22:38PM +, Sudip Mukherjee wrote:
> * Package name: trace-cmd
>Version : 2.8.3-1
> Changes since the last upload:
>
>* Update to upstream v2.8.3 and change maintainer (Closes: #943551)
Fails to build for me:
NO_PYTHON forced: swig not inst
Hi Dmitry
On 02-11-2019 08:31, Dmitry Smirnov wrote:
> On Saturday, 2 November 2019 5:38:33 PM AEDT Dmitry Smirnov wrote:
>> I have noticed the problem but I can neither reproduce not understand what
>> is causing it. I suspect a bug in autopkgtest as I don't see why would
>> that particular comma
Package: firewall-applet
Version: 0.7.2-1
Severity: important
Dear Maintainer,
I am trying to run the firewall-applet on my buster machine, and neither
the buster version nor the version in testing actually create the tray
applet. Instead, the program just hangs with no output. For the buster
ver
Control: close -1
Control: fixed -1 0.9.16-1
Am Sonntag, 3. November 2019 schrieb Antoni Villalonga:
> On Wed, Oct 30, 2019 at 02:59:32PM +, Mike Gabriel wrote:
> > Package: src:x11vnc
> > Version: 0.9.13-6
> > Severity: wishlist
> >
> > While this is not a functionality improvement, it helps
On Sun, 03 Nov 2019 14:18:37 -0500, Boyuan Yang wrote:
> Dear libtest-corpus-audio-mpd-perl maintainers,
>
> I noticed that libtest-corpus-audio-mpd-perl cannot migrate to testing since
> the latest upload (back in 2015) was not a source-only upload. This issue is
> blocking package mpdtoys from
Hi Rebecca,
I've just uploaded the Python 2 removal from deepnano (ie: I switched it
to Python 3). It looks like working... ;)
So, now there's no blockger for theano. Please upload what I saw you
commited in the Git repo for Theano! Since you're a DM, I'm guessing you
already have a ACL for this
Did you investigate anything suggested in
https://forum.manjaro.org/t/computer-does-not-shut-down-because-of-mariadb/81565
?
Did you figure it out?
On 11/3/19 8:51 PM, Joerg Dorchain wrote:
> I would expect more
> explicit hints for such drastic changes from my favourite
> distribution.
- Your favorite distribution uses systemd as default, expect init script
to be broken and/or not maintained at all. I'm not maintaining something
I'm not g
Hi Ross,
IMO the practice of referencing packages which do not exist in the
current release from debian-multimedia just to keep an autogenerated
listing of packages include them for the benefit of the users of
previous releases is backwards.
The page should just show the union of the the dependenc
Control: tags -1 confirmed
Hi Stéphane,
On 07-10-2019 15:50, Stéphane Glondu wrote:
> I think it's time to upgrade OCaml to 4.08.1.
>
> It has been uploaded to experimental, and builds fine on all release
> architectures. [1]
>
> Most of reverse-dependencies recompile fine with no changes (on
>
Control: tags -1 confirmed
Hi Drew,
On 30-10-2019 08:26, Drew Parsons wrote:
> So yes, the unversioned libhypre package name is certainly the option
> that will preserve the greatest sanity (I'll proceed directly with
> 2.18.2 once you give the thumbs up).
Thumbs up.
Paul
signature.asc
Descr
On Sun, Nov 03, 2019 at 04:39:59PM +0100, Bernd Zeimetz wrote:
> > Justification: Breaks silently functionality on upgrade
>
> not if you'd use the default init system.
Policy says all init system are equally supported.
>
> > In my setup, gpsd is required to start at system boot with a sysv
> >
Control: tags -1 confirmed
Hi Micha,
On 20-10-2019 13:47, Micha Lenk wrote:
> Package: release.debian.org
> Severity: normal
> User: release.debian@packages.debian.org
> Usertags: transition
>
> Hi release team,
>
> AqBanking and Gwenhywfar, a Germany focused pair of libraries for online
>
Source: libclass-methodmaker-perl
Version: 2.24-1
Tags: patch
User: debian-cr...@lists.debian.org
Usertags: ftcbfs
Thanks to Niko's work, debhelper now knows how to cross and we have a
temporary provides for perl-xs-dev. As it happens, this is enough to
make libclass-methodmaker-perl cross buildab
On Sun, Nov 03, 2019 at 08:17:30AM -0500, Theodore Y. Ts'o wrote:
> On Sun, Nov 03, 2019 at 05:07:22AM +0100, gregor herrmann wrote:
> >
> > Cron sends me the following mail once per week:
> >
> > /sbin/e2scrub_all: line 173: /proc/8234/fd/pipe:[90083173]: No such file or
> > directory
>
> Greg
Source: txt2tags
Followup-For: Bug #938735
Hi,
Seems somebody has ported this to Python 3:
https://github.com/jendrikseipp/txt2tags
This could be a better alternative to removal of the package in case
current upstream doesn't provide an updated version.
HTH,
-- System Information:
Debian Relea
Source: python-coverage
Version: 4.5.2+dfsg.1-2
X-Debbugs-CC: debian...@lists.debian.org
User: debian...@lists.debian.org
Usertags: regression
Dear maintainers,
With a recent upload of python-coverage the autopkgtest of
python-coverage fails in testing when that autopkgtest is run with the
binary
On Sun, Oct 27, 2019 at 11:27:00AM +0100, Matthias Klose wrote:
> Package: src:breezy
> Version: 3.0.1-6
> Severity: important
> Tags: sid bullseye
> User: debian-pyt...@lists.debian.org
> Usertags: python3.8
>
> breezy fails when trying to build for python 3.8:
>
>
> breezy/_simple_set_pyx.c:31
Source: tryton-proteus, tryton-modules-account-fr
Control: found -1 tryton-proteus/5.0.4-1
Control: found -1 tryton-modules-account-fr/5.0.1-2
Severity: serious
Tags: sid bullseye
X-Debbugs-CC: debian...@lists.debian.org
User: debian...@lists.debian.org
Usertags: breaks needs-update
Dear maintaine
Source: tryton-proteus, tryton-modules-purchase-request
Control: found -1 tryton-proteus/5.0.4-1
Control: found -1 tryton-modules-purchase-request/5.0.2-2
Severity: serious
Tags: sid bullseye
X-Debbugs-CC: debian...@lists.debian.org
User: debian...@lists.debian.org
Usertags: breaks needs-update
De
Package: ftp.debian.org
Severity: normal
Dear FTP-Masters,
Thunderbird is partielly following the needed removel request for
firefox-esr.
Like for Firefox also Thunderbird wont ever get able to build on armel
due the lack of node-js as a build dependency.
And armhf is failing to build due memor
Forwarded upstream as https://github.com/scop/bash-completion/pull/359
Source: tlsh
Version: 3.4.4+20151206-1.2
Severity: serious
X-Debbugs-CC: debian...@lists.debian.org, mo...@debian.org
User: debian...@lists.debian.org
Usertags: regression
Dear maintainers,
With a recent upload of tlsh the autopkgtest of tlsh fails in testing
when that autopkgtest is run with the
Package: sponsorship-requests
Severity: normal
Dear mentors,
I am looking for a sponsor for my package "trace-cmd"
* Package name: trace-cmd
Version : 2.8.3-1
Upstream Author : Steven Rostedt
* URL : http://kernelshark.org/
* License
Package: libtest-corpus-audio-mpd-perl
Version: 1.120990-2
Control: tags -1 + pending patch
X-Debbugs-CC: gre...@debian.org fschl...@zedat.fu-berlin.de
Dear libtest-corpus-audio-mpd-perl maintainers,
I noticed that libtest-corpus-audio-mpd-perl cannot migrate to testing since
the latest upload (b
Package: iwd
Version: 1.0-1
Severity: serious
This bug report was opened to temporarily prevent iwd 1.0 from migrating
to testing to give NetworkManager some time to catch up.
Regards,
Andreas Henriksson
Package: git-daemon-run
Version: 1:2.24.0~rc2-1dotlink1
Severity: normal
Tags: patch
Dear Git Maintainer,
(runit maintainer in CC)
Since runit 2.1.2-36, update-service will be used also to record the local admin
settings about the wanted status of a service (enabled/disabled).
See #942323 to unde
Package: src:linux
Version: 5.3.7-1
Severity: important
Tags: upstream
Dear Maintainer,
Apparently as of kernel 5.0, all keys picked up from uefi are put in the
.platform keyring, which are not trusted by kernel to be used for module
signing. This makes it impossible to insmod third party modules
Source: golang-github-nrdcg-goinwx
Version: 0.6.1-1
Severity: wishlist
X-Debbugs-CC: Thorsten Alteholz ,
ftpmas...@debian.org
Hi,
I just ACCEPTed golang-github-nrdcg-goinwx from NEW but was wondering
if you could find a nicer copyright holder name than just "Andrew."
Whatever the legality of t
Dear Maintainer,
libreoffice (versioned as 1:6.3.3-2~bpo10+1) migrated in bpo but the problem is
still there.
Kind regards.
Package: checkstyle
Version: 8.15-1
Severity: normal
Dear Maintainer,
checkstyle can not be run with the wrapper script (/usr/bin/checkstyle).
The following happens:
$ checkstyle -c checkstyle.xml src/
[warning] /usr/bin/checkstyle: JVM flavor 'sunmin5' not understood
[warning] /usr/bin/checkst
Package: release.debian.org
Severity: normal
Tags: buster
User: release.debian@packages.debian.org
Usertags: pu
Hi SRM'ers
libxslt is affected by CVE-2019-18197 and the issue was fixed in
unstable via the NMU 1.1.32-2.2 cherry picking the upstream commit. As
per previous upload here the simpl
Source: gparted
Version: 1.0.0-0.1~exp
Severity: important
X-Debbugs-CC: ni...@debian.org
The latest experimental NMU of gparted created a gparted-common
package and put the AppStream metadata in that package.
According to the guidelines
/usr/share/metainfo/gparted.appdata.xml
should be installed
On Du, 03 nov 19, 19:33:59, Dmitry Smirnov wrote:
> Package: wnpp
> Severity: wishlist
> X-Debbugs-CC: debian-de...@lists.debian.org
> Owner: Dmitry Smirnov
>
>Package name: docker-systemctl-replacement
> Version: 1.4.3424
> Upstream Author: Guido U. Draheim
> License: EUPL-1.
Source: yapsy
Version: 1.12.0-1.1
X-Debbugs-CC: debian...@lists.debian.org, mo...@debian.org
User: debian...@lists.debian.org
Usertags: regression
Dear maintainers,
With a recent upload of yapsy the autopkgtest of yapsy fails in testing
when that autopkgtest is run with the binary packages of yap
Package: octave
Version: 5.1.0-4
Severity: normal
Dear Maintainer,
Last upgrade to octave 5.1.0-4 did not success here:
Setting up octave (5.1.0-4) ...
/usr/bin/octave-cli: error while loading shared libraries: liblapack.so.3:
cannot open shared object file: No such file or directory
dpkg: erro
I've found a way to disable this message: in PCManFM in the Edit
menu, choose Preferences, and select "Don't ask options on launch
executable file".
Whether this should be the default or not is up for debate, but
personally I found the current default annoying, and the setting is not
very easy to
Package: exim4-daemon-light
Version: 4.93~RC0-1
Severity: serious
Tags: ftbfs
Justification: fails to build from source (but built successfully in the past)
4.93~RC0-1 and later (including 4.93~RC1-2) FTBFS on mipsel, the binary
is built but broken.
/path/to/exim -C /dev/null -be '${if bool{0}{ye
Hi Sando and Holger,
according to Holger, I can upload the new version of python-debianbts
that removes Python2 support to unstable, since piuparts is broken in
sid and bullseye anyways.
Just to verify once more before breaking stuff for real: is this OK for
everyone?
Cheers,
Basti
Am 24.08.
Control: reopen-1
Ehmm
On 03-11-2019 18:42, Paul Gevers wrote:
> This seems to be finished, closing.
I must have been blind...
Paul
signature.asc
Description: OpenPGP digital signature
Hi Nicolas,
If you wish GParted to run under Wayland, then it needs to be built with
the --enable-xhost-root configure option. Notice that this is the way
Fedora configures their RPM packages [1].
[1] https://koji.fedoraproject.org/koji/packageinfo?packageID=1950
If you click on "gparted-1.0.0-
The test failures are:
armhf: 86, probably all #924036
i386: 1, TestDFM_Approx.test_smoothed_measurement_disturbance out of
tolerance: suspect rounding error (x87 extra precision).
arm64, ppc64el, s390x: the same 3,
base.tests.test_penalized.TestPenalizedPoissonOraclePenalized2*: looks
like
Hi Simon, and all others,
First: thanks for all your work and energy putted in into resolving
this issue.
On Wed, Oct 30, 2019 at 03:04:26PM +, Simon McVittie wrote:
> On Wed, 30 Oct 2019 at 15:45:19 +0100, Gunnar Hjalmarsson wrote:
> > Seeing that you included quite a few patches in this upd
Hi Felix
On 2019-11-03 05:49:59, Felix Lechner wrote:
> On Sun, Nov 3, 2019 at 2:24 AM Sebastian Ramacher
> wrote:
> >
> > In libdvdread 6.0.1-1, the following line was added to "fix" the
> > lintian info on the missing Build-Depends-Package:
> >
> > | * Build-Depends-Package: #PACKAGE#
> >
> >
Hi,
I've just prepare the new upstream release (for some reason
the upstream branch was not merge to master). [1]
But is necessary some work with patches, are failing.
I can work on it tomorrow.
[1] https://salsa.debian.org/python-team/modules/dask
Cheers,
Arias Emmanuel
@eamanu
http://eamanu.
Package: zfs-auto-snapshot
Version: 1.2.1-1+deb9u1
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Trying to use the package on debian stretch
* What exactly did you do (or not do) t
Hi,
> Justification: Breaks silently functionality on upgrade
not if you'd use the default init system.
> In my setup, gpsd is required to start at system boot with a sysv
> init.
That is not supported by the gpsd upstream anymore, all the
hotplugging/udev rules require systemd (which makes a l
On Wed, Oct 30, 2019 at 02:59:32PM +, Mike Gabriel wrote:
> Package: src:x11vnc
> Version: 0.9.13-6
> Severity: wishlist
>
> While this is not a functionality improvement, it helps with security
> audits. Please consider removing the libvncclient/ and libvncserver/ folders
> from the x11vnc or
Package: wnpp
Owner: gregor herrmann
Severity: wishlist
X-Debbugs-CC: debian-de...@lists.debian.org, debian-p...@lists.debian.org
* Package name: libcolor-rgb-util-perl
Version : 0.599
Upstream Author : perlancar
* URL : https://metacpan.org/release/Color-RGB-Util
* L
it looks to me that python-xarray 0.14 needs a newer dask version as well.
Package: wnpp
Owner: gregor herrmann
Severity: wishlist
X-Debbugs-CC: debian-de...@lists.debian.org, debian-p...@lists.debian.org
* Package name: libtest-randomresult-perl
Version : 0.001
Upstream Author : perlancar
* URL : https://metacpan.org/release/Test-RandomResu
Control: forwarded -1 https://github.com/linbox-team/linbox/issues/238
On Sun, Nov 3, 2019 at 8:57 AM Matthias Klose
mailto:d...@debian.org>> wrote:
linbox ftbfs on armhf, bus errors in the test suite, like
../build-aux/test-driver: line 107: 21585 Bus error "$@" >
$log_file 2>&1
F
Hi,
I just encountered the same problem.
I'm fairly certain the root cause is that the game assumes some specific
named font is available, and fails when it isn't (i.e. missing dependency).
I looked at it using xtruss
(https://www.chiark.greenend.org.uk/~sgtatham/xtruss/) and it seems to try
to
Package: i3-wm
Version: 4.17.1-1
Severity: normal
Tags: l10n
Dear Maintainer,
I'm trying to setup a i3, but I encountered a problem with keyboard
layout setup. Multiple layouts set up in /etc/default/keyboard are
ignored by i3 and only 'us' layout is available. On the other hand,
keyboard options
Package: src:linbox
Version: 1.6.3-1
Severity: serious
Tags: sid bullseye
linbox ftbfs on armhf, bus errors in the test suite, like
../build-aux/test-driver: line 107: 21585 Bus error "$@" >
$log_file 2>&1
FAIL: test-smith-form-valence
the builders are now machines with 64bit ke
Hi Sebastian,
On Sun, Nov 3, 2019 at 2:24 AM Sebastian Ramacher wrote:
>
> In libdvdread 6.0.1-1, the following line was added to "fix" the
> lintian info on the missing Build-Depends-Package:
>
> | * Build-Depends-Package: #PACKAGE#
>
> This causes the package name of the shared library to be su
David Christensen writes:
> Please see attached game save file freeciv-T0202-Y01510-manual.sav.bz2:
(This save game was created with Freeciv 2.5.6, using the 'classic'
ruleset.)
> 1. Swamp near Kobenhavn with roads being upgraded to railroads.
I assume this is the tile highlighted if you paste
On Sun, 3 Nov 2019 13:45:37 +0100 Matthias Klose
wrote:
> On 03.11.19 13:10, Neil Williams wrote:
> > On Wed, 30 Oct 2019 16:44:24 +0100 Matthias Klose
> > wrote:
> >> On 27.10.19 17:59, Neil Williams wrote:
> >>> Package: python3
> >>> Version: 3.7.5-1
> >>> Severity: normal
> >>>
> >>> As discu
Package: python3-statsmodels
Version: 0.10.1-1
Control: fixed -1 0.9.0-6
Severity: serious
While making statsmodels clean up after its tests, I accidentally also
made it ignore failed tests.
Some tests did fail on at least ppc64el and s390x; I don't yet know if
these are actually a serious pr
1 - 100 of 143 matches
Mail list logo