Re: xmgrace fails, cannot find base type1 fonts

On 2018-03-12 10:11, Hunter, Kendall wrote: > I am experiencing the same problem mentioned in this > post: xmgrace fails on > cygwin64. It simply doesn't start, even if GRACE_HOME is properly set to > /usr/share/grace. I believe I've found a fi

Re: xmgrace fails on cygwin64

[Please send problem reports to the Cygwin mailing list, not to individual package maintainers.] On 1/13/2018 11:42 AM, Klaus Morawetz wrote: Dear Ken Brown, installing cygwin 64 freshly on windows 64 xterms run and everything fine except xmgrace. It starts not with message: --> Broken or i

Re: Xmgrace now crashes with SIGSYS on launch due to recent update

On Sun, 23 Dec 2012 18:50:03 +0100, Legorol wrote: > Since a recent update, launching xmgrace now fails with a SIGSYS, even > on a fresh Cygwin installation. I believe the cause is an update to > libXmHTML0, of which the current version is 1.1.7-12. When I roll > libXmHTML0 back to 1.1.7-11, xmgrac

Re: xmgrace

Morgan Gangwere wrote: > Volker Quetschke wrote: >> You are trying to start xmgrace from outside a cygwin environment, i.e. >> it does not know about cygwin softlinks. >> >> To confirm if I'm guessing right try this (only works from a cygwin >> shell): >> >> $ ls -l `which xmgrace` >> >> Otherwise

Re: xmgrace

Volker Quetschke wrote: You are trying to start xmgrace from outside a cygwin environment, i.e. it does not know about cygwin softlinks. To confirm if I'm guessing right try this (only works from a cygwin shell): $ ls -l `which xmgrace` Otherwise provide more info about the problem. Volker

Re: xmgrace

Hi, Jorg Kewisch wrote: > I have been using the plot program xmgrace (package grace) for a long > time, and it has stopped working (tested with 3 cygwin from-scratch > installations ) > > Symptoms: > x-server is running > xterm is running > xclock produces clock > xmgrace exits immediately withou

Re: Xmgrace problems

Yes, due to some error I got always the src. But now I got the binary for ash By the way, it came with the name "sh.exe" isntead of "ash.exe". When I tried to change its name it did not work, the file just dissapeared !!! So I made a symbolic link on /bin for my location of sh.exe with the name

Re: Xmgrace problems

then, can you please tell me how to install the package without rebuild ? I mean that the package I got is only source, I don't see any binary file there Christopher Faylor-8 wrote: > > On Sun, Dec 02, 2007 at 10:02:05AM -0800, horacioemilio wrote: >>Thanks for your useful answer. >> >>By th

Re: Xmgrace problems

[Reformatted: see http://cygwin.com/acronyms/#TOFU ] On 2007-12-02 17:27Z, horacioemilio wrote: > > Greg Chicares-2 wrote: >> >> On 2007-12-02 16:35Z, horacioemilio wrote: >>> >>> 1- in a general way, how can I install new specific programs once I need >>> them ? Should I use again setup.exe li

Re: Xmgrace problems

On Sun, Dec 02, 2007 at 10:02:05AM -0800, horacioemilio wrote: >Thanks for your useful answer. > >By the way, here is described a similar problem (and without answer) > >http://www.eggheads.org/pipermail/bugs/2006-February/000902.html Actually, the right answer is to not install the ash sources.

Re: Xmgrace problems

Thanks for your useful answer. By the way, here is described a similar problem (and without answer) http://www.eggheads.org/pipermail/bugs/2006-February/000902.html Christopher Faylor-8 wrote: > > On Sun, Dec 02, 2007 at 09:27:28AM -0800, horacioemilio wrote: >>Ok, I did that, so I got the

Re: Xmgrace problems

On Sun, Dec 02, 2007 at 09:27:28AM -0800, horacioemilio wrote: >Ok, I did that, so I got the package; ash-20040127-3-src.tar.bz2 > >Then I do not know if there is some special mechanism in cygwin to install >this into the system. > >I just tried to compile using; 1.configure, 2. make ; but got erro

Re: Xmgrace problems

Ok, I did that, so I got the package; ash-20040127-3-src.tar.bz2 Then I do not know if there is some special mechanism in cygwin to install this into the system. I just tried to compile using; 1.configure, 2. make ; but got errors; $ make install gcc -DPACKAGE=\"ash\" -DVERSION=\"1.00\" -I. -I

Re: Xmgrace problems

On 2007-12-02 16:35Z, horacioemilio wrote: > > 1- in a general way, how can I install new specific programs once I need > them ? Should I use again setup.exe like the first time I installed the > whole system but only selecting the package that I need ? Yes. -- Unsubscribe info: http://cygw

Re: Xmgrace on cygwin

Please no personal email, . You neglected to give any information regarding your setup, see: > Problem reports: http://cygwin.com/problems.html but I might hazard a guess that you're seeing this problem:

Re: XmGrace does not work

On 10/5/06, Volker Quetschke <[EMAIL PROTECTED]> wrote: > I've installed Cygwin in my laptop running Windows XP, and a program > that I really need a lot (XmGrace) does not work. When I type the > command "xmgrace" and press Enter, nothing happens. I've seen that > this problem is related to the

Re: XmGrace does not work

> I've installed Cygwin in my laptop running Windows XP, and a program > that I really need a lot (XmGrace) does not work. When I type the > command "xmgrace" and press Enter, nothing happens. I've seen that > this problem is related to the current version of xorg. Ok, I > reinstalled a previous ve

Re: XmGrace does not work

Ok, here's what I did: I'm just starting using cygwin, and really don't understand much. So, after many trials, i just decided to remove the whole cygwins installation and make a fresh install, using the most recent packages. After this installation I ran rebaseall, and xmgrace did work. However

Re: XmGrace does not work

Gustavo: I ran rebaseall (from a DOS prompt, under ash, is it correct?) and XmGrace still does not work <:-( []s, Roberto 2006/10/5, Gustavo Seabra <[EMAIL PROTECTED]>: Hi Roberto,alled cygwin in a laptop here, and had exactly the same problem. The solution was *NOT* to reverse the xorg, but

Re: XmGrace does not work

Hi Roberto,alled cygwin in a laptop here, and had exactly the same problem. The solution was *NOT* to reverse the xorg, but just to run rebaseall after instalation of the most current version. A note: if you have the most current version of xorg, even after you rebaseall, you will have the same p

Re: XmGrace does not work

Roberto Veiga wrote: Dear all: I've installed Cygwin in my laptop running Windows XP, and a program that I really need a lot (XmGrace) does not work. When I type the command "xmgrace" and press Enter, nothing happens. I've seen that this problem is related to the current version of xorg. Ok, I r

Re: xmgrace fails to start

I checked for symlinks, and also executed xmgrace in /etc/share/grace/bin home directory with the same result. Volker Quetschke determined that the problem lies with the X-Server This error does not arise using the previous version xorg-X11-* 6.8.2.0-1. This discussion should continue on the cyg

RE: xmgrace fails to start

On 18 July 2006 18:34, Larry Hall (Cygwin) wrote: > Charles L. Werner wrote: >> In addition, I ran strace with xmgrace, >> and got the following message: >> >> Process 3996, exception 4005 at 7C81EB33 >> >> and an error in a box 16 bit MS-DOS Subsystem: >> >> /usr/share/grace/bin >> The NTV

Re: xmgrace fails to start

Charles L. Werner wrote: In addition, I ran strace with xmgrace, and got the following message: Process 3996, exception 4005 at 7C81EB33 and an error in a box 16 bit MS-DOS Subsystem: /usr/share/grace/bin The NTVDM CPU has encountered an illegal instruction CS:0674 IP:01c7 OP:fe95 b8 ff ff

Re: xmgrace fails to start

In addition, I ran strace with xmgrace, and got the following message: Process 3996, exception 4005 at 7C81EB33 and an error in a box 16 bit MS-DOS Subsystem: /usr/share/grace/bin The NTVDM CPU has encountered an illegal instruction CS:0674 IP:01c7 OP:fe95 b8 ff ff My computer is a 3 GHz