RE: [gentoo-user] LiveGUI USB Image

2024-01-04 Thread Laurence Perkins
>-Original Message- >From: Peter Humphrey >Sent: Thursday, January 4, 2024 5:01 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] LiveGUI USB Image > >On Thursday, 4 January 2024 02:48:13 GMT Adam Carter wrote: >> > > dd if=/path/to/iso-image of=/dev/sd? bs=4M status=pro

RE: [gentoo-user] Re: Abnormal processor temperature.

2023-11-27 Thread Laurence Perkins
> -Original Message- > From: Grant Edwards > Sent: Wednesday, November 22, 2023 8:36 AM > To: gentoo-user@lists.gentoo.org > Subject: [gentoo-user] Re: Abnormal processor temperature. > > On 2023-11-21, Laurence Perkins wrote: > > > I have a sy

RE: [gentoo-user] Abnormal processor temperature.

2023-11-21 Thread Laurence Perkins
> -Original Message- > From: Michael > Sent: Tuesday, November 21, 2023 4:15 PM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Abnormal processor temperature. > > On Tuesday, 21 November 2023 22:12:28 GMT Laurence Perkins wrote: > > I ha

[gentoo-user] Abnormal processor temperature.

2023-11-21 Thread Laurence Perkins
I have a system here running an Intel N97 processor, which is idling at 70-80C on Gentoo with all cores 99% idle. This is 40 degrees hotter than it runs on Ubuntu or Windows 10. Powertop confirms that the CPU is spending nearly all of its time in idle mode. I have tried both the 6.1 and the 6

RE: [gentoo-user] Emerge -K ignoring new packages

2023-11-20 Thread Laurence Perkins
> -Original Message- > From: Wols Lists > Sent: Monday, November 20, 2023 9:46 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Emerge -K ignoring new packages > > On 20/11/2023 17:12, Vitaliy Perekhovy wrote: > > On Mon, Nov 20, 2023 at 05:07:45PM +, Peter Humphr

RE: [gentoo-user] RE: libva-glx.so.2

2023-10-23 Thread Laurence Perkins
> From: Dale rdalek1...@gmail.com<mailto:rdalek1...@gmail.com> > Sent: Monday, October 23, 2023 12:47 PM > To: gentoo-user@lists.gentoo.org<mailto:gentoo-user@lists.gentoo.org> > Subject: Re: [gentoo-user] RE: libva-glx.so.2 > > Laurence Perkins wrote: &g

[gentoo-user] RE: libva-glx.so.2

2023-10-23 Thread Laurence Perkins
> From: Laurence Perkins lperk...@openeye.net<mailto:lperk...@openeye.net> > Sent: Monday, October 23, 2023 11:05 AM > To: gentoo-user@lists.gentoo.org<mailto:gentoo-user@lists.gentoo.org> > Subject: [gentoo-user] libva-glx.so.2 > > I have a program with an embedded

[gentoo-user] libva-glx.so.2

2023-10-23 Thread Laurence Perkins
I have a program with an embedded copy of ffmpeg that is choking on a lack of libva-glx.so.2. Debian has it in a libva-glx package. Manjaro has it in their general libva package. On Gentoo there is no trace of it... At least not until I use the 'ebuild' tool to build the libva package manually

RE: [gentoo-user] Re: OFF TOPIC Need Ubuntu network help: boot loader info

2023-10-19 Thread Laurence Perkins
> >That config kinda reminds me of the old grub. A title line, location of >kernel and then options. Sounds easy enough. The new grub config is almost >impossible to config by hand. They had to make a tool to do it. That says a >lot there. ;-) > >Dale > You can still write that kind of

RE: [gentoo-user] world updates blocked by Qt

2023-10-11 Thread Laurence Perkins
> -Original Message- > From: Philip Webb > Sent: Wednesday, October 11, 2023 9:44 AM > To: Gentoo User > Subject: [gentoo-user] world updates blocked by Qt > > CAUTION: This is an EXTERNAL email. Do not click links or open attachments > unless you recognize the sender and know the cont

RE: [gentoo-user] Controlling emerges

2023-09-21 Thread Laurence Perkins
> -Original Message- > From: Wol > Sent: Wednesday, September 20, 2023 3:07 PM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Controlling emerges > > > What you have is not a portage problem. It is a orthodox parallelism > > problem, and I think you are thinking your

RE: [gentoo-user] Controlling emerges

2023-09-18 Thread Laurence Perkins
> From: Alan McKinnon alan.mckin...@gmail.com > Sent: Monday, September 18, 2023 9:13 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Controlling emerges > > > > On Mon, Sep 18, 2023 at 6:03 PM Peter Humphrey

RE: [gentoo-user] Is distfile partial mirror with failover possible?

2023-09-05 Thread Laurence Perkins
> > > From: Alan McKinnon alan.mckin...@gmail.com > Sent: Monday, September 4, 2023 12:38 PM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Is distfile partial mirror with failover possible? > > BTW Welcome back A

RE: [gentoo-user] VPN newbie questions

2023-08-21 Thread Laurence Perkins
> -Original Message- > From: Walter Dnes > Sent: Saturday, August 19, 2023 7:34 PM > To: Gentoo Users List > Subject: [gentoo-user] VPN newbie questions > > CAUTION: This is an EXTERNAL email. Do not click links or open attachments > unless you recognize the sender and know the cont

RE: [gentoo-user] Email clients

2023-07-31 Thread Laurence Perkins
> Jul 31, 2023 13:23:21 Matt Connell : > > > On Mon, 2023-07-31 at 20:16 +0300, Alexe Stefan wrote: > >>> Normally I would be in the chorus of "why do I need a whole entire > >>> web engine for an email client" but I'm also in the group of people > >>> who knows full well what the answer is. >

RE: [gentoo-user] Simple installation on BTRFS

2023-07-31 Thread Laurence Perkins
>-Original Message- >From: Neil Bothwick >Sent: Saturday, July 29, 2023 5:43 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] Simple installation on BTRFS > >On Sat, 29 Jul 2023 10:47:53 +0100, Michael wrote: >> I doubt I will need anything so frequent, these days my da

RE: [gentoo-user] Simple installation on BTRFS

2023-07-28 Thread Laurence Perkins
>If you can run two disks and raid, that's always a good idea. SMART is >supposed to catch disk problems, but they still do die without warning. > >btrfs raid is (still) full of gotchas, as far as I know. > >Don't use anything higher than raid-1. Parity raid isn't reliable last I knew >... It's

RE: [gentoo-user] Instrumenting emerges

2023-07-14 Thread Laurence Perkins
And if you want more than just the load average, atop keeps a log as well as being a top-style monitor program. LMP -Original Message- From: Frank Steinmetzger Sent: Thursday, July 13, 2023 4:02 PM To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] Instrumenting emerges Am Sa

RE: [gentoo-user] Something's actively deleting libssl.so.1.1 on my system!

2023-06-21 Thread Laurence Perkins
>-Original Message- >From: Alan Grimes >Sent: Tuesday, June 20, 2023 11:01 PM >To: Gentoo User >Subject: [gentoo-user] Something's actively deleting libssl.so.1.1 on my >system! > >CAUTION: This is an EXTERNAL email. Do not click links or open attachments >unless you recognize the se

RE: [gentoo-user] Re: Can't upgrade portage or update/install ebuilds

2023-06-13 Thread Laurence Perkins
>From: Mitch D. futurehyp...@gmail.com >Sent: Tuesday, June 13, 2023 9:36 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] Re: Can't upgrade portage or update/install ebuilds > >On Tue, Jun 13, 2023 at 10:38 AM Gr

[gentoo-user] Strange swap behaviour.

2023-03-21 Thread Laurence Perkins
I have a couple systems here which are swapping out constantly when the system is under load. This is almost certainly cache pressure since "under load" means "streaming large amounts of data to disk". The odd thing is they almost never swap back in. The swap device is getting about 2MB/s wor

RE: [gentoo-user] Jobs and load-average

2023-02-16 Thread Laurence Perkins
> -Original Message- > From: Rich Freeman > Sent: Thursday, February 16, 2023 6:24 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Jobs and load-average > > On Thu, Feb 16, 2023 at 8:39 AM Peter Humphrey wrote: > > > > I've just looked at 'man make', from which it's

RE: [gentoo-user] Re: my 5.15.93 kernel keeps rebooting

2023-02-16 Thread Laurence Perkins
>-Original Message- >From: John Covici >Sent: Wednesday, February 15, 2023 7:20 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] Re: my 5.15.93 kernel keeps rebooting > >On Wed, 15 Feb 2023 09:50:27 -0500, >Grant Edwards wrote: >> >> On 2023-02-14, Rich Freeman wrote:

RE: [gentoo-user] Glibc and binpackages

2023-01-17 Thread Laurence Perkins
> From: John Blinka john.bli...@gmail.com<mailto:john.bli...@gmail.com> > Sent: Friday, January 13, 2023 8:17 AM > To: gentoo-user@lists.gentoo.org<mailto:gentoo-user@lists.gentoo.org> > Subject: Re: [gentoo-user] Glibc and binpackages > > > > > On Thu, Ja

[gentoo-user] Glibc and binpackages

2023-01-12 Thread Laurence Perkins
I'm not sure if I'm doing something horribly wrong, or missing something blindingly obvious, but I've just had to boot a rescue shell yet again, so I'm going to ask. To save time and effort, I have my big, powerful machine create binpackages for everything when it updates, and then let all my s

RE: [gentoo-user] Looking for simple GUI MUA that works with ssmtp

2022-12-28 Thread Laurence Perkins
> -Original Message- > From: Walter Dnes > Sent: Wednesday, December 28, 2022 9:17 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Looking for simple GUI MUA that works with ssmtp > > On Mon, Dec 26, 2022 at 09:04:07PM -0500, Jack wrote > > > Can't mutt open an htm

RE: [gentoo-user] Gaming on gentoo

2022-12-15 Thread Laurence Perkins
Note that some programs will dynamically load libraries at runtime, in addition to being linked against them at build time. These don’t necessarily show up in ldd. (Qt is horrible about this) Enabling core dumps or running under a debugger might shed some light on what’s going on. If that does

RE: [OT] Re: [gentoo-user] NAS and replacing with larger drives

2022-12-13 Thread Laurence Perkins
> -Original Message- > From: Peter Humphrey > Sent: Sunday, December 11, 2022 3:35 AM > To: gentoo-user@lists.gentoo.org > Subject: [OT] Re: [gentoo-user] NAS and replacing with larger drives > > On Friday, 9 December 2022 10:34:00 GMT I wrote: > > > in the 1970s the national grid wa

RE: [gentoo-user] NAS and replacing with larger drives

2022-12-08 Thread Laurence Perkins
> -Original Message- > From: Rich Freeman > Sent: Thursday, December 8, 2022 6:12 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] NAS and replacing with larger drives > > On Thu, Dec 8, 2022 at 8:59 AM Frank Steinmetzger wrote: > > > > You could, but this is either

[gentoo-user] Docker mounting strangeness.

2022-12-01 Thread Laurence Perkins
Starting here in case it’s something specific to Gentoo since I can’t find anybody complaining about the behaviour elsewhere on the web. I’m setting up an image to use Docker, which will be deployed on multiple machines. Since the containers will be large, I didn’t want them on the root partit

RE: [gentoo-user] Re: Upgrading from 5.14 to 6.0 version

2022-11-21 Thread Laurence Perkins
> -Original Message- > From: Michael > Sent: Monday, November 21, 2022 9:24 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Re: Upgrading from 5.14 to 6.0 version > > On Monday, 21 November 2022 16:50:14 GMT Grant Edwards wrote: > > On 2022-11-21, Michael wrote: > >

RE: [gentoo-user] where is 'mke2fs' ?

2022-11-17 Thread Laurence Perkins
> -Original Message- > From: Jack > Sent: Thursday, November 17, 2022 1:16 PM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] where is 'mke2fs' ? > > On 11/17/22 15:30, Philip Webb wrote: > > I need to rewrite the filesystem on a USB stick after it got damaged. > > My n

RE: [gentoo-user] Libsld, what gives?

2022-11-16 Thread Laurence Perkins
>tortoise ~ # eclean-dist > * Building file list for distfiles cleaning... > * ERROR: games-strategy/boswars-::poly-c failed (depend phase): > * EAPI 6 unsupported. Possibly also need to upgrade portage and/or gentoolkit first. That's usually a good idea regardless. >Hmm, poly-c is l

RE: [gentoo-user] Libsld, what gives?

2022-11-16 Thread Laurence Perkins
>-Original Message- >From: Alan Grimes >Sent: Wednesday, November 16, 2022 8:18 AM >To: gentoo-user@lists.gentoo.org; Andreas Fink >Subject: Re: [gentoo-user] Libsld, what gives? > >Andreas Fink wrote: >> On Wed, 16 Nov 2022 02:11:18 -0500 >> Alan Grimes wrote: >> >>> I'm jackhammering

RE: [gentoo-user] Libsld, what gives?

2022-11-16 Thread Laurence Perkins
>-Original Message- >From: Andreas Fink >Sent: Wednesday, November 16, 2022 6:59 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] Libsld, what gives? > >On Wed, 16 Nov 2022 02:11:18 -0500 >Alan Grimes wrote: > >> I'm jackhammering the system now and I'm getting about 5

RE: [gentoo-user] Re: Libsld, what gives?

2022-11-16 Thread Laurence Perkins
> -Original Message- > From: Grant Edwards > Sent: Wednesday, November 16, 2022 6:01 AM > To: gentoo-user@lists.gentoo.org > Subject: [gentoo-user] Re: Libsld, what gives? > > On 2022-11-16, Alan Grimes wrote: > > > Even though only 45 days have passed since my last update, I felt li

RE: [gentoo-user] Re: Upgrading from 5.14 to 6.0 version

2022-11-15 Thread Laurence Perkins
> That may be true. I used to not mind rebooting as much but since I started > having to use the init thingy, I only do it when really necessary. Those > init thingys have left a long term bad taste in my mouth. If I could, I'd > likely never reboot. Thing is, sometimes I have a power outage

RE: [gentoo-user] Re: e2fsck -c when bad blocks are in existing file?

2022-11-14 Thread Laurence Perkins
> > > -Original Message- > From: Grant Edwards > Sent: Saturday, November 12, 2022 7:55 PM > To: gentoo-user@lists.gentoo.org > Subject: [gentoo-user] Re: e2fsck -c when bad blocks are in existing file? > > On 2022-11-12, Michael wrote: > > > Have your questions been answered satisfa

RE: [gentoo-user] Upgrading from 5.14 to 6.0 version

2022-11-11 Thread Laurence Perkins
> -Original Message- > From: Arve Barsnes > Sent: Friday, November 11, 2022 2:36 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Upgrading from 5.14 to 6.0 version > > On Fri, 11 Nov 2022 at 11:30, Peter Humphrey wrote: > > I can't remember any difficulty going from

RE: [gentoo-user] Upgrading from 5.14 to 6.0 version

2022-11-11 Thread Laurence Perkins
> > > >P. S. Bought yet another 14TB hard drive. Working on filling it up now. >While my Cooler Master HAF-932 case is large, I need more drive bays. Dang >cases are pricey right now. :/ Bought one of these for a client's custom build recently. Enough 5.25" bays to mount in two of my fav

RE: [gentoo-user] Re: e2fsck -c when bad blocks are in existing file?

2022-11-09 Thread Laurence Perkins
Ok, so I decided to just go and test it myself. I created a 2MiB file and formatted it as ext4 and mounted it. I created a single, 100KiB file with a test pattern in this filesystem, and then unmounted it. I found the file in the raw storage with a hex editor, and computed a block offset in th

RE: [gentoo-user] e2fsck -c when bad blocks are in existing file?

2022-11-09 Thread Laurence Perkins
> >-Original Message- >From: Michael >Sent: Wednesday, November 9, 2022 12:47 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] e2fsck -c when bad blocks are in existing file? > >On Tuesday, 8 November 2022 18:24:41 GMT Wols Lists wrote: > >> MODERN DRIVES SHOULD NEVER HAV

RE: [gentoo-user] Re: e2fsck -c when bad blocks are in existing file?

2022-11-08 Thread Laurence Perkins
>-Original Message- >From: Grant Edwards >Sent: Tuesday, November 8, 2022 6:28 AM >To: gentoo-user@lists.gentoo.org >Subject: [gentoo-user] Re: e2fsck -c when bad blocks are in existing file? > >On 2022-11-08, Michael wrote: >> On Tuesday, 8 November 2022 03:31:07 GMT Grant Edwards wr

RE: [gentoo-user] Change History of linux commands

2022-10-07 Thread Laurence Perkins
> -Original Message- > From: tastytea > Sent: Friday, October 7, 2022 8:48 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Change History of linux commands > > On 2022-10-07 17:25+0200 n952162 wrote: > > > Am 07.10.22 um 16:56 schrieb Grant Taylor: > > > On 10/7/22 8

RE: [gentoo-user] seems lots of packages no longer in the tree

2022-09-26 Thread Laurence Perkins
> >with similar recommendations for the other packages you mention, except for >oracle-jdk where it recommends alternatives. > > >-- >Neil Bothwick > >ISDN: It Still Does Nothing > In Oracle's case, they're doing their very best to turn the licensing for every one of their products into a minefi

RE: [gentoo-user] Separate /usr partition

2022-09-15 Thread Laurence Perkins
>-Original Message- >From: Neil Bothwick >Sent: Thursday, September 15, 2022 10:35 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] Separate /usr partition > >On Thu, 15 Sep 2022 05:00:25 -0500, Dale wrote: > >> As I said, I do all mine by hand. I don't use make install

RE: [gentoo-user] Re: Full battery laptop only 1 hour

2022-09-15 Thread Laurence Perkins
>-Original Message- >From: Michael >Sent: Thursday, September 15, 2022 11:01 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] Re: Full battery laptop only 1 hour > >On Thursday, 15 September 2022 18:10:39 BST Laurence Perkins wrote: >> Not

RE: [gentoo-user] Re: Full battery laptop only 1 hour

2022-09-15 Thread Laurence Perkins
Note that most batteries these days in anything more complex than a watch have "smart" charge controllers and so upower or similar can read what their design watt-hours and current maximum capacity are. Also, often the total charge or discharge rate. That plus a little math should tell you if

RE: [gentoo-user] Separate /usr partition

2022-09-14 Thread Laurence Perkins
>-Original Message- >From: Peter Humphrey >Sent: Wednesday, September 14, 2022 8:51 AM >To: gentoo-user@lists.gentoo.org >Subject: [gentoo-user] Separate /usr partition > >CAUTION: This is an EXTERNAL email. Do not click links or open attachments >unless you recognize the sender and k

RE: [gentoo-user] Replace 8TB drive with 10TB drive on encrypted LVM

2022-09-14 Thread Laurence Perkins
>By the way, if someone wants to take this and make a how to out of it >somewhere, I think it would be great. This is doable. I even rebooted >and even tho the drives changed SATA ports, it worked fine. So, I guess >I did it right, even if no one thought it could be done. lol > >I really hope

RE: [gentoo-user] RE: [gentoo-user] Encrypted hard drives on LVM and urgent power shutdowns.

2022-09-13 Thread Laurence Perkins
>> If you want an arbitrarily large battery bank, just get a decent power >> inverter heavy enough to run your load and a battery float charger that can >> push enough amps to keep up, then put as big a stack of batteries as you >> like between the two. The nicer inverters will even warn you

RE: [gentoo-user] Encrypted hard drives on LVM and urgent power shutdowns.

2022-09-12 Thread Laurence Perkins
>-Original Message- >From: Dale >Sent: Sunday, September 11, 2022 10:58 PM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] Encrypted hard drives on LVM and urgent power >shutdowns. > >William Kenworthy wrote: >> If your using nut, it has to be setup - and should be regula

RE: [gentoo-user] Getting maximum space out of a hard drive

2022-08-22 Thread Laurence Perkins
Note that 60ish MB/sec is very reasonable for a rotational drive. They *can* technically go faster, but only if you keep the workload almost entirely sequential. Most filesystems require a fair amount of seeking to write metadata, which slows them down quite a bit. If you're desperate for per

RE: [gentoo-user] Backup program that compresses data but only changes new files.

2022-08-15 Thread Laurence Perkins
>-Original Message- >From: Rich Freeman >Sent: Monday, August 15, 2022 12:52 PM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] Backup program that compresses data but only >changes new files. > >On Mon, Aug 15, 2022 at 3:41 PM Dale wrote: >> >> Glad to know what I found

RE: [gentoo-user] Backup program that compresses data but only changes new files.

2022-08-15 Thread Laurence Perkins
>-Original Message- >From: Dale >Sent: Monday, August 15, 2022 12:47 PM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] Backup program that compresses data but only >changes new files. > >Wol wrote: >> On 15/08/2022 10:45, John Covici wrote: >>> zfs would solve your probl

RE: [gentoo-user] Backup program that compresses data but only changes new files.

2022-08-15 Thread Laurence Perkins
>> > > >Duplicity sounds interesting except that I already have the drive encrypted. >Keep in mind, these are external drives that I hook up long enough to complete >the backups then back in a fire safe they go. The reason I mentioned being >like rsync, I don't want to rebuild a backup from sc

RE: [gentoo-user] About to have fiber internet and need VPN info

2022-08-09 Thread Laurence Perkins
> >> >> Thank goodness I don't live in the good ol' US of A. The land of the >> free? Hm... > >We still have the protections introduced by the EU. Let's hope the government >aren't about to tear them up... oh, they are. America has been slowly going fascist for coming up on 100 years now. That

RE: [gentoo-user] About to have fiber internet and need VPN info

2022-08-09 Thread Laurence Perkins
>-Original Message- >From: Peter Humphrey >Sent: Monday, August 8, 2022 4:08 PM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] About to have fiber internet and need VPN info > >On Monday, 8 August 2022 17:25:08 BST Laurence Perkins wrote: > >&

RE: [gentoo-user] About to have fiber internet and need VPN info

2022-08-08 Thread Laurence Perkins
>-Original Message- >From: Michael >Sent: Saturday, August 6, 2022 1:32 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] About to have fiber internet and need VPN info > >On Saturday, 6 August 2022 07:07:26 BST Dale wrote: >> Michael wrote: >> > All connections to banks ar

RE: [gentoo-user] About to have fiber internet and need VPN info

2022-08-08 Thread Laurence Perkins
> -Original Message- > From: Peter Humphrey > Sent: Friday, August 5, 2022 4:36 PM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] About to have fiber internet and need VPN info > > On Saturday, 6 August 2022 00:05:20 BST Wol wrote: > > On

RE: [gentoo-user] About to have fiber internet and need VPN info

2022-08-08 Thread Laurence Perkins
>-Original Message- >From: Wol >Sent: Friday, August 5, 2022 4:05 PM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] About to have fiber internet and need VPN info > >On 05/08/2022 15:53, Laurence Perkins wrote: >> Oh, and note that if your ISP

RE: [gentoo-user] About to have fiber internet and need VPN info

2022-08-05 Thread Laurence Perkins
> -Original Message- > From: Dale > Sent: Thursday, August 4, 2022 3:32 PM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] About to have fiber internet and need VPN info > > Dale wrote: > > Howdy, > > > > Fiber internet is right around the corner. Some neighbors are alre

RE: [gentoo-user] Is it possible to make Gentoo LiveGUI ISO image GUI environment look like Windows 10/11?

2022-08-05 Thread Laurence Perkins
> > > -Original Message- > From: Turritopsis Dohrnii Teo En Ming > Sent: Friday, August 5, 2022 12:51 AM > To: gentoo-user@lists.gentoo.org > Cc: c...@teo-en-ming-corp.com > Subject: Re: [gentoo-user] Is it possible to make Gentoo LiveGUI ISO image > GUI environment look like Windows 1

RE: [gentoo-user] gcc 12.1.1 compile error on loongson2f Yeeloong

2022-07-29 Thread Laurence Perkins
Turning on zswap or, better yet, setting up a zram swap with a file to back it helps quite a bit on swapping since a lot of the data in question is highly compressible. Additionally, disable the "pipe" compiler option in make.conf so that it writes intermediate files out to disk instead of tryi

RE: [gentoo-user] MAC whitelisting and UDP traffic.

2022-07-14 Thread Laurence Perkins
listing and UDP traffic. >> >> >> On Tue, Jul 12, 2022 at 7:35 AM Laurence Perkins >> lperk...@openeye.net<mailto:lperk...@openeye.net> wrote: >> Ok, I asked a while ago about whitelisting MAC ranges for firewall rules, >> and just so you know, adding 16 mill

[gentoo-user] MAC whitelisting and UDP traffic.

2022-07-11 Thread Laurence Perkins
Ok, I asked a while ago about whitelisting MAC ranges for firewall rules, and just so you know, adding 16 million potential MAC addresses to the firewall... Doesn't work well... No matter how you do it. So I had to write a daemon to monitor which ones were local and add just those. Whatever.

RE: [gentoo-user] continuing an emerge

2022-07-07 Thread Laurence Perkins
> > > -Original Message- > From: Neil Bothwick > Sent: Wednesday, July 6, 2022 7:05 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] continuing an emerge > > On Wed, 6 Jul 2022 15:48:04 +0200 (CEST), k...@aspodata.se wrote: > > > With nodejs, I get: > > > > /usr/li

RE: [gentoo-user] pain, PAIN, and more pain again.

2022-06-20 Thread Laurence Perkins
I know how it goes. But do be fair, it was the motherboard manufacturers who changed how the boot process works, not the penguins. 😉 The penguins are just trying to adapt to it. I'm not sure where your problems are coming from. I use CUPS by IP address in my setup. You just need to also us

RE: [gentoo-user] Reinstall

2022-06-20 Thread Laurence Perkins
Be careful about the binpackages if you add any instruction set optimizations to your make.conf. Trying to install incompatible binaries will wreck your whole day. Otherwise, I usually just save the world file and any USE flags that I remember setting on purpose. Save copies of the keywords a

RE: [gentoo-user] netfilter partial MAC filtering

2022-06-17 Thread Laurence Perkins
> -Original Message- > From: Samuraiii > Sent: Thursday, June 16, 2022 9:48 PM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] netfilter partial MAC filtering > > On Fri, 2022-06-17 at 01:32 +0000, Laurence Perkins wrote: > > I am designing a

[gentoo-user] netfilter partial MAC filtering

2022-06-16 Thread Laurence Perkins
I am designing a small system with a switch and an uplink. It needs to be able to forward traffic from trusted, and only trusted, devices connected to the switch out through the uplink. Since all potential trusted devices will have the same MAC OUI prefix in this case, the immediately obvious

RE: [Possible Malware Fraud]Re: [gentoo-user] PySimpleBuild + MariaDB C Client

2022-06-13 Thread Laurence Perkins
Xbx shows up every once in a while, seems to be a young kid who doesn’t read English terribly well or know how mailing lists work and isn’t subscribed so doesn’t get list replies. The couple I’ve picked apart didn’t seem malicious, just not actually necessary or particularly useful. But I’d ha

RE: [gentoo-user] Re: Searching the list archives

2022-06-13 Thread Laurence Perkins
>-Original Message- >From: Peter Humphrey >Sent: Sunday, June 12, 2022 2:17 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] Re: Searching the list archives > >On Sunday, 12 June 2022 09:04:30 BST Nuno Silva wrote: >> On 2022-06-12, Peter Humphrey wrote: >> > Hello list

RE: [gentoo-user] *sob*

2022-06-13 Thread Laurence Perkins
>-Original Message- >From: Neil Bothwick >Sent: Sunday, June 12, 2022 4:28 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] *sob* > >On Sun, 12 Jun 2022 00:42:56 -0400, Alan Grimes wrote: > >> All of the followning statemens are true: >> >> 1. I am never not running

RE: [gentoo-user] chromium shortcuts?

2022-05-31 Thread Laurence Perkins
Compile time for Chromium currently seems to run about four hours on an i7-9700. -Original Message- From: Jorge Almeida Sent: Sunday, May 29, 2022 2:26 PM To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] chromium shortcuts? On Sun, May 29, 2022 at 10:16 PM w...@op.pl wrote:

RE: [gentoo-user] Reinstall

2022-05-11 Thread Laurence Perkins
> -Original Message- > From: Neil Bothwick > Sent: Wednesday, May 11, 2022 11:35 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Reinstall > > On Wed, 11 May 2022 16:45:31 +0000, Laurence Perkins wrote: > > > Alternatively, fully updat

RE: [gentoo-user] Reinstall

2022-05-11 Thread Laurence Perkins
And sometimes if you use --binpkg-respect-use=n and/or --with-bdeps=n you can jostle it into using more of the binaries on both passes. Additionally, you can use the ebuild command directly to force it to just install things without checking all the dependencies, that's sometimes handy for brea

RE: [gentoo-user] doing gentoo install disrupted

2022-04-14 Thread Laurence Perkins
> -Original Message- > From: Dale > Sent: Thursday, April 14, 2022 8:29 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] doing gentoo install disrupted > > Jude DaShiell wrote: > > I got down to emerge-webrsync and discovered an error in > > portage/make.conf on line

RE: [gentoo-user] Hard drive error from SMART

2022-04-12 Thread Laurence Perkins
>-Original Message- >From: Wol >Sent: Tuesday, April 12, 2022 2:51 PM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] Hard drive error from SMART > >On 12/04/2022 20:41, Laurence Perkins wrote: >> LVM is good for being able to swap out drives

RE: [gentoo-user] Hard drive error from SMART

2022-04-12 Thread Laurence Perkins
>-Original Message- >From: Dale >Sent: Tuesday, April 12, 2022 11:22 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] Hard drive error from SMART > >Laurence Perkins wrote: >>> -Original Message- >>> From: Dale >>&g

RE: [gentoo-user] Hard drive error from SMART

2022-04-12 Thread Laurence Perkins
> -Original Message- > From: Frank Steinmetzger > Sent: Tuesday, April 12, 2022 10:39 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Hard drive error from SMART > > > I actually developed a tool for that. It creates and checks md5 checksums > recursively and *per

RE: [gentoo-user] Hard drive error from SMART

2022-04-12 Thread Laurence Perkins
> -Original Message- > From: Dale > Sent: Tuesday, April 12, 2022 10:08 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] Hard drive error from SMART > > Rich Freeman wrote: > > On Mon, Apr 11, 2022 at 9:27 PM Dale wrote: > >> Thoughts. Replace as soon as drive arrives

RE: [gentoo-user] Hard drive error from SMART

2022-04-12 Thread Laurence Perkins
> -Original Message- > From: Dale > Sent: Monday, April 11, 2022 6:28 PM > To: gentoo-user@lists.gentoo.org > Subject: [gentoo-user] Hard drive error from SMART > > Given the low number and it showing it corrected that error, and then passed > a short and long test, is this drive "saf

RE: [gentoo-user] LVM and moving things around

2022-04-05 Thread Laurence Perkins
> -Original Message- > From: Rich Freeman > Sent: Tuesday, April 5, 2022 11:59 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] LVM and moving things around > > On Tue, Apr 5, 2022 at 11:10 AM Wols Lists wrote: > > > > I don't know how you take advantage of it, but li

RE: [SUSPECTED SPAM] Re: [gentoo-user] Choose a wireless access point

2022-04-05 Thread Laurence Perkins
> -Original Message- > From: William Kenworthy > Sent: Monday, April 4, 2022 8:05 PM > To: gentoo-user@lists.gentoo.org > Subject: [SUSPECTED SPAM] Re: [gentoo-user] Choose a wireless access point > > > On 4/4/22 23:12, Jack wrote: > > On 4/4/22 01:31, William Kenworthy wrote: > >> Is t

RE: [gentoo-user] LVM and moving things around

2022-04-05 Thread Laurence Perkins
>-Original Message- >From: Dale >Sent: Monday, April 4, 2022 4:37 PM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] LVM and moving things around > > >One thing that annoys me, it trying to use swap. I don't want to disable it >because on occasion Firefox goes nuts and st

RE: [gentoo-user] LVM and moving things around

2022-04-04 Thread Laurence Perkins
> -Original Message- > From: Dale > Sent: Monday, April 4, 2022 5:42 AM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] LVM and moving things around > > Bill Kenworthy wrote: > > Rsync has a bwlimit argument which helps here. Note that rsync copies > > the whole file on

RE: [gentoo-user] Sound not sounding

2022-03-24 Thread Laurence Perkins
> -Original Message- > From: Mark Knecht > Sent: Wednesday, March 23, 2022 3:14 PM > To: Gentoo User > Subject: Re: [gentoo-user] Sound not sounding > > On Wed, Mar 23, 2022 at 3:05 PM Wol wrote: > > > > On 23/03/2022 20:31, Mark Knecht wrote: > > Yeah, ain't that the truth! I'd li

RE: [gentoo-user] How to run X11 apps remotely?

2022-03-22 Thread Laurence Perkins
>-Original Message- >From: Grant Edwards >Sent: Tuesday, March 22, 2022 9:42 AM >To: gentoo-user@lists.gentoo.org >Subject: [gentoo-user] How to run X11 apps remotely? > >CAUTION: This is an EXTERNAL email. Do not click links or open attachments >unless you recognize the sender and know

RE: [gentoo-user] KDE, sddm etc security. Plus LVM question.

2022-03-22 Thread Laurence Perkins
> -Original Message- > From: Rich Freeman > Sent: Monday, March 21, 2022 5:21 PM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] KDE, sddm etc security. Plus LVM question. > > On Mon, Mar 21, 2022 at 8:03 PM Laurence Perkins wrote: > > &g

RE: [gentoo-user] KDE, sddm etc security. Plus LVM question.

2022-03-21 Thread Laurence Perkins
>-Original Message- >From: Rich Freeman >Sent: Monday, March 21, 2022 1:08 PM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] KDE, sddm etc security. Plus LVM question. > >On Mon, Mar 21, 2022 at 2:30 PM Laurence Perkins wrote: >> >> Havi

RE: [gentoo-user] KDE, sddm etc security. Plus LVM question.

2022-03-21 Thread Laurence Perkins
>-Original Message- >From: Rich Freeman >Sent: Monday, March 21, 2022 11:07 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] KDE, sddm etc security. Plus LVM question. > >On Mon, Mar 21, 2022 at 12:17 PM Laurence Perkins wrote: >> >>

RE: [gentoo-user] KDE, sddm etc security. Plus LVM question.

2022-03-21 Thread Laurence Perkins
>> >> >>-Original Message- >>From: Rich Freeman >>Sent: Sunday, March 20, 2022 11:03 AM >>To: gentoo-user@lists.gentoo.org >>Subject: Re: [gentoo-user] KDE, sddm etc security. Plus LVM question. >> >>On Sun, Mar 20, 2022 at 12:05 PM Daniel Frey wrote: >>> >>> They don't even need to defe

RE: [gentoo-user] Any way to run multiple commands from single script in parallel?

2022-03-14 Thread Laurence Perkins
If you don't want to do thread management yourself in bash then you can use something like GNU Parallel (in the repo) to handle forking and collating processes for you. Parallel in particular has the additional advantage that it's capable of shipping tasks off to other machines via SSH, so if y

RE: [gentoo-user] Re: Root can't write to files owned by others?

2022-03-11 Thread Laurence Perkins
>-Original Message- >From: Neil Bothwick >Sent: Friday, March 11, 2022 6:59 AM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] Re: Root can't write to files owned by others? > >On Fri, 11 Mar 2022 12:38:48 +0100, Dr Rainer Woitok wrote: > >> No. My "/tmp/" directory is no

RE: [gentoo-user] Re: Root can't write to files owned by others?

2022-03-10 Thread Laurence Perkins
> > >-Original Message- >From: Dr Rainer Woitok >Sent: Thursday, March 10, 2022 9:51 AM >To: gentoo-user@lists.gentoo.org; Nikos Chantziaras >Subject: [gentoo-user] Re: Root can't write to files owned by others? > >Nikos, > >On Thursday, 2022-03-10 12:21:36 +0200, you wrote: > >> ... >>

RE: [gentoo-user] Re: Root can't write to files owned by others?

2022-03-10 Thread Laurence Perkins
>On 09/03/2022 20:28, Dr Rainer Woitok wrote: >> until recently my system behaves sort of strangely: >> >> $ echo x | sudo tee /tmp/file >> Password: >> tee: /tmp/file: Permission denied >> [...] >> >> Since when can't root write to files it doesn't own? And not even, if >> the

RE: [gentoo-user] planning a new machine : comments welcome

2022-03-04 Thread Laurence Perkins
> > >-Original Message- >From: Wols Lists >Sent: Friday, March 4, 2022 1:51 PM >To: gentoo-user@lists.gentoo.org >Subject: Re: [gentoo-user] planning a new machine : comments welcome > >On 04/03/2022 21:18, Laurence Perkins wrote: >> I’d probably wait

RE: [gentoo-user] planning a new machine : comments welcome

2022-03-04 Thread Laurence Perkins
There’s nothing actually wrong conceptually with SMR drives in RAID. The write order used by the RAID system simply needs to be appropriate for such a drive. The early SMR drives tried to hide what they were, and simply didn’t have sufficient cache area for non-sequential workloads in any volu

RE: [gentoo-user] planning a new machine : comments welcome

2022-03-03 Thread Laurence Perkins
> > > -Original Message- > From: Dale > Sent: Wednesday, March 2, 2022 5:08 PM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] planning a new machine : comments welcome > > Laurence Perkins wrote: > > With regard to SMR drives, note

  1   2   >