[Bug 111018] Monitor goes to sleep and does not get up
Public bug reported: When my computer is iddle for some time, my monitor goes to sleep (even if I have told Ubuntu not to put it to sleep). Then I can still listen to music and shut down the computer, but my monitor will not recover even if I press keys, move the mouse, etc (it still sleeps). I have tried 2 other monitors and the same thing happens. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- Monitor goes to sleep and does not get up https://bugs.launchpad.net/bugs/111018 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 112590] no internet connection until I restart router
Public bug reported: Hello. Everytime I boot Ubuntu I have to restart my ADSL router in order to get internet connection. The internet works if I boot windows, so it is an Ubuntu issue. I am using Ubuntu Feisty Fawn 7.04. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- no internet connection until I restart router https://bugs.launchpad.net/bugs/112590 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 112590] Re: no internet connection until I restart router
Actually it's not the router. If I restart networking it works. When I type "sudo /etc/init.d/networking restart" I get this $ sudo /etc/init.d/networking restart Password: * Reconfiguring network interfaces... eth2: ERROR while getting interface flags: No such device There is already a pid file /var/run/dhclient.eth2.pid with pid 134993416 Internet Systems Consortium DHCP Client V3.0.4 Copyright 2004-2006 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ SIOCSIFADDR: No such device eth2: ERROR while getting interface flags: No such device eth2: ERROR while getting interface flags: No such device Bind socket to interface: No such device Failed to bring up eth2. ath0: ERROR while getting interface flags: No such device There is already a pid file /var/run/dhclient.ath0.pid with pid 134993416 Internet Systems Consortium DHCP Client V3.0.4 Copyright 2004-2006 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ SIOCSIFADDR: No such device ath0: ERROR while getting interface flags: No such device ath0: ERROR while getting interface flags: No such device Bind socket to interface: No such device Failed to bring up ath0. wlan0: ERROR while getting interface flags: No such device There is already a pid file /var/run/dhclient.wlan0.pid with pid 134993416 Internet Systems Consortium DHCP Client V3.0.4 Copyright 2004-2006 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ SIOCSIFADDR: No such device wlan0: ERROR while getting interface flags: No such device wlan0: ERROR while getting interface flags: No such device Bind socket to interface: No such device Failed to bring up wlan0. RTNETLINK answers: File exists run-parts: /etc/network/if-up.d/avahi-autoipd exited with return code 2 [ OK ] And the Internet starts working -- no internet connection until I restart router https://bugs.launchpad.net/bugs/112590 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8/9/10/11/12 does not boot
we already know that, but we want a fix to be included in the kernel -- modprobe abnormal exit - Kernel 2.6.20-8/9/10/11/12 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot
Same problem with Kernel 2.6.20-10 $uname -a 2.6.20-10-generic #2 SMP Mon Mar 12 00:02:49 UTC 2007 i686 GNU/Linux Still can't boot with JMicron Controller enabled. -- modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot
Booting with acpi=off does not fix the issue. Still having the same problem. -- modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8/9/10 does not boot
** Summary changed: - modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot + modprobe abnormal exit - Kernel 2.6.20-8/9/10 does not boot ** Description changed: Today I did a dist-upgrade and it downloaded many things, included the new Kernel 2.6.20-8 and installed them correctly. I am currently using the previous kernel version (2.6.20-6). Since today everything had worked fine, but now when grub loads, I select the latest Kernel and the bootslplash appears, the progressbar does not make any progress. If I press Ctrl+Alt+F4 I see the message: run_progess `/sbin/modprobe` abnormal exit EDIT: Same bug in the new Kernel (2.6.20-9) + EDIT2: Same bug in the new Kernel (2.6.20-10) -- modprobe abnormal exit - Kernel 2.6.20-8/9/10 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85875] Re: When modifying the volume with the keyboard, Ubuntu sometimes freezes
It does not freeze anymore! Good thing. But when volume reaches 0 (quiet), I cannot increase it with the keyboard, I have to do it manually. -- When modifying the volume with the keyboard, Ubuntu sometimes freezes https://launchpad.net/bugs/85875 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85875] Re: When modifying the volume with the keyboard, Ubuntu sometimes freezes
no errors there. Nothing new appears. -- When modifying the volume with the keyboard, Ubuntu sometimes freezes https://launchpad.net/bugs/85875 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8 does not boot
Same problem with the new Kernel 2.6.20-9, shall I report a new bug? -- modprobe abnormal exit - Kernel 2.6.20-8 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot
** Summary changed: - modprobe abnormal exit - Kernel 2.6.20-8 does not boot + modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot ** Description changed: Today I did a dist-upgrade and it downloaded many things, included the new Kernel 2.6.20-8 and installed them correctly. I am currently using the previous kernel version (2.6.20-6). Since today everything had worked fine, but now when grub loads, I select the latest Kernel and the bootslplash appears, the progressbar does not make any progress. If I press Ctrl+Alt+F4 I see the message: run_progess `/sbin/modprobe` abnormal exit + + EDIT: Same bug in the new Kernel (2.6.20-9) -- modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85875] Re: When modifying the volume with the keyboard, Ubuntu sometimes freezes
Fixed in last update. Now there is no problem nor modifying the volume nor sometimes freezing. -- When modifying the volume with the keyboard, Ubuntu sometimes freezes https://launchpad.net/bugs/85875 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89037] Ubuntu crashes when closing firefox and flashplugin
Public bug reported: Binary package hint: flashplugin-nonfree When I am watching a video on, for example, youtube, if I close the firefox window, EVERYTHING freezes and I have to restart X. I am using Ubuntu Feisty Fawn Herd 4. ** Affects: flashplugin-nonfree (Ubuntu) Importance: Undecided Status: Unconfirmed -- Ubuntu crashes when closing firefox and flashplugin https://launchpad.net/bugs/89037 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89037] Re: Ubuntu crashes when closing firefox and flashplugin
** Description changed: Binary package hint: flashplugin-nonfree - When I am watching a video on, for example, youtube, if I close the - firefox window, EVERYTHING freezes and I have to restart X. I am using - Ubuntu Feisty Fawn Herd 4. + When I am watching a flash video on, for example, youtube, if I close + the firefox window, EVERYTHING freezes and I have to restart X. I am + using Ubuntu Feisty Fawn Herd 4 and latest Firefox release, 2.0.0.2. -- Ubuntu crashes when closing firefox and flashplugin https://launchpad.net/bugs/89037 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot
I have got P5b mobo and E6600 as well. With Herd5, nothing has changed. If I disable JMicron Controller, it boots, if I don't, it doesn't boot. Nothing new. -- modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot
adding irqpoll option did not do anything for me. Still freezing. -- modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot
I do not know your criteria for setting what the importance of a bug is. What I know is that a _huge_ amount of people are having this problem and cannot boot. I usually write in the ubuntu forums, and there are _A LOT_ of posts related to this issue. Shouldn't this bug be assigned as _CRITICAL_? I am just telling what my opinion is, but this issue has meant an exceptionally important regression for Ubuntu. -- modprobe abnormal exit - Kernel 2.6.20-8/9 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 90099] Ubuntu freezes when clicking OpenOffice.org Impress' "Presentation" button
Public bug reported: Binary package hint: openoffice.org I am using Ubuntu Feisty Fawn Herd 5. When I open OpenOffice.org Impress and click in the "Presentation" button, Ubuntu freezes and I cannot do anything. ProblemType: Bug Architecture: i386 Date: Tue Mar 6 13:48:42 2007 DistroRelease: Ubuntu 7.04 Uname: Linux HIGILINUX 2.6.20-9-generic #2 SMP Mon Feb 26 03:01:44 UTC 2007 i686 GNU/Linux ** Affects: openoffice.org (Ubuntu) Importance: Undecided Status: Unconfirmed -- Ubuntu freezes when clicking OpenOffice.org Impress' "Presentation" button https://launchpad.net/bugs/90099 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 92272] [apport] alacarte crashed with IOError in save()
Public bug reported: Binary package hint: alacarte I am using Feisty. This has been happening to me since Herd1. Everytime I right click on the menus and select "Edit the menus" I get this error. I can open alacarte through the terminal without problems. ProblemType: Crash Architecture: i386 Date: Wed Mar 14 17:00:38 2007 DistroRelease: Ubuntu 7.04 ExecutablePath: /usr/bin/alacarte InterpreterPath: /usr/bin/python2.5 Package: alacarte 0.11.3-0ubuntu1 PackageArchitecture: all ProcCmdline: /usr/bin/python -OOt /usr/bin/alacarte ProcCwd: /home/higi ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games LANG=es_ES.UTF-8 SHELL=/bin/bash PythonArgs: ['/usr/bin/alacarte'] SourcePackage: alacarte Uname: Linux HIGILINUX 2.6.20-10-generic #2 SMP Mon Mar 12 00:02:49 UTC 2007 i686 GNU/Linux ** Affects: alacarte (Ubuntu) Importance: Undecided Status: Unconfirmed -- [apport] alacarte crashed with IOError in save() https://launchpad.net/bugs/92272 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 92272] Re: [apport] alacarte crashed with IOError in save()
** Attachment added: "Dependencies.txt" http://librarian.launchpad.net/6804515/Dependencies.txt ** Attachment added: "ProcMaps.txt" http://librarian.launchpad.net/6804544/ProcMaps.txt ** Attachment added: "ProcStatus.txt" http://librarian.launchpad.net/6804551/ProcStatus.txt ** Attachment added: "Traceback.txt" http://librarian.launchpad.net/6804560/Traceback.txt ** Description changed: Binary package hint: alacarte I am using Feisty. This has been happening to me since Herd1. Everytime - I right click on the menus and click "Edit the menus" I get this error. + I right click on the menus and select "Edit the menus" I get this error. I can open alacarte through the terminal without problems. ProblemType: Crash Architecture: i386 Date: Wed Mar 14 17:00:38 2007 DistroRelease: Ubuntu 7.04 ExecutablePath: /usr/bin/alacarte InterpreterPath: /usr/bin/python2.5 Package: alacarte 0.11.3-0ubuntu1 PackageArchitecture: all ProcCmdline: /usr/bin/python -OOt /usr/bin/alacarte ProcCwd: /home/higi ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games LANG=es_ES.UTF-8 SHELL=/bin/bash PythonArgs: ['/usr/bin/alacarte'] SourcePackage: alacarte Uname: Linux HIGILINUX 2.6.20-10-generic #2 SMP Mon Mar 12 00:02:49 UTC 2007 i686 GNU/Linux -- [apport] alacarte crashed with IOError in save() https://launchpad.net/bugs/92272 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8/9/10 does not boot
Oh, this actually fixes the problem ** Attachment added: "Here's my output of lspci -vvn" http://librarian.launchpad.net/6804660/output -- modprobe abnormal exit - Kernel 2.6.20-8/9/10 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8/9/10 does not boot
Adding combined_mode=libdata to the booting parameters of the kernel in grub: With the initramfs workaround, the kernel booted normally... Without the intramfs workaround, the kernel did not boot. -- modprobe abnormal exit - Kernel 2.6.20-8/9/10 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 92433] Re: The newest splash is quite phallic...
I can reproduce this bug. -- The newest splash is quite phallic... https://launchpad.net/bugs/92433 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8/9/10/11 does not boot
Same exact bug in 2.6.20-11 kernel ** Description changed: Today I did a dist-upgrade and it downloaded many things, included the new Kernel 2.6.20-8 and installed them correctly. I am currently using the previous kernel version (2.6.20-6). Since today everything had worked fine, but now when grub loads, I select the latest Kernel and the bootslplash appears, the progressbar does not make any progress. If I press Ctrl+Alt+F4 I see the message: run_progess `/sbin/modprobe` abnormal exit EDIT: Same bug in the new Kernel (2.6.20-9) EDIT2: Same bug in the new Kernel (2.6.20-10) + EDIT3: Same bug in the new Kernel (2.6.20-11) -- modprobe abnormal exit - Kernel 2.6.20-8/9/10/11 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89037] Re: Ubuntu crashes when closing firefox and flashplugin
I, and more people, are STILL able to reproduce this bug. -- Ubuntu crashes when closing firefox and flashplugin https://launchpad.net/bugs/89037 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89037] Re: Ubuntu crashes when closing firefox and flashplugin
The thing is that when firefox crashes, it crashes with the whole desktop, so I have to go to a virtual terminal and restart GDM. Is there any file that contains the bug report? -- Ubuntu crashes when closing firefox and flashplugin https://launchpad.net/bugs/89037 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 93354] Ubuntu Feisty freezes when changing resolution
Public bug reported: I am using Ubuntu Feisty Fawn Herd 5. When I change resolution, I get a black screen and I cannot do anything (can't go to virtual terminal...), so the only thing I can do is restart my computer with the power button. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- Ubuntu Feisty freezes when changing resolution https://launchpad.net/bugs/93354 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89037] Re: Ubuntu crashes when closing firefox and flashplugin
Here it is. ** Attachment added: "Firefox crash report" http://librarian.launchpad.net/6851033/_usr_lib_firefox_firefox-bin.1000.crash -- Ubuntu crashes when closing firefox and flashplugin https://launchpad.net/bugs/89037 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8/9/10/11 does not boot
I can still reproduce the bug in 2.6.20-12 kernel. ** Description changed: Today I did a dist-upgrade and it downloaded many things, included the new Kernel 2.6.20-8 and installed them correctly. I am currently using the previous kernel version (2.6.20-6). Since today everything had worked fine, but now when grub loads, I select the latest Kernel and the bootslplash appears, the progressbar does not make any progress. If I press Ctrl+Alt+F4 I see the message: run_progess `/sbin/modprobe` abnormal exit EDIT: Same bug in the new Kernel (2.6.20-9) EDIT2: Same bug in the new Kernel (2.6.20-10) EDIT3: Same bug in the new Kernel (2.6.20-11) + EDIT3: Same bug in the new Kernel (2.6.20-12) ** Summary changed: - modprobe abnormal exit - Kernel 2.6.20-8/9/10/11 does not boot + modprobe abnormal exit - Kernel 2.6.20-8/9/10/11/12 does not boot -- modprobe abnormal exit - Kernel 2.6.20-8/9/10/11/12 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 93354] Re: Ubuntu Feisty freezes when changing resolution
Here's my xorg.conf ** Attachment added: "xorg.conf file" http://librarian.launchpad.net/6851649/xorg.conf -- Ubuntu Feisty freezes when changing resolution https://launchpad.net/bugs/93354 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 93354] Re: Ubuntu Feisty freezes when changing resolution
Here's what I get with lspci ** Attachment added: "lspci" http://librarian.launchpad.net/6851653/lspci -- Ubuntu Feisty freezes when changing resolution https://launchpad.net/bugs/93354 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: Crash from ide_pci from generic.ko for jmicron controllers
i cannot reproduce the bug anymore with linux-image-2.6.20-13-generic. Fixed. -- Crash from ide_pci from generic.ko for jmicron controllers https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: modprobe abnormal exit - Kernel 2.6.20-8/9/10/11/12 does not boot
Thomas Hotz: Sorry for the delay, but I didn't have time to test it before. Latest daily build does not fix anything for me. -- modprobe abnormal exit - Kernel 2.6.20-8/9/10/11/12 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: Crash from ide_pci from generic.ko for jmicron controllers
Mr. Collins: I have just done what you said. I got the following. [1.716365] [] generic_init_one+0x0/0xc0 [generic] [1.716427] [] pci_device_probe+0x56/0x80 [1.716488] [] really_probe+0x66/0x190 [1.716549] [] driver_probe_device+0x49/0xc0 [1.716675] [] sys_init_module+0x15d/0x1ba0 [1.717039] [] sys_mmap2+0xcd/0xd0 [1.717100] [] syscall_call+0x7/0xb [1.717161] [] secpath_dup++0x13/0x80 [1.717222] == [1.717256] code: fd ff c6 03 25 e9 1b fd ff ff 8d 4f 04 89 4c 24 50 8b 3f 81 ff ff 0f 00 00 77 05 bf g9 fb 36 c0 8b 54 24 2c 89 f9 89 c8 eb 06 <80> 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 89 c6 8b 44 24 28 f6 [1.718909] EIP: [] vsnprintf+0x44c/0x5f0 SS:ESP 0068:dfba5cdc [1.718999] udevd_event[2009]: run_program: '/sbin/modprobe' abnormal exit <7>ieee1394: Initialized config rom entry 'ip1394' [1.724869] USB Universal Host Controller Interface v3.0 [1.745417] Floppy drive(s): fd0 is 1.44M [1.766607] FDC 0 is a post-1991 82077 (after a while, the following appeared) Check root = bootarg cat /proc/cmdline or missing modules, devices: cat /proc/modules ls /dev ALERT! /dev/disk/by-uuid/63ce603f-9cc1-41f5-96ac-d2515462fb72 does not exist. Dropping to shell! Busy Box v1.1.3 (Debian 1:1.1.3-3ubuntu3) Built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off (intramfs) -- Crash from ide_pci from generic.ko for jmicron controllers https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84359] JMicron 20360/20363 AHCI Controller (rev 02)
Public bug reported: When I boot Ubuntu, I get the following warning: "Cannot allocate resource region of device 3.00.0" If I look at that device, I see it is: 03:00.0 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) I am using Ubuntu Feisty Fawn but this is happening to me since Ubuntu Dapper. ProblemType: Bug Date: Sat Feb 10 12:40:09 2007 DistroRelease: Ubuntu 7.04 Uname: Linux HIGILINUX 2.6.20-6-generic #2 SMP Wed Jan 31 20:53:39 UTC 2007 i686 GNU/Linux ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- JMicron 20360/20363 AHCI Controller (rev 02) https://launchpad.net/bugs/84359 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 84359] Re: JMicron 20360/20363 AHCI Controller (rev 02)
Hello, could you please tell me how do I add something to my bug report? I cannot find the way to do it. Thank you. 2007/2/12, Brian Murray <[EMAIL PROTECTED]>: > > Thanks for your bug report. Could you please add the output of 'lspci > -vvnn' and 'dmesg' to your bug report? > > ** Changed in: Ubuntu > Assignee: (unassigned) => Brian Murray >Status: Unconfirmed => Needs Info > > -- > JMicron 20360/20363 AHCI Controller (rev 02) > https://launchpad.net/bugs/84359 > -- JMicron 20360/20363 AHCI Controller (rev 02) https://launchpad.net/bugs/84359 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Kernel 2.6.20-8 does not boot
Public bug reported: Today I did a dist-upgrade and it downloaded many things, included the new Kernel 2.6.20-8 and installed them correctly. I am currently using the previous kernel version (2.6.20-6). Since today everything had worked fine, but now when grub loads, I select the latest Kernel and the bootslplash appears, the progressbar does not make any progress. If I press Ctrl+Alt+F4 I see the message: run_progess `/sbin/modprobe` abnormal exit ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- Kernel 2.6.20-8 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84359] Re: JMicron 20360/20363 AHCI Controller (rev 02)
Posting output of 'lspci -vvnn' and 'dmesg' [EMAIL PROTECTED]:~$ lspci -vvnn 00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ea] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port [8086:29a1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 [8086:2834] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ec] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 [8086:2830] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ec] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller [8086:2820] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ec] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ec] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- 01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 7900 GS [10de:0292] (rev a1) (prog-if 00 [VGA]) Subsystem: XFX Pine Group Inc. Unknown device [1682:2218] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. Unknown device
[Bug 84964] Re: Kernel 2.6.20-8 does not boot
I did that and now I can see the whole error message: [1.979033] udevd-event [2023]: run_program: '/sbin/modprobe' abnormal exit -- Kernel 2.6.20-8 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: Kernel 2.6.20-8 does not boot
more people in ubuntuforums seems to be having a similar problem. Do you need more information? http://ubuntuforums.org/showthread.php?t=361007 -- Kernel 2.6.20-8 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85772] Firefox cannot read Feeds anymore
Public bug reported: Binary package hint: firefox Firefox in Feisty (2.0.0.1) cannot see Feeds anymore. It loads the Feed page but it cannot read the content of it. Here is an example: http://www.hispageek.net/imagenes/feed.jpg I have tried in many Feeds and Firefox does not work in any of them. ** Affects: firefox (Ubuntu) Importance: Undecided Status: Unconfirmed -- Firefox cannot read Feeds anymore https://launchpad.net/bugs/85772 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85772] Re: Firefox cannot read Feeds anymore
Sure:Feeds: http://google.dirson.com/rss.php http://www.hispageek.net/feed http://feeds.feedburner.com/NetvibesDevBlog - $ sudo apt-cache policy firefox Password: firefox: Installed: 2.0.0.1+1-0ubuntu1 Candidate: 2.0.0.1+1-0ubuntu1 Version Table: *** 2.0.0.1+1-0ubuntu1 0 500 http://es.archive.ubuntu.com feisty/main Packages 100 /var/lib/dpkg/status [EMAIL PROTECTED]:~$ -- Firefox cannot read Feeds anymore https://launchpad.net/bugs/85772 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85875] When modifying the volume with the keyboard, Ubuntu sometimes freezes
Public bug reported: When I decrease/increase the volume via the keyboard, Ubuntu sometimes (very often) freezes. The music keeps going but I cannot do anything as its frozen. If I decrease/increase the volume through the volume icon on top right corner it works OK. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- When modifying the volume with the keyboard, Ubuntu sometimes freezes https://launchpad.net/bugs/85875 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: Kernel 2.6.20-8 does not boot
I have also got a S-ATA drive... I think this should be a critical bug as all the people with S-ATA drives cannot even boot. -- Kernel 2.6.20-8 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85483] Re: Feisty does not boot with second SATA disk attached
this could be related to this bug: https://launchpad.net/ubuntu/+source /linux-source-2.6.20/+bug/84964 (we all use S-ATA drives and cannot boot) -- Feisty does not boot with second SATA disk attached https://launchpad.net/bugs/85483 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: Kernel 2.6.20-8 does not boot
BTW, since Kernel 2.6.17 I get this warning message just after selecting the kernel I'm booting: "Cannot allocate resource region 2 of device 3.00.0 Cannot allocate resource region 3 of device 3.00.0" If I "lspci" that device is: 03:00.0 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) I think it is related to this bug. -- Kernel 2.6.20-8 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: Kernel 2.6.20-8 does not boot
Today I downloaded Xubuntu 7.04 Herd 4. While booting, I got exactly the same error followed by: "/bin/sh/: can't access tty; job control turned off." Hope it helps. -- Kernel 2.6.20-8 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: Kernel 2.6.20-8 does not boot
Yes! That's it. I turned off in the BIOS the JMicron SATA/PATA controller and now it works. I cannot use my CD/DVD-ROM now but can boot. -- Kernel 2.6.20-8 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85875] Re: When modifying the volume with the keyboard, Ubuntu sometimes freezes
I use Ubuntu 7.04 Herd 4. I do not use a composite manager. I use GNOME- Metacity. Yes, when it freezes I can yo to a command line. ( 2 ) By the way, when I decrease the volume until it reaches the minimum (silent) and does not freeze, I cannot increase it using the keyboard. I have to do it manually with gnome's the volume bar. I cannot find anything related to the problem in those files, neither reproduce the freeze. I can reproduce ( 2 ). -- When modifying the volume with the keyboard, Ubuntu sometimes freezes https://launchpad.net/bugs/85875 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: Kernel 2.6.20-8 does not boot
Sure. [EMAIL PROTECTED]:~$ dmesg [0.00] Linux version 2.6.20-8-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 20070129 (prerelease) (Ubuntu 4.1.1-31ubuntu2)) #2 SMP Tue Feb 13 05:18:42 UTC 2007 (Ubuntu 2.6.20-8.14-generic) [0.00] BIOS-provided physical RAM map: [0.00] sanitize start [0.00] sanitize end [0.00] copy_e820_map() start: size: 0009fc00 end: 0009fc00 type: 1 [0.00] copy_e820_map() type is E820_RAM [0.00] copy_e820_map() start: 0009fc00 size: 0400 end: 000a type: 2 [0.00] copy_e820_map() start: 000e4000 size: 0001c000 end: 0010 type: 2 [0.00] copy_e820_map() start: 0010 size: 7fea end: 7ffa type: 1 [0.00] copy_e820_map() type is E820_RAM [0.00] copy_e820_map() start: 7ffa size: e000 end: 7ffae000 type: 3 [0.00] copy_e820_map() start: 7ffae000 size: 00032000 end: 7ffe type: 4 [0.00] copy_e820_map() start: 7ffe size: 0002 end: 8000 type: 2 [0.00] copy_e820_map() start: fee0 size: 1000 end: fee01000 type: 2 [0.00] copy_e820_map() start: ffb0 size: 0050 end: 0001 type: 2 [0.00] BIOS-e820: - 0009fc00 (usable) [0.00] BIOS-e820: 0009fc00 - 000a (reserved) [0.00] BIOS-e820: 000e4000 - 0010 (reserved) [0.00] BIOS-e820: 0010 - 7ffa (usable) [0.00] BIOS-e820: 7ffa - 7ffae000 (ACPI data) [0.00] BIOS-e820: 7ffae000 - 7ffe (ACPI NVS) [0.00] BIOS-e820: 7ffe - 8000 (reserved) [0.00] BIOS-e820: fee0 - fee01000 (reserved) [0.00] BIOS-e820: ffb0 - 0001 (reserved) [0.00] 1151MB HIGHMEM available. [0.00] 896MB LOWMEM available. [0.00] found SMP MP-table at 000ff780 [0.00] Entering add_active_range(0, 0, 524192) 0 entries of 256 used [0.00] Zone PFN ranges: [0.00] DMA 0 -> 4096 [0.00] Normal 4096 -> 229376 [0.00] HighMem229376 -> 524192 [0.00] early_node_map[1] active PFN ranges [0.00] 0:0 -> 524192 [0.00] On node 0 totalpages: 524192 [0.00] DMA zone: 32 pages used for memmap [0.00] DMA zone: 0 pages reserved [0.00] DMA zone: 4064 pages, LIFO batch:0 [0.00] Normal zone: 1760 pages used for memmap [0.00] Normal zone: 223520 pages, LIFO batch:31 [0.00] HighMem zone: 2303 pages used for memmap [0.00] HighMem zone: 292513 pages, LIFO batch:31 [0.00] DMI 2.4 present. [0.00] ACPI: RSDP (v000 ACPIAM) @ 0x000fae40 [0.00] ACPI: RSDT (v001 A M I OEMRSDT 0x08000610 MSFT 0x0097) @ 0x7ffa [0.00] ACPI: FADT (v002 A M I OEMFACP 0x08000610 MSFT 0x0097) @ 0x7ffa0200 [0.00] ACPI: MADT (v001 A M I OEMAPIC 0x08000610 MSFT 0x0097) @ 0x7ffa0390 [0.00] ACPI: MCFG (v001 A M I OEMMCFG 0x08000610 MSFT 0x0097) @ 0x7ffa0400 [0.00] ACPI: OEMB (v001 A M I AMI_OEM 0x08000610 MSFT 0x0097) @ 0x7ffae040 [0.00] ACPI: DSDT (v001 A0483 A0483035 0x0035 INTL 0x20060113) @ 0x [0.00] ACPI: PM-Timer IO Port: 0x808 [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [0.00] Processor #0 6:15 APIC version 20 [0.00] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [0.00] Processor #1 6:15 APIC version 20 [0.00] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [0.00] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [0.00] ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0]) [0.00] IOAPIC[0]: apic_id 2, version 32, address 0xfec0, GSI 0-23 [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [0.00] ACPI: IRQ0 used by override. [0.00] ACPI: IRQ2 used by override. [0.00] ACPI: IRQ9 used by override. [0.00] Enabling APIC mode: Flat. Using 1 I/O APICs [0.00] Using ACPI (MADT) for SMP configuration information [0.00] Allocating PCI resources starting at 8800 (gap: 8000:7ee0) [0.00] Detected 2400.120 MHz processor. [ 20.824741] Built 1 zonelists. Total pages: 520097 [ 20.824743] Kernel command line: root=UUID=63ce603f-9cc1-41f5-96ac-d2515462fb72 ro quiet splash locale=es_ES [ 20.824850] mapped APIC to d000 (fee0
[Bug 84964] Re: Kernel 2.6.20-8 does not boot
I took last dmesg on Kernel 2.6.20-8 with JMicron Controller disabled. Do you need me to do it in Kernel 2.6.20-6 with JMicron Controller enabled? -- Kernel 2.6.20-8 does not boot https://launchpad.net/bugs/84964 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 84964] Re: Kernel 2.6.20-8 does not boot
[EMAIL PROTECTED]:~$ dmesg [0.00] Linux version 2.6.20-6-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 20070106 (prerelease) (Ubuntu 4.1.1-21ubuntu7)) #2 SMP Wed Jan 31 20:53:39 UTC 2007 (Ubuntu 2.6.20-6.11-generic) [0.00] BIOS-provided physical RAM map: [0.00] sanitize start [0.00] sanitize end [0.00] copy_e820_map() start: size: 0009fc00 end: 0009fc00 type: 1 [0.00] copy_e820_map() type is E820_RAM [0.00] copy_e820_map() start: 0009fc00 size: 0400 end: 000a type: 2 [0.00] copy_e820_map() start: 000e4000 size: 0001c000 end: 0010 type: 2 [0.00] copy_e820_map() start: 0010 size: 7fea end: 7ffa type: 1 [0.00] copy_e820_map() type is E820_RAM [0.00] copy_e820_map() start: 7ffa size: e000 end: 7ffae000 type: 3 [0.00] copy_e820_map() start: 7ffae000 size: 00032000 end: 7ffe type: 4 [0.00] copy_e820_map() start: 7ffe size: 0002 end: 8000 type: 2 [0.00] copy_e820_map() start: fee0 size: 1000 end: fee01000 type: 2 [0.00] copy_e820_map() start: ffb0 size: 0050 end: 0001 type: 2 [0.00] BIOS-e820: - 0009fc00 (usable) [0.00] BIOS-e820: 0009fc00 - 000a (reserved) [0.00] BIOS-e820: 000e4000 - 0010 (reserved) [0.00] BIOS-e820: 0010 - 7ffa (usable) [0.00] BIOS-e820: 7ffa - 7ffae000 (ACPI data) [0.00] BIOS-e820: 7ffae000 - 7ffe (ACPI NVS) [0.00] BIOS-e820: 7ffe - 8000 (reserved) [0.00] BIOS-e820: fee0 - fee01000 (reserved) [0.00] BIOS-e820: ffb0 - 0001 (reserved) [0.00] 1151MB HIGHMEM available. [0.00] 896MB LOWMEM available. [0.00] found SMP MP-table at 000ff780 [0.00] Entering add_active_range(0, 0, 524192) 0 entries of 256 used [0.00] Zone PFN ranges: [0.00] DMA 0 -> 4096 [0.00] Normal 4096 -> 229376 [0.00] HighMem229376 -> 524192 [0.00] early_node_map[1] active PFN ranges [0.00] 0:0 -> 524192 [0.00] On node 0 totalpages: 524192 [0.00] DMA zone: 32 pages used for memmap [0.00] DMA zone: 0 pages reserved [0.00] DMA zone: 4064 pages, LIFO batch:0 [0.00] Normal zone: 1760 pages used for memmap [0.00] Normal zone: 223520 pages, LIFO batch:31 [0.00] HighMem zone: 2303 pages used for memmap [0.00] HighMem zone: 292513 pages, LIFO batch:31 [0.00] DMI 2.4 present. [0.00] ACPI: RSDP (v000 ACPIAM) @ 0x000fae40 [0.00] ACPI: RSDT (v001 A M I OEMRSDT 0x08000610 MSFT 0x0097) @ 0x7ffa [0.00] ACPI: FADT (v002 A M I OEMFACP 0x08000610 MSFT 0x0097) @ 0x7ffa0200 [0.00] ACPI: MADT (v001 A M I OEMAPIC 0x08000610 MSFT 0x0097) @ 0x7ffa0390 [0.00] ACPI: MCFG (v001 A M I OEMMCFG 0x08000610 MSFT 0x0097) @ 0x7ffa0400 [0.00] ACPI: OEMB (v001 A M I AMI_OEM 0x08000610 MSFT 0x0097) @ 0x7ffae040 [0.00] ACPI: DSDT (v001 A0483 A0483035 0x0035 INTL 0x20060113) @ 0x [0.00] ACPI: PM-Timer IO Port: 0x808 [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [0.00] Processor #0 6:15 APIC version 20 [0.00] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [0.00] Processor #1 6:15 APIC version 20 [0.00] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [0.00] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [0.00] ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0]) [0.00] IOAPIC[0]: apic_id 2, version 32, address 0xfec0, GSI 0-23 [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [0.00] ACPI: IRQ0 used by override. [0.00] ACPI: IRQ2 used by override. [0.00] ACPI: IRQ9 used by override. [0.00] Enabling APIC mode: Flat. Using 1 I/O APICs [0.00] Using ACPI (MADT) for SMP configuration information [0.00] Allocating PCI resources starting at 8800 (gap: 8000:7ee0) [0.00] Detected 2400.157 MHz processor. [ 22.490552] Built 1 zonelists. Total pages: 520097 [ 22.490554] Kernel command line: root=UUID=63ce603f-9cc1-41f5-96ac-d2515462fb72 ro quiet splash locale=es_ES [ 22.490660] mapped APIC to d000 (fee0) [ 22
