[Bug 274863] Re: firefox crashed with SIGSEGV in g_closure_invoke()
** Changed in: firefox Importance: Undecided => Unknown Bugwatch: None => Mozilla Bugzilla #464637 Status: New => Unknown -- firefox crashed with SIGSEGV in g_closure_invoke() https://bugs.launchpad.net/bugs/274863 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 371109] [NEW] MCC doesn't set up bttv IR remote - should use dev/input
Public bug reported: Binary package hint: mythbuntu-control-centre I have a bttv card (Winfast 2000XP card=34) and chose the card in the drop-down list of remotes in Jaunty Mythbuntu. I thought this would set up the card, but it did not. I have now made this work and feel that the steps that I took could be automated (see my "Answer" at: https://answers.launchpad.net/mythbuntu/+question/54983 , made into a script and run whenever somebody chose this card from the list. $ grep -A 4 bttv /proc/bus/input/devices will give the input device at the end of the last line: N: Name="bttv IR (card=34)" P: Phys=pci-:03:07.0/ir0 S: Sysfs=/devices/pci:00/:00:14.4/:03:07.0/input/input6 U: Uniq= H: Handlers=kbd event6 Ship http://linux.bytesex.org/v4l2/linux-input-layer-lircd.conf with MCC and put it in /etc/lircd.conf at this stage. Then generate a *correct* /etc/lirc/hardware.conf to read: # /etc/lirc/hardware.conf # #Chosen Remote Control REMOTE="Winfast TV2000/XP (card" REMOTE_MODULES="bttv" REMOTE_DRIVER="dev/input" REMOTE_DEVICE="/dev/input/[EVENTNUM FROM ABOVE]" REMOTE_LIRCD_CONF="leadtek/lircd.conf.RM-0010" REMOTE_LIRCD_ARGS="" I'm happy to test any scripts that are proposed. The problem with a GUI that says it configures LIRC for the bttv remote is that you expect it to work when you select it. I was quite disappointed to have to figure it out for myself (by asking on the LIRC list). ** Affects: mythbuntu-control-centre (Ubuntu) Importance: Undecided Status: New -- MCC doesn't set up bttv IR remote - should use dev/input https://bugs.launchpad.net/bugs/371109 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 371109] Re: MCC doesn't set up bttv IR remote - should use dev/input
** Attachment added: "hardware.conf" http://launchpadlibrarian.net/26269811/hardware.conf -- MCC doesn't set up bttv IR remote - should use dev/input https://bugs.launchpad.net/bugs/371109 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 209076] Re: automount fails to recognize CD/DVDs in hfsplus format
I have this issue as well on Jaunty with a Windows-created UDF data DVD. This bug may be a duplicate of Bug #106910 . -- automount fails to recognize CD/DVDs in hfsplus format https://bugs.launchpad.net/bugs/209076 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 44233] Re: mount udf dvd fails, possible wrong fstab entry
See Bug #106910 -- mount udf dvd fails, possible wrong fstab entry https://bugs.launchpad.net/bugs/44233 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 106910] Re: Unable to mount Data DVD created under Windows XP or Vista that are in UDF format
I am getting this error in Jaunty. Same issue as Dylan - neither gnome- mount nor mounting from the command line works and the same output that he posted: $ sudo mount -t udf /dev/cdrom /media/dvd mount: block device /dev/sr0 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/sr0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so $ dmesg | tail [ 694.199488] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] [ 694.199501] Info fld=0x226200 [ 694.199505] sr 1:0:0:0: [sr0] Add. Sense: Unrecovered read error [ 694.199519] end_request: I/O error, dev sr0, sector 9013248 [ 694.199532] Buffer I/O error on device sr0, logical block 1126656 [ 695.212635] UDF-fs: No VRS found [ 695.571281] ISOFS: Unable to identify CD-ROM format. [ 907.787925] UDF-fs: No VRS found [ 952.829588] UDF-fs: No VRS found [ 953.147279] ISOFS: Unable to identify CD-ROM format. This is a UDF data DVD that works correctly in Windows. -- Unable to mount Data DVD created under Windows XP or Vista that are in UDF format https://bugs.launchpad.net/bugs/106910 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 293312] [NEW] [Intrepid][Regression] Rt61pci wireless stopped working between Beta and Final Live CDs
Public bug reported: This was working perfectly on Intrepid Beta and has regressed to not working when I try the Intrepid Final Live CD. Network-manager cannot connect to my access point, even when I disable all security (both MAC filtering and encryption - it is now completely open). I have no issues connecting with an IPW2200. When I put in the WPA2 AP passphrase, the icon spins for a while and then fails. Can anybody help me figure out where the issue is? The driver is "rt61pci". My lspci.txt [1.16 KiB] can be found in my earlier bug report (about Hardy) to the forums: http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=5&t=4827 Please let me know what other information you require. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- [Intrepid][Regression] Rt61pci wireless stopped working between Beta and Final Live CDs https://bugs.launchpad.net/bugs/293312 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 233784] Re: Local printer on remote desktop via RDP
This is reported upstream here: http://sourceforge.net/tracker/?func=detail&atid=941577&aid=1938327&group_id=192483 -- Local printer on remote desktop via RDP https://bugs.launchpad.net/bugs/233784 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 293312] Re: [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs
** Summary changed: - [Intrepid][Regression] Rt61pci wireless stopped working between Beta and Final Live CDs + [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs ** Description changed: - This was working perfectly on Intrepid Beta and has regressed to not working when I try the Intrepid Final Live CD. - Network-manager cannot connect to my access point, even when I disable all security (both MAC filtering and encryption - it is now completely open). I have no issues connecting with an IPW2200. When I put in the WPA2 AP passphrase, the icon spins for a while and then fails. + Network-manager cannot connect to my access point, even when I disable + all security (both MAC filtering and encryption - it is now completely + open). I have found that it works as expected in Ubuntu, but Mythbuntu + is failing. The icon spins for a while and then fails. + + I have no issues connecting with an IPW2200. + Can anybody help me figure out where the issue is? The driver is "rt61pci". My lspci.txt [1.16 KiB] can be found in my earlier bug report (about Hardy) to the forums: http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=5&t=4827 Please let me know what other information you require. -- [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs https://bugs.launchpad.net/bugs/293312 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 293312] Re: [Intrepid][Mythbuntu] Rt61pci wireless works on Ubuntu Live CD but not Mythbuntu Live CD
** Summary changed: - [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs + [Intrepid][Mythbuntu] Rt61pci wireless works on Ubuntu Live CD but not Mythbuntu Live CD -- [Intrepid][Mythbuntu] Rt61pci wireless works on Ubuntu Live CD but not Mythbuntu Live CD https://bugs.launchpad.net/bugs/293312 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 293312] Re: [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs
$ uname -r 2.6.27-7-generic -- [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs https://bugs.launchpad.net/bugs/293312 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 293312] Re: [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs
I'm thinking that it must be some (tv tuner or lirc?) module that is in the Mythbuntu kernel but not the Ubuntu one. Can anyone think of anything I can try? Thanks again. -- [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs https://bugs.launchpad.net/bugs/293312 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 293312] Re: [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs
** Attachment added: "dmesg.txt" http://launchpadlibrarian.net/19420107/dmesg.txt -- [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs https://bugs.launchpad.net/bugs/293312 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 293312] Re: [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs
** Attachment added: "lsmod.txt" http://launchpadlibrarian.net/19420100/lsmod.txt -- [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs https://bugs.launchpad.net/bugs/293312 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 293312] Re: [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs
** Description changed: Network-manager cannot connect to my access point, even when I disable all security (both MAC filtering and encryption - it is now completely open). I have found that it works as expected in Ubuntu, but Mythbuntu is failing. The icon spins for a while and then fails. I have no issues connecting with an IPW2200. Can anybody help me figure out where the issue is? The driver is "rt61pci". - My lspci.txt [1.16 KiB] can be found in my earlier bug report (about Hardy) to the forums: - http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=5&t=4827 - Please let me know what other information you require. ** Attachment added: "lspci.txt" http://launchpadlibrarian.net/19420099/lspci.txt -- [Intrepid][Mythbuntu] Rt61pci wireless stopped working between Beta and Final Live CDs https://bugs.launchpad.net/bugs/293312 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 260612] Re: [Intrepid-Alpha4] Eject hotkey breaks keyboard and menus
The key no longer crashes the menus/keyboard, but it does not eject the disc as expected (pressing the CD-drive button works). ** Attachment added: "lspci-vvnn.txt" http://launchpadlibrarian.net/18762895/lspci-vvnn.txt -- [Intrepid-Alpha4] Eject hotkey breaks keyboard and menus https://bugs.launchpad.net/bugs/260612 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 260612] Re: [Intrepid-Alpha4] Eject hotkey breaks keyboard and menus
** Attachment added: "Xorg.0.log" http://launchpadlibrarian.net/18762906/Xorg.0.log -- [Intrepid-Alpha4] Eject hotkey breaks keyboard and menus https://bugs.launchpad.net/bugs/260612 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 223539] Re: FF download manager doesn't handle closed connections
Yes -- FF download manager doesn't handle closed connections https://bugs.launchpad.net/bugs/223539 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 173161] Re: Split patent-infringing CODEC plugins into a package for each format
Breaking the law isn't binary - you can be stung for each count or have damages vary based on the extent of infringement. More than that, people may have acquired patent licenses for various formats (MPEG patents through some DVD playing software that they have on Windows etc.) or the patent in question may not be enforceable in the user's jurisdiction. As I said - there are other reasons that I think that this is important aside from illegality, but that is the most serious. -- Split patent-infringing CODEC plugins into a package for each format https://bugs.launchpad.net/bugs/173161 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 293312] Re: [Intrepid][Mythbuntu] Rt61pci wireless works on Ubuntu Live CD but not Mythbuntu Live CD
** Description changed: Network-manager cannot connect to my access point, even when I disable all security (both MAC filtering and encryption - it is now completely - open). I have found that it works as expected in Ubuntu, but Mythbuntu - is failing. The icon spins for a while and then fails. + open). + + I tried most of the alphas and the beta and all worked as expected. Now + that I am trying the final editions (of Ubuntu and Mythbuntu), it asks + for my WPA2 password, then asks me to set up a password for my keyring, + then the icon spins for a while and then asks for the WPA2 password + again. I have no issues connecting with an IPW2200. Can anybody help me figure out where the issue is? The driver is "rt61pci". Please let me know what other information you require. + + (Sorry that I keep changing the description - I managed to get an Ubuntu + CD working and thought that the issue must be Mythbuntu-specific. I + then realised it was an older CD). -- [Intrepid][Mythbuntu] Rt61pci wireless works on Ubuntu Live CD but not Mythbuntu Live CD https://bugs.launchpad.net/bugs/293312 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223768] Re: Evince unable to open external links from pdf files
Looks confirmed to me. I suffer from this on Ubuntu Hardy. ** Changed in: evince (Ubuntu) Status: Incomplete => Confirmed -- Evince unable to open external links from pdf files https://bugs.launchpad.net/bugs/223768 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223768] Re: Evince unable to open external links from pdf files
An additional pdf that causes this for me (contains relative links, just for something different). ** Attachment added: "H:\My Documents\test.pdf" http://launchpadlibrarian.net/16287832/H%3A%5CMy%20Documents%5Ctest.pdf -- Evince unable to open external links from pdf files https://bugs.launchpad.net/bugs/223768 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 262857] Re: [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset
Still a problem with Intrepid Beta (although the logout man isn't there anymore, so the offset means that the red "power" symbol is hard against the edge of the screen). -- [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset https://bugs.launchpad.net/bugs/262857 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 262857] Re: [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset
It looks as though it is 12px offset to the right. ** Attachment added: "screenshot.xcf" http://launchpadlibrarian.net/18348801/screenshot.xcf -- [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset https://bugs.launchpad.net/bugs/262857 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 262857] Re: [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset
And a PNG ** Attachment added: "screenshot.png" http://launchpadlibrarian.net/18348803/screenshot.png ** Description changed: Binary package hint: xorg I am testing the Intrepid Alpha 4 live CD on my HTPC with an nVidia NV25 [GeForce4 Ti 4600]. The Samsung 1360x768 LCD TV and Dell LCD monitor work at the correct - resolution and seem fine, but are about 5-10 pixels offset to the right + resolution and seem fine, but are about 10-15 pixels offset to the right (the running green "logout" man cuts of on the inside of his front leg). Taking a screen capture works correctly and is not offset. The following modelines are reported in xorg.0.log: $ grep 1360 /var/log/Xorg.0.log (II) NV(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0 (II) NV(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) NV(0): Estimated virtual size for aspect ratio 1.7800 is 1360x768 (II) NV(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) (--) NV(0): Virtual size is 1360x768 (pitch 1360) (**) NV(0): *Driver mode "1360x768": 85.5 MHz, 47.7 kHz, 60.0 Hz (II) NV(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (**) NV(0): *Default mode "1360x768": 84.8 MHz, 47.7 kHz, 59.8 Hz (II) NV(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz) Please let me know if there is anything that I can send to help out. -- [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset https://bugs.launchpad.net/bugs/262857 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 262857] Re: [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset
** Bug watch added: freedesktop.org Bugzilla #17984 https://bugs.freedesktop.org/show_bug.cgi?id=17984 ** Also affects: xorg-server via https://bugs.freedesktop.org/show_bug.cgi?id=17984 Importance: Unknown Status: Unknown -- [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset https://bugs.launchpad.net/bugs/262857 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 130587] Re: New upstream version available
FreeSCI 0.6.4 released, older releases retracted Author: jameson Date: Sun 18. May 2008 FreeSCI 0.6.4 has been released; this release supersedes all previous releases. 0.6.4 is mostly a bugfix release, finally rendering most SCI0 games beatable (SCI0 games that have been confirmed to be beatable include LSL2, LSL3, QfG1/HQ and SQ3). Even though 0.6.4 is not quite as stable as our previous stable branch, we have decided to have it replace the stable branch due to potentially unclean code (code that may have been derived directly from SCI interpreter disassembly). Since FreeSCI is intended as a clean-room re-implementation of Sierra SCI, we do not permit such code in our code base; we have therefore replaced it with clean code (thanks to help from Max Horn). FreeSCI 0.6.4 further includes some improvements to the audio subsystem, but please note that all of these still require manual source code changes in order to be enabled: * MT-32 emulator support (Walter) (note that this requires MT-32 ROM files) * General MIDI support for SCI1 games * a CAMD MIDI driver for newer AmigaOS versions Meanwhile, please enjoy 0.6.4, and report any bugs you find to the bug tracker! http://freesci.linuxgames.com/?page=main -- New upstream version available https://bugs.launchpad.net/bugs/130587 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 262851] Re: [Hardy] LIRC does not generate input events
Thanks Marc, I really appreciate the help. That command doesn't give me anything from any button pushes (with any remotes). I'll try 8.10 soon, but not before it is a little less "alpha" as the g/f will not be impressed if I stop Mythbuntu from working! -- [Hardy] LIRC does not generate input events https://bugs.launchpad.net/bugs/262851 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 222440] Re: [Hardy] Screen no longer blanks when lid is closed
This was not fixed in Hardy, but it worked perfectly in Intrepid Alpha 4. It has now regressed and is broken again in Alpha 6. I think I should probably move this to acpi-support rather than gpm. ** Attachment added: "intrepid-gpm-bugreport" http://launchpadlibrarian.net/17773669/gpm-bugreport.txt ** Changed in: acpi-support (Ubuntu) Sourcepackagename: gnome-power-manager => acpi-support ** Summary changed: - [Hardy] Screen no longer blanks when lid is closed + [Intrepid] Regression Alpha 4 to 6: Screen no longer blanks when lid is closed ** Description changed: Binary package hint: gnome-power-manager - In all previous releases, I have not had an issue with this. I am fairly certain that this was working as of the beta: + In all previous releases, I have not had an issue with this. I am fairly certain that this was working as of the Hardy beta and broke in Hardy final: https://wiki.ubuntu.com/LaptopTestingTeam/DellInspiron510m - I have just installed a clean version (no home directory, from CD) of - Hardy 8.04 and pressing the lid-close button does absolutely nothing. + Intrepid Alpha 4 worked perfectly, but 6 does not work. Pressing the + lid-close button now does absolutely nothing. Please let me know what I can to isolate the problem. Thanks. -- [Intrepid] Regression Alpha 4 to 6: Screen no longer blanks when lid is closed https://bugs.launchpad.net/bugs/222440 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 30457] Re: Fn-F3 Battery function key doesn't work on Dell Latitude 110L
Re-opening this bug as it has stopped working in Intrepid Alpha 6. Please let me know if there is anything else that I can help with. lshal -m does not give anything ** Changed in: hotkey-setup (Ubuntu) Status: Fix Released => New -- Fn-F3 Battery function key doesn't work on Dell Latitude 110L https://bugs.launchpad.net/bugs/30457 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 262851] Re: [Hardy] LIRC does not generate input events
Wow, I'm truly impressed! I just tested an Alpha 6 live CD and, without installing anything, volume, numbers (anything non TV-specific) on the remote works out-of-the-box! Presumably configuring the rest should be possible now. Thanks for all of your help. -- [Hardy] LIRC does not generate input events https://bugs.launchpad.net/bugs/262851 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 51779] Re: IRDA-Devices are not created by default (ircomm: 161-0
Testing on Intrepid Alpha 6. Originally, there were no /dev/ircomm devices. When I modprobe ircomm and ircomm-tty, I have: $ ls /dev/ircomm* /dev/ircomm0 /dev/ircomm15 /dev/ircomm21 /dev/ircomm28 /dev/ircomm6 /dev/ircomm1 /dev/ircomm16 /dev/ircomm22 /dev/ircomm29 /dev/ircomm7 /dev/ircomm10 /dev/ircomm17 /dev/ircomm23 /dev/ircomm3 /dev/ircomm8 /dev/ircomm11 /dev/ircomm18 /dev/ircomm24 /dev/ircomm30 /dev/ircomm9 /dev/ircomm12 /dev/ircomm19 /dev/ircomm25 /dev/ircomm31 /dev/ircomm13 /dev/ircomm2 /dev/ircomm26 /dev/ircomm4 /dev/ircomm14 /dev/ircomm20 /dev/ircomm27 /dev/ircomm5 I don't actually know whether it is doing anything, or why I have so many, as I don't really know how to test. Typing "hexdump -C" and pressing the remote at the IR sensor doesn't give any output. -- IRDA-Devices are not created by default (ircomm: 161-0 https://bugs.launchpad.net/bugs/51779 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 262857] Re: [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset
Tested with Alpha 6 and this is still a problem. -- [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset https://bugs.launchpad.net/bugs/262857 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 272396] [NEW] [Intrepid] Built-in Infra-red (IR) device not creating input (event) device
Public bug reported: My Intel laptop has a built-in IR receiver. It does not create any /dev/input/event nodes and hexdump -C does not give anything when remote buttons are pressed. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- [Intrepid] Built-in Infra-red (IR) device not creating input (event) device https://bugs.launchpad.net/bugs/272396 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 272396] Re: [Intrepid] Built-in Infra-red (IR) device not creating input (event) device
** Attachment added: "output of lshal" http://launchpadlibrarian.net/17775755/lshal.txt -- [Intrepid] Built-in Infra-red (IR) device not creating input (event) device https://bugs.launchpad.net/bugs/272396 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 272396] Re: [Intrepid] Built-in Infra-red (IR) device not creating input (event) device
** Attachment added: "output of cat /proc/bus/input/devices" http://launchpadlibrarian.net/17775756/devices.txt -- [Intrepid] Built-in Infra-red (IR) device not creating input (event) device https://bugs.launchpad.net/bugs/272396 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 222440] Re: [Intrepid] Regression Alpha 4 to 6: Screen no longer blanks when lid is closed
** Tags added: regression -- [Intrepid] Regression Alpha 4 to 6: Screen no longer blanks when lid is closed https://bugs.launchpad.net/bugs/222440 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 262857] Re: [Intrepid] 1360x768 LCD TV (through VGA) displays slightly offset
I just tested this with another LCD screen and it is offset by the same amount, so it will be the graphics card driver rather than the screen (which makes sense). It's an: nVidia Corporation NV25 [GeForce4 Ti 4600] lspci output attached. ** Attachment added: "lspci.txt" http://launchpadlibrarian.net/17569081/lspci.txt ** Summary changed: - [Intrepid] 1360x768 LCD TV (through VGA) displays slightly offset + [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset ** Description changed: Binary package hint: xorg - I am testing the Intrepid Alpha 4 live CD on my HTPC. The Samsung - 1360x768 LCD TV works at the correct resolution and seems fine, but is - about 5-10 pixels offset to the right (the running green "logout" man - cuts of on the inside of his front leg). Taking a screen capture works - correctly and is not offset. + I am testing the Intrepid Alpha 4 live CD on my HTPC with an nVidia NV25 + [GeForce4 Ti 4600]. + + The Samsung 1360x768 LCD TV and Dell LCD monitor work at the correct + resolution and seem fine, but are about 5-10 pixels offset to the right + (the running green "logout" man cuts of on the inside of his front leg). + Taking a screen capture works correctly and is not offset. The following modelines are reported in xorg.0.log: $ grep 1360 /var/log/Xorg.0.log (II) NV(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0 (II) NV(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) NV(0): Estimated virtual size for aspect ratio 1.7800 is 1360x768 (II) NV(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) (--) NV(0): Virtual size is 1360x768 (pitch 1360) (**) NV(0): *Driver mode "1360x768": 85.5 MHz, 47.7 kHz, 60.0 Hz (II) NV(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (**) NV(0): *Default mode "1360x768": 84.8 MHz, 47.7 kHz, 59.8 Hz (II) NV(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz) - Please let me know if there is anything that I can send to help out. I - will test Alpha 5 when it comes out. + Please let me know if there is anything that I can send to help out. -- [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset https://bugs.launchpad.net/bugs/262857 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 262857] Re: [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset
Note that the proprietary drivers in Hardy work correctly (not offset). -- [Intrepid] nVidia NV25 [GeForce4 Ti 4600] displays slightly offset https://bugs.launchpad.net/bugs/262857 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223768] Re: Evince unable to open external links from pdf files
** Bug watch added: GNOME Bug Tracker #552071 http://bugzilla.gnome.org/show_bug.cgi?id=552071 ** Also affects: evince via http://bugzilla.gnome.org/show_bug.cgi?id=552071 Importance: Unknown Status: Unknown -- Evince unable to open external links from pdf files https://bugs.launchpad.net/bugs/223768 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 262851] Re: [Hardy] LIRC does not generate input events
> The ir receiver does not seem to be generating input events. If I run: > ~# lircd -n -d /dev/input/event6 -H devinput Christoph Bartelmus wrote (on the LIRC mailing list): Do you get any output from /dev/input/event6 at all? If not, then the problem is not in LIRC, but the kernel driver which is part of the Linux kernel. Have you made sure that you are using the correct config file? Christoph My response: No, we tested that and there was no output. > Have you made sure that you are using the correct config file? I thought that, given there were no events coming through, the config file wouldn't matter - is that the case? I selected my remote in the Mythbuntu Control Centre GUI, but I'm pretty new to all of this... So, according to them, my problem is in the kernel. -- [Hardy] LIRC does not generate input events https://bugs.launchpad.net/bugs/262851 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 211993] Re: [hardy] [udev] Failure to create symlinks /dev/dvd. /dev/dvdrw. /dev/cdrw etc.
> On your system, have you a /dev/dvdrw1 for example? Yes. Couldn't the (or one of the) dvd drives be set as /dev/dvd as well, for all of the programs that use it? -- [hardy] [udev] Failure to create symlinks /dev/dvd. /dev/dvdrw. /dev/cdrw etc. https://bugs.launchpad.net/bugs/211993 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 272945] [NEW] [Intrepid] Changes to account settings are not saved
Public bug reported: Binary package hint: mozilla-thunderbird I have five email accounts set up in Thunderbird (from a while ago). If I try to change any of these (aside from the top one) in Edit > Accounts, none of the changes are saved. Clicking "Ok" does not seem to do anything and the window stays open. For example, if I change account #2 to use TLS, if available, click OK (nothing happens) and then click Cancel, when I reopen it, it is back to "None". I am using a fully up-to-date Intrepid with TB version 2.0.0.16 (20080725). ** Affects: mozilla-thunderbird (Ubuntu) Importance: Undecided Status: New -- [Intrepid] Changes to account settings are not saved https://bugs.launchpad.net/bugs/272945 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234680] [NEW] MCC should have option to detect ir input device
Public bug reported: Binary package hint: mythbuntu-control-centre I accidentally selected the incorrect Winfast IR remote device when setting up MCC. I realised this when I opened Mythbackend setup and it told me that I had a Winfast 2000 (bt878). It would be much better if there was a "detect" button that could identify which IR devices were connected to the machine. This could be further enhanced by using cat /proc/bus/input/devices to set the input device without asking the user. ** Affects: mythbuntu-control-centre (Ubuntu) Importance: Undecided Status: New -- MCC should have option to detect ir input device https://bugs.launchpad.net/bugs/234680 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234678] [NEW] MCC should (have option to?) write TVOut PAL/NTSC information to xorg.conf
Public bug reported: Binary package hint: mythbuntu-control-centre When I first installed Mythbuntu 8.04, I chose to install the proprietary drivers for the nVidia (as I understand that Free nv ones do not support the TVOut on a GeForce4 Ti 4600). The screen worked, but was black and white. Thankfully, I had somebody over who had experienced the problem before and knew that it was because the PAL setting was incorrect. Using as a guide, we set the xorg.conf section to read: Section "Screen" [...] Option "TVStandard" "PAL-B" EndSection I had already told Mythbuntu that NZ's TV standard was PAL B/G. It would be great if Mythbuntu could use the setup information that I provided earlier to fill in this section. I imagine that I would have been stuck with black & white output had my friend not been here. Obviously, it would be even better if the PAL setting was suggested to the user once they said which country they were from - I had to look it up on Wikipedia. ** Affects: mythbuntu-control-centre (Ubuntu) Importance: Undecided Status: New -- MCC should (have option to?) write TVOut PAL/NTSC information to xorg.conf https://bugs.launchpad.net/bugs/234678 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234680] Re: MCC should have option to detect ir input device
I am using Mythbuntu 8.04 -- MCC should have option to detect ir input device https://bugs.launchpad.net/bugs/234680 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234691] [NEW] [Hardy] Links to ntfs folders do not work properly on reboot
Public bug reported: Binary package hint: nautilus I am using Ubuntu Hardy 8.04. I have a 70GB windows/ntfs partition on this machine. I click Places > 70 GB Volume. The drive icon appears on the desktop. I navigate to the folder that I want a link to. I middle-click drag to the desktop and create a link. For that session, the link to the folder works as expected. When I reboot, the 70 GB icon is no longer on my desktop and the icon for the link is different. If I click the link, I get an error that the link doesn't work and do I want to move it to the trash. Another window appears over the top of this saying that it is trying to open and click cancel to cancel. (One cannot actually click this window until the first error is clicked (even though it is underneath.) >From this point, clicking Places > 70 GB volume gives an error: Cannot mount volume Unable to mount the volume. mount_point cannot contain the following characters: newline, G_DIR_SEPARATOR (usually /) ** Affects: nautilus (Ubuntu) Importance: Undecided Status: New -- [Hardy] Links to ntfs folders do not work properly on reboot https://bugs.launchpad.net/bugs/234691 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 135548] Re: [Gutsy] Action on critical battery isn't triggered - regression
Things seem to fluctuate for me in Hardy. As far as I can tell, it sometimes works and sometimes doesn't. I would love to have somebody help us isolate the problem. -- [Gutsy] Action on critical battery isn't triggered - regression https://bugs.launchpad.net/bugs/135548 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234735] Re: Two cameras are listed when one Canon is plugged in
** Attachment added: "Screenshot-Camera Selection.png" http://launchpadlibrarian.net/14697409/Screenshot-Camera%20Selection.png -- Two cameras are listed when one Canon is plugged in https://bugs.launchpad.net/bugs/234735 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234735] [NEW] Two cameras are listed when one Canon is plugged in
Public bug reported: Binary package hint: f-spot I am using Hardy. I have plugged in two Canon cameras at different times. Both bring up a list of two cameras of the correct name. The "USB port" that it says the two cameras are plugged into are two different ports. Please see attached picture. ** Affects: f-spot (Ubuntu) Importance: Undecided Status: New -- Two cameras are listed when one Canon is plugged in https://bugs.launchpad.net/bugs/234735 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 234735] Re: Two cameras are listed when one Canon is plugged in
Both of the ports seem to work. -- Two cameras are listed when one Canon is plugged in https://bugs.launchpad.net/bugs/234735 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 251353] Re: Mytharchive does not work by default/lacking temp dir
+1. I found the suggested solution here (in case this helps someone else): http://www.mythtv.org/wiki/index.php/MythArchive#MythArchive_doesn.27t_work._It_gets_to_the_log_viewer_and_just_sits_there._What.27s_wrong.3F -- Mytharchive does not work by default/lacking temp dir https://bugs.launchpad.net/bugs/251353 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 211993] Re: [hardy] [udev] Failure to create symlinks /dev/dvd. /dev/dvdrw. /dev/cdrw etc.
Scott, Can you please tell me why these symlinks were dropped? This breaks a default mythbuntu install and I would like to know whether to file a bug against mythbuntu (detect and remap dvd to the relevant drive) or a udev bug to fix all apps that point to /dev/dvd. -- [hardy] [udev] Failure to create symlinks /dev/dvd. /dev/dvdrw. /dev/cdrw etc. https://bugs.launchpad.net/bugs/211993 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223534] Re: /dev/dvd and /dev/cdrom symlink removed in Hardy
Will this fix be applied to intrepid? -- /dev/dvd and /dev/cdrom symlink removed in Hardy https://bugs.launchpad.net/bugs/223534 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 260612] [NEW] [Intrepid-Alpha4] Eject hotkey breaks keyboard and menus
Public bug reported: Apologies for not knowing the package. I am using a fully-updated Intrepid Alpha 4. When I press Fn + F10 (Eject CD), the keyboard stops working and, when I click Applications, Places or System, it is highlighted, but does not drop down. The buttons still work, however, and I can click logout and log back in to get everything working again. Please let me know what further information I can give you to assist. ** Affects: xorg (Ubuntu) Importance: Undecided Status: New -- [Intrepid-Alpha4] Eject hotkey breaks keyboard and menus https://bugs.launchpad.net/bugs/260612 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 260612] Re: [Intrepid-Alpha4] Eject hotkey breaks keyboard and menus
I *think* this could be a X.org bug ** Changed in: xorg (Ubuntu) Sourcepackagename: None => xorg -- [Intrepid-Alpha4] Eject hotkey breaks keyboard and menus https://bugs.launchpad.net/bugs/260612 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 260621] [NEW] [Intrepid] System > Shut Down > Shut Down does nothing
Public bug reported: When I click System > Shut Down > Shut Down, absolutely nothing happens and I am back to the desktop as if I had not clicked anything. I am currently shutting down through the terminal. I am using a fully up-to-date Intrepid. Please let me know if I can provide you with anything to make this easier. ** Affects: gnome-desktop (Ubuntu) Importance: Undecided Status: New -- [Intrepid] System > Shut Down > Shut Down does nothing https://bugs.launchpad.net/bugs/260621 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315342] [NEW] [Regression][Intrepid] Laptop on AC thinks it is being connected and disconnected over and over
Public bug reported: Binary package hint: hal My fiancée's laptop is using Intrepid on a Dell Inspiron 600m. Prior to upgrading the machine, it was running Dapper (I think - it was a number of releases behind) and worked as expected. On battery, the machine works as expected. On AC, it constantly (maybe a couple of times per minute, see log) switches from thinking that it is on AC to on battery power. This causes the brightness to change and the machine to click. Needless to say, I am not too popular with her. Please find attached the output of the gnome-power-bugreport.sh script. Also attached is a log of the machine just sitting doing nothing (aside from changing brightness and clicking). The machine was on AC throughout the log. The machine worked correctly in Windows and in the previous version of Ubuntu, so I don't think that there is any hardware issue. Please let me know if I can be of any further assistance. ** Affects: hal (Ubuntu) Importance: Undecided Status: New -- [Regression][Intrepid] Laptop on AC thinks it is being connected and disconnected over and over https://bugs.launchpad.net/bugs/315342 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315342] Re: [Regression][Intrepid] Laptop on AC thinks it is being connected and disconnected over and over
** Attachment added: "gpm-bugreport.txt" http://launchpadlibrarian.net/21044924/gpm-bugreport.txt -- [Regression][Intrepid] Laptop on AC thinks it is being connected and disconnected over and over https://bugs.launchpad.net/bugs/315342 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315342] Re: [Regression][Intrepid] Laptop on AC thinks it is being connected and disconnected over and over
** Attachment added: "Output of lshal -m while the machine was plugged into AC" http://launchpadlibrarian.net/21044925/lshal.log -- [Regression][Intrepid] Laptop on AC thinks it is being connected and disconnected over and over https://bugs.launchpad.net/bugs/315342 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315342] Re: [Regression][Intrepid] Laptop on AC thinks it is being connected and disconnected over and over
** Attachment added: "Screenshot-Power History.png" http://launchpadlibrarian.net/21045060/Screenshot-Power%20History.png -- [Regression][Intrepid] Laptop on AC thinks it is being connected and disconnected over and over https://bugs.launchpad.net/bugs/315342 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315342] Re: [Regression][Intrepid] Laptop on AC thinks it is being connected and disconnected over and over
I tried the laptop with my charger and it works fine. Using her charger with my laptop has the same issue, so it must be a problem with the charger. I guess that I only noticed it with the new version because the new version does something more obvious each time that the AC is connected/disconnected. ** Changed in: hal (Ubuntu) Status: New => Invalid -- [Regression][Intrepid] Laptop on AC thinks it is being connected and disconnected over and over https://bugs.launchpad.net/bugs/315342 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319515] [NEW] package mysql-server-5.0 5.0.67-0ubuntu6 failed to install/upgrade: subprocess pre-installation script returned error exit status 1
Public bug reported: Something has gone badly wrong on my MythTV box and I am now getting an error of: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) whenever I run mysql. I am trying to reinstall everything to try and fix it. ProblemType: Package Architecture: i386 DistroRelease: Ubuntu 8.10 ErrorMessage: subprocess pre-installation script returned error exit status 1 Package: mysql-server-5.0 5.0.67-0ubuntu6 SourcePackage: mysql-dfsg-5.0 Title: package mysql-server-5.0 5.0.67-0ubuntu6 failed to install/upgrade: subprocess pre-installation script returned error exit status 1 Uname: Linux 2.6.27-9-generic i686 ** Affects: mysql-dfsg-5.0 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- package mysql-server-5.0 5.0.67-0ubuntu6 failed to install/upgrade: subprocess pre-installation script returned error exit status 1 https://bugs.launchpad.net/bugs/319515 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319515] Re: package mysql-server-5.0 5.0.67-0ubuntu6 failed to install/upgrade: subprocess pre-installation script returned error exit status 1
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/21501264/Dependencies.txt ** Attachment added: "DpkgTerminalLog.txt" http://launchpadlibrarian.net/21501265/DpkgTerminalLog.txt -- package mysql-server-5.0 5.0.67-0ubuntu6 failed to install/upgrade: subprocess pre-installation script returned error exit status 1 https://bugs.launchpad.net/bugs/319515 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 333011] [NEW] [needs-updating] libmpeg2 0.5.1 available upstream
Public bug reported: Binary package hint: mpeg2dec Please upgrade libmpeg2 to version 0.5.1, which is available upstream: http://libmpeg2.sourceforge.net/downloads.html libmpeg2-0.5.1 (July 19, 2008): Fix broken installation of headers, fix pkgconfig files. libmpeg2-0.5.0 (July 12, 2008): New optimisations for SSE2 and ARM instruction sets, support for aspect ratio changes detection, and robustness against corrupted streams. ** Affects: mpeg2dec (Ubuntu) Importance: Undecided Status: Confirmed -- [needs-updating] libmpeg2 0.5.1 available upstream https://bugs.launchpad.net/bugs/333011 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 333181] [NEW] [RadeonHD 3200] Console resolution doesn't work "mode not supported" when fglrx works fine
Public bug reported: Binary package hint: xserver-xorg-video-ati I have an AMD 780G chipset with integrated RadeonHD 3200 graphics. I am running a 1360x768 Samsung TV over D-Sub. The display works as expected but if I push Ctrl+Alt+F1, I get a "Mode not supported" message from the TV. If I change to the fglrx driver, this works correctly and I can see and use the console. Please let me know if I can give you any more information. ProblemType: Bug Architecture: amd64 DistroRelease: Ubuntu 8.10 NonfreeKernelModules: fglrx Package: xserver-xorg-video-ati 1:6.9.0+git20081003.f9826a56-0ubuntu2.1 ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_NZ.UTF-8 SHELL=/bin/bash ProcVersion: Linux version 2.6.27-11-generic (bui...@crested) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:28:32 UTC 2009 SourcePackage: xserver-xorg-video-ati Uname: Linux 2.6.27-11-generic x86_64 xkbcomp: ** Affects: xserver-xorg-video-ati (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- [RadeonHD 3200] Console resolution doesn't work "mode not supported" when fglrx works fine https://bugs.launchpad.net/bugs/333181 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 333181] Re: [RadeonHD 3200] Console resolution doesn't work "mode not supported" when fglrx works fine
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/22998139/Dependencies.txt ** Attachment added: "LsMod.txt" http://launchpadlibrarian.net/22998140/LsMod.txt ** Attachment added: "LsPci.txt" http://launchpadlibrarian.net/22998141/LsPci.txt ** Attachment added: "XorgConf.txt" http://launchpadlibrarian.net/22998142/XorgConf.txt ** Attachment added: "XorgLog.txt" http://launchpadlibrarian.net/22998144/XorgLog.txt ** Attachment added: "XorgLogOld.txt" http://launchpadlibrarian.net/22998145/XorgLogOld.txt ** Attachment added: "Xrandr.txt" http://launchpadlibrarian.net/22998147/Xrandr.txt ** Attachment added: "setxkbmap.txt" http://launchpadlibrarian.net/22998148/setxkbmap.txt ** Attachment added: "xdpyinfo.txt" http://launchpadlibrarian.net/22998149/xdpyinfo.txt -- [RadeonHD 3200] Console resolution doesn't work "mode not supported" when fglrx works fine https://bugs.launchpad.net/bugs/333181 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 333184] [NEW] Usplash gives "Mode not supported" on Samsung 720p TV
Public bug reported: Binary package hint: usplash I am using an AMD 780G chipset with Radeon HD 3200 graphics and have a Samsung 1360x768 LCD TV running over D-Sub. I reported with ubuntu-bug -p usplash, so hopefully you have everything you need. Whenever Mythbuntu is starting up, I get the initial bios information and display until after Grub. Then the TV gives a "Mode not supported" error until X starts. The same error occurs when shutting down. I am using Mythbuntu 8.10. Please let me know if I can give you anything further. ProblemType: Bug Architecture: amd64 DistroRelease: Ubuntu 8.10 NonfreeKernelModules: fglrx Package: usplash 0.5.25 ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_NZ.UTF-8 SHELL=/bin/bash SourcePackage: usplash Uname: Linux 2.6.27-11-generic x86_64 ** Affects: usplash (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- Usplash gives "Mode not supported" on Samsung 720p TV https://bugs.launchpad.net/bugs/333184 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 333184] Re: Usplash gives "Mode not supported" on Samsung 720p TV
** Attachment added: "lspci-vnvn.log" http://launchpadlibrarian.net/22998357/lspci-vnvn.log ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/22998358/Dependencies.txt -- Usplash gives "Mode not supported" on Samsung 720p TV https://bugs.launchpad.net/bugs/333184 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 333184] Re: Usplash gives "Mode not supported" on Samsung 720p TV
** Attachment added: "uname-a.txt" http://launchpadlibrarian.net/22998371/uname-a.txt -- Usplash gives "Mode not supported" on Samsung 720p TV https://bugs.launchpad.net/bugs/333184 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 333184] Re: Usplash gives "Mode not supported" on Samsung 720p TV
** Attachment added: "usplash.conf" http://launchpadlibrarian.net/22998373/usplash.conf -- Usplash gives "Mode not supported" on Samsung 720p TV https://bugs.launchpad.net/bugs/333184 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 333184] Re: Usplash gives "Mode not supported" on Samsung 720p TV
** Attachment added: "menu.lst" http://launchpadlibrarian.net/22998372/menu.lst -- Usplash gives "Mode not supported" on Samsung 720p TV https://bugs.launchpad.net/bugs/333184 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 262851] [NEW] [Hardy] LIRC does not generate input events
Public bug reported: Binary package hint: lirc Using Mythbuntu 8.04, fully updated. I have a bttv Winfast TV 2000XP (card 34) that is working fine for all TV capture. The ir receiver does not seem to be generating input events. If I run: ~# lircd -n -d /dev/input/event6 -H devinput lircd-0.8.3pre1[6477]: lircd(userspace) ready No further events are received as I push buttons on the remote. The remote worked fine in Windows XP with the enclosed drivers. The input device seems to have registered correctly. ~# cat /proc/bus/input/devices I: Bus=0001 Vendor=107d Product=6606 Version=0001 N: Name="bttv IR (card=34)" P: Phys=pci-:02:0a.0/ir0 S: Sysfs=/devices/pci:00/:00:1e.0/:02:0a.0/input/input6 U: Uniq= H: Handlers=kbd event6 B: EV=13 B: KEY=10afc336 2150a48 0 0 0 404 8001 190 4801 1e 4400 10 1ffc ~# lspci | grep Brooktree 02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) If I can be of any further help - any advice would be appreciated. We've RTFM and Google was not My Friend. ** Affects: lirc (Ubuntu) Importance: Undecided Status: New -- [Hardy] LIRC does not generate input events https://bugs.launchpad.net/bugs/262851 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 262857] [NEW] [Intrepid] 1360x768 LCD TV (through VGA) displays slightly offset
Public bug reported: Binary package hint: xorg I am testing the Intrepid Alpha 4 live CD on my HTPC. The Samsung 1360x768 LCD TV works at the correct resolution and seems fine, but is about 5-10 pixels offset to the right (the running green "logout" man cuts of on the inside of his front leg). Taking a screen capture works correctly and is not offset. The following modelines are reported in xorg.0.log: $ grep 1360 /var/log/Xorg.0.log (II) NV(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0 (II) NV(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) NV(0): Estimated virtual size for aspect ratio 1.7800 is 1360x768 (II) NV(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) (--) NV(0): Virtual size is 1360x768 (pitch 1360) (**) NV(0): *Driver mode "1360x768": 85.5 MHz, 47.7 kHz, 60.0 Hz (II) NV(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (**) NV(0): *Default mode "1360x768": 84.8 MHz, 47.7 kHz, 59.8 Hz (II) NV(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz) Please let me know if there is anything that I can send to help out. I will test Alpha 5 when it comes out. ** Affects: xorg (Ubuntu) Importance: Undecided Status: New -- [Intrepid] 1360x768 LCD TV (through VGA) displays slightly offset https://bugs.launchpad.net/bugs/262857 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 109701] Re: [needs-packaging] Truecrypt
After spending quite a bit of time looking into this, the Fedora wiki is probably the best place to look for current information: http://fedoraproject.org/wiki/ForbiddenItems#TrueCrypt So much of the other information is quickly out of date as the licence changes. -- [needs-packaging] Truecrypt https://bugs.launchpad.net/bugs/109701 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 260612] Re: [Intrepid-Alpha4] Eject hotkey breaks keyboard and menus
Fixed in intrepid. -- [Intrepid-Alpha4] Eject hotkey breaks keyboard and menus https://bugs.launchpad.net/bugs/260612 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 222440] Re: [Intrepid] Regression Alpha 4 to 6: Screen no longer blanks when lid is closed
This works in Intrepid final. ** Changed in: acpi-support (Ubuntu) Status: New => Fix Released -- [Intrepid] Regression Alpha 4 to 6: Screen no longer blanks when lid is closed https://bugs.launchpad.net/bugs/222440 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 333181] Re: [HD 3200] Console resolution doesn't work "mode not supported" when fglrx works fine
Sorry. Been busy. Perhaps those extra files should be added to the apport automatic reporter. The system is our HTPC so I don't like to break it. I will be upgrading to jaunty next month and will get the files. ** Changed in: xserver-xorg-video-ati (Ubuntu) Status: Invalid => Incomplete -- [HD 3200] Console resolution doesn't work "mode not supported" when fglrx works fine https://bugs.launchpad.net/bugs/333181 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 264835] [NEW] [Intrepid] "Guest" account should be accessible from login screen
Public bug reported: I use a laptop, so my computer is usually off until somebody wants to use it. I think that the "Guest" account is a really good idea, but I currently have to login to my account in order to let someone use it (wait for it to login and then change the "user" through the user- switcher). Not only does this take a while with the person sitting there waiting, it makes it look as though you have something to hide! Added to that, I prefer to remove the user-switcher from the panel as it takes up space and I am the only user. I think it would be great if there was a "Login as Guest" icon on the main login screen. That way, I could just give my laptop to someone (turned off), tell them to click the "Login as Guest" icon when it gets to it and leave them to it - it would make using a Guest account easier (which seems sensible) rather than an extra step. ** Affects: ubuntu Importance: Undecided Status: New -- [Intrepid] "Guest" account should be accessible from login screen https://bugs.launchpad.net/bugs/264835 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 370696] Re: MythTV should use the static device names in /dev/v4l/by-path/* to stop video devices changing on boot
*** This bug is a duplicate of bug 310820 *** https://bugs.launchpad.net/bugs/310820 I have attached an updated script (with your real name) to the other bug. Thanks again for writing and releasing it! -- MythTV should use the static device names in /dev/v4l/by-path/* to stop video devices changing on boot https://bugs.launchpad.net/bugs/370696 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 398702] [NEW] "Guest" access doesn't allow sharing without username/password
Public bug reported: Binary package hint: nautilus-share I was trying to share a folder to another laptop in our house. I am safe within a network, so was happy to allow anyone who could connect to my network connect to the share. I right-clicked the folder, clicked share this folder, set a share name and checked the "allow Guest access" box. I then jumped on the other Ubuntu laptop and went into Places > Network. I browsed to my share, double-clicked the share and it gave a "could not mount volume" error. I could access the share, but only if I clicked "Connect to Server" and put in my username and password. Shouldn't the "allow Guest access" mean that I don't need to do that? (I did the same thing sharing a Windows folder to an Ubuntu machine and it was much easier.) ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 9.04 Package: nautilus-share 0.7.2-4ubuntu1 ProcEnviron: LANG=en_NZ.UTF-8 SHELL=/bin/bash SourcePackage: nautilus-share Uname: Linux 2.6.28-13-generic i686 ** Affects: nautilus-share (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 -- "Guest" access doesn't allow sharing without username/password https://bugs.launchpad.net/bugs/398702 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 398702] Re: "Guest" access doesn't allow sharing without username/password
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/28954825/Dependencies.txt -- "Guest" access doesn't allow sharing without username/password https://bugs.launchpad.net/bugs/398702 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 315710] Re: Linux needs exFAT support
Just an FYI: http://www.microsoft.com/iplicensing/productDetail.aspx?productTitle=exFAT%20File%20System%20Licensing%20Program -- Linux needs exFAT support https://bugs.launchpad.net/bugs/315710 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 48992] Re: Totem-Gst cannot seek in file
Here is the output from Totem at debug=3. Every time: 1) open file 2) drag the slider to a point (say, 20 mins) 3) I get a very short (less than a second) bit of sound and then silence while the time continues to increase, at normal speed, as if the track is playing. -- Totem-Gst cannot seek in file https://launchpad.net/bugs/48992 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 54762] RFE: Handling of stitched images
Public bug reported: I own a Canon PowerShot A85 camera and am using f-spot on Dapper. I have taken some photos in "Stitched" mode. This keeps a bit of the previous picture on the screen so that one can take multiple photos that line up into one long photo. If I use the proprietary software in Windows, the following happens: 1) The photos are imported 2) The fact that I have taken photos in this mode is detected by the software and I am taken into a "Stitching" programme. This may be done off filenames as I cannot immediately see any tags about it. 3) The software automatically attempts to overlay the photos in the correct places and produces a chain of photos. 4) A square is drawn around the photos to give the biggest possible connected photo (when using this mode, one often slips up or down and this cuts off the bits either side). For most photos, this is all automatic and merely requires the user to confirm things. I would love to see this feature implemented in f-spot - it would give the feature to all cameras, not just mine. I realise that it is a lot of work and suggest that perhaps it could be done as follows: 1) Create a sub-programme to work with the photos manually. This would probably need the ability to manually move the photos around and the ability to draw a square to create one photo from them. 2) Create an option to select some photos and open the programme in (1). This would mean that the user could manually select photos to be stitched and somehow select "Stitch these Photos". 3) Try to automate the process of lining the photos up by matching similar regions and the process of drawing a square around the combined picture. 4) Try to detect sets of stitched photos - this is likely camera specific. If all the above is done, this could be implemented camera-by-camera with the owners of unsupported cameras keeping to the manual method. 5) Perhaps a dialogue could be displayed after importing asking whether or not the user would like to enter the stitching programme. The detected "sets" could be displayed as a list of small pictures on one side. ** Affects: f-spot (Ubuntu) Importance: Untriaged Status: Unconfirmed -- RFE: Handling of stitched images https://launchpad.net/bugs/54762 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 54762] Re: RFE: Handling of stitched images
I have also requested this functionality in gthumb as Bug #54764 -- RFE: Handling of stitched images https://launchpad.net/bugs/54762 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 54764] RFE: Handling of stitched images
Public bug reported: I own a Canon PowerShot A85 camera and am using gthumb on Dapper. I have taken some photos in "Stitched" mode. This keeps a bit of the previous picture on the screen so that one can take multiple photos that line up into one long photo. If I use the proprietary software in Windows, the following happens: 1) The photos are imported 2) The fact that I have taken photos in this mode is detected by the software and I am taken into a "Stitching" programme. This may be done off filenames as I cannot immediately see any tags about it. 3) The software automatically attempts to overlay the photos in the correct places and produces a chain of photos. 4) A square is drawn around the photos to give the biggest possible connected photo (when using this mode, one often slips up or down and this cuts off the bits either side). For most photos, this is all automatic and merely requires the user to confirm things. I would love to see this feature implemented in gthumb - it would give the feature to all cameras, not just mine. I realise that it is a lot of work and suggest that perhaps it could be done as follows: 1) Create a sub-programme to work with the photos manually. This would probably need the ability to manually move the photos around and the ability to draw a square to create one photo from them. 2) Create an option to select some photos and open the programme in (1). This would mean that the user could manually select photos to be stitched and somehow select "Stitch these Photos". 3) Try to automate the process of lining the photos up by matching similar regions and the process of drawing a square around the combined picture. 4) Try to detect sets of stitched photos - this is likely camera specific. If all the above is done, this could be implemented camera-by-camera with the owners of unsupported cameras keeping to the manual method. 5) Perhaps a dialogue could be displayed after importing asking whether or not the user would like to enter the stitching programme. The detected "sets" could be displayed as a list of small pictures on one side. Note that I have also requested this functionality in f-spot as Bug #54762 ** Affects: gthumb (Ubuntu) Importance: Untriaged Status: Unconfirmed -- RFE: Handling of stitched images https://launchpad.net/bugs/54764 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 37291] Re: NETDEV_TX_BUSY returned when (re)loading driver
http://www.bughost.org/bugzilla/show_bug.cgi?id=808 may be of interest. -- NETDEV_TX_BUSY returned when (re)loading driver https://launchpad.net/bugs/37291 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 39119] Re: Sound recorder disables the capture device after a second recording
Dapper-updates has been returning a zip error message since you asked for this, but it seems fixed for me anyway. I'm using gnome-media 2.14.2-0ubuntu1. Thanks for your help :). ** Changed in: gnome-media (Ubuntu) Status: Needs Info => Fix Released -- Sound recorder disables the capture device after a second recording https://launchpad.net/bugs/39119 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 55637] Synaptic and Add/Remove should ask the user to enable popcon
Public bug reported: The Ubuntu Popularity contest is very useful to Ubuntu. From: https://wiki.ubuntu.com/SimplePopconParticipation "[It is] used for such purposes as determining which packages to include on Ubuntu CDs and sorting in package management UIs. However, choosing to participate in this program is cumbersome and should be simplified. The more users participate in this effort, the more useful the information is. However, participation cannot be enabled by default for privacy reasons. Thus, we would like to make it simple for the user to opt to participate." The aim of popcon is to get a statistically unbiased representation of package usage. The current method of enabling popcon (https://help.ubuntu.com/community/PopularityContest), and proposed methods (hiding it in the preferences of software sources), essentially mean that popcon only gets data from advanced users. This skewness in the data renders the results of far less use as the sample is biased. In order to obtain more "clean" data, each (administrative) user should have the same probability of enabling the application. The logical method by which this aim could be achieved would be to ask the user the first time that Synaptic or Add/Remove is started (unless the user has already enabled it). This would ensure that only those with admin rights would be asked, would ensure that the privacy implications were properly explained but maximise the use of the project. The message could read: "Would you like to participate in the Ubuntu Popularity Contest? The Ubuntu Popularity Contest is an easy way to assist the Ubuntu team. By sending us information about what you have installed, we can ensure that we are focusing on the programs that people use most! For more information, please visit: [x] Enable the Ubuntu Popularity Contest [ ] Do not enable the Ubuntu Popularity Contest" ** Affects: synaptic (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Synaptic and Add/Remove should ask the user to enable popcon https://launchpad.net/bugs/55637 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 55637] Re: Provide a more visual way to enable the PopCon participation
That makes a lot of sense. I too hate nag screens and people are expecting to answer questions in an installer (and may have a more experienced user with them). It also has a big advantage because it would be asked regardless of which package manager Ubuntu settles on. -- Provide a more visual way to enable the PopCon participation https://launchpad.net/bugs/55637 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 39128] Re: gnome-sound-properties: No list-box for when one gets to the username/password screen
Sorry - "*mixing* system and user sounds" -- gnome-sound-properties: No list-box for when one gets to the username/password screen https://launchpad.net/bugs/39128 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 39128] Re: gnome-sound-properties: No list-box for when one gets to the username/password screen
Fair enough. I didn't realise when I posted that I was missing system and user sounds. I do repeat, however, that this is a confusing situation for users. -- gnome-sound-properties: No list-box for when one gets to the username/password screen https://launchpad.net/bugs/39128 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 56428] Aria needs a .desktop file
Public bug reported: Aria doesn't contain .desktop file. This means that it does not add a menu entry in Dapper or appear in Add/Remove. I am using Dapper but I have checked the list of files in the Edgy version and it does not seem to have one either. ** Affects: aria (Ubuntu) Importance: Untriaged Assignee: Phil Bull Status: Unconfirmed ** Changed in: aria (Ubuntu) Assignee: (unassigned) => Phil Bull -- Aria needs a .desktop file https://launchpad.net/bugs/56428 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 56543] Only ask for passphrase once to decrypt multiple files
Public bug reported: I am using seahorse on Dapper Drake. If I select multiple files in Nautilus and select "open with decrypt file" then I get a string of "Enter Passphrase" windows. It would be great if I could be given one window to enter the passphrase - perhaps it could list all the files? ** Affects: seahorse (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Only ask for passphrase once to decrypt multiple files https://launchpad.net/bugs/56543 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 49254] Re: Firefox should inhibit Gnome Power Manager from suspending due to inactivity when downloading
Hi, As it says in the linked page: "This will not prevent the machine suspending when power is low but will prevent the system suspending for the reason that it is not being used." -- Firefox should inhibit Gnome Power Manager from suspending due to inactivity when downloading https://launchpad.net/bugs/49254 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 40091] Re: Pushing display to VGA port doesn't work at 1400x1050 on i855
Status changed to Needs Info - I just found out the monitor doesn't support 1400x1050 so I will have to test on a better monitor. ** Changed in: xserver-xorg-driver-i810 (Ubuntu) Assignee: (unassigned) => Aaron Whitehouse Status: Unconfirmed => Needs Info -- Pushing display to VGA port doesn't work at 1400x1050 on i855 https://launchpad.net/bugs/40091 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 50966] nVidia GeForce 440mx not fully installed
Public bug reported: I installed Dapper Drake on a desktop with a GeForce 440mx. The restricted modules (linux-restricted-modules-2.6.15-23-386) were installed but direct rendering was still unavailable. We corrected this by installing nvidia-glx and manually editing xorg.conf to change the driver from "nv" to "nvidia". We also commented out the LoadModules "dri" line. ** Affects: base-installer (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Attachment added: "xorg.conf" http://librarian.launchpad.net/3153288/xorg.conf ** Attachment added: "xorg.conf before mods" http://librarian.launchpad.net/3153290/xorg.conf ** Attachment added: "lshal" http://librarian.launchpad.net/3153291/lshal.txt -- nVidia GeForce 440mx not fully installed https://launchpad.net/bugs/50966 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 50966] Re: nVidia GeForce 440mx not fully installed
I don't understand - aren't the "restricted modules" proprietary (and the ipw2200 firmware that comes on the CD)? I assumed that it had tried, and failed, to install the proprietary ones. Are GPLed drivers installed instead that just can't handle direct rendering? -- nVidia GeForce 440mx not fully installed https://launchpad.net/bugs/50966 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 15019] Re: Difficulty downgrading packages with dependencies
This is quite an issue for me. I wanted to try the new libtheora and had to manually upgrade the versions of libc6 etc. smb no longer worked with the new versions of libc6 so I wanted to return my system to what it used to be. I tried clicking on the package and "Force Version"ing but that (as was mentioned) wants to remove everything dependent on libc6 - even though they clearly work with the standard Dapper version. The way I worked around it was to download the deb from the Dapper repo and manually installing with dpkg at the command line (gdebi won't let you downgrade). Perhaps a "Revert" option, to resync with the repo, could lessen the impact of this bug. -- Difficulty downgrading packages with dependencies https://launchpad.net/bugs/15019 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
