Re: [PHP] Re: Got HTML5 History API + caching LICKED, I think,
Because some of you complained about the byte size of my homepage http://mediabeez.ws (was 2.5mb due to artwork), I've invested some time in shaving off quite a few bytes; I've discovered that by using photoshop to reduce the animation image color depth to "indexed color, 217 color", I can get the animation image file size down to less than 50% of the original that was output by my spriteGenerator-1.0.0 And you hardly notice the difference at all :) I'm going to update http://mediabeez.ws later today, hopefully after I find a way to do this with imagemagick, which my spriteGenerator uses. And since I also use half the frames for my site logo of http://mediabeez.ws, that animation file is now 297kb, down from 2mb.
Re: [PHP] Re: Got HTML5 History API + caching LICKED, I think,
On Fri, Mar 23, 2012 at 10:02 AM, rene7705 wrote: > Because some of you complained about the byte size of my homepage > http://mediabeez.ws (was 2.5mb due to artwork), I've invested some time > in shaving off quite a few bytes; > > I've discovered that by using photoshop to reduce the animation image > color depth to "indexed color, 217 color", I can get the animation image > file size down to less than 50% of the original that was output by my > spriteGenerator-1.0.0 > > And you hardly notice the difference at all :) > > I'm going to update http://mediabeez.ws later today, hopefully after I > find a way to do this with imagemagick, which my spriteGenerator uses. > > And since I also use half the frames for my site logo of > http://mediabeez.ws, that animation file is now 297kb, down from 2mb. > > > Ok, http://mediabeez.ws and the download zip there are now updated. On devices with less than 400 pixels wide screen, the total size for the homepage is now 61kb. On devices with more than 400 pixels wide screen, it's 910kb, due to more artwork being loaded. I take it that takes care of the "it's too friggin' large!" critiques ;)
Re: [PHP] Re: Got HTML5 History API + caching LICKED, I think,
On Fri, Mar 23, 2012 at 12:38 PM, rene7705 wrote: > > > On Fri, Mar 23, 2012 at 10:02 AM, rene7705 wrote: > >> Because some of you complained about the byte size of my homepage >> http://mediabeez.ws (was 2.5mb due to artwork), I've invested some time >> in shaving off quite a few bytes; >> >> I've discovered that by using photoshop to reduce the animation image >> color depth to "indexed color, 217 color", I can get the animation image >> file size down to less than 50% of the original that was output by my >> spriteGenerator-1.0.0 >> >> And you hardly notice the difference at all :) >> >> I'm going to update http://mediabeez.ws later today, hopefully after I >> find a way to do this with imagemagick, which my spriteGenerator uses. >> >> And since I also use half the frames for my site logo of >> http://mediabeez.ws, that animation file is now 297kb, down from 2mb. >> >> >> Ok, http://mediabeez.ws and the download zip there are now updated. > On devices with less than 400 pixels wide screen, the total size for the > homepage is now 61kb. > On devices with more than 400 pixels wide screen, it's 910kb, due to more > artwork being loaded. > > I take it that takes care of the "it's too friggin' large!" critiques ;) > I'd REALLY appreciate if you can load up http://mediabeez.ws on your mobile phone and tell me - if it works (if it doesn't, you'll keep staring at a white screen) - your phone model and type
Re: [PHP] Re: Got HTML5 History API + caching LICKED, I think,
On Fri, Mar 23, 2012 at 12:39 PM, rene7705 wrote: > > > On Fri, Mar 23, 2012 at 12:38 PM, rene7705 wrote: > >> >> >> On Fri, Mar 23, 2012 at 10:02 AM, rene7705 wrote: >> >>> Because some of you complained about the byte size of my homepage >>> http://mediabeez.ws (was 2.5mb due to artwork), I've invested some time >>> in shaving off quite a few bytes; >>> >>> I've discovered that by using photoshop to reduce the animation image >>> color depth to "indexed color, 217 color", I can get the animation image >>> file size down to less than 50% of the original that was output by my >>> spriteGenerator-1.0.0 >>> >>> And you hardly notice the difference at all :) >>> >>> I'm going to update http://mediabeez.ws later today, hopefully after I >>> find a way to do this with imagemagick, which my spriteGenerator uses. >>> >>> And since I also use half the frames for my site logo of >>> http://mediabeez.ws, that animation file is now 297kb, down from 2mb. >>> >>> >>> Ok, http://mediabeez.ws and the download zip there are now updated. >> On devices with less than 400 pixels wide screen, the total size for the >> homepage is now 61kb. >> On devices with more than 400 pixels wide screen, it's 910kb, due to more >> artwork being loaded. >> >> I take it that takes care of the "it's too friggin' large!" critiques ;) >> > > I'd REALLY appreciate if you can load up http://mediabeez.ws on your > mobile phone and tell me > - if it works (if it doesn't, you'll keep staring at a white screen) > - your phone model and type > > > As a last note, do NOT load up the buttons demo page if you have to pay for bandwidth, as that page loads up 10mb of artwork still.
RE: [PHP] Re: Got HTML5 History API + caching LICKED, I think,
> -Original Message- > From: rene7705 [mailto:rene7...@gmail.com] > Sent: March 23, 2012 7:40 AM > To: php-general > Subject: Re: [PHP] Re: Got HTML5 History API + caching LICKED, I think, > > > On Fri, Mar 23, 2012 at 12:39 PM, rene7705 wrote: > > > > > > > On Fri, Mar 23, 2012 at 12:38 PM, rene7705 wrote: > > > >> > >> > >> On Fri, Mar 23, 2012 at 10:02 AM, rene7705 wrote: > >> > >>> Because some of you complained about the byte size of my homepage > >>> http://mediabeez.ws (was 2.5mb due to artwork), I've invested some time > >>> in shaving off quite a few bytes; > >>> > >>> I've discovered that by using photoshop to reduce the animation image > >>> color depth to "indexed color, 217 color", I can get the animation > image > >>> file size down to less than 50% of the original that was output by my > >>> spriteGenerator-1.0.0 > >>> > >>> And you hardly notice the difference at all :) > >>> > >>> I'm going to update http://mediabeez.ws later today, hopefully after I > >>> find a way to do this with imagemagick, which my spriteGenerator uses. > >>> > >>> And since I also use half the frames for my site logo of > >>> http://mediabeez.ws, that animation file is now 297kb, down from 2mb. > >>> > >>> > >>> Ok, http://mediabeez.ws and the download zip there are now updated. > >> On devices with less than 400 pixels wide screen, the total size for the > >> homepage is now 61kb. > >> On devices with more than 400 pixels wide screen, it's 910kb, due to > more > >> artwork being loaded. > >> > >> I take it that takes care of the "it's too friggin' large!" critiques ;) > >> > > > > I'd REALLY appreciate if you can load up http://mediabeez.ws on your > > mobile phone and tell me > > - if it works (if it doesn't, you'll keep staring at a white screen) > > - your phone model and type > > > > > > As a last note, do NOT load up the buttons demo page if you have to pay > for bandwidth, as that page loads up 10mb of artwork still. > My pet peeve with this, is that it takes at least 5 seconds before anything displays on the page. It almost makes me think the site is down. If you had a "loading content" or something (even though that bugs a lot of people), then it would at least make me think that there is nothing wrong with your site... (or maybe speed up your code somehow). Also, the menu dropdowns, I find awkward. Visually, they don't look pleasing to me. There is too much space between them, and the way they overlap when you have more than 1 level in them, (personally) bugs me. I also loaded this on my cell phone, LG Optimus One, running Android 2.3, and it loaded up ok (same slowness), but the menus are VERY slow, and VERY hard to use unless I zoom right in. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Re: Got HTML5 History API + caching LICKED, I think,
Did I accidentally subscribe to the mediabeez website development mailing list? Hello? -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP] Re: Got HTML5 History API + caching LICKED, I think,
concerning your background image: If I resize my window after loading finished, your images gets distorted (the one with the bee) I also think - this is not verified yet - that an animated gif with interlacing is smaller than your logo png spritemap Why is this frame loaded http://mediabeez.ws/code/libraries_rv/animatedJavascriptWidgets-1.0.0/themes/dialogs/dialog_002/frame_normal_000.png also it is not used in the page you see after loading? The loading times for these http://mediabeez.ws/code/libraries_rv/animatedJavascriptWidgets-1.0.0/get_animatedJavascriptWidgets_javascript.php http://mediabeez.ws/code/libraries_rv/ultiCache-0.1.0/get_ultiCache_javascript.php?gotAnimatedJavascript=true are greater than one second which is slow. These are cached objects and should load much faster the second time you call the page -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP]make error
2012/3/23 黄昭源 : > Hello, I have a problem. > When I configure php with the parameter --with-mysql=/usr/local/mysql and > make, some errors happen. Below is the errors: > ext/mysql/php_mysql.c:995: undefined reference to `_mysqlnd_init' > ext/mysql/php_mysql.c:1012: undefined reference to `mysqlnd_connect' > ext/mysql/php_mysql.c:876: undefined reference to `_mysqlnd_init' > ... > and so on. > Is there someone also come across this? Can anyone help me? Thanks! Sounds like you're missing the MySQL headers from the source library. You can either download the full source or install just the headers via your system's package manager. If you need more help, let us know what distribution you're using. -- Network Infrastructure Manager http://www.php.net/ -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Re: Got HTML5 History API + caching LICKED, I think,
> Did I accidentally subscribe to the mediabeez website development > mailing list? Hello? Rene, it's true. ^^^ We'd all LOVE to have an expert list to test our site dev for us... and it can even seem to be the case because people are so helpful and certainly help with any specific question.. but by now people are wondering, what does this thread have to do with PHP? This is a list for PHP tips/tricks/questions, etc. Maybe there is an online service somewhere that connects people who want to trade expert technical critique? Thanks, -Govinda -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] foreach weirdness
The following snippet is copied from the php manual:
foreach ($arr as $key => $value) {
echo "Key: $key; Value: $value\n";
}
I've always used the foreach loop that way.
But recently I started hitting some really odd problems.
See this following example that illustrates the problem:
$array = array(0, 1, 2, 3, 4, 5, 6);
foreach ($array as $index=>$value) {
if ( ($index+1) < count($array) ) {
$array[$index+1] += $value;
}
echo $value." ";
}
echo "";
foreach ($array as $index=>$value) {
echo $value." ";
}
You'd expect the output to be:
0 1 3 6 10 15 21
0 1 3 6 10 15 21
But it's actually:
0 1 2 3 4 5 6
0 1 3 5 7 9 11
If you assign the $value by reference in the first loop as someone pointed
out (and confirmed by the manual: "As of PHP 5, you can easily modify
array's elements by preceding $value with &. This will assign reference
instead of copying the value")
$array = array(0, 1, 2, 3, 4, 5, 6);
foreach ($array as $index=>&$value) {// <- assign $value by reference
if ( ($index+1) < count($array) ) {
$array[$index+1] += $value;
}
echo $value." ";
}
echo "";
foreach ($array as $index=>$value) {
echo $value." ";
}
it still does not produce the correct result:
0 1 3 6 10 15 21
0 1 3 6 10 15 15
If I watch the $array in a debugger I see odd behaviour for the last element
$array[6] when stepping through the second foreach loop.
Just before entering the second loop $array[6] == 21 which is correct.
When I move to the next line (echo $value." ";) $array[6] changes to 0 !!
As I step through the second loop $array[6] keeps on changing for each
iteration, with the following values:
0, 1, 3, 6, 10, 15, 15
And once I've left the second loop $array[6] is permanently changed from 21
to 15, even though there's no code in the second loop to change $array[6].
So what's going on here?
I confirm this by echoing $array[6] in each iteration in the second loop:
$array = array(0, 1, 2, 3, 4, 5, 6);
foreach ($array as $index=>&$value) {
if ( ($index+1) < count($array) ) {
$array[$index+1] += $value;
}
echo $value." ";
}
echo "";
foreach ($array as $index=>$value) {
echo $array[6]." ";
}
echo "";
echo $array[6];
the result is:
0 1 3 6 10 15 21
0 1 3 6 10 15 15
15
Note that $array[6] is still 15 even after completing the second foreach
loop.
If you break out of the second loop then $array[6] will be at whatever value
it was at the time you break out (ouch!)
If you assign the $value by reference in the second loop as well:
$array = array(0, 1, 2, 3, 4, 5, 6);
foreach ($array as $index=>&$value) {
if ( ($index+1) < count($array) ) {
$array[$index+1] += $value;
}
echo $value." ";
}
echo "";
foreach ($array as $index=>&$value) {// <- assign $value by reference
echo $array[6]." ";
}
echo "";
echo $array[6];
you finally get the correct result:
0 1 3 6 10 15 21
21 21 21 21 21 21 21
21
You can test this with multiple foreach loops and get the same results. If
you modify the array in the first foreach loop, then use an assign $value by
reference in the next 9 foreach loops to get the correct values (without
modifying the array), and then in the 10th foreach loop you don't use an
assign $value by reference (without modifying the array), the array becomes
corrupted.
I sort of understand the need to assign the $value by reference in the first
loop, but why is it also required in every subsequent loop where the array
is not being modified? Especially since all the examples in the manual show
it's not needed? It would appear that once you've modified an array's
elements in a foreach loop you always have to assign $value by reference in
any subsequent foreach loop using that array. And if you don't, not only
will you get the wrong results but the array itself is actually altered,
even if there's no code in the loop to alter it. Is that correct or is it a
bug? At what stage can you start using the array in the "normal" way again?
That could create hair-pulling havoc for anyone maintaining code if they
haven't noticed that somewhere previously there was code that modified the
array in a foreach loop. Maybe the answer is to always assign $value by
reference in a foreach loop regardless of what you do in that loop, but I'm
not sure what the implications are.
Cheers
Arno
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] foreach weirdness
On 12-03-23 11:16 AM, Arno Kuhl wrote:
The following snippet is copied from the php manual:
foreach ($arr as $key => $value) {
echo "Key: $key; Value: $value\n";
}
I've always used the foreach loop that way.
But recently I started hitting some really odd problems.
See this following example that illustrates the problem:
$array = array(0, 1, 2, 3, 4, 5, 6);
foreach ($array as $index=>$value) {
if ( ($index+1)< count($array) ) {
$array[$index+1] += $value;
}
echo $value." ";
}
echo "";
foreach ($array as $index=>$value) {
echo $value." ";
}
You'd expect the output to be:
0 1 3 6 10 15 21
0 1 3 6 10 15 21
But it's actually:
0 1 2 3 4 5 6
0 1 3 5 7 9 11
This is what I would expect since the value is a copy. As such, one
would expect it to be the value before you made modifications to the array.
If you assign the $value by reference in the first loop as someone pointed
out (and confirmed by the manual: "As of PHP 5, you can easily modify
array's elements by preceding $value with&. This will assign reference
instead of copying the value")
$array = array(0, 1, 2, 3, 4, 5, 6);
foreach ($array as $index=>&$value) {//<- assign $value by reference
if ( ($index+1)< count($array) ) {
$array[$index+1] += $value;
}
echo $value." ";
}
echo "";
foreach ($array as $index=>$value) {
echo $value." ";
}
it still does not produce the correct result:
0 1 3 6 10 15 21
0 1 3 6 10 15 15
This looks like a bug... the last row should be the same. What version
of PHP are you using? Have you checked the online bug reports?
If I watch the $array in a debugger I see odd behaviour for the last element
$array[6] when stepping through the second foreach loop.
Just before entering the second loop $array[6] == 21 which is correct.
When I move to the next line (echo $value." ";) $array[6] changes to 0 !!
As I step through the second loop $array[6] keeps on changing for each
iteration, with the following values:
0, 1, 3, 6, 10, 15, 15
And once I've left the second loop $array[6] is permanently changed from 21
to 15, even though there's no code in the second loop to change $array[6].
So what's going on here?
I confirm this by echoing $array[6] in each iteration in the second loop:
$array = array(0, 1, 2, 3, 4, 5, 6);
foreach ($array as $index=>&$value) {
if ( ($index+1)< count($array) ) {
$array[$index+1] += $value;
}
echo $value." ";
}
echo "";
foreach ($array as $index=>$value) {
echo $array[6]." ";
}
echo "";
echo $array[6];
the result is:
0 1 3 6 10 15 21
0 1 3 6 10 15 15
15
Note that $array[6] is still 15 even after completing the second foreach
loop.
If you break out of the second loop then $array[6] will be at whatever value
it was at the time you break out (ouch!)
If you assign the $value by reference in the second loop as well:
$array = array(0, 1, 2, 3, 4, 5, 6);
foreach ($array as $index=>&$value) {
if ( ($index+1)< count($array) ) {
$array[$index+1] += $value;
}
echo $value." ";
}
echo "";
foreach ($array as $index=>&$value) {//<- assign $value by reference
echo $array[6]." ";
}
echo "";
echo $array[6];
you finally get the correct result:
0 1 3 6 10 15 21
21 21 21 21 21 21 21
21
You can test this with multiple foreach loops and get the same results. If
you modify the array in the first foreach loop, then use an assign $value by
reference in the next 9 foreach loops to get the correct values (without
modifying the array), and then in the 10th foreach loop you don't use an
assign $value by reference (without modifying the array), the array becomes
corrupted.
I sort of understand the need to assign the $value by reference in the first
loop, but why is it also required in every subsequent loop where the array
is not being modified? Especially since all the examples in the manual show
it's not needed? It would appear that once you've modified an array's
elements in a foreach loop you always have to assign $value by reference in
any subsequent foreach loop using that array. And if you don't, not only
will you get the wrong results but the array itself is actually altered,
even if there's no code in the loop to alter it. Is that correct or is it a
bug? At what stage can you start using the array in the "normal" way again?
That could create hair-pulling havoc for anyone maintaining code if they
haven't noticed that somewhere previously there was code that modified the
array in a foreach loop. Maybe the answer is to always assign $value by
reference in a foreach loop regardless of what you do in that loop, but I'm
not sure what the implications are.
Here's how you should do it (IMHO) to avoid all sorts of side effects,
magic behaviour, and unnecessary complications:
Cheers,
Rob.
--
E-Mail Disclaimer: Information contained in this message and any
attached documents is considered confidential and legal
Re: [PHP]make error
I use php-5.4.0.tar.bz2 and MySQL-5.5.21-1.el6.src.rpm in CentOS 6.2. But I can find the MySQL headers in the MySQL source I used. Is there anything wrong with my installing MySQL? 2012/3/23 Daniel Brown > 2012/3/23 黄昭源 : > > Hello, I have a problem. > > When I configure php with the parameter --with-mysql=/usr/local/mysql and > > make, some errors happen. Below is the errors: > > ext/mysql/php_mysql.c:995: undefined reference to `_mysqlnd_init' > > ext/mysql/php_mysql.c:1012: undefined reference to `mysqlnd_connect' > > ext/mysql/php_mysql.c:876: undefined reference to `_mysqlnd_init' > > ... > > and so on. > > Is there someone also come across this? Can anyone help me? Thanks! > > Sounds like you're missing the MySQL headers from the source > library. You can either download the full source or install just the > headers via your system's package manager. If you need more help, let > us know what distribution you're using. > > -- > > Network Infrastructure Manager > http://www.php.net/ > -- 黄昭源(Asher Wong) *Best Wishes To You！*
Re: [PHP]make error
I use php-5.4.0.tar.bz2 and MySQL-5.5.21-1.el6.src.rpm in CentOS 6.2. But I can find the MySQL headers in the MySQL source I used. Is there anything wrong with my installing MySQL? > 2012/3/23 Daniel Brown > >> 2012/3/23 黄昭源 : >> > Hello, I have a problem. >> > When I configure php with the parameter --with-mysql=/usr/local/mysql >> and >> > make, some errors happen. Below is the errors: >> > ext/mysql/php_mysql.c:995: undefined reference to `_mysqlnd_init' >> > ext/mysql/php_mysql.c:1012: undefined reference to `mysqlnd_connect' >> > ext/mysql/php_mysql.c:876: undefined reference to `_mysqlnd_init' >> > ... >> > and so on. >> > Is there someone also come across this? Can anyone help me? Thanks! >> >> Sounds like you're missing the MySQL headers from the source >> library. You can either download the full source or install just the >> headers via your system's package manager. If you need more help, let >> us know what distribution you're using. >> >> -- >> >> Network Infrastructure Manager >> http://www.php.net/ >> > > > > -- > 黄昭源(Asher Wong) > *Best Wishes To You！* > > -- 黄昭源(Asher Wong) *Best Wishes To You！*
[PHP] Re: make error
On 23/03/2012 16:58, Asher Wong wrote: > I use php-5.4.0.tar.bz2 and MySQL-5.5.21-1.el6.src.rpm in CentOS 6.2. But I > can find the MySQL headers in the MySQL source I used. Is there anything > wrong with my installing MySQL? Hi, You can just install the mysql headers via the devel package if you don't need the server: # yum install mysql-devel If you want to find where they were installed use: # find / -name mysql.h Regards Ian -- > > > >> 2012/3/23 Daniel Brown >> >>> 2012/3/23 黄昭源 : Hello, I have a problem. When I configure php with the parameter --with-mysql=/usr/local/mysql >>> and make, some errors happen. Below is the errors: ext/mysql/php_mysql.c:995: undefined reference to `_mysqlnd_init' ext/mysql/php_mysql.c:1012: undefined reference to `mysqlnd_connect' ext/mysql/php_mysql.c:876: undefined reference to `_mysqlnd_init' ... and so on. Is there someone also come across this? Can anyone help me? Thanks! >>> >>> Sounds like you're missing the MySQL headers from the source >>> library. You can either download the full source or install just the >>> headers via your system's package manager. If you need more help, let >>> us know what distribution you're using. >>> >>> -- >>> >>> Network Infrastructure Manager >>> http://www.php.net/ >>> >> >> >> >> -- >> 黄昭源(Asher Wong) >> *Best Wishes To You！* >> >> > > -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Re: make error
I have installed the MySQL-devel and I can find mysql.h, but I still have the error I mentioned above. ext/mysql/php_mysql.c:995: undefined reference to `_mysqlnd_init' ext/mysql/php_mysql.c:1012: undefined reference to `mysqlnd_connect' ext/mysql/php_mysql.c:876: undefined reference to `_mysqlnd_init' ... and so on. > Hi, > > You can just install the mysql headers via the devel package if you > don't need the server: > > # yum install mysql-devel > > > If you want to find where they were installed use: > > # find / -name mysql.h > > Regards > > Ian > -- > -- 黄昭源(Asher Wong) *Best Wishes To You！*
Re: [PHP] Re: make error
2012/3/23 Asher Wong : > I have installed the MySQL-devel and I can find mysql.h, but I still have > the error I mentioned above. > ext/mysql/php_mysql.c:995: undefined reference to `_mysqlnd_init' > ext/mysql/php_mysql.c:1012: undefined reference to `mysqlnd_connect' > ext/mysql/php_mysql.c:876: undefined reference to `_mysqlnd_init' You're using the native driver, so try this instead: --with-mysql=mysqlnd -- Network Infrastructure Manager http://www.php.net/ -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Re: make error
I trid, but it didn't work. 2012/3/24 Daniel Brown > 2012/3/23 Asher Wong : > > I have installed the MySQL-devel and I can find mysql.h, but I still have > > the error I mentioned above. > > ext/mysql/php_mysql.c:995: undefined reference to `_mysqlnd_init' > > ext/mysql/php_mysql.c:1012: undefined reference to `mysqlnd_connect' > > ext/mysql/php_mysql.c:876: undefined reference to `_mysqlnd_init' > > You're using the native driver, so try this instead: > >--with-mysql=mysqlnd > > -- > > Network Infrastructure Manager > http://www.php.net/ > -- 黄昭源(Asher Wong) *Best Wishes To You！*
Re: [PHP] Re: make error
I tried, but it didn't work. 2012/3/24 Daniel Brown > 2012/3/23 Asher Wong : > > I have installed the MySQL-devel and I can find mysql.h, but I still have > > the error I mentioned above. > > ext/mysql/php_mysql.c:995: undefined reference to `_mysqlnd_init' > > ext/mysql/php_mysql.c:1012: undefined reference to `mysqlnd_connect' > > ext/mysql/php_mysql.c:876: undefined reference to `_mysqlnd_init' > > You're using the native driver, so try this instead: > >--with-mysql=mysqlnd > > -- > > Network Infrastructure Manager > http://www.php.net/ > -- 黄昭源(Asher Wong) *Best Wishes To You！*
Re: [PHP] Re: make error
Now I use the command below to configure php: ./configure --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql=mysqlnd --with-mysql=/usr/local/mysql/bin/mysql_config --with-mysqli=mysqlnd --with-pdo-mysql=myslqnd And the error happened: configure: error: Cannot find MySQL header files under /usr/local/mysql/bin/mysql_config. -- 黄昭源(Asher Wong) *Best Wishes To You！*
Re: [PHP] Re: make error
Now I use the command below to configure php: ./configure --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql=mysqlnd --with-mysql=/usr/local/mysql/bin/mysql_config --with-mysqli=mysqlnd --with-pdo-mysql=myslqnd And the error happened: configure: error: Cannot find MySQL header files under /usr/local/mysql/bin/mysql_config. Note that the MySQL client library is not bundled anymore! -- 黄昭源(Asher Wong) *Best Wishes To You！*
Re: [PHP] Re: make error
2012/3/23 Asher Wong : > Now I use the command below to configure php: > ./configure --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql=mysqlnd > --with-mysql=/usr/local/mysql/bin/mysql_config --with-mysqli=mysqlnd > --with-pdo-mysql=myslqnd > > And the error happened: > configure: error: Cannot find MySQL header files under > /usr/local/mysql/bin/mysql_config. > Note that the MySQL client library is not bundled anymore! Drop this: --with-mysql=/usr/local/mysql/bin/mysql_config and please only send one reply. I keep getting your first reply, then a second reply one or two minutes later. -- Network Infrastructure Manager http://www.php.net/ -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Re: make error
I droped it but now the new error happened: checking for mysql_config... not found configure: error: Unable to find your mysql installation And I'm sorry to send more than one reply. Maybe there are something wrong with the network here. 2012/3/24 Daniel Brown > 2012/3/23 Asher Wong : > > Now I use the command below to configure php: > > ./configure --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql=mysqlnd > > --with-mysql=/usr/local/mysql/bin/mysql_config --with-mysqli=mysqlnd > > --with-pdo-mysql=myslqnd > > > > And the error happened: > > configure: error: Cannot find MySQL header files under > > /usr/local/mysql/bin/mysql_config. > > Note that the MySQL client library is not bundled anymore! > > Drop this: > >--with-mysql=/usr/local/mysql/bin/mysql_config > > and please only send one reply. I keep getting your first > reply, then a second reply one or two minutes later. > > -- > > Network Infrastructure Manager > http://www.php.net/ > -- 黄昭源(Asher Wong) *Best Wishes To You！*
Re: [PHP] Re: make error
2012/3/23 Asher Wong : > I droped it but now the new error happened: > checking for mysql_config... not found > configure: error: Unable to find your mysql installation Try: locate mysql_config > And I'm sorry to send more than one reply. Maybe there are something wrong > with the network here. No problem. I thought it may have been deliberate because of the intermission between messages. Not a big deal at all. -- Network Infrastructure Manager http://www.php.net/ -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Re: make error
> > This is the result of "locate mysql_config": > [zhaoyuan@localhost php-5.4.0]$ locate mysql_config /home/zhaoyuan/下载/MySQL-5.5.21-1.el6.src/mysql-5.5.21/man/mysql_config.1 /home/zhaoyuan/下载/MySQL-5.5.21-1.el6.src/mysql-5.5.21/scripts/mysql_config /home/zhaoyuan/下载/MySQL-5.5.21-1.el6.src/mysql-5.5.21/scripts/ mysql_config.pl.in /home/zhaoyuan/下载/MySQL-5.5.21-1.el6.src/mysql-5.5.21/scripts/mysql_config.sh /usr/bin/mysql_config /usr/local/mysql/bin/mysql_config /usr/local/mysql/man/man1/mysql_config.1 /usr/share/man/man1/mysql_config.1.gz -- 黄昭源(Asher Wong) *Best Wishes To You！*
RE: [PHP] foreach weirdness
-Original Message-
From: Robert Cummings [mailto:rob...@interjinn.com]
Sent: 23 March 2012 06:11 PM
To: a...@dotcontent.net
Cc: php-general@lists.php.net
Subject: Re: [PHP] foreach weirdness
On 12-03-23 11:16 AM, Arno Kuhl wrote:
> The following snippet is copied from the php manual:
> foreach ($arr as $key => $value) {
> echo "Key: $key; Value: $value\n"; }
>
> I've always used the foreach loop that way.
> But recently I started hitting some really odd problems.
>
> See this following example that illustrates the problem:
> $array = array(0, 1, 2, 3, 4, 5, 6);
> foreach ($array as $index=>&$value) {//<- assign $value by reference
> if ( ($index+1)< count($array) ) {
> $array[$index+1] += $value;
> }
> echo $value." ";
> }
> echo "";
> foreach ($array as $index=>$value) {
> echo $value." ";
> }
>
> it still does not produce the correct result:
> 0 1 3 6 10 15 21
> 0 1 3 6 10 15 15
This looks like a bug... the last row should be the same. What version of PHP
are you using? Have you checked the online bug reports?
.
--
Hi Rob
I'm using php 5.3.5. What result do you get when you run this code?
I haven't checked any bug reports, I'll google to see where I would do that.
Your code gets round the problem, but I was specifically referring to the use
of foreach with its unexpected side-effects. There are a few different designs
like look-ahead where it seemed the obvious way to go. I know I've used this
type of foreach coding in the past, and have this nagging feeling there's a
whole bunch of code just waiting to explode. I always just assumed it worked
because it's pretty simple. I'd previously been caught out forgetting the
assign by reference in the foreach loop that modified the array but I always
caught it long before it went live, but I never considered having to also use
assign by reference in subsequent foreach loops because it so obviously wasn't
necessary. Now I'm searching through my scripts to see if there are any
potential problems caused by this (already found one), and wondering what else
I've done where I no longer have access to the sources.
BTW I'm told on another forum this issue has been discussed multiple times on
this mailing list - did I miss it? Was there a resolution?
Cheers
Arno
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
[snip] > Your data structure doesn't appear to be very ummm normalized... Nonetheless, > the following should do it: [/snip] You're absolutely correct. Unfortunately I am not the designer and cannot really do anything about it. I just have to work with what I have. Thank you very much for this - I will test it out this afternoon and let you know how it all goes. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
On 12-03-23 02:08 PM, Jay Blanchard wrote: [snip] Your data structure doesn't appear to be very ummm normalized... Nonetheless, the following should do it: [/snip] You're absolutely correct. Unfortunately I am not the designer and cannot really do anything about it. I just have to work with what I have. Thank you very much for this - I will test it out this afternoon and let you know how it all goes. I figured it was something you had been given... just thought I'd point out the obvious >:D Cheers, Rob. -- E-Mail Disclaimer: Information contained in this message and any attached documents is considered confidential and legally protected. This message is intended solely for the addressee(s). Disclosure, copying, and distribution are prohibited unless authorized. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
[snip]
>$json = JSON_encode( $root );
[/snip]
Update on my test. This works perfectly Robert - thank you very much! But there
is one small problem that I am trouble-shooting: it only goes one layer and
doesn't progress any further. I suspect it is on this section of code that I am
going to add some stuff to to see what is happening.
if( !($parents = &$children) ){
break;
}
Re: [PHP] Thinking out loud - a continuation...
> [snip]
>> $json = JSON_encode( $root );
> [/snip]
>
> Update on my test. This works perfectly Robert - thank you very much! But
> there is one small problem that I am trouble-shooting: it only goes one layer
> and doesn't progress any further. I suspect it is on this section of code
> that I am going to add some stuff to to see what is happening.
>
> if( !($parents = &$children) ){
> break;
> }
It would appear that both arrays are empty on the next cycle through so the
break occurs.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
On 12-03-23 03:17 PM, Jay Blanchard wrote:
[snip]
$json = JSON_encode( $root );
[/snip]
Update on my test. This works perfectly Robert - thank you very much! But there
is one small problem that I am trouble-shooting: it only goes one layer and
doesn't progress any further. I suspect it is on this section of code that I am
going to add some stuff to to see what is happening.
if( !($parents =&$children) ){
break;
}
I didn't actually test it... if you have trouble figuring out the
problem feel free to send me a copy of your table (in private) and I'll
debug :)
Cheers,
Rob.
--
E-Mail Disclaimer: Information contained in this message and any
attached documents is considered confidential and legally protected.
This message is intended solely for the addressee(s). Disclosure,
copying, and distribution are prohibited unless authorized.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
On 12-03-23 03:22 PM, Jay Blanchard wrote:
[snip]
$json = JSON_encode( $root );
[/snip]
Update on my test. This works perfectly Robert - thank you very much! But there
is one small problem that I am trouble-shooting: it only goes one layer and
doesn't progress any further. I suspect it is on this section of code that I am
going to add some stuff to to see what is happening.
if( !($parents =&$children) ){
break;
}
It would appear that both arrays are empty on the next cycle through so the
break occurs.
Did you get any results form the database on the second run through the
query loop?
Cheers,
Rob.
--
E-Mail Disclaimer: Information contained in this message and any
attached documents is considered confidential and legally protected.
This message is intended solely for the addressee(s). Disclosure,
copying, and distribution are prohibited unless authorized.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] foreach weirdness
On 12-03-23 02:04 PM, Arno Kuhl wrote: Hi Rob I'm using php 5.3.5. What result do you get when you run this code? I haven't checked any bug reports, I'll google to see where I would do that. Your code gets round the problem, but I was specifically referring to the use of foreach with its unexpected side-effects. I know... but when I first started doing things like what you tried to do, there were no references for foreach values and so I've just naturally been in the habit of explicitly accessing the values in the array by index. Apparently that will serve me well since my stuff won't blow up with this bug ;) There are a few different designs like look-ahead where it seemed the obvious way to go. I know I've used this type of foreach coding in the past, and have this nagging feeling there's a whole bunch of code just waiting to explode. I always just assumed it worked because it's pretty simple. I'd previously been caught out forgetting the assign by reference in the foreach loop that modified the array but I always caught it long before it went live, but I never considered having to also use assign by reference in subsequent foreach loops because it so obviously wasn't necessary. Now I'm searching through my scripts to see if there are any potential problems caused by this (already found one), and wondering what else I've done where I no longer have access to the sources. BTW I'm told on another forum this issue has been discussed multiple times on this mailing list - did I miss it? Was there a resolution? I must have missed it too... but then I've not been very active in the past year or so :) Cheers, Rob. -- E-Mail Disclaimer: Information contained in this message and any attached documents is considered confidential and legally protected. This message is intended solely for the addressee(s). Disclosure, copying, and distribution are prohibited unless authorized. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
On Mar 23, 2012, at 2:25 PM, Robert Cummings wrote:
> On 12-03-23 03:17 PM, Jay Blanchard wrote:
>> [snip]
>>>$json = JSON_encode( $root );
>> [/snip]
>>
>> Update on my test. This works perfectly Robert - thank you very much! But
>> there is one small problem that I am trouble-shooting: it only goes one
>> layer and doesn't progress any further. I suspect it is on this section of
>> code that I am going to add some stuff to to see what is happening.
>>
>> if( !($parents =&$children) ){
>>break;
>>}
>
> I didn't actually test it... if you have trouble figuring out the problem
> feel free to send me a copy of your table (in private) and I'll debug :)
I had it backwards. Both arrays are empty and the break should not occur
because they are equal to each other. Let me send you a portion of the table
Robert.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
On 12-03-23 03:28 PM, Jay Blanchard wrote:
On Mar 23, 2012, at 2:25 PM, Robert Cummings wrote:
On 12-03-23 03:17 PM, Jay Blanchard wrote:
[snip]
$json = JSON_encode( $root );
[/snip]
Update on my test. This works perfectly Robert - thank you very much! But there
is one small problem that I am trouble-shooting: it only goes one layer and
doesn't progress any further. I suspect it is on this section of code that I am
going to add some stuff to to see what is happening.
if( !($parents =&$children) ){
break;
}
I didn't actually test it... if you have trouble figuring out the problem feel
free to send me a copy of your table (in private) and I'll debug :)
I had it backwards. Both arrays are empty and the break should not occur
because they are equal to each other. Let me send you a portion of the table
Robert.
No, I'm performing assignment... intentionally. Parent's becomes the
previous children to move down a level. The following:
if( !($parents = &$children) )
performs assignment and an empty array check in one statement.
Cheers,
Rob.
--
E-Mail Disclaimer: Information contained in this message and any
attached documents is considered confidential and legally protected.
This message is intended solely for the addressee(s). Disclosure,
copying, and distribution are prohibited unless authorized.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
[snip]
> Did you get any results form the database on the second run through the query
> loop?
[/snip]
Actually, no. I just ran the raw query -
SELECT DISTINCT `TIER3DATA` AS id, `TIER2DATA` AS parentId FROM
`POSITION_SETUP` WHERE `COMPANY_ID` = '3' AND `TIER2DATA` IN ('Executives and
Management','Professionals','Technicians','Craft
Workers-Skilled','Operatives','Contractor','Sales Workers','Laborers and
Helpers','Admin Support')
and it is empty.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
[snip] > No, I'm performing assignment... intentionally. Parent's becomes the previous > children to move down a level. The following: > >if( !($parents = &$children) ) > > performs assignment and an empty array check in one statement. [/snip] Gotcha'. So all I am ever getting back right now is the result of the first query. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
> [snip]
> SELECT DISTINCT `TIER3DATA` AS id, `TIER2DATA` AS parentId FROM
> `POSITION_SETUP` WHERE `COMPANY_ID` = '3' AND `TIER2DATA` IN ('Executives and
> Management','Professionals','Technicians','Craft
> Workers-Skilled','Operatives','Contractor','Sales Workers','Laborers and
> Helpers','Admin Support')
>
> and it is empty.
[/snip]
I figured out part of the problem - the for loop starts at tier2 instead of
tier1
Once I made that change I get the following error:
Fatal error: Cannot use string offset as an array in
/home/orcadept/public_html/poschart/json_chart.php on line 139
Line 139 is $item['children'][$id] = &$child;
Re: [PHP] Thinking out loud - a continuation...
On 12-03-23 03:52 PM, Jay Blanchard wrote:
[snip]
SELECT DISTINCT `TIER3DATA` AS id, `TIER2DATA` AS parentId FROM
`POSITION_SETUP` WHERE `COMPANY_ID` = '3' AND `TIER2DATA` IN ('Executives and
Management','Professionals','Technicians','Craft
Workers-Skilled','Operatives','Contractor','Sales Workers','Laborers and
Helpers','Admin Support')
and it is empty.
[/snip]
I figured out part of the problem - the for loop starts at tier2 instead of
tier1
It's meant to since outside the loop we address tier 1 when we generate
the root and first set of parents (These have no parent ID so they are a
special case).
Once I made that change I get the following error:
Fatal error: Cannot use string offset as an array in
/home/orcadept/public_html/poschart/json_chart.php on line 139
Line 139 is $item['children'][$id] =&$child;
$item['children'] should be an array, somehow a string has been assigned :/
Cheers,
Rob.
--
E-Mail Disclaimer: Information contained in this message and any
attached documents is considered confidential and legally protected.
This message is intended solely for the addressee(s). Disclosure,
copying, and distribution are prohibited unless authorized.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
[snip] > $item['children'] should be an array, somehow a string has been assigned :/ [/snip] Yep. I am trying to figure that out now. I'm sure it is something really small. BTW, after making the change to the for loop there are results returned as we expected. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
> [snip] >> $item['children'] should be an array, somehow a string has been assigned :/ > [/snip] > > Yep. I am trying to figure that out now. I'm sure it is something really > small. [/snip] I have been hammering away at it for a while now and still cannot find the issue. I'll push away for a while and come back to it. Robert I owe you so many thinks for getting me this far and opening me up to making this more efficient. I just have to push on through and get to the point where the JSON can be created and consumed. If any light bulb goes on over your head would you let me know. I have tried everything that I know works to keep this from being a string - I am just missing something. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
[snip]
…stuff….
[/snip]
For those interested here is where the problem seems to occur -
$child = array
(
'id' => $id,
'parentId' => $pid,
'children' => array()
);
$children[$id][] = &$child;
foreach( $parents[$pid] as &$items ){
foreach( $items as &$item ){
$item['children'][$id] = &$child; // error: Cannot use
string offset as an array
}
}
Maybe someone will see this and know what's going on. Before the foreach
$children is an array.
Re: [PHP] foreach weirdness
2012/3/23 Robert Cummings > > On 12-03-23 11:16 AM, Arno Kuhl wrote: >> >> >> it still does not produce the correct result: >> 0 1 3 6 10 15 21 >> 0 1 3 6 10 15 15 > > > This looks like a bug... the last row should be the same. What version of > PHP are you using? Have you checked the online bug reports? > > Hi, Robert Does not seem like a bug to me ... http://schlueters.de/blog/archives/141-References-and-foreach.html What you should do to get the expected result: Unset the variable after you don't need this reference any longer. Bye Simon -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] foreach weirdness
On 12-03-23 06:30 PM, Simon Schick wrote: 2012/3/23 Robert Cummings On 12-03-23 11:16 AM, Arno Kuhl wrote: it still does not produce the correct result: 0 1 3 6 10 15 21 0 1 3 6 10 15 15 This looks like a bug... the last row should be the same. What version of PHP are you using? Have you checked the online bug reports? Hi, Robert Does not seem like a bug to me ... http://schlueters.de/blog/archives/141-References-and-foreach.html What you should do to get the expected result: Unset the variable after you don't need this reference any longer. Ah yes... that clued me in. I disagree with the article's generalization with respect to references since references accomplish some things that cannot be accomplished otherwise, but even I missed the fact that the second loop was using a variable that was a reference to the last element of the array as created in the first loop *lol*. The user's very act of checking their results was confounding the result... I love it :) Cheers, Rob. -- E-Mail Disclaimer: Information contained in this message and any attached documents is considered confidential and legally protected. This message is intended solely for the addressee(s). Disclosure, copying, and distribution are prohibited unless authorized. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
On 12-03-23 05:26 PM, Jay Blanchard wrote: [snip] $item['children'] should be an array, somehow a string has been assigned :/ [/snip] Yep. I am trying to figure that out now. I'm sure it is something really small. [/snip] I have been hammering away at it for a while now and still cannot find the issue. I'll push away for a while and come back to it. Robert I owe you so many thinks for getting me this far and opening me up to making this more efficient. I just have to push on through and get to the point where the JSON can be created and consumed. If any light bulb goes on over your head would you let me know. I have tried everything that I know works to keep this from being a string - I am just missing something. Hi Jay, Did you send me a sample dump for your table :) Cheers, Rob. -- E-Mail Disclaimer: Information contained in this message and any attached documents is considered confidential and legally protected. This message is intended solely for the addressee(s). Disclosure, copying, and distribution are prohibited unless authorized. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Thinking out loud - a continuation...
On 12-03-23 05:41 PM, Jay Blanchard wrote:
[-- DELETED GARBAGE --] :)
I just realized... I've been stuck in a thinking rut. I latched onto one
solution that works well in some case but didn't fully examine the
nuances of your own scenario. Given the way you are creating your
hierarchy you will ultimately retrieve all rows. As such the following
simple solution will do what you need:
query( $query ) )
{
while( ($row = $db->fetchRow()) )
{
$focus = &$root;
for( $i = 1; $i <= 14; $i++ )
{
$name = $row['tier'.$i];
if( !isset( $focus[$name] ) )
{
$focus[$name] = array();
}
$focus = &$focus[$name];
}
}
}
$json = JSON_encode( $root );
?>
Cheers,
Rob.
--
E-Mail Disclaimer: Information contained in this message and any
attached documents is considered confidential and legally protected.
This message is intended solely for the addressee(s). Disclosure,
copying, and distribution are prohibited unless authorized.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
