[Kernel-packages] [Bug 1436940] Re: Atheros wifi 168c:0041(QCA6164) is not supported

[Ryan]

Hi Diego,

Still no luck (copied the QCA6164 firmware.bin and board.bin to
QCA6174/hw2.1/) but I am getting different outputs on dmesg.

"dmesg | grep -i ath"

[2.014702]  [] warn_slowpath_common+0x8a/0xc0
[2.014704]  [] warn_slowpath_fmt+0x46/0x50
[2.076696] ath10k_pci :02:00.0: pci irq msi-x interrupts 8 irq_mode 0 
reset_mode 0
[2.264949] ath10k_pci :02:00.0: Direct firmware load for 
ath10k/cal-pci-:02:00.0.bin failed with error -2
[2.265161] ath10k_pci :02:00.0: Direct firmware load for 
ath10k/QCA6174/hw2.1/board-pci-168c:0041:17aa:3545.bin failed with error -2
[2.265162] ath10k_pci :02:00.0: failed to load spec board file, falling 
back to generic: -2
[3.437786] ath10k_pci :02:00.0: received unsolicited fw crash interrupt
[3.437794] ath10k_pci :02:00.0: received unsolicited fw crash interrupt
[4.436590] ath10k_pci :02:00.0: failed to receive control response 
completion, polling..
[4.436912] ath10k_pci :02:00.0: received unsolicited fw crash interrupt
[4.437024] ath10k_pci :02:00.0: received unsolicited fw crash interrupt
[5.437385] ath10k_pci :02:00.0: Service connect timeout
[5.437393] ath10k_pci :02:00.0: failed to connect htt (-110)
[5.514369] ath10k_pci :02:00.0: could not init core (-110)
[5.514390] ath10k_pci :02:00.0: could not probe fw (-110)


"dmesg | tail"

[4.437024] ath10k_pci :02:00.0: received unsolicited fw crash interrupt
[4.620546] [drm:gen8_irq_handler [i915]] *ERROR* The master control 
interrupt lied (SDE)!
[5.437385] ath10k_pci :02:00.0: Service connect timeout
[5.437393] ath10k_pci :02:00.0: failed to connect htt (-110)
[5.514369] ath10k_pci :02:00.0: could not init core (-110)
[5.514390] ath10k_pci :02:00.0: could not probe fw (-110)
[6.606130] r8169 :03:00.0 eth0: link up
[9.611721] [drm:gen8_irq_handler [i915]] *ERROR* The master control 
interrupt lied (SDE)!
[9.800304] [drm:gen8_irq_handler [i915]] *ERROR* The master control 
interrupt lied (SDE)!
[9.989036] [drm:gen8_irq_handler [i915]] *ERROR* The master control 
interrupt lied (SDE)!


"lspci -nnk"

02:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0041] (rev 20)
Subsystem: Lenovo Device [17aa:3545]
Kernel driver in use: ath10k_pci

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1436940

Title:
  Atheros wifi 168c:0041(QCA6164) is not supported

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Vivid:
  Confirmed
Status in linux source package in Wily:
  Confirmed

Bug description:
  The atheros wireless device (168c:0041) isn't supported by the
  ath10k_pci kernel driver.

  Found in several laptop models:

  Lenovo Z70
  Lenovo G50-45
  Lenovo G50-80
  Lenovo Edge 15
  Lenovo Yoga 3 11
  Lenovo Flex 3-1470
  Samsung ATIV Book 9 NP930X2K

  ProblemType: BugDistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-9-generic 3.19.0-9.9
  ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1
  Uname: Linux 3.19.0-9-generic x86_64
  ApportVersion: 2.16.2-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nicholas   1695 F pulseaudio
   /dev/snd/controlC1:  nicholas   1695 F pulseaudio
  CurrentDesktop: Unity
  Date: Thu Mar 26 09:47:16 2015
  HibernationDevice: RESUME=UUID=5b068cd8-e60a-49b9-a88e-1581bb6b3dc1
  InstallationDate: Installed on 2015-03-25 (1 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 004: ID 0cf3:e300 Atheros Communications, Inc.
   Bus 001 Device 003: ID 5986:0652 Acer, Inc
   Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card 
Reader Controller
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: LENOVO 80E5
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-9-generic 
root=UUID=e52867c5-0b50-42fb-8288-f30765f926c5 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-9-generic N/A
   linux-backports-modules-3.19.0-9-generic  N/A
   linux-firmware1.143SourcePackage: linux
  UpgradeStatus: Upgraded to vivid on 2015-03-26 (0 days ago)
  dmi.bios.date: 06/20/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: B0CN69WW
  dmi.board.asset.tag: NO Asset Tag
  dmi.board.name: Lenovo G50-80
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058 WIN
  dmi.chassis.asset.tag: NO Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo G50-80
  dmi.modalias: 
dmi:bvnLENOVO:bvrB0CN69WW:bd06/20/2014:svnLENOVO:pn80

[Kernel-packages] [Bug 1434978] Re: HP Zbook 14 G2: systems restart after shutdown

[Martin Konopka]

I am using HP ZBook 15 procured in 2013. It is a dual-boot machine: Windows 7 + 
Linux. The problem began after reinstallation of linux:
- shutdown worked with LinuxMint 17
- shutdown does not work with Ubuntu-MATE 15.04

If I want to poweroff I have to reboot to Windows and issue the shutdown
command from Windows. It works then.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1434978

Title:
  HP Zbook 14 G2: systems restart after shutdown

Status in linux package in Ubuntu:
  Triaged

Bug description:
  When I use the shutdown option in the menu or run "sudo poweroff" on my new 
Zbook 14 G2, the system shuts down and powers up again right after the restart. 
I have to push the power button again during startup to avoid it to restart. 
The system is more or less supported by Ubuntu* and the BIOS is up to date, so 
I thought this is worth a bug report...
  (I don't have a preinstalled system by HP, since I can't buy these here, this 
is an Ubunutu 15.04)

  (*) http://www.ubuntu.com/certification/hardware/201411-16141/

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-9-generic 3.19.0-9.9
  ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1
  Uname: Linux 3.19.0-9-generic x86_64
  ApportVersion: 2.16.2-0ubuntu4
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  luc2523 F pulseaudio
   /dev/snd/controlC0:  luc2523 F pulseaudio
  Date: Sun Mar 22 12:14:35 2015
  InstallationDate: Installed on 2015-03-14 (7 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20150306)
  MachineType: Hewlett-Packard HP ZBook 14 G2
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-9-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-9-generic N/A
   linux-backports-modules-3.19.0-9-generic  N/A
   linux-firmware1.143
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/24/2015
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: M71 Ver. 01.04
  dmi.board.name: 2216
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 96.54
  dmi.chassis.asset.tag: 5CG50946XJ
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrM71Ver.01.04:bd02/24/2015:svnHewlett-Packard:pnHPZBook14G2:pvrA3009FC18303:rvnHewlett-Packard:rn2216:rvrKBCVersion96.54:cvnHewlett-Packard:ct10:cvr:
  dmi.product.name: HP ZBook 14 G2
  dmi.product.version: A3009FC18303
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1434978/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1436940] Re: Atheros wifi 168c:0041(QCA6164) is not supported

[Diego]

Hi,

not sure why your firmware is crashing... You seem to have the exact
same laptop as me (Lenovo 80K90001US, or at least everything seems to
match so far).

You could try editing htc.c (drivers/net/wireless/ath/ath10k) and
commenting out that error to see if it helps (or fails later) but this
is just a guess really... If you open htc.c, and search for "Service
connect timeout", you can try commenting out the next line (line 697)
that says "return -ETIMEDOUT;" (that is basically the -110 you see that
prevents the firmware to load).

You could compile and sudo make install it (but this is just a guess,
hoping it might help out).

By the way, my kernel is:

Linux diego 4.1.0-1-amd64 #1 SMP Debian 4.1.3-1 (2015-08-03) x86_64
GNU/Linux

I'm not sure if maybe you have an older kernel or newer... It might be
some other hardware interfering with it (maybe something I didn't care
to configure) ?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1436940

Title:
  Atheros wifi 168c:0041(QCA6164) is not supported

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Vivid:
  Confirmed
Status in linux source package in Wily:
  Confirmed

Bug description:
  The atheros wireless device (168c:0041) isn't supported by the
  ath10k_pci kernel driver.

  Found in several laptop models:

  Lenovo Z70
  Lenovo G50-45
  Lenovo G50-80
  Lenovo Edge 15
  Lenovo Yoga 3 11
  Lenovo Flex 3-1470
  Samsung ATIV Book 9 NP930X2K

  ProblemType: BugDistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-9-generic 3.19.0-9.9
  ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1
  Uname: Linux 3.19.0-9-generic x86_64
  ApportVersion: 2.16.2-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nicholas   1695 F pulseaudio
   /dev/snd/controlC1:  nicholas   1695 F pulseaudio
  CurrentDesktop: Unity
  Date: Thu Mar 26 09:47:16 2015
  HibernationDevice: RESUME=UUID=5b068cd8-e60a-49b9-a88e-1581bb6b3dc1
  InstallationDate: Installed on 2015-03-25 (1 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 004: ID 0cf3:e300 Atheros Communications, Inc.
   Bus 001 Device 003: ID 5986:0652 Acer, Inc
   Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card 
Reader Controller
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: LENOVO 80E5
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-9-generic 
root=UUID=e52867c5-0b50-42fb-8288-f30765f926c5 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-9-generic N/A
   linux-backports-modules-3.19.0-9-generic  N/A
   linux-firmware1.143SourcePackage: linux
  UpgradeStatus: Upgraded to vivid on 2015-03-26 (0 days ago)
  dmi.bios.date: 06/20/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: B0CN69WW
  dmi.board.asset.tag: NO Asset Tag
  dmi.board.name: Lenovo G50-80
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058 WIN
  dmi.chassis.asset.tag: NO Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo G50-80
  dmi.modalias: 
dmi:bvnLENOVO:bvrB0CN69WW:bd06/20/2014:svnLENOVO:pn80E5:pvrLenovoG50-80:rvnLENOVO:rnLenovoG50-80:rvr31900058WIN:cvnLENOVO:ct10:cvrLenovoG50-80:
  dmi.product.name: 80E5
  dmi.product.version: Lenovo G50-80
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1436940/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1420290]

[Jani-nikula]

Please try v4.2-rc7 or drm-intel-nightly branch of [1], drop all i915
module parameters (such as i915.enable_rc6 i915.enable_fbc
i915.lvds_downclock and i915.semaphores, they are not for regular use),
add drm.debug=14, attach dmesg all the way from early boot.

[1] http://cgit.freedesktop.org/drm-intel

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1420290

Title:
  WARNING: CPU: 0 PID: 2517 at
  /home/kernel/COD/linux/drivers/gpu/drm/i915/intel_display.c:9713
  intel_check_page_flip+0xe6/0xf0 [i915]()

Status in Linux:
  Incomplete
Status in linux package in Ubuntu:
  Confirmed

Bug description:
  Running Vivid with kernel 3.19 (debs from http://kernel.ubuntu.com
  /~kernel-ppa/mainline/v3.19-vivid/), I get the warning below in dmesg.

  I can't use "ubuntu-bug linux" because I get "It appears you are
  currently running a mainline kernel.  It would be better to report
  this bug upstream at http://bugzilla.kernel.org/ so that the upstream
  kernel developers are aware of the issue.  If you'd still like to file
  a bug against the Ubuntu kernel, please boot with an official Ubuntu
  kernel and re-file.". IMHO that last advice would be a DTO (Defeating
  The Objective), as this message does not appear in the 3.18.

  
  $ uname -a
  Linux superstreamer 3.19.0-031900-generic #201502091451 SMP Mon Feb 9 
14:52:52 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

  
  [ 2243.390997] [ cut here ]
  [ 2243.391046] WARNING: CPU: 0 PID: 2517 at 
/home/kernel/COD/linux/drivers/gpu/drm/i915/intel_display.c:9713 
intel_check_page_flip+0xe6/0xf0 [i915]()
  [ 2243.391049] Kicking stuck page flip: queued at 134027, now 134031
  [ 2243.391051] Modules linked in: hid_generic(E) hp_wmi(E) sparse_keymap(E) 
joydev(E) rfcomm(E) bnep(E) intel_rapl(E) intel_soc_dts_thermal(E) 
intel_powerclamp(E) snd_hda_codec_hdmi(E) coretemp(E) kvm_intel(E) 
snd_hda_codec_realtek(E) kvm(E) snd_hda_codec_generic(E) crct10dif_pclmul(E) 
crc32_pclmul(E) ghash_clmulni_intel(E) cryptd(E) arc4(E) rtl8723be(E) 
btcoexist(E) snd_hda_intel(E) usbhid(E) rtl8723_common(E) snd_hda_controller(E) 
rtl_pci(E) serio_raw(E) rtlwifi(E) snd_hda_codec(E) snd_intel_sst_acpi(E) 
nls_iso8859_1(E) snd_hwdep(E) snd_intel_sst_core(E) 
snd_soc_sst_mfld_platform(E) mac80211(E) rtsx_pci_ms(E) snd_seq_midi(E) 
memstick(E) snd_soc_rt5640(E) snd_soc_rl6231(E) snd_seq_midi_event(E) 
cfg80211(E) lpc_ich(E) i915(E) snd_soc_core(E) snd_rawmidi(E) snd_compress(E) 
wmi(E) hp_wireless(E) snd_pcm_dmaengine(E)
  [ 2243.391089]  snd_seq(E) dw_dmac(E) dw_dmac_core(E) int3400_thermal(E) 
snd_seq_device(E) snd_pcm(E) int3403_thermal(E) processor_thermal_device(E) 
acpi_thermal_rel(E) intel_smartconnect(E) video(E) drm_kms_helper(E) drm(E) 
i2c_hid(E) snd_timer(E) hid(E) snd(E) i2c_designware_platform(E) soundcore(E) 
i2c_designware_core(E) i2c_algo_bit(E) shpchp(E) parport_pc(E) 
snd_soc_sst_acpi(E) btusb(E) mei_txe(E) mei(E) rfkill_gpio(E) iosf_mbi(E) 
ppdev(E) spi_pxa2xx_platform(E) bluetooth(E) 8250_dw(E) pwm_lpss_platform(E) 
pwm_lpss(E) lp(E) parport(E) mac_hid(E) mmc_block(E) rtsx_pci_sdmmc(E) 
psmouse(E) rtsx_pci(E) sdhci_acpi(E) sdhci(E)
  [ 2243.391129] CPU: 0 PID: 2517 Comm: Chrome_IOThread Tainted: GE 
 3.19.0-031900-generic #201502091451
  [ 2243.391131] Hardware name: Hewlett-Packard HP Stream Notebook PC 13/802A, 
BIOS F.05 11/28/2014
  [ 2243.391134]  25f1 880076c03630 817c4c00 
0007
  [ 2243.391138]  880076c03680 880076c03670 81076e87 
0748a8c1
  [ 2243.391142]  880036b91000 8800700909a8 880070090800 

  [ 2243.391146] Call Trace:
  [ 2243.391149][] dump_stack+0x45/0x57
  [ 2243.391162]  [] warn_slowpath_common+0x97/0xe0
  [ 2243.391166]  [] warn_slowpath_fmt+0x46/0x50
  [ 2243.391192]  [] intel_check_page_flip+0xe6/0xf0 [i915]
  [ 2243.391214]  [] 
valleyview_pipestat_irq_handler+0x188/0x220 [i915]
  [ 2243.391236]  [] valleyview_irq_handler+0xaf/0x180 [i915]
  [ 2243.391242]  [] ? ip6_finish_output+0x95/0xd0
  [ 2243.391247]  [] handle_irq_event_percpu+0x5d/0x1e0
  [ 2243.391251]  [] ? ip6_xmit+0x22a/0x490
  [ 2243.391255]  [] handle_irq_event+0x48/0x70
  [ 2243.391258]  [] handle_edge_irq+0x7f/0x120
  [ 2243.391263]  [] handle_irq+0x22/0x40
  [ 2243.391267]  [] do_IRQ+0x5c/0x110
  [ 2243.391271]  [] common_interrupt+0x6d/0x6d
  [ 2243.391276]  [] ? tcp_queue_rcv+0x21/0x130
  [ 2243.391280]  [] ? __skb_checksum_complete+0x22/0xd0
  [ 2243.391284]  [] tcp_rcv_established+0x194/0x740
  [ 2243.391289]  [] tcp_v6_do_rcv+0x216/0x450
  [ 2243.391294]  [] ? security_sock_rcv_skb+0x16/0x20
  [ 2243.391298]  [] tcp_v6_rcv+0x796/0x7e0
  [ 2243.391304]  [] ? _rtl_pci_rx_interrupt+0x4af/0x680 
[rtl_pci]
  [ 2243.391309]  [] ip6_input_finish+0x140/0x420
  [ 2243.391313]  [] ip6_input+0x22/0x60
  [ 2243.391317]  [] ? tcp_v6_early_demux+0x58/0x70
  [ 2243.3

[Kernel-packages] [Bug 1420290]

[Jani-nikula]

*** Bug 90381 has been marked as a duplicate of this bug. ***

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1420290

Title:
  WARNING: CPU: 0 PID: 2517 at
  /home/kernel/COD/linux/drivers/gpu/drm/i915/intel_display.c:9713
  intel_check_page_flip+0xe6/0xf0 [i915]()

Status in Linux:
  Incomplete
Status in linux package in Ubuntu:
  Confirmed

Bug description:
  Running Vivid with kernel 3.19 (debs from http://kernel.ubuntu.com
  /~kernel-ppa/mainline/v3.19-vivid/), I get the warning below in dmesg.

  I can't use "ubuntu-bug linux" because I get "It appears you are
  currently running a mainline kernel.  It would be better to report
  this bug upstream at http://bugzilla.kernel.org/ so that the upstream
  kernel developers are aware of the issue.  If you'd still like to file
  a bug against the Ubuntu kernel, please boot with an official Ubuntu
  kernel and re-file.". IMHO that last advice would be a DTO (Defeating
  The Objective), as this message does not appear in the 3.18.

  
  $ uname -a
  Linux superstreamer 3.19.0-031900-generic #201502091451 SMP Mon Feb 9 
14:52:52 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

  
  [ 2243.390997] [ cut here ]
  [ 2243.391046] WARNING: CPU: 0 PID: 2517 at 
/home/kernel/COD/linux/drivers/gpu/drm/i915/intel_display.c:9713 
intel_check_page_flip+0xe6/0xf0 [i915]()
  [ 2243.391049] Kicking stuck page flip: queued at 134027, now 134031
  [ 2243.391051] Modules linked in: hid_generic(E) hp_wmi(E) sparse_keymap(E) 
joydev(E) rfcomm(E) bnep(E) intel_rapl(E) intel_soc_dts_thermal(E) 
intel_powerclamp(E) snd_hda_codec_hdmi(E) coretemp(E) kvm_intel(E) 
snd_hda_codec_realtek(E) kvm(E) snd_hda_codec_generic(E) crct10dif_pclmul(E) 
crc32_pclmul(E) ghash_clmulni_intel(E) cryptd(E) arc4(E) rtl8723be(E) 
btcoexist(E) snd_hda_intel(E) usbhid(E) rtl8723_common(E) snd_hda_controller(E) 
rtl_pci(E) serio_raw(E) rtlwifi(E) snd_hda_codec(E) snd_intel_sst_acpi(E) 
nls_iso8859_1(E) snd_hwdep(E) snd_intel_sst_core(E) 
snd_soc_sst_mfld_platform(E) mac80211(E) rtsx_pci_ms(E) snd_seq_midi(E) 
memstick(E) snd_soc_rt5640(E) snd_soc_rl6231(E) snd_seq_midi_event(E) 
cfg80211(E) lpc_ich(E) i915(E) snd_soc_core(E) snd_rawmidi(E) snd_compress(E) 
wmi(E) hp_wireless(E) snd_pcm_dmaengine(E)
  [ 2243.391089]  snd_seq(E) dw_dmac(E) dw_dmac_core(E) int3400_thermal(E) 
snd_seq_device(E) snd_pcm(E) int3403_thermal(E) processor_thermal_device(E) 
acpi_thermal_rel(E) intel_smartconnect(E) video(E) drm_kms_helper(E) drm(E) 
i2c_hid(E) snd_timer(E) hid(E) snd(E) i2c_designware_platform(E) soundcore(E) 
i2c_designware_core(E) i2c_algo_bit(E) shpchp(E) parport_pc(E) 
snd_soc_sst_acpi(E) btusb(E) mei_txe(E) mei(E) rfkill_gpio(E) iosf_mbi(E) 
ppdev(E) spi_pxa2xx_platform(E) bluetooth(E) 8250_dw(E) pwm_lpss_platform(E) 
pwm_lpss(E) lp(E) parport(E) mac_hid(E) mmc_block(E) rtsx_pci_sdmmc(E) 
psmouse(E) rtsx_pci(E) sdhci_acpi(E) sdhci(E)
  [ 2243.391129] CPU: 0 PID: 2517 Comm: Chrome_IOThread Tainted: GE 
 3.19.0-031900-generic #201502091451
  [ 2243.391131] Hardware name: Hewlett-Packard HP Stream Notebook PC 13/802A, 
BIOS F.05 11/28/2014
  [ 2243.391134]  25f1 880076c03630 817c4c00 
0007
  [ 2243.391138]  880076c03680 880076c03670 81076e87 
0748a8c1
  [ 2243.391142]  880036b91000 8800700909a8 880070090800 

  [ 2243.391146] Call Trace:
  [ 2243.391149][] dump_stack+0x45/0x57
  [ 2243.391162]  [] warn_slowpath_common+0x97/0xe0
  [ 2243.391166]  [] warn_slowpath_fmt+0x46/0x50
  [ 2243.391192]  [] intel_check_page_flip+0xe6/0xf0 [i915]
  [ 2243.391214]  [] 
valleyview_pipestat_irq_handler+0x188/0x220 [i915]
  [ 2243.391236]  [] valleyview_irq_handler+0xaf/0x180 [i915]
  [ 2243.391242]  [] ? ip6_finish_output+0x95/0xd0
  [ 2243.391247]  [] handle_irq_event_percpu+0x5d/0x1e0
  [ 2243.391251]  [] ? ip6_xmit+0x22a/0x490
  [ 2243.391255]  [] handle_irq_event+0x48/0x70
  [ 2243.391258]  [] handle_edge_irq+0x7f/0x120
  [ 2243.391263]  [] handle_irq+0x22/0x40
  [ 2243.391267]  [] do_IRQ+0x5c/0x110
  [ 2243.391271]  [] common_interrupt+0x6d/0x6d
  [ 2243.391276]  [] ? tcp_queue_rcv+0x21/0x130
  [ 2243.391280]  [] ? __skb_checksum_complete+0x22/0xd0
  [ 2243.391284]  [] tcp_rcv_established+0x194/0x740
  [ 2243.391289]  [] tcp_v6_do_rcv+0x216/0x450
  [ 2243.391294]  [] ? security_sock_rcv_skb+0x16/0x20
  [ 2243.391298]  [] tcp_v6_rcv+0x796/0x7e0
  [ 2243.391304]  [] ? _rtl_pci_rx_interrupt+0x4af/0x680 
[rtl_pci]
  [ 2243.391309]  [] ip6_input_finish+0x140/0x420
  [ 2243.391313]  [] ip6_input+0x22/0x60
  [ 2243.391317]  [] ? tcp_v6_early_demux+0x58/0x70
  [ 2243.391321]  [] ip6_rcv_finish+0x78/0xb0
  [ 2243.391324]  [] ipv6_rcv+0x2f7/0x4e0
  [ 2243.391329]  [] __netif_receive_skb_core+0x513/0x670
  [ 2243.391332]  [] __netif_receive_skb+0x21/0x70
  [ 2243.391336]  [] netif_receive_skb_internal+0x23/0x

[Kernel-packages] [Bug 1458631] Re: udev: /dev/input/js0 is created but no joystick attached

[Hans Deragon]

I have this problem on Ubuntu 14.04 LTS Trusty Thar.  Despite unplugging
my joystick, /dev/input/js0 remains and any other joystick attached
takes /dev/input/js1.

Kernel info:  3.13.0-62-generic #102-Ubuntu SMP Tue Aug 11 14:29:36 UTC
2015 x86_64 x86_64 x86_64 GNU/Linux

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1458631

Title:
  udev: /dev/input/js0 is created but no joystick attached

Status in linux package in Ubuntu:
  Incomplete
Status in systemd package in Ubuntu:
  Invalid

Bug description:
  With ubuntu vivid i see a /dev/input/js0. I do not have a joystick or
  gamepad attached. This invalid input device cause a game in steam
  "Crypt of the necrodancer" to crash during start. The game works fine
  when I delete it.

  This appears to be a ubuntu specific bug as it does not show up on
  fedora 22.

  It goes away if I unplug the mouse/keyboard usb dongle I use. If I
  attach a wired keyboard only it does not show up. I tried adding a
  wired mouse too, but that causes js0 to appear too. The output of
  udevadm changes depending on what mouse I have attached. The following
  output is from using the dongle for my wireless mouse/keyboard (both
  microsoft products)

  $sudo udevadm info /dev/input/js0
  P: 
/devices/pci:00/:00:1a.2/usb5/5-1/5-1:1.2/0003:045E:0745.0003/input/input7/js0
  N: input/js0
  S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v6.0-if02-joystick
  S: input/by-path/pci-:00:1a.2-usb-0:1:1.2-joystick
  E: 
DEVLINKS=/dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v6.0-if02-joystick
 /dev/input/by-path/pci-:00:1a.2-usb-0:1:1.2-joystick
  E: DEVNAME=/dev/input/js0
  E: 
DEVPATH=/devices/pci:00/:00:1a.2/usb5/5-1/5-1:1.2/0003:045E:0745.0003/input/input7/js0
  E: ID_BUS=usb
  E: ID_FOR_SEAT=input-pci-_00_1a_2-usb-0_1_1_2
  E: ID_INPUT=1
  E: ID_INPUT_JOYSTICK=1
  E: ID_INPUT_KEY=1
  E: ID_INPUT_KEYBOARD=1
  E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v6.0
  E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v6.0
  E: ID_MODEL_ID=0745
  E: ID_PATH=pci-:00:1a.2-usb-0:1:1.2
  E: ID_PATH_TAG=pci-_00_1a_2-usb-0_1_1_2
  E: ID_REVISION=0251
  E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v6.0
  E: ID_TYPE=hid
  E: ID_USB_DRIVER=usbhid
  E: ID_USB_INTERFACES=:030101:030102:03:
  E: ID_USB_INTERFACE_NUM=02
  E: ID_VENDOR=Microsoft
  E: ID_VENDOR_ENC=Microsoft
  E: ID_VENDOR_ID=045e
  E: MAJOR=13
  E: MINOR=0
  E: SUBSYSTEM=input
  E: TAGS=:seat:uaccess:
  E: USEC_INITIALIZED=117298
  --- 
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  phomes 1442 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 15.04
  HibernationDevice: RESUME=UUID=fde58bd6-316d-4a14-bc85-41d8f26cec02
  InstallationDate: Installed on 2015-03-13 (91 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20150306)
  MachineType: Hewlett-Packard HP Z400 Workstation
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcFB:
   
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-20-generic 
root=UUID=0fad5f38-47ef-4b98-b2ac-1ff9fc3244be ro quiet splash
  ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-20-generic N/A
   linux-backports-modules-3.19.0-20-generic  N/A
   linux-firmware 1.143.1
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
  Tags:  vivid
  Uname: Linux 3.19.0-20-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 07/15/2013
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 786G3 v03.57
  dmi.board.asset.tag: CZC94164B9
  dmi.board.name: 0AE4h
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: C
  dmi.chassis.asset.tag: CZC94164B9
  dmi.chassis.type: 6
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr786G3v03.57:bd07/15/2013:svnHewlett-Packard:pnHPZ400Workstation:pvr:rvnHewlett-Packard:rn0AE4h:rvrC:cvnHewlett-Packard:ct6:cvr:
  dmi.product.name: HP Z400 Workstation
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1458631/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1436940] Re: Atheros wifi 168c:0041(QCA6164) is not supported

[Diego]

A few things you could also try:

1. I read that some people reported the power interfering with the card (try 
booting from battery or AC)
2. I read some people saying that putting the computer to sleep and restoring 
makes Atheros work (weird)
3. Some people reported problems with Atheros card and UEFI  installations 
(just FYI, I use legacy BIOS mode because I switched my drive from an older 
laptop that broke)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1436940

Title:
  Atheros wifi 168c:0041(QCA6164) is not supported

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Vivid:
  Confirmed
Status in linux source package in Wily:
  Confirmed

Bug description:
  The atheros wireless device (168c:0041) isn't supported by the
  ath10k_pci kernel driver.

  Found in several laptop models:

  Lenovo Z70
  Lenovo G50-45
  Lenovo G50-80
  Lenovo Edge 15
  Lenovo Yoga 3 11
  Lenovo Flex 3-1470
  Samsung ATIV Book 9 NP930X2K

  ProblemType: BugDistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-9-generic 3.19.0-9.9
  ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1
  Uname: Linux 3.19.0-9-generic x86_64
  ApportVersion: 2.16.2-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nicholas   1695 F pulseaudio
   /dev/snd/controlC1:  nicholas   1695 F pulseaudio
  CurrentDesktop: Unity
  Date: Thu Mar 26 09:47:16 2015
  HibernationDevice: RESUME=UUID=5b068cd8-e60a-49b9-a88e-1581bb6b3dc1
  InstallationDate: Installed on 2015-03-25 (1 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 004: ID 0cf3:e300 Atheros Communications, Inc.
   Bus 001 Device 003: ID 5986:0652 Acer, Inc
   Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card 
Reader Controller
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: LENOVO 80E5
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-9-generic 
root=UUID=e52867c5-0b50-42fb-8288-f30765f926c5 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-9-generic N/A
   linux-backports-modules-3.19.0-9-generic  N/A
   linux-firmware1.143SourcePackage: linux
  UpgradeStatus: Upgraded to vivid on 2015-03-26 (0 days ago)
  dmi.bios.date: 06/20/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: B0CN69WW
  dmi.board.asset.tag: NO Asset Tag
  dmi.board.name: Lenovo G50-80
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058 WIN
  dmi.chassis.asset.tag: NO Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo G50-80
  dmi.modalias: 
dmi:bvnLENOVO:bvrB0CN69WW:bd06/20/2014:svnLENOVO:pn80E5:pvrLenovoG50-80:rvnLENOVO:rnLenovoG50-80:rvr31900058WIN:cvnLENOVO:ct10:cvrLenovoG50-80:
  dmi.product.name: 80E5
  dmi.product.version: Lenovo G50-80
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1436940/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1475497] Comment bridged from LTC Bugzilla

[bugproxy]

--- Comment From ss...@in.ibm.com 2015-08-23 13:27 EDT---
This problem is fixed with makedumpfile version 1:1.5.8-4

# kdump-config show
DUMP_MODE:fadump
USE_KDUMP:1
KDUMP_SYSCTL: kernel.panic_on_oops=1
KDUMP_COREDIR:/var/crash
current state:ready to fadump
# cat /sys/kernel/fadump_enabled
1
# cat /sys/kernel/fadump_registered
1
# uname -a
Linux alp10 4.2.0-4-generic #4-Ubuntu SMP Tue Aug 11 12:15:53 UTC 2015 ppc64le 
ppc64le ppc64le GNU/Linux
# cat /etc/issue
Ubuntu Wily Werewolf (development branch) \n \l

# dpkg -l | grep makedumpfile
ii  makedumpfile1:1.5.8-4   ppc64el 
 VMcore extraction tool
#

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1475497

Title:
  Unable to configure Firmware Assisted dump

Status in linux package in Ubuntu:
  Invalid
Status in makedumpfile package in Ubuntu:
  In Progress

Bug description:
  ---Steps to Reproduce---
  1) Using latest daily ISO install ubuntu15.10 as a Power VM guest. 
  2) Upgrade the kernel to 4 level (4.0.0-4-generic)
  3) In order to use Firmware Assisted Dump feature update the kernel command 
with fadump=on.
  4) Reboot.

  Post reboot using kdump-config load command fails with following
  message :

  # kdump-config load
  Memory for crashkernel is not reserved
  Please reserve memory by passing"crashkernel=X@Y" parameter to kernel
  Then try to loading kdump kernel
   * failed to load kdump kernel

  
  # kdump-config status
  current state   : Not ready to kdump

  #cat /proc/cmdline
  BOOT_IMAGE=/boot/vmlinux-4.0.0-4-generic 
root=UUID=6298dfdc-e683-473d-a8bc-b3249731b356 ro splash quiet fadump=on 
fadump_reserve_mem=512M crashkernel=512M

  #cat /sys/kernel/fadump_enabled
  1

  #cat /sys/kernel/fadump_registered 
  0

  # dmesg | grep -i Firmware
  [0.00] Reserved 512MB of memory at 3583MB for firmware-assisted dump
  [0.00] firmware_features = 0x0001c45ffc5f


  #cat /boot/config-4.0.0-4-generic | grep -i FA_DUMP
  CONFIG_FA_DUMP=y
   

  
  I think userspace tool is missing for fadump as kdump config file not aware 
about fadump

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1475497/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1484497] Re: [Wily] wakes up green drives without a valid reason

[Ralf Mardorf]

To rule out the kernel being the culprit, I build a kernel I'm using with Arch 
Linux, were green drives stay asleep. IMO it's not caused by the package linux.
There are no differences for the config, that are relevant for the issue.
It's unlikely that there were any additional patches used for the Arch Linux 
kernel, that are related to the issue.


The spin down/spin up test:

[root@moonstudio weremouse]# t=10800;y=$(smartctl -A /dev/sdc|grep
Lo|awk '{print $NF}');sleep $t;x=$(smartctl -A /dev/sdc|grep Lo|awk
'{print $NF}');printf "\n$(uname -rm)$(lsb_release -d|cut -f2 -d:|cut
-f1 -d"(")\n$x-$y=$((x-y)) spins in $(($t/60/60)) hours\n"

3.10.61-rt65-1-moonstudio x86_64Ubuntu Wily Werewolf 
15342-15333=9 spins in 3 hours

Arch Linux only makes one spin, when smartctl wakes up the drive after 3
hours.


That's how I build the Ubuntu kernel:

[root@moonstudio src]# export CONCURRENCY_LEVEL=2;wget
https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.10.61.tar.gz
https://www.kernel.org/pub/linux/kernel/projects/rt/3.10/older/patch-3.10.61-rt65.patch.gz
&& tar zxf linux-3.10.61.tar.gz
&& mv linux-3.10.61 linux-3.10.61-rt65
&& cd linux-3.10.61-rt65 && gzip -dc ../patch-3.10.61-rt65.patch.gz | patch -p1
&& cp ../config-3.10.61-rt65-1-rt-lts.01.edit .config
&& make oldconfig && make menuconfig && make oldconfig
&& date
&& make-kpkg clean && make-kpkg --initrd kernel-image kernel-headers && 
make-kpkg clean
&& date


Most likely the Arch kernel just had two additional patches:

change-default-console-loglevel.patch
fix-race-in-PRT-wait-for-completion-simple-wait-code_Nvidia-RT.patch


Both kernels are configured with CONFIG_X86_64=y and CONFIG_X86=y.
That's the diff of the Arch and Ubuntu config:

$ diff config-3.10.61-rt65-1-rt-lts_x86_64.Arch_Linux_original 
/boot/config-3.10.61-rt65-1-moonstudio
3c3
< # Linux/x86 3.10.61 Kernel Configuration
---
> # Linux/x86_64 3.10.61 Kernel Configuration
52c52
< CONFIG_LOCALVERSION="-1-rt-lts"
---
> CONFIG_LOCALVERSION="-1-moonstudio"
162c162
< CONFIG_CHECKPOINT_RESTORE=y
---
> # CONFIG_CHECKPOINT_RESTORE is not set
321d320
< CONFIG_ASN1=m
1734c1733
< CONFIG_SCSI_ADVANSYS=m
---
> # CONFIG_SCSI_ADVANSYS is not set
1738,1740c1737,1739
< CONFIG_MEGARAID_MAILBOX=m
< CONFIG_MEGARAID_LEGACY=m
< CONFIG_MEGARAID_SAS=m
---
> # CONFIG_MEGARAID_MAILBOX is not set
> # CONFIG_MEGARAID_LEGACY is not set
> # CONFIG_MEGARAID_SAS is not set
2179c2178
< CONFIG_PCH_GBE=m
---
> # CONFIG_PCH_GBE is not set
4116,4117c4115
< CONFIG_DRM_I915=m
< CONFIG_DRM_I915_KMS=y
---
> # CONFIG_DRM_I915 is not set
5186c5184
< CONFIG_R8187SE=m
---
> # CONFIG_R8187SE is not set
5192,5193c5190,5191
< CONFIG_RTL8192E=m
< CONFIG_R8712U=m
---
> # CONFIG_RTL8192E is not set
> # CONFIG_R8712U is not set
5207,5208c5205,5206
< CONFIG_WLAGS49_H2=m
< CONFIG_WLAGS49_H25=m
---
> # CONFIG_WLAGS49_H2 is not set
> # CONFIG_WLAGS49_H25 is not set
6040,6042c6038
< CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
< CONFIG_PUBLIC_KEY_ALGO_RSA=m
< CONFIG_X509_CERTIFICATE_PARSER=m
---
> # CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
6125d6120
< CONFIG_CLZ_TAB=y
6128d6122
< CONFIG_MPILIB=m

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1484497

Title:
  [Wily] wakes up green drives without a valid reason

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  Hi,

  a minimalist Wily server install, around 4.5 GiB small does cause
  endless spin downs and spin ups, so that green drives get damaged. I
  maintain an around 37.5 GiB large Arch Linux install, quasi using the
  same software used by the Wily install and in addition a little bit
  more software, which isn't used by the Wily install. For Arch Linux I
  don't experience this issue. I expect the same for an Ubuntu install.

  I'm already hunting the culprit, see
  https://lists.ubuntu.com/archives/ubuntu-studio-devel/2015-August/006570.html 
and
  https://lists.ubuntu.com/archives/ubuntu-studio-devel/2015-August/006571.html,
  but run out of ideas.

  The claim the install is 2 GiB small is a typo, the backup archive is
  of that size.

  However, assumed Ubuntu won't contribute to
  http://andrewmcconnell.photoshelter.com/gallery/GoLuiBLHIsmM this
  "feature" should be removed from the defaults.

  $ lsb_release -rd
  Description:  Ubuntu Wily Werewolf (development branch)
  Release:  15.10

  Regards,
  Ralf

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1484497/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1457587] Re: wifi crash on wakeup (iwl3945 cfg80211)

[robochat]

I've also been seeing this bug in kubuntu for about the last 6 months. The wifi 
actually works when I come directly out of sleep mode but if the computer 
screen is allowed to lock then afterwards the wifi is broken and journalctl 
shows errors of the kind
"wlan0: Failed check-sdata-in-driver check, flags: 0x4". I've tried to restart 
services and modprobe the iwl3945 module but this often crashes the computer. 
Instead I've found that sending the computer into 'sleep' mode and waking it up 
will restore the wifi -at least for a while.

$ uname -a
...   3.19.0-26-generic #28-Ubuntu SMP Tue Aug 11 14:16:45 UTC 2015 i686 
i686 i686 GNU/Linux

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1457587

Title:
  wifi crash on wakeup (iwl3945 cfg80211)

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  [124243.445408] [ cut here ]
  [124243.445437] WARNING: CPU: 0 PID: 24983 at 
/build/buildd/linux-3.19.0/net/mac80211/driver-ops.h:12 
ieee80211_do_stop+0x8e7/0x8f0 [mac80211]()
  [124243.445439] wlan0:  Failed check-sdata-in-driver check, flags: 0x4
  [124243.445441] Modules linked in: ctr ccm uvcvideo videobuf2_vmalloc 
videobuf2_memops videobuf2_core v4l2_common videodev media coretemp kvm_intel 
kvm amdkfd amd_iommu_v2 arc4 snd_hda_codec_conexant snd_hda_codec_generic 
joydev snd_hda_codec_hdmi serio_raw radeon snd_hda_intel snd_hda_controller 
snd_hda_codec iwl3945 snd_hwdep iwlegacy ttm snd_pcm drm_kms_helper lpc_ich 
mac80211 snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq drm snd_seq_device 
cfg80211 snd_timer snd toshiba_acpi i2c_algo_bit soundcore shpchp sparse_keymap 
wmi toshiba_bluetooth mac_hid video parport_pc ppdev lp parport autofs4 psmouse 
firewire_ohci firewire_core sdhci_pci crc_itu_t sdhci pata_acpi sky2
  [124243.445485] CPU: 0 PID: 24983 Comm: kworker/0:0 Tainted: GW  
3.19.0-17-generic #17-Ubuntu
  [124243.445487] Hardware name: TOSHIBA Satellite P300/Satellite P300, BIOS 
V4.2001/05/2009
  [124243.445498] Workqueue: events ieee80211_restart_work [mac80211]
  [124243.445500]  c0627768 8800805a3b48 817c27cd 
0007
  [124243.445503]  8800805a3b98 8800805a3b88 8107593a 
88013abb93a0
  [124243.445506]  8801395688c0 8800b8ee0680 8800b8ee1530 
8800b8ee1548
  [124243.445509] Call Trace:
  [124243.445516]  [] dump_stack+0x45/0x57
  [124243.445520]  [] warn_slowpath_common+0x8a/0xc0
  [124243.445523]  [] warn_slowpath_fmt+0x46/0x50
  [124243.445537]  [] ieee80211_do_stop+0x8e7/0x8f0 [mac80211]
  [124243.445542]  [] ? dev_deactivate_many+0x213/0x260
  [124243.445650]  [] ieee80211_stop+0x1a/0x20 [mac80211]
  [124243.445654]  [] __dev_close_many+0x95/0xf0
  [124243.445657]  [] dev_close_many+0x81/0x120
  [124243.445660]  [] dev_close.part.68+0x36/0x50
  [124243.445663]  [] dev_close+0x21/0x30
  [124243.445681]  [] 
cfg80211_shutdown_all_interfaces+0x4d/0xc0 [cfg80211]
  [124243.445699]  [] ieee80211_reconfig+0x325/0x1620 
[mac80211]
  [124243.445709]  [] ieee80211_restart_work+0x42/0x80 
[mac80211]
  [124243.445713]  [] process_one_work+0x158/0x430
  [124243.445716]  [] worker_thread+0x5b/0x530
  [124243.445719]  [] ? rescuer_thread+0x3a0/0x3a0
  [124243.445723]  [] kthread+0xc9/0xe0
  [124243.445726]  [] ? kthread_create_on_node+0x1c0/0x1c0
  [124243.445730]  [] ret_from_fork+0x58/0x90
  [124243.445733]  [] ? kthread_create_on_node+0x1c0/0x1c0
  [124243.445735] ---[ end trace a62a134da66aa279 ]---
  [124243.448086] cfg80211: Calling CRDA to update world regulatory domain
  [124243.556433] cfg80211: World regulatory domain updated:
  [124243.556437] cfg80211:  DFS Master region: unset
  [124243.556439] cfg80211:   (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp), (dfs_cac_time)
  [124243.556443] cfg80211:   (2402000 KHz - 2472000 KHz @ 4 KHz), (300 
mBi, 2000 mBm), (N/A)
  [124243.556446] cfg80211:   (2457000 KHz - 2482000 KHz @ 4 KHz), (300 
mBi, 2000 mBm), (N/A)
  [124243.556448] cfg80211:   (2474000 KHz - 2494000 KHz @ 2 KHz), (300 
mBi, 2000 mBm), (N/A)
  [124243.556451] cfg80211:   (517 KHz - 525 KHz @ 4 KHz), (300 
mBi, 2000 mBm), (N/A)
  [124243.556453] cfg80211:   (5735000 KHz - 5835000 KHz @ 4 KHz), (300 
mBi, 2000 mBm), (N/A)
  [133493.814221] iwl3945 :02:00.0: BSM uCode verification failed at addr 
0x3800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
  [133493.814227] iwl3945 :02:00.0: Unable to set up bootstrap uCode: -5
  [133493.860919] iwl3945 :02:00.0: BSM uCode verification failed at addr 
0x3800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
  [133493.860921] iwl3945 :02:00.0: Unable to set up bootstrap uCode: -5
  [133493.907609] iwl3945 :02:00.0: BSM uCode verification failed at addr 
0x3800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020
  [133493.907612] iwl3945 :02:00.0: Unable to

[Kernel-packages] [Bug 1408963] Re: [Xbuntu 14.04, 14.10 and 15.04] Network manager stops working: iwl3945 0000:03:00.0: BSM uCode verification failed at addr ...; wlan0: deauthenticating from... by l

[robochat]

Same problem on acer 5630 running  "3.19.0-26-generic #28-Ubuntu SMP Tue
Aug 11 14:16:45 UTC 2015 i686 i686 i686 GNU/Linux"

This has been a problem for about 6 months. I currently am able to
(temporarily) fix it by sending the computer into sleep mode and then
waking it up again but would be great to get a proper fix!

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-firmware in Ubuntu.
https://bugs.launchpad.net/bugs/1408963

Title:
  [Xbuntu 14.04, 14.10 and 15.04] Network manager stops working: iwl3945
  :03:00.0: BSM uCode verification failed at addr ...; wlan0:
  deauthenticating from... by local choice (Reason: 3=DEAUTH_LEAVING),

Status in linux-firmware package in Ubuntu:
  Confirmed
Status in network-manager package in Ubuntu:
  Confirmed

Bug description:
  From time to time, the system loses all wireles networks and kubuntu
  network manager applet goes blank - not even one network is shown. All
  wifi connections are broken. Rebooting fixes the issue, switching to
  WICD on-the-fly enables to continue browsing without rebooting, so it
  seems to be no hardware issue or iwl3945 issue.

  What to expect: stable connections and flawless network managing.
  What happens: so above.

  Further informations about the system, the network configuration, the
  package version can be found in the attachment, also parts of rsyslog
  and dmesg.

  Interesting, according to some helpers, are the following lines:
  dmesg:   wlan0: deauthenticating from 02:26:4d:ac:8f:45 by local choice 
(Reason: 3=DEAUTH_LEAVING)

  lsb_release -a
  No LSB modules are available.
  Distributor ID: Ubuntu
  Description:Ubuntu 14.10
  Release:14.10
  Codename:   utopic

  apt-cache policy network-manager
  network-manager:
    Installiert:   0.9.8.8-0ubuntu28
    Installationskandidat: 0.9.8.8-0ubuntu28
    Versionstabelle:
   *** 0.9.8.8-0ubuntu28 0
  500 http://de.archive.ubuntu.com/ubuntu/ utopic/main amd64 Packages
  100 /var/lib/dpkg/status

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1408963/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1487700] Re: bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4: bcmwl kernel module failed to build

[Alberto Salvia Novella]

** Changed in: bcmwl (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1487700

Title:
  bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4: bcmwl kernel module
  failed to build

Status in bcmwl package in Ubuntu:
  Confirmed

Bug description:
  bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4: bcmwl kernel module
  failed to build

  ProblemType: Package
  DistroRelease: Ubuntu 15.10
  Package: bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4
  Uname: Linux 4.1.6-040106-generic i686
  NonfreeKernelModules: wl
  ApportVersion: 2.18-0ubuntu7
  Architecture: i386
  DKMSKernelVersion: 4.2.0-040200rc7-generic
  Date: Sat Aug 22 14:50:12 2015
  InstallationDate: Installed on 2015-06-02 (81 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Alpha i386 (20150601)
  PackageVersion: 6.30.223.248+bdcom-0ubuntu4
  RelatedPackageVersions:
   dpkg 1.18.2ubuntu1
   apt  1.0.9.10ubuntu6
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1487700/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1487662] Re: cciss driver crashes kernel during boot with wily kernel

[Alberto Salvia Novella]

** Changed in: linux (Ubuntu)
   Importance: Undecided => Critical

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1487662

Title:
  cciss driver crashes kernel during boot with wily kernel

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  On a HP Proliant was running trusty with vivid kernel from backports
  originally. Worked fine with userspace upgrade to wily. When I
  rebooted with the wily linux-generic kernel however I got a stack
  dump:

  SW Raid1 on two CCISS based RAID0 disks, and dm_crypt. Kernel boots to
  prompt for cyrptoroot passphrase. After entering it and mounting
  entering the dm mapper init sequence the kernel crashes. I have a
  dropbear instance installed running from initramfs (for remote
  unlocking of root) and this is still runs.

  dmesg attached from server.
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Aug 22 00:52 seq
   crw-rw 1 root audio 116, 33 Aug 22 00:52 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.18-0ubuntu7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  DistroRelease: Ubuntu 15.10
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=/dev/mapper/vg0-swap
  MachineType: HP ProLiant BL460c G1
  Package: linux (not installed)
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-26-generic 
root=/dev/mapper/vg0-root ro quiet nomdmonddf nomdmonisw
  ProcVersionSignature: Ubuntu 3.19.0-26.28~14.04.1-generic 3.19.8-ckt4
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-26-generic N/A
   linux-backports-modules-3.19.0-26-generic  N/A
   linux-firmware 1.146
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  wily uec-images
  Uname: Linux 3.19.0-26-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 05/02/2011
  dmi.bios.vendor: HP
  dmi.bios.version: I15
  dmi.chassis.type: 23
  dmi.chassis.vendor: HP
  dmi.modalias: 
dmi:bvnHP:bvrI15:bd05/02/2011:svnHP:pnProLiantBL460cG1:pvr:cvnHP:ct23:cvr:
  dmi.product.name: ProLiant BL460c G1
  dmi.sys.vendor: HP

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1487662/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1487587] Re: iwlwifi 0000:01:00.0: Microcode SW error detected. Restarting 0x82000000.

[Alberto Salvia Novella]

@ Cristian Aravena Romero

When does this bug happen?

When answered please set this bug status back to "confirmed". Thank you.

** Changed in: linux (Ubuntu)
   Status: Confirmed => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1487587

Title:
  iwlwifi :01:00.0: Microcode SW error detected.  Restarting
  0x8200.

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  dmesg:
  [  832.175282] iwlwifi :01:00.0: Microcode SW error detected.  Restarting 
0x8200.
  [  832.175297] iwlwifi :01:00.0: CSR values:
  [  832.175305] iwlwifi :01:00.0: (2nd byte of CSR_INT_COALESCING is 
CSR_INT_PERIODIC_REG)
  [  832.175317] iwlwifi :01:00.0:CSR_HW_IF_CONFIG_REG: 0X00484b00
  [  832.175329] iwlwifi :01:00.0:  CSR_INT_COALESCING: 0Xff40
  [  832.175339] iwlwifi :01:00.0: CSR_INT: 0X
  [  832.175350] iwlwifi :01:00.0:CSR_INT_MASK: 0X
  [  832.175430] iwlwifi :01:00.0:   CSR_FH_INT_STATUS: 0X
  [  832.175449] iwlwifi :01:00.0: CSR_GPIO_IN: 0X003c
  [  832.175460] iwlwifi :01:00.0:   CSR_RESET: 0X
  [  832.175470] iwlwifi :01:00.0:CSR_GP_CNTRL: 0X080403c5
  [  832.175481] iwlwifi :01:00.0:  CSR_HW_REV: 0X00b0
  [  832.175492] iwlwifi :01:00.0:  CSR_EEPROM_REG: 0Xcc540ffd
  [  832.175502] iwlwifi :01:00.0:   CSR_EEPROM_GP: 0X9801
  [  832.175513] iwlwifi :01:00.0:  CSR_OTP_GP_REG: 0X00030001
  [  832.175525] iwlwifi :01:00.0: CSR_GIO_REG: 0X00080044
  [  832.175535] iwlwifi :01:00.0:CSR_GP_UCODE_REG: 0Xae40
  [  832.175546] iwlwifi :01:00.0:   CSR_GP_DRIVER_REG: 0X
  [  832.175556] iwlwifi :01:00.0:   CSR_UCODE_DRV_GP1: 0X
  [  832.175568] iwlwifi :01:00.0:   CSR_UCODE_DRV_GP2: 0X
  [  832.175588] iwlwifi :01:00.0: CSR_LED_REG: 0X0040
  [  832.175612] iwlwifi :01:00.0:CSR_DRAM_INT_TBL_REG: 0X880cdaf5
  [  832.175632] iwlwifi :01:00.0:CSR_GIO_CHICKEN_BITS: 0X27800200
  [  832.175644] iwlwifi :01:00.0: CSR_ANA_PLL_CFG: 0X
  [  832.175655] iwlwifi :01:00.0:  CSR_MONITOR_STATUS_REG: 0X43f7ffd7
  [  832.175666] iwlwifi :01:00.0:   CSR_HW_REV_WA_REG: 0X0001001a
  [  832.175677] iwlwifi :01:00.0:CSR_DBG_HPET_MEM_REG: 0X
  [  832.175685] iwlwifi :01:00.0: FH register values:
  [  832.175706] iwlwifi :01:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 
0X0bcbc000
  [  832.175728] iwlwifi :01:00.0:FH_RSCSR_CHNL0_RBDCB_BASE_REG: 
0X00c3a160
  [  832.175761] iwlwifi :01:00.0:  FH_RSCSR_CHNL0_WPTR: 
0X0030
  [  832.175784] iwlwifi :01:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 
0X80801114
  [  832.175806] iwlwifi :01:00.0:  FH_MEM_RSSR_SHARED_CTRL_REG: 
0X00fc
  [  832.175827] iwlwifi :01:00.0:FH_MEM_RSSR_RX_STATUS_REG: 
0X0703
  [  832.175849] iwlwifi :01:00.0:FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 
0X
  [  832.175878] iwlwifi :01:00.0:FH_TSSR_TX_STATUS_REG: 
0X07ff0001
  [  832.175899] iwlwifi :01:00.0: FH_TSSR_TX_ERROR_REG: 
0X
  [  832.175909] iwlwifi :01:00.0: Loaded firmware version: 18.168.6.1
  [  832.176042] iwlwifi :01:00.0: Start IWL Error Log Dump:
  [  832.176052] iwlwifi :01:00.0: Status: 0x02CC, count: 6
  [  832.176061] iwlwifi :01:00.0: 0x198A | ADVANCED_SYSASSERT  
  [  832.176069] iwlwifi :01:00.0: 0x00015920 | uPc
  [  832.176076] iwlwifi :01:00.0: 0x00015910 | branchlink1
  [  832.176083] iwlwifi :01:00.0: 0x00015910 | branchlink2
  [  832.176090] iwlwifi :01:00.0: 0xDBEA | interruptlink1
  [  832.176097] iwlwifi :01:00.0: 0x | interruptlink2
  [  832.176103] iwlwifi :01:00.0: 0x025A | data1
  [  832.176110] iwlwifi :01:00.0: 0x0006 | data2
  [  832.176118] iwlwifi :01:00.0: 0x01DC | line
  [  832.176130] iwlwifi :01:00.0: 0x97C14AF3 | beacon time
  [  832.176137] iwlwifi :01:00.0: 0xCD40050D | tsf low
  [  832.176144] iwlwifi :01:00.0: 0x | tsf hi
  [  832.176152] iwlwifi :01:00.0: 0x | time gp1
  [  832.176160] iwlwifi :01:00.0: 0x2FA8720A | time gp2
  [  832.176167] iwlwifi :01:00.0: 0x | time gp3
  [  832.176175] iwlwifi :01:00.0: 0x754312A8 | uCode version
  [  832.176183] iwlwifi :01:00.0: 0x00B0 | hw version
  [  832.176190] iwlwifi :01:00.0: 0x00484B00 | board version
  [  832.176199] iwlwifi :01:00.0: 0x001C | hcmd
  [  832.176207] iwlwifi :01:00.0: 0x27A63040 | isr0
  [  832.176215] iwlw

[Kernel-packages] [Bug 1487769] Re: Task hung when using GPU

[Alberto Salvia Novella]

Team Fortress 2, as many Steam games do, do not use Ubuntu native
libraries. Instead Steam provides its own ones, which usually are older
and do not support the latest Radeon graphics.

If you are experiencing this bug with a game outside Steam, please set
its status back to "confirmed". Thank you.

** Changed in: linux (Ubuntu)
   Status: Confirmed => Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1487769

Title:
  Task hung when using GPU

Status in linux package in Ubuntu:
  Invalid

Bug description:
  When I try to run the game Team Fortress 2 (freely available from
  Steam) with linux-generic kernel and free Radeonsi Gallium driver from
  Mesa, latest version updated from a PPA
  (https://launchpad.net/~oibaf/+archive/ubuntu/graphics-drivers), the
  game hungs at the loading screen, won't die with SIGKILL, and will
  print periodically this message in dmesg:

  [  910.474207] radeon :01:00.0: bo 88006da3bc00 va 0x0323bc 
conflict with (bo 8800647f 0x0323bc 0x0323bc)
  [ 1080.007000] INFO: task hl2_linux:2675 blocked for more than 120 seconds.
  [ 1080.007003]   Tainted: G   OE  3.19.0-25-generic #26-Ubuntu
  [ 1080.007004] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables 
this message.
  [ 1080.007004] hl2_linux   D 8801987cfcb8 0  2675   2672 
0x2002
  [ 1080.007007]  8801987cfcb8 88019930ce80 00014240 
8801987cffd8
  [ 1080.007008]  00014240 8801a82993a0 88019930ce80 
00200046
  [ 1080.007009]  88006da3bdf0 88006da3bdf4 88019930ce80 

  [ 1080.007011] Call Trace:
  [ 1080.007017]  [] schedule_preempt_disabled+0x29/0x70
  [ 1080.007019]  [] __mutex_lock_slowpath+0x95/0x100
  [ 1080.007020]  [] mutex_lock+0x23/0x40
  [ 1080.007035]  [] radeon_gem_object_close+0x70/0x120 
[radeon]
  [ 1080.007042]  [] drm_gem_handle_delete+0xac/0x100 [drm]
  [ 1080.007044]  [] ? __sb_end_write+0x35/0x70
  [ 1080.007048]  [] drm_gem_close_ioctl+0x25/0x30 [drm]
  [ 1080.007052]  [] drm_ioctl+0x1df/0x680 [drm]
  [ 1080.007054]  [] ? fsnotify+0x37e/0x530
  [ 1080.007062]  [] drm_compat_ioctl+0x35/0x40 [drm]
  [ 1080.007071]  [] radeon_kms_compat_ioctl+0x25/0x30 
[radeon]
  [ 1080.007073]  [] compat_SyS_ioctl+0xc0/0x320
  [ 1080.007075]  [] sysenter_dispatch+0x7/0x21

  Installing linux-lowlatency solved the problem. My GPU is reported
  from mesa as being a AMD TAHITI.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-generic 3.19.0.26.25
  ProcVersionSignature: Ubuntu 3.19.0-26.28-lowlatency 3.19.8-ckt4
  Uname: Linux 3.19.0-26-lowlatency x86_64
  ApportVersion: 2.17.2-0ubuntu1.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC3:  lucas  3705 F pulseaudio
   /dev/snd/controlC2:  lucas  3705 F pulseaudio
   /dev/snd/controlC1:  lucas  3705 F pulseaudio
   /dev/snd/controlC0:  lucas  3705 F pulseaudio
  CurrentDesktop: XFCE
  Date: Sat Aug 22 17:22:25 2015
  HibernationDevice: RESUME=UUID=d49e649c-f1dc-44c4-abd1-357220cf8a95
  InstallationDate: Installed on 2015-07-05 (48 days ago)
  InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  MachineType: Gigabyte Technology Co., Ltd. Z97M-D3H
  ProcFB:
   0 radeondrmfb
   1 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-26-lowlatency 
root=UUID=c0557b65-d473-42d2-96e3-5546f8923821 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-26-lowlatency N/A
   linux-backports-modules-3.19.0-26-lowlatency  N/A
   linux-firmware1.143.3
  RfKill:

  SourcePackage: linux
  UdevLog: Error: [Errno 2] Arquivo ou diretório não encontrado: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/24/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: F2
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: Z97M-D3H
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrF2:bd04/24/2014:svnGigabyteTechnologyCo.,Ltd.:pnZ97M-D3H:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnZ97M-D3H:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: Z97M-D3H
  dmi.product.version: To be filled by O.E.M.
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1487769/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Pos

[Kernel-packages] [Bug 1487662] Re: cciss driver crashes kernel during boot with wily kernel

[Alberto Salvia Novella]

Does this bug happen when using the upper kernel mainline built?


When answered, please set this report status back to "confirmed". Thank
you.

** Tags added: kernel-fs

** Changed in: linux (Ubuntu)
   Status: Confirmed => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1487662

Title:
  cciss driver crashes kernel during boot with wily kernel

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  On a HP Proliant was running trusty with vivid kernel from backports
  originally. Worked fine with userspace upgrade to wily. When I
  rebooted with the wily linux-generic kernel however I got a stack
  dump:

  SW Raid1 on two CCISS based RAID0 disks, and dm_crypt. Kernel boots to
  prompt for cyrptoroot passphrase. After entering it and mounting
  entering the dm mapper init sequence the kernel crashes. I have a
  dropbear instance installed running from initramfs (for remote
  unlocking of root) and this is still runs.

  dmesg attached from server.
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Aug 22 00:52 seq
   crw-rw 1 root audio 116, 33 Aug 22 00:52 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.18-0ubuntu7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  DistroRelease: Ubuntu 15.10
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=/dev/mapper/vg0-swap
  MachineType: HP ProLiant BL460c G1
  Package: linux (not installed)
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-26-generic 
root=/dev/mapper/vg0-root ro quiet nomdmonddf nomdmonisw
  ProcVersionSignature: Ubuntu 3.19.0-26.28~14.04.1-generic 3.19.8-ckt4
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-26-generic N/A
   linux-backports-modules-3.19.0-26-generic  N/A
   linux-firmware 1.146
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  wily uec-images
  Uname: Linux 3.19.0-26-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 05/02/2011
  dmi.bios.vendor: HP
  dmi.bios.version: I15
  dmi.chassis.type: 23
  dmi.chassis.vendor: HP
  dmi.modalias: 
dmi:bvnHP:bvrI15:bd05/02/2011:svnHP:pnProLiantBL460cG1:pvr:cvnHP:ct23:cvr:
  dmi.product.name: ProLiant BL460c G1
  dmi.sys.vendor: HP

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1487662/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1487769] Re: Task hung when using GPU

[Lucas Clemente Vella]

I couldn't disagree more with the closing of this bug, for two reasons:

1) Steam and Steam's games sometimes do replace completely userspace
libraries, like C++ standard library, SDL and/or FreeType, but never
OpenGL or graphic drivers, they always relies on systems installed
implementation for that, and for Steam first run, it asks for sudo
password and installs OpenGL via apt-get automatically.

2) Most importantly, this is a bug were a process hungs in kernelspace
(I can't even kill it with SIGKILL), so no matter what library or
application or any userspace code I could be running, this should never
happen. No custom library Steam could install as my non-privileged user
is able to change code running in kernelspace. This is why this bug was
filled against "linux" package.

** Changed in: linux (Ubuntu)
   Status: Invalid => New

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1487769

Title:
  Task hung when using GPU

Status in linux package in Ubuntu:
  New

Bug description:
  When I try to run the game Team Fortress 2 (freely available from
  Steam) with linux-generic kernel and free Radeonsi Gallium driver from
  Mesa, latest version updated from a PPA
  (https://launchpad.net/~oibaf/+archive/ubuntu/graphics-drivers), the
  game hungs at the loading screen, won't die with SIGKILL, and will
  print periodically this message in dmesg:

  [  910.474207] radeon :01:00.0: bo 88006da3bc00 va 0x0323bc 
conflict with (bo 8800647f 0x0323bc 0x0323bc)
  [ 1080.007000] INFO: task hl2_linux:2675 blocked for more than 120 seconds.
  [ 1080.007003]   Tainted: G   OE  3.19.0-25-generic #26-Ubuntu
  [ 1080.007004] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables 
this message.
  [ 1080.007004] hl2_linux   D 8801987cfcb8 0  2675   2672 
0x2002
  [ 1080.007007]  8801987cfcb8 88019930ce80 00014240 
8801987cffd8
  [ 1080.007008]  00014240 8801a82993a0 88019930ce80 
00200046
  [ 1080.007009]  88006da3bdf0 88006da3bdf4 88019930ce80 

  [ 1080.007011] Call Trace:
  [ 1080.007017]  [] schedule_preempt_disabled+0x29/0x70
  [ 1080.007019]  [] __mutex_lock_slowpath+0x95/0x100
  [ 1080.007020]  [] mutex_lock+0x23/0x40
  [ 1080.007035]  [] radeon_gem_object_close+0x70/0x120 
[radeon]
  [ 1080.007042]  [] drm_gem_handle_delete+0xac/0x100 [drm]
  [ 1080.007044]  [] ? __sb_end_write+0x35/0x70
  [ 1080.007048]  [] drm_gem_close_ioctl+0x25/0x30 [drm]
  [ 1080.007052]  [] drm_ioctl+0x1df/0x680 [drm]
  [ 1080.007054]  [] ? fsnotify+0x37e/0x530
  [ 1080.007062]  [] drm_compat_ioctl+0x35/0x40 [drm]
  [ 1080.007071]  [] radeon_kms_compat_ioctl+0x25/0x30 
[radeon]
  [ 1080.007073]  [] compat_SyS_ioctl+0xc0/0x320
  [ 1080.007075]  [] sysenter_dispatch+0x7/0x21

  Installing linux-lowlatency solved the problem. My GPU is reported
  from mesa as being a AMD TAHITI.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-generic 3.19.0.26.25
  ProcVersionSignature: Ubuntu 3.19.0-26.28-lowlatency 3.19.8-ckt4
  Uname: Linux 3.19.0-26-lowlatency x86_64
  ApportVersion: 2.17.2-0ubuntu1.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC3:  lucas  3705 F pulseaudio
   /dev/snd/controlC2:  lucas  3705 F pulseaudio
   /dev/snd/controlC1:  lucas  3705 F pulseaudio
   /dev/snd/controlC0:  lucas  3705 F pulseaudio
  CurrentDesktop: XFCE
  Date: Sat Aug 22 17:22:25 2015
  HibernationDevice: RESUME=UUID=d49e649c-f1dc-44c4-abd1-357220cf8a95
  InstallationDate: Installed on 2015-07-05 (48 days ago)
  InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  MachineType: Gigabyte Technology Co., Ltd. Z97M-D3H
  ProcFB:
   0 radeondrmfb
   1 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-26-lowlatency 
root=UUID=c0557b65-d473-42d2-96e3-5546f8923821 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-26-lowlatency N/A
   linux-backports-modules-3.19.0-26-lowlatency  N/A
   linux-firmware1.143.3
  RfKill:

  SourcePackage: linux
  UdevLog: Error: [Errno 2] Arquivo ou diretório não encontrado: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/24/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: F2
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: Z97M-D3H
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrF2:bd04/24/201

[Kernel-packages] [Bug 1487890] [NEW] [synaptic] no history

[Ralf Mardorf]

Public bug reported:

Hi,

a while back after an upgrade I lost synaptic's history. I can't
remember when it happened and can't test by downgrading,
/var/log/apt/history.log still is available.

When running the current version with the lost history, there are a few
glib messages.

Currently just Claws, IceCat and a kernel are not from official
repositories. Synaptic history also isn't available when using a kernel
from the repositories. Other non-standard packages I want to use are
rodent and libfm, but currently those packages are purged. IOW nothing
that isn't from official repositories is related to the bug.

Details:

[root@moonstudio archives]# lsb_release -rd;uname -srm
Description:Ubuntu Wily Werewolf (development branch)
Release:15.10
Linux 3.10.61-rt65-1-moonstudio x86_64

[root@moonstudio archives]# dpkg -s synaptic|grep Ve;ls -hog syn*
Version: 0.81.4build1
-rw-r--r-- 1 1.4M Jul 11 19:28 synaptic_0.81.4_amd64.deb
-rw-r--r-- 1 1.3M Aug  6 09:04 synaptic_0.81.4build1_amd64.deb

[root@moonstudio archives]# dpkg -i synaptic_0.81.4_amd64.deb 
[...]

[root@moonstudio archives]# dpkg -s synaptic|grep Ve
Version: 0.81.4
Config-Version: 0.81.4build1

[root@moonstudio archives]# synaptic
synaptic: error while loading shared libraries: libept.so.1.aptpkg4.12: cannot 
open shared object file: No such file or directory

[root@moonstudio archives]# dpkg -i libept1.4.1
libept1.4.12_1.0.12.1_amd64.deb   libept1.4.12_1.0.13_amd64.deb 
libept1.4.16_1.0.13ubuntu1_amd64.deb
[root@moonstudio archives]# dpkg -i libept1.4.12_1.0.13_amd64.deb
[...]

[root@moonstudio archives]# synaptic
synaptic: symbol lookup error: synaptic: undefined symbol: 
_ZN6Xapian8DatabaseC1ERKSs

[root@moonstudio archives]# apt-get purge synaptic && dpkg -i 
synaptic_0.81.4_amd64.deb
[...]

[root@moonstudio archives]# synaptic
synaptic: symbol lookup error: synaptic: undefined symbol: 
_ZN6Xapian8DatabaseC1ERKSs

[root@moonstudio archives]# dpkg -s synaptic|grep Ve
Version: 0.81.4

[root@moonstudio archives]# apt-get update && apt-get upgrade
[...]
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies:
 synaptic : Depends: libxapian22 but it is not installable
E: Unmet dependencies. Try using -f.

[root@moonstudio archives]# apt-get -f install
[...]

[root@moonstudio archives]# dpkg -s synaptic|grep Ve
Version: 0.81.4build1

[root@moonstudio archives]# synaptic

(synaptic:6382): GLib-GObject-WARNING **: The property GtkImage:stock is
deprecated and shouldn't be used anymore. It will be removed in a future
version.

(synaptic:6382): GLib-GObject-WARNING **: The property GtkMisc:yalign is
deprecated and shouldn't be used anymore. It will be removed in a future
version.

(synaptic:6382): GLib-GObject-WARNING **: The property GtkImageMenuItem
:use-stock is deprecated and shouldn't be used anymore. It will be
removed in a future version.

(synaptic:6382): GLib-GObject-WARNING **: The property
GtkImageMenuItem:image is deprecated and shouldn't be used anymore. It
will be removed in a future version.

(synaptic:6382): GLib-GObject-WARNING **: The property GtkSettings:gtk-
menu-images is deprecated and shouldn't be used anymore. It will be
removed in a future version.

(synaptic:6382): GLib-GObject-WARNING **: The property GtkToolButton
:stock-id is deprecated and shouldn't be used anymore. It will be
removed in a future version.

(synaptic:6382): GLib-GObject-WARNING **: The property GtkButton:xalign
is deprecated and shouldn't be used anymore. It will be removed in a
future version.

(synaptic:6382): GLib-GObject-WARNING **: The property GtkAlignment
:right-padding is deprecated and shouldn't be used anymore. It will be
removed in a future version.

(synaptic:6382): GLib-GObject-WARNING **: The property GtkContainer
:resize-mode is deprecated and shouldn't be used anymore. It will be
removed in a future version.

(synaptic:6382): GLib-GObject-WARNING **: The property GtkAlignment
:bottom-padding is deprecated and shouldn't be used anymore. It will be
removed in a future version.

(synaptic:6382): GLib-GObject-WARNING **: The property GtkAlignment
:left-padding is deprecated and shouldn't be used anymore. It will be
removed in a future version.

(synaptic:6382): GLib-GObject-WARNING **: The property
GtkCellRendererText:background-gdk is deprecated and shouldn't be used
anymore. It will be removed in a future version.

(synaptic:6382): GLib-GObject-WARNING **: The property GtkSettings:gtk-
button-images is deprecated and shouldn't be used anymore. It will be
removed in a future version.

(synaptic:6382): GLib-CRITICAL **: g_dir_read_name: assertion 'dir !=
NULL' failed

(synaptic:6382): GLib-CRITICAL **: g_dir_close: assertion 'dir != NULL'
failed

[root@moonstudio archives]# tail -10 /var/log/apt/history.log

Start-Date: 2015-08-23  18:14:25
Commandline: apt-get purge synaptic
Purge: synaptic:amd64 (0.81.4build1)
End-Date: 2015-08-23  18:14:29

Start-Date: 2015-08-23  18:1

[Kernel-packages] [Bug 1487769] Status changed to Confirmed

[Brad Figg]

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1487769

Title:
  Task hung when using GPU

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  When I try to run the game Team Fortress 2 (freely available from
  Steam) with linux-generic kernel and free Radeonsi Gallium driver from
  Mesa, latest version updated from a PPA
  (https://launchpad.net/~oibaf/+archive/ubuntu/graphics-drivers), the
  game hungs at the loading screen, won't die with SIGKILL, and will
  print periodically this message in dmesg:

  [  910.474207] radeon :01:00.0: bo 88006da3bc00 va 0x0323bc 
conflict with (bo 8800647f 0x0323bc 0x0323bc)
  [ 1080.007000] INFO: task hl2_linux:2675 blocked for more than 120 seconds.
  [ 1080.007003]   Tainted: G   OE  3.19.0-25-generic #26-Ubuntu
  [ 1080.007004] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables 
this message.
  [ 1080.007004] hl2_linux   D 8801987cfcb8 0  2675   2672 
0x2002
  [ 1080.007007]  8801987cfcb8 88019930ce80 00014240 
8801987cffd8
  [ 1080.007008]  00014240 8801a82993a0 88019930ce80 
00200046
  [ 1080.007009]  88006da3bdf0 88006da3bdf4 88019930ce80 

  [ 1080.007011] Call Trace:
  [ 1080.007017]  [] schedule_preempt_disabled+0x29/0x70
  [ 1080.007019]  [] __mutex_lock_slowpath+0x95/0x100
  [ 1080.007020]  [] mutex_lock+0x23/0x40
  [ 1080.007035]  [] radeon_gem_object_close+0x70/0x120 
[radeon]
  [ 1080.007042]  [] drm_gem_handle_delete+0xac/0x100 [drm]
  [ 1080.007044]  [] ? __sb_end_write+0x35/0x70
  [ 1080.007048]  [] drm_gem_close_ioctl+0x25/0x30 [drm]
  [ 1080.007052]  [] drm_ioctl+0x1df/0x680 [drm]
  [ 1080.007054]  [] ? fsnotify+0x37e/0x530
  [ 1080.007062]  [] drm_compat_ioctl+0x35/0x40 [drm]
  [ 1080.007071]  [] radeon_kms_compat_ioctl+0x25/0x30 
[radeon]
  [ 1080.007073]  [] compat_SyS_ioctl+0xc0/0x320
  [ 1080.007075]  [] sysenter_dispatch+0x7/0x21

  Installing linux-lowlatency solved the problem. My GPU is reported
  from mesa as being a AMD TAHITI.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-generic 3.19.0.26.25
  ProcVersionSignature: Ubuntu 3.19.0-26.28-lowlatency 3.19.8-ckt4
  Uname: Linux 3.19.0-26-lowlatency x86_64
  ApportVersion: 2.17.2-0ubuntu1.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC3:  lucas  3705 F pulseaudio
   /dev/snd/controlC2:  lucas  3705 F pulseaudio
   /dev/snd/controlC1:  lucas  3705 F pulseaudio
   /dev/snd/controlC0:  lucas  3705 F pulseaudio
  CurrentDesktop: XFCE
  Date: Sat Aug 22 17:22:25 2015
  HibernationDevice: RESUME=UUID=d49e649c-f1dc-44c4-abd1-357220cf8a95
  InstallationDate: Installed on 2015-07-05 (48 days ago)
  InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  MachineType: Gigabyte Technology Co., Ltd. Z97M-D3H
  ProcFB:
   0 radeondrmfb
   1 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-26-lowlatency 
root=UUID=c0557b65-d473-42d2-96e3-5546f8923821 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-26-lowlatency N/A
   linux-backports-modules-3.19.0-26-lowlatency  N/A
   linux-firmware1.143.3
  RfKill:

  SourcePackage: linux
  UdevLog: Error: [Errno 2] Arquivo ou diretório não encontrado: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/24/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: F2
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: Z97M-D3H
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrF2:bd04/24/2014:svnGigabyteTechnologyCo.,Ltd.:pnZ97M-D3H:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnZ97M-D3H:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: Z97M-D3H
  dmi.product.version: To be filled by O.E.M.
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1487769/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1487890] Missing required logs.

[Brad Figg]

This bug is missing log files that will aid in diagnosing the problem.
>From a terminal window please run:

apport-collect 1487890

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.

** Changed in: linux (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1487890

Title:
  [synaptic] no history

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Hi,

  a while back after an upgrade I lost synaptic's history. I can't
  remember when it happened and can't test by downgrading,
  /var/log/apt/history.log still is available.

  When running the current version with the lost history, there are a
  few glib messages.

  Currently just Claws, IceCat and a kernel are not from official
  repositories. Synaptic history also isn't available when using a
  kernel from the repositories. Other non-standard packages I want to
  use are rodent and libfm, but currently those packages are purged. IOW
  nothing that isn't from official repositories is related to the bug.

  Details:

  [root@moonstudio archives]# lsb_release -rd;uname -srm
  Description:  Ubuntu Wily Werewolf (development branch)
  Release:  15.10
  Linux 3.10.61-rt65-1-moonstudio x86_64

  [root@moonstudio archives]# dpkg -s synaptic|grep Ve;ls -hog syn*
  Version: 0.81.4build1
  -rw-r--r-- 1 1.4M Jul 11 19:28 synaptic_0.81.4_amd64.deb
  -rw-r--r-- 1 1.3M Aug  6 09:04 synaptic_0.81.4build1_amd64.deb

  [root@moonstudio archives]# dpkg -i synaptic_0.81.4_amd64.deb 
  [...]

  [root@moonstudio archives]# dpkg -s synaptic|grep Ve
  Version: 0.81.4
  Config-Version: 0.81.4build1

  [root@moonstudio archives]# synaptic
  synaptic: error while loading shared libraries: libept.so.1.aptpkg4.12: 
cannot open shared object file: No such file or directory

  [root@moonstudio archives]# dpkg -i libept1.4.1
  libept1.4.12_1.0.12.1_amd64.deb   libept1.4.12_1.0.13_amd64.deb 
libept1.4.16_1.0.13ubuntu1_amd64.deb
  [root@moonstudio archives]# dpkg -i libept1.4.12_1.0.13_amd64.deb
  [...]

  [root@moonstudio archives]# synaptic
  synaptic: symbol lookup error: synaptic: undefined symbol: 
_ZN6Xapian8DatabaseC1ERKSs

  [root@moonstudio archives]# apt-get purge synaptic && dpkg -i 
synaptic_0.81.4_amd64.deb
  [...]

  [root@moonstudio archives]# synaptic
  synaptic: symbol lookup error: synaptic: undefined symbol: 
_ZN6Xapian8DatabaseC1ERKSs

  [root@moonstudio archives]# dpkg -s synaptic|grep Ve
  Version: 0.81.4

  [root@moonstudio archives]# apt-get update && apt-get upgrade
  [...]
  You might want to run 'apt-get -f install' to correct these.
  The following packages have unmet dependencies:
   synaptic : Depends: libxapian22 but it is not installable
  E: Unmet dependencies. Try using -f.

  [root@moonstudio archives]# apt-get -f install
  [...]

  [root@moonstudio archives]# dpkg -s synaptic|grep Ve
  Version: 0.81.4build1

  [root@moonstudio archives]# synaptic

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkImage:stock
  is deprecated and shouldn't be used anymore. It will be removed in a
  future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkMisc:yalign
  is deprecated and shouldn't be used anymore. It will be removed in a
  future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property
  GtkImageMenuItem:use-stock is deprecated and shouldn't be used
  anymore. It will be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property
  GtkImageMenuItem:image is deprecated and shouldn't be used anymore. It
  will be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkSettings
  :gtk-menu-images is deprecated and shouldn't be used anymore. It will
  be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkToolButton
  :stock-id is deprecated and shouldn't be used anymore. It will be
  removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property
  GtkButton:xalign is deprecated and shouldn't be used anymore. It will
  be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkAlignment
  :right-padding is deprecated and shouldn't be used anymore. It will be
  removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkContainer
  :resize-mode is deprecated and shouldn't be used anymore. It will be
  removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkAlignment
  :bottom-padding is deprecated and shouldn't be used anymore. It will
  be removed in a future version.

[Kernel-packages] [Bug 1487890] Re: [synaptic] no history

[Ralf Mardorf]

apport is purged from my install.
Please mention missing log files and I'll post them.
I didn't attach detailed hardware information, since hardware unlikely does 
cause the bug.

** Changed in: linux (Ubuntu)
   Status: Incomplete => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1487890

Title:
  [synaptic] no history

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  Hi,

  a while back after an upgrade I lost synaptic's history. I can't
  remember when it happened and can't test by downgrading,
  /var/log/apt/history.log still is available.

  When running the current version with the lost history, there are a
  few glib messages.

  Currently just Claws, IceCat and a kernel are not from official
  repositories. Synaptic history also isn't available when using a
  kernel from the repositories. Other non-standard packages I want to
  use are rodent and libfm, but currently those packages are purged. IOW
  nothing that isn't from official repositories is related to the bug.

  Details:

  [root@moonstudio archives]# lsb_release -rd;uname -srm
  Description:  Ubuntu Wily Werewolf (development branch)
  Release:  15.10
  Linux 3.10.61-rt65-1-moonstudio x86_64

  [root@moonstudio archives]# dpkg -s synaptic|grep Ve;ls -hog syn*
  Version: 0.81.4build1
  -rw-r--r-- 1 1.4M Jul 11 19:28 synaptic_0.81.4_amd64.deb
  -rw-r--r-- 1 1.3M Aug  6 09:04 synaptic_0.81.4build1_amd64.deb

  [root@moonstudio archives]# dpkg -i synaptic_0.81.4_amd64.deb 
  [...]

  [root@moonstudio archives]# dpkg -s synaptic|grep Ve
  Version: 0.81.4
  Config-Version: 0.81.4build1

  [root@moonstudio archives]# synaptic
  synaptic: error while loading shared libraries: libept.so.1.aptpkg4.12: 
cannot open shared object file: No such file or directory

  [root@moonstudio archives]# dpkg -i libept1.4.1
  libept1.4.12_1.0.12.1_amd64.deb   libept1.4.12_1.0.13_amd64.deb 
libept1.4.16_1.0.13ubuntu1_amd64.deb
  [root@moonstudio archives]# dpkg -i libept1.4.12_1.0.13_amd64.deb
  [...]

  [root@moonstudio archives]# synaptic
  synaptic: symbol lookup error: synaptic: undefined symbol: 
_ZN6Xapian8DatabaseC1ERKSs

  [root@moonstudio archives]# apt-get purge synaptic && dpkg -i 
synaptic_0.81.4_amd64.deb
  [...]

  [root@moonstudio archives]# synaptic
  synaptic: symbol lookup error: synaptic: undefined symbol: 
_ZN6Xapian8DatabaseC1ERKSs

  [root@moonstudio archives]# dpkg -s synaptic|grep Ve
  Version: 0.81.4

  [root@moonstudio archives]# apt-get update && apt-get upgrade
  [...]
  You might want to run 'apt-get -f install' to correct these.
  The following packages have unmet dependencies:
   synaptic : Depends: libxapian22 but it is not installable
  E: Unmet dependencies. Try using -f.

  [root@moonstudio archives]# apt-get -f install
  [...]

  [root@moonstudio archives]# dpkg -s synaptic|grep Ve
  Version: 0.81.4build1

  [root@moonstudio archives]# synaptic

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkImage:stock
  is deprecated and shouldn't be used anymore. It will be removed in a
  future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkMisc:yalign
  is deprecated and shouldn't be used anymore. It will be removed in a
  future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property
  GtkImageMenuItem:use-stock is deprecated and shouldn't be used
  anymore. It will be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property
  GtkImageMenuItem:image is deprecated and shouldn't be used anymore. It
  will be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkSettings
  :gtk-menu-images is deprecated and shouldn't be used anymore. It will
  be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkToolButton
  :stock-id is deprecated and shouldn't be used anymore. It will be
  removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property
  GtkButton:xalign is deprecated and shouldn't be used anymore. It will
  be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkAlignment
  :right-padding is deprecated and shouldn't be used anymore. It will be
  removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkContainer
  :resize-mode is deprecated and shouldn't be used anymore. It will be
  removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkAlignment
  :bottom-padding is deprecated and shouldn't be used anymore. It will
  be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkAlignment
  :left-padding is deprecated and shouldn't be used anymore. It will be
  removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property
  GtkCellRendererText:background-

[Kernel-packages] [Bug 1487890] Re: [synaptic] no history

[Ralf Mardorf]

** Package changed: linux (Ubuntu) => synaptic (Ubuntu)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1487890

Title:
  [synaptic] no history

Status in synaptic package in Ubuntu:
  Confirmed

Bug description:
  Hi,

  a while back after an upgrade I lost synaptic's history. I can't
  remember when it happened and can't test by downgrading,
  /var/log/apt/history.log still is available.

  When running the current version with the lost history, there are a
  few glib messages.

  Currently just Claws, IceCat and a kernel are not from official
  repositories. Synaptic history also isn't available when using a
  kernel from the repositories. Other non-standard packages I want to
  use are rodent and libfm, but currently those packages are purged. IOW
  nothing that isn't from official repositories is related to the bug.

  Details:

  [root@moonstudio archives]# lsb_release -rd;uname -srm
  Description:  Ubuntu Wily Werewolf (development branch)
  Release:  15.10
  Linux 3.10.61-rt65-1-moonstudio x86_64

  [root@moonstudio archives]# dpkg -s synaptic|grep Ve;ls -hog syn*
  Version: 0.81.4build1
  -rw-r--r-- 1 1.4M Jul 11 19:28 synaptic_0.81.4_amd64.deb
  -rw-r--r-- 1 1.3M Aug  6 09:04 synaptic_0.81.4build1_amd64.deb

  [root@moonstudio archives]# dpkg -i synaptic_0.81.4_amd64.deb 
  [...]

  [root@moonstudio archives]# dpkg -s synaptic|grep Ve
  Version: 0.81.4
  Config-Version: 0.81.4build1

  [root@moonstudio archives]# synaptic
  synaptic: error while loading shared libraries: libept.so.1.aptpkg4.12: 
cannot open shared object file: No such file or directory

  [root@moonstudio archives]# dpkg -i libept1.4.1
  libept1.4.12_1.0.12.1_amd64.deb   libept1.4.12_1.0.13_amd64.deb 
libept1.4.16_1.0.13ubuntu1_amd64.deb
  [root@moonstudio archives]# dpkg -i libept1.4.12_1.0.13_amd64.deb
  [...]

  [root@moonstudio archives]# synaptic
  synaptic: symbol lookup error: synaptic: undefined symbol: 
_ZN6Xapian8DatabaseC1ERKSs

  [root@moonstudio archives]# apt-get purge synaptic && dpkg -i 
synaptic_0.81.4_amd64.deb
  [...]

  [root@moonstudio archives]# synaptic
  synaptic: symbol lookup error: synaptic: undefined symbol: 
_ZN6Xapian8DatabaseC1ERKSs

  [root@moonstudio archives]# dpkg -s synaptic|grep Ve
  Version: 0.81.4

  [root@moonstudio archives]# apt-get update && apt-get upgrade
  [...]
  You might want to run 'apt-get -f install' to correct these.
  The following packages have unmet dependencies:
   synaptic : Depends: libxapian22 but it is not installable
  E: Unmet dependencies. Try using -f.

  [root@moonstudio archives]# apt-get -f install
  [...]

  [root@moonstudio archives]# dpkg -s synaptic|grep Ve
  Version: 0.81.4build1

  [root@moonstudio archives]# synaptic

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkImage:stock
  is deprecated and shouldn't be used anymore. It will be removed in a
  future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkMisc:yalign
  is deprecated and shouldn't be used anymore. It will be removed in a
  future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property
  GtkImageMenuItem:use-stock is deprecated and shouldn't be used
  anymore. It will be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property
  GtkImageMenuItem:image is deprecated and shouldn't be used anymore. It
  will be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkSettings
  :gtk-menu-images is deprecated and shouldn't be used anymore. It will
  be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkToolButton
  :stock-id is deprecated and shouldn't be used anymore. It will be
  removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property
  GtkButton:xalign is deprecated and shouldn't be used anymore. It will
  be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkAlignment
  :right-padding is deprecated and shouldn't be used anymore. It will be
  removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkContainer
  :resize-mode is deprecated and shouldn't be used anymore. It will be
  removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkAlignment
  :bottom-padding is deprecated and shouldn't be used anymore. It will
  be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkAlignment
  :left-padding is deprecated and shouldn't be used anymore. It will be
  removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property
  GtkCellRendererText:background-gdk is deprecated and shouldn't be used
  anymore. It will be removed in a future version.

  (synaptic:6382): GLib-GObject-WARNING **: The property GtkSettings
  :gtk-button-images is depre

[Kernel-packages] [Bug 1436940] Re: Atheros wifi 168c:0041(QCA6164) is not supported

[Ryan]

Hi Diego,

It's finally working! Thank you so much for your help. What seemed to be
the final problem is I was running kernel 4.2 but after downgrading to
your kernel (4.1.0), everything worked.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1436940

Title:
  Atheros wifi 168c:0041(QCA6164) is not supported

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Vivid:
  Confirmed
Status in linux source package in Wily:
  Confirmed

Bug description:
  The atheros wireless device (168c:0041) isn't supported by the
  ath10k_pci kernel driver.

  Found in several laptop models:

  Lenovo Z70
  Lenovo G50-45
  Lenovo G50-80
  Lenovo Edge 15
  Lenovo Yoga 3 11
  Lenovo Flex 3-1470
  Samsung ATIV Book 9 NP930X2K

  ProblemType: BugDistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-9-generic 3.19.0-9.9
  ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1
  Uname: Linux 3.19.0-9-generic x86_64
  ApportVersion: 2.16.2-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nicholas   1695 F pulseaudio
   /dev/snd/controlC1:  nicholas   1695 F pulseaudio
  CurrentDesktop: Unity
  Date: Thu Mar 26 09:47:16 2015
  HibernationDevice: RESUME=UUID=5b068cd8-e60a-49b9-a88e-1581bb6b3dc1
  InstallationDate: Installed on 2015-03-25 (1 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 004: ID 0cf3:e300 Atheros Communications, Inc.
   Bus 001 Device 003: ID 5986:0652 Acer, Inc
   Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card 
Reader Controller
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: LENOVO 80E5
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-9-generic 
root=UUID=e52867c5-0b50-42fb-8288-f30765f926c5 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-9-generic N/A
   linux-backports-modules-3.19.0-9-generic  N/A
   linux-firmware1.143SourcePackage: linux
  UpgradeStatus: Upgraded to vivid on 2015-03-26 (0 days ago)
  dmi.bios.date: 06/20/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: B0CN69WW
  dmi.board.asset.tag: NO Asset Tag
  dmi.board.name: Lenovo G50-80
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058 WIN
  dmi.chassis.asset.tag: NO Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo G50-80
  dmi.modalias: 
dmi:bvnLENOVO:bvrB0CN69WW:bd06/20/2014:svnLENOVO:pn80E5:pvrLenovoG50-80:rvnLENOVO:rnLenovoG50-80:rvr31900058WIN:cvnLENOVO:ct10:cvrLenovoG50-80:
  dmi.product.name: 80E5
  dmi.product.version: Lenovo G50-80
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1436940/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1394869] Re: [HP Stream Notebook - 11-d010nr] Trackpad click does not work

[Jesse Johnson]

I can confirm that this was fixed in kernel 3.19 (Ubuntu 15.04).

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1394869

Title:
  [HP Stream Notebook - 11-d010nr] Trackpad click does not work

Status in linux package in Ubuntu:
  Expired

Bug description:
  I have installed ubuntu 14.10 onto a new HP Stream 11 laptop.  The
  trackpad is a clickpad where the entire trackpad is pushed down to
  simulate a click, there are no other buttons.  It seems that the
  trackpad works fine with the exception that no clicks are registered.

  
  'ubuntu-bug xserver-xorg-input-synaptics' could not be ran as it doesn't seem 
to have an option to hit "send" from the keyboard and the mentioned mouse 
button is not working.

  I followed the information collection from 
https://wiki.ubuntu.com/DebuggingTouchpadDetection and the files will be 
attached to this bug
  --- 
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  bbennett   2193 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.10
  HibernationDevice: RESUME=UUID=64e8a5b2-bd06-4045-9b3f-4fce209a43e2
  InstallationDate: Installed on 2014-11-21 (8 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  MachineType: Hewlett-Packard HP Stream Notebook PC 11
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic.efi.signed 
root=UUID=1a56073a-e119-4e60-b0f6-0e8da343ba22 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-24-generic N/A
   linux-backports-modules-3.16.0-24-generic  N/A
   linux-firmware 1.138
  Tags:  utopic
  Uname: Linux 3.16.0-24-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 09/25/2014
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.02
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 8023
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 54.0D
  dmi.chassis.asset.tag: Chassis Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.02:bd09/25/2014:svnHewlett-Packard:pnHPStreamNotebookPC11:pvrType1-ProductConfigId:rvnHewlett-Packard:rn8023:rvr54.0D:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Stream Notebook PC 11
  dmi.product.version: Type1 - ProductConfigId
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1394869/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1189721] Re: Ralink RT3290 doesn't have a bluetooth driver

[Alexandre Magno]

Yes, my brother got, the mouse.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1189721

Title:
  Ralink RT3290 doesn't have a bluetooth driver

Status in Linux:
  Unknown
Status in Linux Mint:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed

Bug description:
  As of Raring Ubuntu has a wifi driver for the RT3290 that works out of
  the box.

  It still does not have bluetooth support.

  This thread in the Ubuntu forums links to a driver that is claimed to
  work:

  http://ubuntuforums.org/showthread.php?t=2115570
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  graeme 2412 F pulseaudio
  CRDA:
   country GB:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 40), (N/A, 20)
(5250 - 5330 @ 40), (N/A, 20), DFS
(5490 - 5710 @ 40), (N/A, 27), DFS
  DistroRelease: Ubuntu 13.04
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=UUID=2d107179-35e2-4b1f-8bdd-90a01132ec70
  InstallationDate: Installed on 2013-05-17 (144 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
  MachineType: Hewlett-Packard HP ProBook 4540s
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-31-generic 
root=UUID=ac74fd89-3445-4a6d-b91b-ae4987867afe ro quiet splash 
acpi_backlight=vendor vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-31-generic N/A
   linux-backports-modules-3.8.0-31-generic  N/A
   linux-firmware1.106
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
  Tags:  raring
  Uname: Linux 3.8.0-31-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 11/06/2012
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 68IRR Ver. F.32
  dmi.board.name: 17F6
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 58.1D
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr68IRRVer.F.32:bd11/06/2012:svnHewlett-Packard:pnHPProBook4540s:pvrA1018C1100:rvnHewlett-Packard:rn17F6:rvrKBCVersion58.1D:cvnHewlett-Packard:ct10:cvr:
  dmi.product.name: HP ProBook 4540s
  dmi.product.version: A1018C1100
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/1189721/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1406398] Re: [HP Stream Notebook - 11-d010nr] Clickpad click does click reliably

[Jesse Johnson]

I can confirm that this was fixed in kernel 3.19 (Ubuntu 15.04).

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1406398

Title:
  [HP Stream Notebook - 11-d010nr] Clickpad click does click reliably

Status in linux package in Ubuntu:
  Expired

Bug description:
  Using the Ubuntu 15.04 daily build as of 2014-12-29, the HP Stream 11
  laptop touchpad cannot reliably cilck.

  The touchpad is a clickpad where the entire touchpad is pushed down to
  simulate a click. Alternatively, the user can lightly tap the touchpad
  once to send a left click command, or tap with two fingers to send a
  right click command. There are no other buttons. It seems that the
  touchpad works fine with the exception that after some time clicks
  fail to register. Usually if I quickly alternate between left and
  right clicks, eventually the left click feature will work.
  Occasionally the mouse will also fail to click into the area the
  cursor hovering over, instead effecting the active widget selection
  irregardless of the cursor location on the screen.

  I updated the BIOS, but the problem still occurs after a few minutes
  of use.

  The output of the dmidecode command is:
  F.06
  11/14/2014

  The computer model is 11-d010nr.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.16.0-28-generic 3.16.0-28.38
  ProcVersionSignature: Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1
  Uname: Linux 3.16.0-28-generic x86_64
  ApportVersion: 2.15.1-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2683 F pulseaudio
  CasperVersion: 1.347
  CurrentDesktop: Unity
  Date: Mon Dec 29 21:48:05 2014
  LiveMediaBuild: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20141229)
  MachineType: Hewlett-Packard HP Stream Notebook PC 11
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi 
file=/cdrom/preseed/username.seed boot=casper quiet splash --
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-28-generic N/A
   linux-backports-modules-3.16.0-28-generic  N/A
   linux-firmware 1.140
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/14/2014
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.06
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 8023
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 54.11
  dmi.chassis.asset.tag: Chassis Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.06:bd11/14/2014:svnHewlett-Packard:pnHPStreamNotebookPC11:pvrType1-ProductConfigId:rvnHewlett-Packard:rn8023:rvr54.11:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Stream Notebook PC 11
  dmi.product.version: Type1 - ProductConfigId
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1406398/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1487905] [NEW] package linux-image-3.16.0-46-generic (not installed) failed to install/upgrade: cannot copy extracted data for './boot/vmlinuz-3.16.0-46-generic' to '/boot/vmlin

[francisco]

Public bug reported:

paquete no instalado

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: linux-image-3.16.0-46-generic (not installed)
ProcVersionSignature: Ubuntu 3.16.0-43.58~14.04.1-generic 3.16.7-ckt13
Uname: Linux 3.16.0-43-generic i686
ApportVersion: 2.14.1-0ubuntu3.11
Architecture: i386
Date: Thu Aug 20 13:16:48 2015
DuplicateSignature: package:linux-image-3.16.0-46-generic:(not 
installed):cannot copy extracted data for './boot/vmlinuz-3.16.0-46-generic' to 
'/boot/vmlinuz-3.16.0-46-generic.dpkg-new': unexpected end of file or stream
ErrorMessage: cannot copy extracted data for './boot/vmlinuz-3.16.0-46-generic' 
to '/boot/vmlinuz-3.16.0-46-generic.dpkg-new': unexpected end of file or stream
InstallationDate: Installed on 2015-06-07 (77 days ago)
InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release i386 (20150218.1)
SourcePackage: linux-lts-utopic
Title: package linux-image-3.16.0-46-generic (not installed) failed to 
install/upgrade: cannot copy extracted data for 
'./boot/vmlinuz-3.16.0-46-generic' to 
'/boot/vmlinuz-3.16.0-46-generic.dpkg-new': unexpected end of file or stream
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: linux-lts-utopic (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386 trusty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1487905

Title:
  package linux-image-3.16.0-46-generic (not installed) failed to
  install/upgrade: cannot copy extracted data for
  './boot/vmlinuz-3.16.0-46-generic' to '/boot/vmlinuz-3.16.0-46-generic
  .dpkg-new': unexpected end of file or stream

Status in linux-lts-utopic package in Ubuntu:
  New

Bug description:
  paquete no instalado

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.16.0-46-generic (not installed)
  ProcVersionSignature: Ubuntu 3.16.0-43.58~14.04.1-generic 3.16.7-ckt13
  Uname: Linux 3.16.0-43-generic i686
  ApportVersion: 2.14.1-0ubuntu3.11
  Architecture: i386
  Date: Thu Aug 20 13:16:48 2015
  DuplicateSignature: package:linux-image-3.16.0-46-generic:(not 
installed):cannot copy extracted data for './boot/vmlinuz-3.16.0-46-generic' to 
'/boot/vmlinuz-3.16.0-46-generic.dpkg-new': unexpected end of file or stream
  ErrorMessage: cannot copy extracted data for 
'./boot/vmlinuz-3.16.0-46-generic' to 
'/boot/vmlinuz-3.16.0-46-generic.dpkg-new': unexpected end of file or stream
  InstallationDate: Installed on 2015-06-07 (77 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release i386 
(20150218.1)
  SourcePackage: linux-lts-utopic
  Title: package linux-image-3.16.0-46-generic (not installed) failed to 
install/upgrade: cannot copy extracted data for 
'./boot/vmlinuz-3.16.0-46-generic' to 
'/boot/vmlinuz-3.16.0-46-generic.dpkg-new': unexpected end of file or stream
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1487905/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1487905] Re: package linux-image-3.16.0-46-generic (not installed) failed to install/upgrade: cannot copy extracted data for './boot/vmlinuz-3.16.0-46-generic' to '/boot/vmlinuz

[Apport retracing service]

** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1487905

Title:
  package linux-image-3.16.0-46-generic (not installed) failed to
  install/upgrade: cannot copy extracted data for
  './boot/vmlinuz-3.16.0-46-generic' to '/boot/vmlinuz-3.16.0-46-generic
  .dpkg-new': unexpected end of file or stream

Status in linux-lts-utopic package in Ubuntu:
  New

Bug description:
  paquete no instalado

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.16.0-46-generic (not installed)
  ProcVersionSignature: Ubuntu 3.16.0-43.58~14.04.1-generic 3.16.7-ckt13
  Uname: Linux 3.16.0-43-generic i686
  ApportVersion: 2.14.1-0ubuntu3.11
  Architecture: i386
  Date: Thu Aug 20 13:16:48 2015
  DuplicateSignature: package:linux-image-3.16.0-46-generic:(not 
installed):cannot copy extracted data for './boot/vmlinuz-3.16.0-46-generic' to 
'/boot/vmlinuz-3.16.0-46-generic.dpkg-new': unexpected end of file or stream
  ErrorMessage: cannot copy extracted data for 
'./boot/vmlinuz-3.16.0-46-generic' to 
'/boot/vmlinuz-3.16.0-46-generic.dpkg-new': unexpected end of file or stream
  InstallationDate: Installed on 2015-06-07 (77 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release i386 
(20150218.1)
  SourcePackage: linux-lts-utopic
  Title: package linux-image-3.16.0-46-generic (not installed) failed to 
install/upgrade: cannot copy extracted data for 
'./boot/vmlinuz-3.16.0-46-generic' to 
'/boot/vmlinuz-3.16.0-46-generic.dpkg-new': unexpected end of file or stream
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1487905/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1485057] Re: "lsusb -v" as root freezes the kernel on Acer ES1-111

[Roland Weber]

** Attachment added: "output of "git bisect log""
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1485057/+attachment/4451330/+files/bisect.log

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1485057

Title:
  "lsusb -v" as root freezes the kernel on Acer ES1-111

Status in linux package in Ubuntu:
  Triaged

Bug description:
  reproducible: always

  Steps to reproduce:
  - open a terminal
  - sudo bash
  - lsusb -v

  In a virtual terminal, the command prints the name of the first device
  it finds, then the system freezes completely. In a terminal of the
  desktop, I don't even get the name of the device, the system freezes
  immediately. Either way, I have to power off the machine. There is no
  kernel oops. Nothing is written to the log. The magic sysreq key
  yields no response, although I have verified that it works before
  triggering the freeze.

  I've narrowed down the problem by calling "lsusb -v -s ". The
  system freezes on both devices of bus 3 (003:001 and 003:002). For all
  other devices, it prints the expected output and continues to work.
  When calling lsusb as a regular user, I get "Couldn't open device,
  some information will be missing", then the regular output, and the
  system keeps running. Therefore I assume that the problem is somewhere
  in the kernel, when the devices are accessed.

  This is a regression. It used to work in 14.10, and fails to work since 15.04.
  It also used to work in 14.04.2, and fails in 14.04.3.
  It fails with mainline builds 4.2.0-rc6-unstable, 4.2.0-rc2-unstable, 
4.1.0-rc2-vivid. (yeah, I've been trying for a while :-)

  Incidentally, the shutdown sequence also freezes early on with the
  kernels that exhibit the problem; but I cannot be sure that the cause
  is the same. I decided to first chase the USB freeze, because it was
  easier to gather information about that.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-25-generic 3.19.0-25.26
  ProcVersionSignature: Ubuntu 3.19.0-25.26-generic 3.19.8-ckt2
  Uname: Linux 3.19.0-25-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  rweber 1525 F pulseaudio
  CurrentDesktop: XFCE
  Date: Fri Aug 14 18:38:36 2015
  HibernationDevice: RESUME=UUID=8a45266d-0232-428e-bb25-113d23caaf8a
  InstallationDate: Installed on 2015-06-28 (46 days ago)
  InstallationMedia: Xubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  MachineType: Acer Aspire ES1-111M
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-generic 
root=UUID=b8872e03-7295-4cbd-ac86-06b9be2f112f ro quiet splash 
crashkernel=384M-:128M vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-25-generic N/A
   linux-backports-modules-3.19.0-25-generic  N/A
   linux-firmware 1.143.3
  SourcePackage: linux
  UpgradeStatus: Upgraded to vivid on 2015-07-05 (39 days ago)
  dmi.bios.date: 08/20/2014
  dmi.bios.vendor: Insyde Corp.
  dmi.bios.version: V1.08
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: R2
  dmi.board.vendor: Acer
  dmi.board.version: Type2 - A01 Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Chassis Manufacturer
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsydeCorp.:bvrV1.08:bd08/20/2014:svnAcer:pnAspireES1-111M:pvrV1.08:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion:
  dmi.product.name: Aspire ES1-111M
  dmi.product.version: V1.08
  dmi.sys.vendor: Acer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1485057/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1485057] Re: "lsusb -v" as root freezes the kernel on Acer ES1-111

[Roland Weber]

As requested on the linux-usb mailing list, I've bisected the problem in
the mainline git repository.

638139eb95d2d241781330a321e88c8dafe46078 is the first bad commit
commit 638139eb95d2d241781330a321e88c8dafe46078
Author: Petr Mladek 
Date:   Fri Sep 19 17:32:24 2014 +0200

usb: hub: allow to process more usb hub events in parallel

It seems that only choose_devnum() was not ready to process more hub
events at the same time.

All should be fine if we take bus->usb_address0_mutex there. It will
make sure that more devnums will not be chosen for the given bus and
the related devices at the same time.

Signed-off-by: Petr Mladek 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman 

:04 04 6c3b464b8db2bec572cf7904c0aac317b41c1eec
da3ee40957d0637f17895ae05aad4a6646377b2a M  drivers

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1485057

Title:
  "lsusb -v" as root freezes the kernel on Acer ES1-111

Status in linux package in Ubuntu:
  Triaged

Bug description:
  reproducible: always

  Steps to reproduce:
  - open a terminal
  - sudo bash
  - lsusb -v

  In a virtual terminal, the command prints the name of the first device
  it finds, then the system freezes completely. In a terminal of the
  desktop, I don't even get the name of the device, the system freezes
  immediately. Either way, I have to power off the machine. There is no
  kernel oops. Nothing is written to the log. The magic sysreq key
  yields no response, although I have verified that it works before
  triggering the freeze.

  I've narrowed down the problem by calling "lsusb -v -s ". The
  system freezes on both devices of bus 3 (003:001 and 003:002). For all
  other devices, it prints the expected output and continues to work.
  When calling lsusb as a regular user, I get "Couldn't open device,
  some information will be missing", then the regular output, and the
  system keeps running. Therefore I assume that the problem is somewhere
  in the kernel, when the devices are accessed.

  This is a regression. It used to work in 14.10, and fails to work since 15.04.
  It also used to work in 14.04.2, and fails in 14.04.3.
  It fails with mainline builds 4.2.0-rc6-unstable, 4.2.0-rc2-unstable, 
4.1.0-rc2-vivid. (yeah, I've been trying for a while :-)

  Incidentally, the shutdown sequence also freezes early on with the
  kernels that exhibit the problem; but I cannot be sure that the cause
  is the same. I decided to first chase the USB freeze, because it was
  easier to gather information about that.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-25-generic 3.19.0-25.26
  ProcVersionSignature: Ubuntu 3.19.0-25.26-generic 3.19.8-ckt2
  Uname: Linux 3.19.0-25-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  rweber 1525 F pulseaudio
  CurrentDesktop: XFCE
  Date: Fri Aug 14 18:38:36 2015
  HibernationDevice: RESUME=UUID=8a45266d-0232-428e-bb25-113d23caaf8a
  InstallationDate: Installed on 2015-06-28 (46 days ago)
  InstallationMedia: Xubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  MachineType: Acer Aspire ES1-111M
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-generic 
root=UUID=b8872e03-7295-4cbd-ac86-06b9be2f112f ro quiet splash 
crashkernel=384M-:128M vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-25-generic N/A
   linux-backports-modules-3.19.0-25-generic  N/A
   linux-firmware 1.143.3
  SourcePackage: linux
  UpgradeStatus: Upgraded to vivid on 2015-07-05 (39 days ago)
  dmi.bios.date: 08/20/2014
  dmi.bios.vendor: Insyde Corp.
  dmi.bios.version: V1.08
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: R2
  dmi.board.vendor: Acer
  dmi.board.version: Type2 - A01 Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Chassis Manufacturer
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsydeCorp.:bvrV1.08:bd08/20/2014:svnAcer:pnAspireES1-111M:pvrV1.08:rvnAcer:rnR2:rvrType2-A01BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion:
  dmi.product.name: Aspire ES1-111M
  dmi.product.version: V1.08
  dmi.sys.vendor: Acer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1485057/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1487905] Re: package linux-image-3.16.0-46-generic (not installed) failed to install/upgrade: cannot copy extracted data for './boot/vmlinuz-3.16.0-46-generic' to '/boot/vmlinuz

[Ubuntu Foundations Team Bug Bot]

Thank you for taking the time to report this bug and helping to make
Ubuntu better.  It seems that there was an error on your system when
trying to install a particular package.  Please execute the following
command, as it will clear your package cache, in a terminal:

sudo apt-get clean

Then try performing the update again.  This will likely resolve your
issue, but the failure could be caused by filesystem or memory
corruption.  So please also run a fsck on your filesystem(s) and a
memory test.  Thanks in advance!

[This is an automated message.  I apologize if it reached you
inappropriately; please just reply to this message indicating so.]

** Tags added: corrupted-package

** Changed in: linux-lts-utopic (Ubuntu)
   Status: New => Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1487905

Title:
  package linux-image-3.16.0-46-generic (not installed) failed to
  install/upgrade: cannot copy extracted data for
  './boot/vmlinuz-3.16.0-46-generic' to '/boot/vmlinuz-3.16.0-46-generic
  .dpkg-new': unexpected end of file or stream

Status in linux-lts-utopic package in Ubuntu:
  Invalid

Bug description:
  paquete no instalado

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.16.0-46-generic (not installed)
  ProcVersionSignature: Ubuntu 3.16.0-43.58~14.04.1-generic 3.16.7-ckt13
  Uname: Linux 3.16.0-43-generic i686
  ApportVersion: 2.14.1-0ubuntu3.11
  Architecture: i386
  Date: Thu Aug 20 13:16:48 2015
  DuplicateSignature: package:linux-image-3.16.0-46-generic:(not 
installed):cannot copy extracted data for './boot/vmlinuz-3.16.0-46-generic' to 
'/boot/vmlinuz-3.16.0-46-generic.dpkg-new': unexpected end of file or stream
  ErrorMessage: cannot copy extracted data for 
'./boot/vmlinuz-3.16.0-46-generic' to 
'/boot/vmlinuz-3.16.0-46-generic.dpkg-new': unexpected end of file or stream
  InstallationDate: Installed on 2015-06-07 (77 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release i386 
(20150218.1)
  SourcePackage: linux-lts-utopic
  Title: package linux-image-3.16.0-46-generic (not installed) failed to 
install/upgrade: cannot copy extracted data for 
'./boot/vmlinuz-3.16.0-46-generic' to 
'/boot/vmlinuz-3.16.0-46-generic.dpkg-new': unexpected end of file or stream
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1487905/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1436940] Re: Atheros wifi 168c:0041(QCA6164) is not supported

[Diego]

Hi,

glad is working! I guess I will have to be extra careful when upgrading
my kernel now. Thanks for letting me know that :).

Hopefully support will be added to newer kernels though :).

Best,
Diego

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1436940

Title:
  Atheros wifi 168c:0041(QCA6164) is not supported

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Vivid:
  Confirmed
Status in linux source package in Wily:
  Confirmed

Bug description:
  The atheros wireless device (168c:0041) isn't supported by the
  ath10k_pci kernel driver.

  Found in several laptop models:

  Lenovo Z70
  Lenovo G50-45
  Lenovo G50-80
  Lenovo Edge 15
  Lenovo Yoga 3 11
  Lenovo Flex 3-1470
  Samsung ATIV Book 9 NP930X2K

  ProblemType: BugDistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-9-generic 3.19.0-9.9
  ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1
  Uname: Linux 3.19.0-9-generic x86_64
  ApportVersion: 2.16.2-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nicholas   1695 F pulseaudio
   /dev/snd/controlC1:  nicholas   1695 F pulseaudio
  CurrentDesktop: Unity
  Date: Thu Mar 26 09:47:16 2015
  HibernationDevice: RESUME=UUID=5b068cd8-e60a-49b9-a88e-1581bb6b3dc1
  InstallationDate: Installed on 2015-03-25 (1 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 004: ID 0cf3:e300 Atheros Communications, Inc.
   Bus 001 Device 003: ID 5986:0652 Acer, Inc
   Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card 
Reader Controller
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: LENOVO 80E5
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-9-generic 
root=UUID=e52867c5-0b50-42fb-8288-f30765f926c5 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-9-generic N/A
   linux-backports-modules-3.19.0-9-generic  N/A
   linux-firmware1.143SourcePackage: linux
  UpgradeStatus: Upgraded to vivid on 2015-03-26 (0 days ago)
  dmi.bios.date: 06/20/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: B0CN69WW
  dmi.board.asset.tag: NO Asset Tag
  dmi.board.name: Lenovo G50-80
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058 WIN
  dmi.chassis.asset.tag: NO Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo G50-80
  dmi.modalias: 
dmi:bvnLENOVO:bvrB0CN69WW:bd06/20/2014:svnLENOVO:pn80E5:pvrLenovoG50-80:rvnLENOVO:rnLenovoG50-80:rvr31900058WIN:cvnLENOVO:ct10:cvrLenovoG50-80:
  dmi.product.name: 80E5
  dmi.product.version: Lenovo G50-80
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1436940/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1383184] Re: Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] is not supported

[santicas20]

For me on a clean install of Ubuntu 15.04 with kernel 3.19.0-15-generic
it worked.

First I installed dkms:

$ sudo apt-get install dkms

Then I followed post #258  downloading the package from post #244.

After restarting Wifi was recognized immediately, but the first time I 
connected to my network the speed was extremely slow.
After connecting and disconnecting a couple of times, it is now working fine, 
although I haven't tested the speed thoroughly compared to windows.

Thanks to Adam and Aaron!

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1383184

Title:
  Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] is not supported

Status in HWE Next:
  Triaged
Status in linux package in Ubuntu:
  Triaged
Status in linux-firmware package in Ubuntu:
  Triaged

Bug description:
  Card detail: Qualcomm Atheros Device [168c:003e] (rev 20)
  Subsystem: Bigfoot Networks, Inc. Device [1a56:1525]

  This is on a fully updated Ubuntu Server 14.04 installation, with the 
ubuntu-desktop environment installed. This happened in order to get the md raid 
drivers for raid0 on my system, as the desktop version doesn't support them.
  ---
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  matanis2333 F pulseaudio
   /dev/snd/controlC0:  matanis2333 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=1b192ee3-f592-43e9-bdcf-08b91c0aa9b6
  InstallationDate: Installed on 2014-10-16 (3 days ago)
  InstallationMedia: Ubuntu-Server 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.3)
  IwConfig:
   p2p1  no wireless extensions.

   lono wireless extensions.
  MachineType: Micro-Star International Co., Ltd. GT72 2QE
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcFB: 0 EFI VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic.efi.signed 
root=UUID=80998dbb-1f89-4eda-be90-25e35e1c0a90 ro
  ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-37-generic N/A
   linux-backports-modules-3.13.0-37-generic  N/A
   linux-firmware 1.127.7
  RfKill:

  Tags:  trusty
  Uname: Linux 3.13.0-37-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 09/15/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: E1781IMS.10D
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MS-1781
  dmi.board.vendor: Micro-Star International Co., Ltd.
  dmi.board.version: REV:0.C
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrE1781IMS.10D:bd09/15/2014:svnMicro-StarInternationalCo.,Ltd.:pnGT722QE:pvrREV0.C:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1781:rvrREV0.C:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: GT72 2QE
  dmi.product.version: REV:0.C
  dmi.sys.vendor: Micro-Star International Co., Ltd.

  Qualcomm Atheros Device [168c:003e] (rev 20)

  mainline commit d63955b33b3bee45d784ffdfafeb93076c765660

  [6.221281] ath10k_pci :02:00.0: pci irq msi interrupts 1 irq_mode 0 
reset_mode 0
  [6.417386] ath10k_pci :02:00.0: Direct firmware load for 
ath10k/cal-pci-:02:00.0.bin failed with error -2
  [6.417404] ath10k_pci :02:00.0: Direct firmware load for 
ath10k/QCA6174/hw2.1/board-pci-168c:003e:17aa:3044.bin failed with error -2
  [6.417407] ath10k_pci :02:00.0: failed to load spec board file, 
falling back to generic: -2
  [6.417416] ath10k_pci :02:00.0: Direct firmware load for 
ath10k/QCA6174/hw2.1/board.bin failed with error -2
  [6.417418] ath10k_pci :02:00.0: failed to fetch generic board data: -2
  [6.417420] ath10k_pci :02:00.0: failed to fetch board file: -2
  [6.417421] ath10k_pci :02:00.0: could not fetch firmware files (-2)
  [6.417423] ath10k_pci :02:00.0: could not probe fw (-2)

  failed to find it in https://github.com/kvalo/ath10k-firmware or
  https://github.com/sumdog/ath10k-firmware

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1383184/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1487125] Re: [Regression] Unprivileged containers fail to start in linux-lts-utopic

[Brad Figg]

** Tags added: verification-needed-trusty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1487125

Title:
  [Regression] Unprivileged containers fail to start in linux-lts-utopic

Status in linux-lts-utopic package in Ubuntu:
  Fix Committed

Bug description:
  == SRU Justification ==

  Impact: linux-lts-utopic 3.16.0-46.62 contains a regression which
  prevents unprivileged containers from starting due to a failure
  mounting sysfs.

  Fix: Backport of upstream commit
  f9bb48825a6b5d02f4cabcc78967c75db903dcdc, which is marked for stable
  but is missing from 3.16 stable. Another stable commit that did get
  into 3.16 requires this patch.

  Regression potential: This patch is specifically targeted at
  unprivileged mounts of virtual filesystems in containers and fixes a
  regression there. It should have no impact on mounts in the host.

  ---

  linux-lts-utopic 3.16.0-46.62 contains a regression mounting
  unprivileged containers. The log shows a failure mounting sysfs:

    lxc-start 20150427012246.807 ERRORlxc_conf -
  conf.c:lxc_mount_auto_mounts:819 - Operation not permitted - error
  mounting sysfs on /usr/lib/x86_64-linux-gnu/lxc/sys flags 14

  This is due to missing upstream commit
  f9bb48825a6b5d02f4cabcc78967c75db903dcdc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1487125/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1440949] Re: [Dell Inspiron 3543] Wireless key does not work on 14.04.2

[Brad Figg]

** Tags added: verification-needed-trusty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1440949

Title:
  [Dell Inspiron 3543] Wireless key does not work on 14.04.2

Status in HWE Next:
  In Progress
Status in linux package in Ubuntu:
  Incomplete
Status in linux-lts-utopic package in Ubuntu:
  Fix Committed
Status in linux source package in Vivid:
  Fix Committed
Status in linux-lts-utopic source package in Vivid:
  New

Bug description:
  CID: 201408-15437 Dell Inspiron 3543

  The wireless key does not work on this system at all with14.04.2 (3.16 kernel)
  Maybe it's related to the udev -> systemd migration (similar to bug 1434442)

  ubuntu@201408-15437:~$ sudo showkey -k
  [sudo] password for ubuntu: 
  kb mode was ?UNKNOWN?
  [ if you are trying this under X, it might not work
  since the X server is also reading /dev/console ]

  press any key (program terminates 10s after last keypress)...
  keycode  28 release
  keycode 240 press
  keycode 240 release
  keycode  29 press
  ^Ccaught signal 2, cleaning up...
  ubuntu@201408-15437:~$

  nothing could be detected by "sudo showkey -s"

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.16.0-33-generic 3.16.0-33.44~14.04.1
  ProcVersionSignature: Ubuntu 3.16.0-33.44~14.04.1-generic 3.16.7-ckt7
  Uname: Linux 3.16.0-33-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.8
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Apr  6 22:17:20 2015
  InstallationDate: Installed on 2015-04-03 (3 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 
(20150218.1)
  SourcePackage: linux-lts-utopic
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1440949/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1454892] Re: [Hyper-V] hv_netvsc: Use the xmit_more skb flag to optimize signaling the host

[Brad Figg]

** Tags added: verification-needed-trusty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1454892

Title:
  [Hyper-V] hv_netvsc: Use the xmit_more skb flag to optimize signaling
  the host

Status in linux package in Ubuntu:
  Fix Released
Status in linux-lts-utopic package in Ubuntu:
  Fix Committed
Status in linux source package in Precise:
  Confirmed
Status in linux source package in Trusty:
  Confirmed
Status in linux-lts-utopic source package in Trusty:
  Fix Committed
Status in linux source package in Utopic:
  Fix Committed
Status in linux source package in Vivid:
  Fix Committed
Status in linux source package in Wily:
  Fix Released

Bug description:
  hv_netvsc: Use the xmit_more skb flag to optimize signaling the host
  Based on the information given to this driver (via the xmit_more skb flag),
  we can defer signaling the host if more packets are on the way. This will help
  make the host more efficient since it can potentially process a larger batch 
of
  packets. Implement this optimization.

  Upstream commit: https://git.kernel.org/cgit/linux/kernel/git/davem
  /net-next.git/commit/?id=82fa3c776e5abba7ed6e4b4f4983d14731c37d6a

  This commit may imply other commits previously requested, for example
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1452074

  Requested for all typical Hyper-V targets: 15.10, 15.04, 14.10, 14.04,
  14.04 HWE, 12.02, and 12.02 HWE

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1454892/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1487919] [NEW] macbookrpro12, 1 fails to suspend

[Joe Barnett]

Public bug reported:

I've installed wily on a new macbookpro12,1 (2015 model), and suspending
the system results in the screen going black and the apple light turning
off, but the system is not fully asleep -- the 'force touch' pad still
makes clicking feedback, and the machine continues to generate heat and
spin fans if put into a bag.  Once in this state, the machine cannot be
woken up from the state its in either.

did a "journalctl -f | tee sleep.log' while this was happening and got
the following output -- let me know if there is a better way to figure
out where things are going wrong:


Aug 23 15:13:21 spiny NetworkManager[820]:  sleep requested (sleeping: no 
 enabled: yes)
Aug 23 15:13:21 spiny NetworkManager[820]:  sleeping...
Aug 23 15:13:21 spiny NetworkManager[820]:  (wlp3s0): device state 
change: activated -> unmanaged (reason 'sleeping') [100 10 37]
Aug 23 15:13:21 spiny NetworkManager[820]:  (wlp3s0): deactivating device 
(reason 'sleeping') [37]
Aug 23 15:13:21 spiny NetworkManager[820]:  (wlp3s0): canceled DHCP 
transaction, DHCP client pid 925
Aug 23 15:13:21 spiny avahi-daemon[826]: Withdrawing address record for 
2601:1c0:4d00:39e6:f912:fbb6:aaa6:4429 on wlp3s0.
Aug 23 15:13:21 spiny avahi-daemon[826]: Withdrawing address record for 
2601:1c0:4d00:39e6:290:4cff:fe0d:f43e on wlp3s0.
Aug 23 15:13:21 spiny avahi-daemon[826]: Leaving mDNS multicast group on 
interface wlp3s0.IPv6 with address 2601:1c0:4d00:39e6:290:4cff:fe0d:f43e.
Aug 23 15:13:21 spiny avahi-daemon[826]: Joining mDNS multicast group on 
interface wlp3s0.IPv6 with address fe80::290:4cff:fe0d:f43e.
Aug 23 15:13:21 spiny avahi-daemon[826]: Registering new address record for 
fe80::290:4cff:fe0d:f43e on wlp3s0.*.
Aug 23 15:13:21 spiny avahi-daemon[826]: Withdrawing address record for 
fe80::290:4cff:fe0d:f43e on wlp3s0.
Aug 23 15:13:21 spiny avahi-daemon[826]: Leaving mDNS multicast group on 
interface wlp3s0.IPv6 with address fe80::290:4cff:fe0d:f43e.
Aug 23 15:13:21 spiny avahi-daemon[826]: Interface wlp3s0.IPv6 no longer 
relevant for mDNS.
Aug 23 15:13:21 spiny wpa_supplicant[891]: wlp3s0: CTRL-EVENT-DISCONNECTED 
bssid=10:c3:7b:c5:83:d8 reason=3 locally_generated=1
Aug 23 15:13:21 spiny wpa_supplicant[891]: nl80211: Was expecting local 
disconnect but got another disconnect event first
Aug 23 15:13:21 spiny avahi-daemon[826]: Withdrawing address record for 
192.168.1.83 on wlp3s0.
Aug 23 15:13:21 spiny avahi-daemon[826]: Leaving mDNS multicast group on 
interface wlp3s0.IPv4 with address 192.168.1.83.
Aug 23 15:13:21 spiny avahi-daemon[826]: Interface wlp3s0.IPv4 no longer 
relevant for mDNS.
Aug 23 15:13:21 spiny kernel: cfg80211: Calling CRDA to update world regulatory 
domain
Aug 23 15:13:21 spiny NetworkManager[820]:  Writing DNS information to 
/sbin/resolvconf
Aug 23 15:13:21 spiny dnsmasq[928]: setting upstream servers from DBus
Aug 23 15:13:21 spiny dnsmasq[928]: using nameserver 2601:1c0:4d00:39e6::1#53
Aug 23 15:13:21 spiny dbus[806]: [system] Rejected send message, 10 matched 
rules; type="method_return", sender=":1.22" (uid=0 pid=928 
comm="/usr/sbin/dnsmasq --no-resolv --keep-in-foreground") interface="(unset)" 
member="(unset)" error name="(unset)" requested_reply="0" destination=":1.6" 
(uid=0 pid=820 comm="/usr/sbin/NetworkManager --no-daemon ")
Aug 23 15:13:21 spiny wpa_supplicant[891]: p2p-dev-wlp3s0: 
CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
Aug 23 15:13:21 spiny NetworkManager[820]:  Writing DNS information to 
/sbin/resolvconf
Aug 23 15:13:21 spiny kernel: brcmf_cfg80211_reg_notifier: not a ISO3166 code
Aug 23 15:13:21 spiny kernel: cfg80211: World regulatory domain updated:
Aug 23 15:13:21 spiny kernel: cfg80211:  DFS Master region: unset
Aug 23 15:13:21 spiny kernel: cfg80211:   (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp), (dfs_cac_time)
Aug 23 15:13:21 spiny kernel: cfg80211:   (2402000 KHz - 2472000 KHz @ 4 
KHz), (N/A, 2000 mBm), (N/A)
Aug 23 15:13:21 spiny kernel: cfg80211:   (2457000 KHz - 2482000 KHz @ 4 
KHz), (N/A, 2000 mBm), (N/A)
Aug 23 15:13:21 spiny kernel: cfg80211:   (2474000 KHz - 2494000 KHz @ 2 
KHz), (N/A, 2000 mBm), (N/A)
Aug 23 15:13:21 spiny kernel: cfg80211:   (517 KHz - 525 KHz @ 8 
KHz, 16 KHz AUTO), (N/A, 2000 mBm), (N/A)
Aug 23 15:13:21 spiny kernel: cfg80211:   (525 KHz - 533 KHz @ 8 
KHz, 16 KHz AUTO), (N/A, 2000 mBm), (0 s)
Aug 23 15:13:21 spiny kernel: cfg80211:   (549 KHz - 573 KHz @ 16 
KHz), (N/A, 2000 mBm), (0 s)
Aug 23 15:13:21 spiny kernel: cfg80211:   (5735000 KHz - 5835000 KHz @ 8 
KHz), (N/A, 2000 mBm), (N/A)
Aug 23 15:13:21 spiny kernel: cfg80211:   (5724 KHz - 6372 KHz @ 
216 KHz), (N/A, 0 mBm), (N/A)
Aug 23 15:13:21 spiny dnsmasq[928]: setting upstream servers from DBus
Aug 23 15:13:21 spiny dbus[806]: [system] Rejected send message, 10 matched 
rules; type="method_return", sender=":1.22" (uid=0 pid=928 
comm="/usr/sbin/dnsmasq --no-resolv --keep-in-foregroun

[Kernel-packages] [Bug 1487919] Status changed to Confirmed

[Brad Figg]

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1487919

Title:
  macbookrpro12,1 fails to suspend

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  I've installed wily on a new macbookpro12,1 (2015 model), and
  suspending the system results in the screen going black and the apple
  light turning off, but the system is not fully asleep -- the 'force
  touch' pad still makes clicking feedback, and the machine continues to
  generate heat and spin fans if put into a bag.  Once in this state,
  the machine cannot be woken up from the state its in either.

  did a "journalctl -f | tee sleep.log' while this was happening and got
  the following output -- let me know if there is a better way to figure
  out where things are going wrong:


  Aug 23 15:13:21 spiny NetworkManager[820]:  sleep requested (sleeping: 
no  enabled: yes)
  Aug 23 15:13:21 spiny NetworkManager[820]:  sleeping...
  Aug 23 15:13:21 spiny NetworkManager[820]:  (wlp3s0): device state 
change: activated -> unmanaged (reason 'sleeping') [100 10 37]
  Aug 23 15:13:21 spiny NetworkManager[820]:  (wlp3s0): deactivating 
device (reason 'sleeping') [37]
  Aug 23 15:13:21 spiny NetworkManager[820]:  (wlp3s0): canceled DHCP 
transaction, DHCP client pid 925
  Aug 23 15:13:21 spiny avahi-daemon[826]: Withdrawing address record for 
2601:1c0:4d00:39e6:f912:fbb6:aaa6:4429 on wlp3s0.
  Aug 23 15:13:21 spiny avahi-daemon[826]: Withdrawing address record for 
2601:1c0:4d00:39e6:290:4cff:fe0d:f43e on wlp3s0.
  Aug 23 15:13:21 spiny avahi-daemon[826]: Leaving mDNS multicast group on 
interface wlp3s0.IPv6 with address 2601:1c0:4d00:39e6:290:4cff:fe0d:f43e.
  Aug 23 15:13:21 spiny avahi-daemon[826]: Joining mDNS multicast group on 
interface wlp3s0.IPv6 with address fe80::290:4cff:fe0d:f43e.
  Aug 23 15:13:21 spiny avahi-daemon[826]: Registering new address record for 
fe80::290:4cff:fe0d:f43e on wlp3s0.*.
  Aug 23 15:13:21 spiny avahi-daemon[826]: Withdrawing address record for 
fe80::290:4cff:fe0d:f43e on wlp3s0.
  Aug 23 15:13:21 spiny avahi-daemon[826]: Leaving mDNS multicast group on 
interface wlp3s0.IPv6 with address fe80::290:4cff:fe0d:f43e.
  Aug 23 15:13:21 spiny avahi-daemon[826]: Interface wlp3s0.IPv6 no longer 
relevant for mDNS.
  Aug 23 15:13:21 spiny wpa_supplicant[891]: wlp3s0: CTRL-EVENT-DISCONNECTED 
bssid=10:c3:7b:c5:83:d8 reason=3 locally_generated=1
  Aug 23 15:13:21 spiny wpa_supplicant[891]: nl80211: Was expecting local 
disconnect but got another disconnect event first
  Aug 23 15:13:21 spiny avahi-daemon[826]: Withdrawing address record for 
192.168.1.83 on wlp3s0.
  Aug 23 15:13:21 spiny avahi-daemon[826]: Leaving mDNS multicast group on 
interface wlp3s0.IPv4 with address 192.168.1.83.
  Aug 23 15:13:21 spiny avahi-daemon[826]: Interface wlp3s0.IPv4 no longer 
relevant for mDNS.
  Aug 23 15:13:21 spiny kernel: cfg80211: Calling CRDA to update world 
regulatory domain
  Aug 23 15:13:21 spiny NetworkManager[820]:  Writing DNS information to 
/sbin/resolvconf
  Aug 23 15:13:21 spiny dnsmasq[928]: setting upstream servers from DBus
  Aug 23 15:13:21 spiny dnsmasq[928]: using nameserver 2601:1c0:4d00:39e6::1#53
  Aug 23 15:13:21 spiny dbus[806]: [system] Rejected send message, 10 matched 
rules; type="method_return", sender=":1.22" (uid=0 pid=928 
comm="/usr/sbin/dnsmasq --no-resolv --keep-in-foreground") interface="(unset)" 
member="(unset)" error name="(unset)" requested_reply="0" destination=":1.6" 
(uid=0 pid=820 comm="/usr/sbin/NetworkManager --no-daemon ")
  Aug 23 15:13:21 spiny wpa_supplicant[891]: p2p-dev-wlp3s0: 
CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
  Aug 23 15:13:21 spiny NetworkManager[820]:  Writing DNS information to 
/sbin/resolvconf
  Aug 23 15:13:21 spiny kernel: brcmf_cfg80211_reg_notifier: not a ISO3166 code
  Aug 23 15:13:21 spiny kernel: cfg80211: World regulatory domain updated:
  Aug 23 15:13:21 spiny kernel: cfg80211:  DFS Master region: unset
  Aug 23 15:13:21 spiny kernel: cfg80211:   (start_freq - end_freq @ 
bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  Aug 23 15:13:21 spiny kernel: cfg80211:   (2402000 KHz - 2472000 KHz @ 4 
KHz), (N/A, 2000 mBm), (N/A)
  Aug 23 15:13:21 spiny kernel: cfg80211:   (2457000 KHz - 2482000 KHz @ 4 
KHz), (N/A, 2000 mBm), (N/A)
  Aug 23 15:13:21 spiny kernel: cfg80211:   (2474000 KHz - 2494000 KHz @ 2 
KHz), (N/A, 2000 mBm), (N/A)
  Aug 23 15:13:21 spiny kernel: cfg80211:   (517 KHz - 525 KHz @ 8 
KHz, 16 KHz AUTO), (N/A, 2000 mBm), (N/A)
  Aug 23 15:13:21 spiny kernel: cfg80211:   (525 KHz - 533 KHz @ 8 
KHz, 16 KHz AUTO), (N/A, 2000 mBm), (0 s)
  Aug 23 15:13:21 spiny kernel: cfg80211:   (549 KHz - 573 KHz @ 16 
KHz), (N/A, 2000 mBm), (0 s)
  Aug 23 15:13:21 spiny kernel: cfg80211:   

[Kernel-packages] [Bug 1487662] Re: cciss driver crashes kernel during boot with wily kernel

[aenertia]

Which build do you want me to test ?

v4.2-rc7-unstable/

?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1487662

Title:
  cciss driver crashes kernel during boot with wily kernel

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  On a HP Proliant was running trusty with vivid kernel from backports
  originally. Worked fine with userspace upgrade to wily. When I
  rebooted with the wily linux-generic kernel however I got a stack
  dump:

  SW Raid1 on two CCISS based RAID0 disks, and dm_crypt. Kernel boots to
  prompt for cyrptoroot passphrase. After entering it and mounting
  entering the dm mapper init sequence the kernel crashes. I have a
  dropbear instance installed running from initramfs (for remote
  unlocking of root) and this is still runs.

  dmesg attached from server.
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Aug 22 00:52 seq
   crw-rw 1 root audio 116, 33 Aug 22 00:52 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.18-0ubuntu7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  DistroRelease: Ubuntu 15.10
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=/dev/mapper/vg0-swap
  MachineType: HP ProLiant BL460c G1
  Package: linux (not installed)
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-26-generic 
root=/dev/mapper/vg0-root ro quiet nomdmonddf nomdmonisw
  ProcVersionSignature: Ubuntu 3.19.0-26.28~14.04.1-generic 3.19.8-ckt4
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-26-generic N/A
   linux-backports-modules-3.19.0-26-generic  N/A
   linux-firmware 1.146
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  wily uec-images
  Uname: Linux 3.19.0-26-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 05/02/2011
  dmi.bios.vendor: HP
  dmi.bios.version: I15
  dmi.chassis.type: 23
  dmi.chassis.vendor: HP
  dmi.modalias: 
dmi:bvnHP:bvrI15:bd05/02/2011:svnHP:pnProLiantBL460cG1:pvr:cvnHP:ct23:cvr:
  dmi.product.name: ProLiant BL460c G1
  dmi.sys.vendor: HP

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1487662/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Kernel-packages] [Bug 1436940] Re: Atheros wifi 168c:0041(QCA6164) is not supported

[marc matthes]

Would these directions work for a Lenovo G50-45 running Cent os 7.

Sent from my android device.

-Original Message-
From: Diego <1436...@bugs.launchpad.net>
To: marc.matt...@mchsi.com
Sent: Sun, 23 Aug 2015 3:53 PM
Subject: [Bug 1436940] Re: Atheros wifi 168c:0041(QCA6164) is not supported

Hi,

glad is working! I guess I will have to be extra careful when upgrading
my kernel now. Thanks for letting me know that :).

Hopefully support will be added to newer kernels though :).

Best,
Diego

-- 
You received this bug notification because you are subscribed to the bug
report.
https://bugs.launchpad.net/bugs/1436940

Title:
  Atheros wifi 168c:0041(QCA6164) is not supported

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Vivid:
  Confirmed
Status in linux source package in Wily:
  Confirmed

Bug description:
  The atheros wireless device (168c:0041) isn't supported by the
  ath10k_pci kernel driver.

  Found in several laptop models:

  Lenovo Z70
  Lenovo G50-45
  Lenovo G50-80
  Lenovo Edge 15
  Lenovo Yoga 3 11
  Lenovo Flex 3-1470
  Samsung ATIV Book 9 NP930X2K

  ProblemType: BugDistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-9-generic 3.19.0-9.9
  ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1
  Uname: Linux 3.19.0-9-generic x86_64
  ApportVersion: 2.16.2-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nicholas   1695 F pulseaudio
   /dev/snd/controlC1:  nicholas   1695 F pulseaudio
  CurrentDesktop: Unity
  Date: Thu Mar 26 09:47:16 2015
  HibernationDevice: RESUME=UUID=5b068cd8-e60a-49b9-a88e-1581bb6b3dc1
  InstallationDate: Installed on 2015-03-25 (1 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 004: ID 0cf3:e300 Atheros Communications, Inc.
   Bus 001 Device 003: ID 5986:0652 Acer, Inc
   Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card 
Reader Controller
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: LENOVO 80E5
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-9-generic 
root=UUID=e52867c5-0b50-42fb-8288-f30765f926c5 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-9-generic N/A
   linux-backports-modules-3.19.0-9-generic  N/A
   linux-firmware1.143SourcePackage: linux
  UpgradeStatus: Upgraded to vivid on 2015-03-26 (0 days ago)
  dmi.bios.date: 06/20/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: B0CN69WW
  dmi.board.asset.tag: NO Asset Tag
  dmi.board.name: Lenovo G50-80
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058 WIN
  dmi.chassis.asset.tag: NO Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo G50-80
  dmi.modalias: 
dmi:bvnLENOVO:bvrB0CN69WW:bd06/20/2014:svnLENOVO:pn80E5:pvrLenovoG50-80:rvnLENOVO:rnLenovoG50-80:rvr31900058WIN:cvnLENOVO:ct10:cvrLenovoG50-80:
  dmi.product.name: 80E5
  dmi.product.version: Lenovo G50-80
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1436940/+subscriptions

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1436940

Title:
  Atheros wifi 168c:0041(QCA6164) is not supported

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Vivid:
  Confirmed
Status in linux source package in Wily:
  Confirmed

Bug description:
  The atheros wireless device (168c:0041) isn't supported by the
  ath10k_pci kernel driver.

  Found in several laptop models:

  Lenovo Z70
  Lenovo G50-45
  Lenovo G50-80
  Lenovo Edge 15
  Lenovo Yoga 3 11
  Lenovo Flex 3-1470
  Samsung ATIV Book 9 NP930X2K

  ProblemType: BugDistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-9-generic 3.19.0-9.9
  ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1
  Uname: Linux 3.19.0-9-generic x86_64
  ApportVersion: 2.16.2-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nicholas   1695 F pulseaudio
   /dev/snd/controlC1:  nicholas   1695 F pulseaudio
  CurrentDesktop: Unity
  Date: Thu Mar 26 09:47:16 2015
  HibernationDevice: RESUME=UUID=5b068cd8-e60a-49b9-a88e-1581bb6b3dc1
  InstallationDate: Installed on 2015-03-25 (1 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 004: ID 0cf3:e300 Atheros Communications, Inc.
   Bus 001 Device 003: ID 5986:0652 Ac

[Kernel-packages] [Bug 1477593] Re: nvidia-340-updates 340.76-0ubuntu2: nvidia-340-updates kernel module failed to build [FATAL: modpost: GPL-incompatible module nvidia.ko uses GPL-only symbol 'flush_

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: bcmwl (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1477593

Title:
  nvidia-340-updates 340.76-0ubuntu2: nvidia-340-updates kernel module
  failed to build [FATAL: modpost: GPL-incompatible module nvidia.ko
  uses GPL-only symbol 'flush_workqueue']

Status in bcmwl package in Ubuntu:
  Confirmed
Status in nvidia-graphics-drivers-340 package in Ubuntu:
  Confirmed
Status in nvidia-graphics-drivers-340-updates package in Ubuntu:
  Confirmed
Status in nvidia-graphics-drivers-346-updates package in Ubuntu:
  Confirmed

Bug description:
  Dont build modules nvidia for kernel 4.2.*

  ProblemType: Package
  DistroRelease: Ubuntu 15.04
  Package: nvidia-340-updates 340.76-0ubuntu2 [modified: 
usr/src/nvidia-340-updates-340.76/nv-pat.c]
  Uname: Linux 4.1.2-040102-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  DKMSKernelVersion: 4.2.0-040200rc3-generic
  Date: Thu Jul 23 16:46:29 2015
  InstallationDate: Installed on 2015-05-25 (58 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  PackageVersion: 340.76-0ubuntu2
  RelatedPackageVersions:
   dpkg 1.17.25ubuntu1
   apt  1.0.9.7ubuntu4
  SourcePackage: nvidia-graphics-drivers-340-updates
  Title: nvidia-340-updates 340.76-0ubuntu2: nvidia-340-updates kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1477593/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1487700] Re: bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4: bcmwl kernel module failed to build

[Daniel van Vugt]

*** This bug is a duplicate of bug 1481662 ***
https://bugs.launchpad.net/bugs/1481662

Thank you for taking the time to report this bug and helping to make
Ubuntu better. This particular bug has already been reported and is a
duplicate of bug 1481662, so it is being marked as such. Please look at
the other bug report to see if there is any missing information that you
can provide, or to see if there is a workaround for the bug.
Additionally, any further discussion regarding the bug should occur in
the other report. Feel free to continue to report any other bugs you may
find.


** This bug has been marked a duplicate of bug 1481662
   bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4: bcmwl kernel module failed 
to build [FATAL: modpost: GPL-incompatible module wl.ko uses GPL-only symbol 
'flush_workqueue']

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1487700

Title:
  bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4: bcmwl kernel module
  failed to build

Status in bcmwl package in Ubuntu:
  Confirmed

Bug description:
  bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4: bcmwl kernel module
  failed to build

  ProblemType: Package
  DistroRelease: Ubuntu 15.10
  Package: bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4
  Uname: Linux 4.1.6-040106-generic i686
  NonfreeKernelModules: wl
  ApportVersion: 2.18-0ubuntu7
  Architecture: i386
  DKMSKernelVersion: 4.2.0-040200rc7-generic
  Date: Sat Aug 22 14:50:12 2015
  InstallationDate: Installed on 2015-06-02 (81 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Alpha i386 (20150601)
  PackageVersion: 6.30.223.248+bdcom-0ubuntu4
  RelatedPackageVersions:
   dpkg 1.18.2ubuntu1
   apt  1.0.9.10ubuntu6
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1487700/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1481662] Re: bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4: bcmwl kernel module failed to build [FATAL: modpost: GPL-incompatible module wl.ko uses GPL-only symbol 'flush_work

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: bcmwl (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1481662

Title:
  bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4: bcmwl kernel module
  failed to build [FATAL: modpost: GPL-incompatible module wl.ko uses
  GPL-only symbol 'flush_workqueue']

Status in bcmwl package in Ubuntu:
  Confirmed

Bug description:
  bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4: bcmwl kernel module
  failed to build

  ProblemType: Package
  DistroRelease: Ubuntu 15.10
  Package: bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4
  Uname: Linux 4.1.4-040104-generic i686
  NonfreeKernelModules: wl
  ApportVersion: 2.18-0ubuntu5
  Architecture: i386
  DKMSKernelVersion: 4.2.0-040200rc5-generic
  Date: Wed Aug  5 12:12:36 2015
  InstallationDate: Installed on 2015-06-02 (64 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Alpha i386 (20150601)
  PackageVersion: 6.30.223.248+bdcom-0ubuntu4
  RelatedPackageVersions:
   dpkg 1.18.1ubuntu1
   apt  1.0.9.10ubuntu1
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.30.223.248+bdcom-0ubuntu4: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1481662/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1475166] Re: Ubuntu 15.04 Install Error with Avago Controller

[Johnny Chang]

Hi Bryan,

We have done bisection, and found the first bad commit is "34b48db" as shown 
below.
With this bad commit, the filesystem returns I/O error while copying files to 
disk.

We use the same config file copy from ubuntu 14.10, and follow the build 
instruction[1].
Would you like to build an install-able ISO image with reverting this commit? 
And then we can verify if the installation issue can be solved.

[1]
https://wiki.ubuntu.com/KernelTeam/GitKernelBuild#Kernel_Build_and_Installation

commit 34b48db66e08ca1c1bc07cf305d672ac940268dc
Author: Christoph Hellwig 
Date:   Sat Sep 6 16:08:05 2014 -0700
block: remove artifical max_hw_sectors cap
Set max_sectors to the value the drivers provides as hardware limit by
default.  Linux had proper I/O throttling for a long time and doesn't
rely on a artifically small maximum I/O size anymore.  By not limiting
the I/O size by default we remove an annoying tuning step required for
most Linux installation.
Note that both the user, and if absolutely required the driver can still
impose a limit for FS requests below max_hw_sectors_kb.
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe 
diff --git a/block/blk-settings.c b/block/blk-settings.c
index aa02247..6ed2cbe 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -257,9 +257,7 @@ void blk_limits_max_hw_sectors(struct queue_limits *limits, 
unsigned int max_hw_
   __func__, max_hw_sectors);
}
-   limits->max_hw_sectors = max_hw_sectors;
-   limits->max_sectors = min_t(unsigned int, max_hw_sectors,
-   BLK_DEF_MAX_SECTORS);
+   limits->max_sectors = limits->max_hw_sectors = max_hw_sectors;
 }
 EXPORT_SYMBOL(blk_limits_max_hw_sectors);
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
index dd73e1f..46c282f 100644
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -395,7 +395,7 @@ aoeblk_gdalloc(void *vp)
WARN_ON(d->flags & DEVFL_TKILL);
WARN_ON(d->gd);
WARN_ON(d->flags & DEVFL_UP);
-   blk_queue_max_hw_sectors(q, BLK_DEF_MAX_SECTORS);
+   blk_queue_max_hw_sectors(q, 1024);
q->backing_dev_info.name = "aoe";
q->backing_dev_info.ra_pages = READ_AHEAD / PAGE_CACHE_SIZE;
d->bufpool = mp;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 0207a78..74d14db 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1186,7 +1186,6 @@ extern int blk_verify_command(unsigned char *cmd, fmode_t 
has_write_perm);
 enum blk_default_limits {
BLK_MAX_SEGMENTS= 128,
BLK_SAFE_MAX_SECTORS= 255,
-   BLK_DEF_MAX_SECTORS = 1024,
BLK_MAX_SEGMENT_SIZE= 65536,
BLK_SEG_BOUNDARY_MASK   = 0xUL,
 };

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1475166

Title:
  Ubuntu 15.04 Install Error with Avago Controller

Status in linux package in Ubuntu:
  Triaged

Bug description:
  Hello Canonical Team

  We are running to an issue installing ubuntu PPC64LE 15.04 full blown
  image on our servers  (with RAID controller).  Installation hangs
  around 70% of progress.

  An important part of our configuration is Avago RAID controller:
  9361-8i Firmware version we used is 4.300.00-4429, and the package is
  24.10.0-0002.

  IMPORTANT: It has to be noted that with same hardware configuration
  14.10 full blown image installs fine.

  Dmesg logs are attached:

  Looking at dmesg logs point out that:
  LSI (avago) driver loads fine
  During further interaction with raid volume during the installation process, 
firmware errors are seen 
  [  196.991417] megasas: FW status 0x3

  [  196.999376] megasas: FW status 0x3

  [  197.007376] megasas: FW status 0x3
  Further down the  process I/O errors are thrown
  [  217.438664] Buffer I/O error on device sda2, logical block 22052864

  [  217.438671] Buffer I/O error on device sda2, logical block 22052865

  [  217.438678] Buffer I/O error on device sda2, logical block 22052866

  [  217.438686] Buffer I/O error on device sda2, logical block 22052867

  Full dmesg log is attached. Snippet is pasted below highlighting:

  It can be noted that there’s a Mellanox Connectx 3 pro card with some test 
Firmware on our setup. 
  We can Ignore any diagnostic messages from that card in dmesg logs for the 
purpose of this bug. 

  Thanks
  Adi Gangidi

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1475166/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1383184] Re: Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] is not supported

[nicobrainless]

Thank you!
On Elementary OS Freya, installing the ath10k package from post #258 I think, 
and upgrading the kernel to linux-generic-lts-vivid (3.19) fixed it :)
Now the touchpad...

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1383184

Title:
  Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] is not supported

Status in HWE Next:
  Triaged
Status in linux package in Ubuntu:
  Triaged
Status in linux-firmware package in Ubuntu:
  Triaged

Bug description:
  Card detail: Qualcomm Atheros Device [168c:003e] (rev 20)
  Subsystem: Bigfoot Networks, Inc. Device [1a56:1525]

  This is on a fully updated Ubuntu Server 14.04 installation, with the 
ubuntu-desktop environment installed. This happened in order to get the md raid 
drivers for raid0 on my system, as the desktop version doesn't support them.
  ---
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  matanis2333 F pulseaudio
   /dev/snd/controlC0:  matanis2333 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=1b192ee3-f592-43e9-bdcf-08b91c0aa9b6
  InstallationDate: Installed on 2014-10-16 (3 days ago)
  InstallationMedia: Ubuntu-Server 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.3)
  IwConfig:
   p2p1  no wireless extensions.

   lono wireless extensions.
  MachineType: Micro-Star International Co., Ltd. GT72 2QE
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcFB: 0 EFI VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic.efi.signed 
root=UUID=80998dbb-1f89-4eda-be90-25e35e1c0a90 ro
  ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-37-generic N/A
   linux-backports-modules-3.13.0-37-generic  N/A
   linux-firmware 1.127.7
  RfKill:

  Tags:  trusty
  Uname: Linux 3.13.0-37-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 09/15/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: E1781IMS.10D
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MS-1781
  dmi.board.vendor: Micro-Star International Co., Ltd.
  dmi.board.version: REV:0.C
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrE1781IMS.10D:bd09/15/2014:svnMicro-StarInternationalCo.,Ltd.:pnGT722QE:pvrREV0.C:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1781:rvrREV0.C:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: GT72 2QE
  dmi.product.version: REV:0.C
  dmi.sys.vendor: Micro-Star International Co., Ltd.

  Qualcomm Atheros Device [168c:003e] (rev 20)

  mainline commit d63955b33b3bee45d784ffdfafeb93076c765660

  [6.221281] ath10k_pci :02:00.0: pci irq msi interrupts 1 irq_mode 0 
reset_mode 0
  [6.417386] ath10k_pci :02:00.0: Direct firmware load for 
ath10k/cal-pci-:02:00.0.bin failed with error -2
  [6.417404] ath10k_pci :02:00.0: Direct firmware load for 
ath10k/QCA6174/hw2.1/board-pci-168c:003e:17aa:3044.bin failed with error -2
  [6.417407] ath10k_pci :02:00.0: failed to load spec board file, 
falling back to generic: -2
  [6.417416] ath10k_pci :02:00.0: Direct firmware load for 
ath10k/QCA6174/hw2.1/board.bin failed with error -2
  [6.417418] ath10k_pci :02:00.0: failed to fetch generic board data: -2
  [6.417420] ath10k_pci :02:00.0: failed to fetch board file: -2
  [6.417421] ath10k_pci :02:00.0: could not fetch firmware files (-2)
  [6.417423] ath10k_pci :02:00.0: could not probe fw (-2)

  failed to find it in https://github.com/kvalo/ath10k-firmware or
  https://github.com/sumdog/ath10k-firmware

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1383184/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1468409] Re: package linux-image-3.13.0-53-generic (not installed) failed to install/upgrade: il sottoprocesso nuovo script pre-installation ha restituito lo stato di errore 1

[Launchpad Bug Tracker]

[Expired for linux (Ubuntu) because there has been no activity for 60
days.]

** Changed in: linux (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1468409

Title:
  package linux-image-3.13.0-53-generic (not installed) failed to
  install/upgrade: il sottoprocesso nuovo script pre-installation ha
  restituito lo stato di errore 1

Status in linux package in Ubuntu:
  Expired

Bug description:
  Ubuntu 3.13.0-24.46-generic 3.13.9

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-53-generic (not installed)
  ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9
  Uname: Linux 3.13.0-24-generic i686
  ApportVersion: 2.14.1-0ubuntu3.11
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  mohammad   1345 F lxpanel
  CRDA: Error: [Errno 2] File o directory non esistente: 'iw'
  CurrentDmesg:
   [   26.013530] init: plymouth-upstart-bridge main process ended, respawning
   [   36.408059] ipw2200: Failed to send POWER_MODE: Command timed out.
  Date: Wed Jun 24 17:18:21 2015
  DpkgHistoryLog:
   Start-Date: 2015-06-24  17:17:05
   Commandline: apt-get install -f
   Install: linux-image-3.13.0-53-generic:i386 (3.13.0-53.89, automatic), 
linux-headers-3.13.0-55-generic:i386 (3.13.0-55.94, automatic), 
linux-image-3.13.0-55-generic:i386 (3.13.0-55.94, automatic), 
linux-image-extra-3.13.0-55-generic:i386 (3.13.0-55.94, automatic), 
linux-headers-3.13.0-55:i386 (3.13.0-55.94, automatic)
   Upgrade: linux-generic:i386 (3.13.0.53.60, 3.13.0.55.62), 
linux-image-generic:i386 (3.13.0.53.60, 3.13.0.55.62), 
linux-headers-generic:i386 (3.13.0.53.60, 3.13.0.55.62)
  DuplicateSignature: package:linux-image-3.13.0-53-generic:(not installed):il 
sottoprocesso nuovo script pre-installation ha restituito lo stato di errore 1
  ErrorMessage: il sottoprocesso nuovo script pre-installation ha restituito lo 
stato di errore 1
  HibernationDevice: RESUME=UUID=da8f4b89-e26f-45d4-be4e-2d6847ab6a51
  InstallationDate: Installed on 2015-05-21 (33 days ago)
  InstallationMedia: Lubuntu 14.04 LTS "Trusty Tahr" - Release i386 (20140416.2)
  MachineType: Hewlett-Packard Pavilion zt3200 (PB563EA#ABZ)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic 
root=UUID=09b1bd09-0a44-4443-ac3d-1c9405293fe0 ro quiet splash vt.handoff=7
  RelatedPackageVersions: grub-pc 2.02~beta2-9ubuntu1.1
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
  SourcePackage: linux
  Title: package linux-image-3.13.0-53-generic (not installed) failed to 
install/upgrade: il sottoprocesso nuovo script pre-installation ha restituito 
lo stato di errore 1
  UpgradeStatus: No upgrade log present (probably fresh install)
  WifiSyslog:
   
  dmi.bios.date: 07/14/2005
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 68BAL Ver. F.55
  dmi.board.name: 0860
  dmi.board.vendor: COMPAL
  dmi.board.version: 8051 Version 24.56
  dmi.chassis.type: 10
  dmi.chassis.vendor: COMPAL
  dmi.chassis.version: NULL
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr68BALVer.F.55:bd07/14/2005:svnHewlett-Packard:pnPavilionzt3200(PB563EA#ABZ):pvrF.55:rvnCOMPAL:rn0860:rvr8051Version24.56:cvnCOMPAL:ct10:cvrNULL:
  dmi.product.name: Pavilion zt3200 (PB563EA#ABZ)
  dmi.product.version: F.55
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1468409/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1467891] Re: Touchpad is not detected/working

[Launchpad Bug Tracker]

[Expired for linux (Ubuntu) because there has been no activity for 60
days.]

** Changed in: linux (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1467891

Title:
  Touchpad is not detected/working

Status in linux package in Ubuntu:
  Expired

Bug description:
  This is permanent and not only after login. The touchpad does not seem
  to be detected.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-21-generic 3.19.0-21.21
  ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8
  Uname: Linux 3.19.0-21-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  elie   3476 F pulseaudio
   /dev/snd/controlC0:  elie   3476 F pulseaudio
  CurrentDesktop: Unity
  Date: Tue Jun 23 13:36:06 2015
  DistributionChannelDescriptor:
   # This is a distribution channel descriptor
   # For more information see 
http://wiki.ubuntu.com/DistributionChannelDescriptor
   canonical-oem-stella-daan2-precise-amd64-20140502-1
  InstallationDate: Installed on 2015-05-22 (31 days ago)
  InstallationMedia: Ubuntu 12.04 "Precise" - Failed to find casper uuid.conf 
in 'binary/casper/initrd.img-3.11.0-18-generic.old-dkms' LIVE Binary 
20140502-06:48
  MachineType: LENOVO 20354
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-21-generic 
root=UUID=5de5eca8-122b-4a64-b61a-b26fbbf3d425 ro quiet splash 
usbcore.autosuspend=-1
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-21-generic N/A
   linux-backports-modules-3.19.0-21-generic  N/A
   linux-firmware 1.143.1
  SourcePackage: linux
  UpgradeStatus: Upgraded to vivid on 2015-05-31 (22 days ago)
  dmi.bios.date: 10/20/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 9BCN29WW
  dmi.board.asset.tag: No Asset Tag
  dmi.board.name: Lancer 5A5
  dmi.board.vendor: LENOVO
  dmi.board.version: NANANANANO DPK
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo Z50-70
  dmi.modalias: 
dmi:bvnLENOVO:bvr9BCN29WW:bd10/20/2014:svnLENOVO:pn20354:pvrLenovoZ50-70:rvnLENOVO:rnLancer5A5:rvrNANANANANODPK:cvnLENOVO:ct10:cvrLenovoZ50-70:
  dmi.product.name: 20354
  dmi.product.version: Lenovo Z50-70
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1467891/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1465808] Re: Hibernation fails due to a non-reachable cifs mount

[Launchpad Bug Tracker]

[Expired for linux (Ubuntu) because there has been no activity for 60
days.]

** Changed in: linux (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1465808

Title:
  Hibernation fails due to a non-reachable cifs mount

Status in linux package in Ubuntu:
  Expired

Bug description:
  This happened twice during the last weeks with different kernel
  versions on Kubuntu 15.04 (latest kernel images released). Steps
  taken:

  1) Mount cifs: sudo mount -t cifs -ouser=admin //x.y.z.a/video 
/home/packi/video/
  2) Watch movies (VLC startet using dolphin)
  3) Hibernate
  4) Wake-up at work (server no longer reachable)
  5) Try to hibernate at work after 9 hours

  Output of dmesg:

  [224051.133206] PM: Syncing filesystems ... done.
  [224051.174400] PM: Preparing system for freeze sleep
  [224051.174567] Freezing user space processes ...
  [224071.207476] Freezing of tasks failed after 20.008 seconds (1 tasks 
refusing to freeze, wq_busy=0):
  [224071.207529] dolphin D 880320a0b968 0 31153   1787 
0x0004
  [224071.207532]  880320a0b968 8802799a93a0 00014200 
880320a0bfd8
  [224071.207534]  00014200 88046c2d93a0 8802799a93a0 
20a0b948
  [224071.207536]  8800648c79b8 8800648c79bc 8802799a93a0 

  [224071.207538] Call Trace:
  [224071.207545]  [] schedule_preempt_disabled+0x29/0x70
  [224071.207548]  [] __mutex_lock_slowpath+0x95/0x100
  [224071.207550]  [] mutex_lock+0x23/0x40
  [224071.207566]  [] SendReceive+0x90/0x310 [cifs]
  [224071.207570]  [] ? smb_init+0x45/0x60 [cifs]
  [224071.207575]  [] CIFSSMBNegotiate+0x114/0x6c0 [cifs]
  [224071.207583]  [] cifs_negotiate+0x43/0x60 [cifs]
  [224071.207589]  [] cifs_negotiate_protocol+0x7f/0xe0 [cifs]
  [224071.207593]  [] cifs_reconnect_tcon+0xb2/0x320 [cifs]
  [224071.207598]  [] smb_init+0x2e/0x60 [cifs]
  [224071.207603]  [] CIFSSMBUnixQPathInfo+0x7a/0x300 [cifs]
  [224071.207609]  [] cifs_get_inode_info_unix+0x86/0x200 
[cifs]
  [224071.207614]  [] ? complete_walk+0x51/0x100
  [224071.207616]  [] ? path_lookupat+0x60/0xc90
  [224071.207619]  [] ? __kmalloc+0x1c9/0x280
  [224071.207624]  [] ? build_path_from_dentry+0xb6/0x2c0 
[cifs]
  [224071.207629]  [] ? build_path_from_dentry+0xb6/0x2c0 
[cifs]
  [224071.207635]  [] cifs_revalidate_dentry_attr+0xbc/0x200 
[cifs]
  [224071.207641]  [] cifs_getattr+0x55/0x130 [cifs]
  [224071.207643]  [] vfs_getattr_nosec+0x2c/0x40
  [224071.207644]  [] vfs_getattr+0x2d/0x40
  [224071.207646]  [] vfs_fstatat+0x64/0xa0
  [224071.207647]  [] SYSC_newlstat+0x22/0x40
  [224071.207649]  [] SyS_newlstat+0xe/0x10
  [224071.207652]  [] system_call_fastpath+0x16/0x1b

  The task in question is hanging and can't be killed by -KILL or -TERM. I also 
couldn't umount the mount using 'umount -f'.
  --- 
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  packi  2227 F pulseaudio
   /dev/snd/controlC0:  packi  2227 F pulseaudio
  CurrentDesktop: KDE
  DistroRelease: Ubuntu 15.04
  HibernationDevice: RESUME=UUID=21b20ba3-e090-4787-a27a-ccffdd11dd21
  InstallationDate: Installed on 2015-05-07 (40 days ago)
  InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  MachineType: LENOVO 20EFCTO1WW
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-21-generic 
root=/dev/mapper/kubuntu--vg-root ro quiet splash
  ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-21-generic N/A
   linux-backports-modules-3.19.0-21-generic  N/A
   linux-firmware 1.143.1
  Tags:  vivid
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  Uname: Linux 3.19.0-21-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 02/26/2015
  dmi.bios.vendor: LENOVO
  dmi.bios.version: GNET72WW (2.20 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20EFCTO1WW
  dmi.board.vendor: LENOVO
  dmi.board.version: SDK0E50510 WIN
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrGNET72WW(2.20):bd02/26/2015:svnLENOVO:pn20EFCTO1WW:pvrThinkPadW541:rvnLENOVO:rn20EFCTO1WW:rvrSDK0E50510WIN:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 20EFCTO1WW
  dmi.product.version: ThinkPad W541
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1465808/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.l

[Kernel-packages] [Bug 1467376] Re: Stuttering looping sound when not touching mouse/keyboard

[Launchpad Bug Tracker]

[Expired for linux (Ubuntu) because there has been no activity for 60
days.]

** Changed in: linux (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1467376

Title:
  Stuttering looping sound when not touching mouse/keyboard

Status in linux package in Ubuntu:
  Expired

Bug description:
  When not touching mouse and keyboard audio stuttering appears.
  Stuttering appears when CPU load become slow down. In task manager i
  have seen normal cpu load approx 20-30 % and 3% when audio stuttering
  comes. When did not touch keyboard and mouse audio stuttering appears
  at 4 or 8 or 2 sec. and continues 4 - 5 sec. and this effect looping.
  I have tried kernells: 3.19.0-15; 3.19.0-21; 4.1.0-040100rc8.

  Sound cards recognized by the system:
  00:07.0 Audio device [0403]: NVIDIA Corporation MCP72XE/MCP72P/MCP78U/MCP78S 
High Definition Audio [10de:0774] (rev a1)
  Sound cards recognized by ALSA:
  00:07.0 Audio device [0403]: NVIDIA Corporation MCP72XE/MCP72P/MCP78U/MCP78S 
High Definition Audio [10de:0774] (rev a1)
  Sound cards recognized by ALSA, and activated:
  00:07.0 Audio device [0403]: NVIDIA Corporation MCP72XE/MCP72P/MCP78U/MCP78S 
High Definition Audio [10de:0774] (rev a1)

  00-00: ALC662 rev1 Analog : ALC662 rev1 Analog : playback 1 : capture 1
  00-01: ALC662 rev1 Digital : ALC662 rev1 Digital : playback 1
  00-02: ALC662 rev1 Alt Analog : ALC662 rev1 Alt Analog : capture 1
  00-03: HDMI 0 : HDMI 0 : playback 1
 
  alsactl version 1.0.29 or 1.0.28 - same effect.

  3.19.0-21-generic #21-Ubuntu SMP Sun Jun 14 18:31:11 UTC 2015 x86_64
  x86_64 x86_64 GNU/Linux

  dmesg --level=err,warn: http://paste.debian.net/250409/
  lspci   http://paste.debian.net/250778/
  lspci -vhttp://paste.debian.net/250779/
  --- 
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  DistroRelease: Ubuntu 15.04
  InstallationDate: Installed on 2015-06-21 (1 days ago)
  InstallationMedia: Lubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  Package: linux (not installed)
  Tags:  vivid
  Uname: Linux 4.1.0-040100rc8-generic x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1467376/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1393575] Re: efibootmgr gives an Oops

[Launchpad Bug Tracker]

[Expired for linux (Ubuntu) because there has been no activity for 60
days.]

** Changed in: linux (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1393575

Title:
  efibootmgr gives an Oops

Status in linux package in Ubuntu:
  Expired

Bug description:
  if you try to set the bootorder with a boot entry which is not displayed by 
efibootmgr but is shown in /sys/firmware/efi/efivars/Boo...
  you  get an Oops and the bootorder is reset.
  (Btw this seems the only way to boot from usb once you have installed linux 
in secureboot mode).

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: efibootmgr 0.5.4-7ubuntu1
  ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8
  Uname: Linux 3.13.0-39-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  CurrentDesktop: KDE
  Date: Mon Nov 17 22:55:03 2014
  InstallationDate: Installed on 2014-11-15 (2 days ago)
  InstallationMedia: Kubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  SourcePackage: efibootmgr
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1393575/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1487085] Comment bridged from LTC Bugzilla

[bugproxy]

--- Comment From mahesh.salgaon...@in.ibm.com 2015-08-24 06:19 EDT---
*** Bug 129349 has been marked as a duplicate of this bug. ***

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1487085

Title:
  Ubuntu 14.04.3 LTS Crash in notifier_call_chain after boot

Status in linux package in Ubuntu:
  New
Status in linux source package in Vivid:
  In Progress

Bug description:
  SRU Justification:
  [Impact]
  Users of 3.19 kernel with power8 machines get a kernel crash on boot.

  [Test Case]
  Boot system.

  [Fix]
  commit 792f96e9a769b799a2944e9369e4ea1e467135b2 needed to be backported in 
addition to d7cf83fcaf1b1668201eae4cdd6e6fe7a2448654. Our 3.19 kernel had a 
partial backport of the first patch.

  --

  
  ---Problem Description---
  Installed Ubuntu 14.04.3 LTS on Palmetto and its crashing after booting to 
login.
  This happens every time I boot Ubuntu 14.04.3 LTS.  I've reinstalled Ubuntu 
and replaced the hard disk as well and re-installed.  Still crashing.

  ---uname output---
  Linux paul40 3.19.0-26-generic #28~14.04.1-Ubuntu SMP Wed Aug 12 14:10:52 UTC 
2015 ppc64le ppc64le ppc64le GNU/Linux

  Machine Type = Palmetto

  ---System Hang---
   Ubuntu OS crashes and cannot access host. Must reboot system

  ---Steps to Reproduce---
   Boot system

  Oops output:
   [   33.132376] Unable to handle kernel paging request for data at address 
0x200
  [   33.132565] Faulting instruction address: 0xc00dbc60
  [   33.133422] Oops: Kernel access of bad area, sig: 11 [#1]
  [   33.134410] SMP NR_CPUS=2048 NUMA PowerNV
  [   33.134478] Modules linked in: ast ttm drm_kms_helper joydev mac_hid 
drm hid_generic usbhid hid syscopyarea sysfillrect sysimgblt i2c_algo_bit 
ofpart cmdlinepart at24 uio_pdrv_genirq powernv_flash mtd ipmi_powernv 
powernv_rng opal_prd ipmi_msghandler uio uas usb_storage ahci libahci
  [   33.139112] CPU: 24 PID: 0 Comm: swapper/24 Not tainted 
3.19.0-26-generic #28~14.04.1-Ubuntu
  [   33.139943] task: c13cccb0 ti: c00fff70 task.ti: 
c1448000
  [   33.141642] NIP: c00dbc60 LR: c00dbd94 CTR: 

  [   33.142605] REGS: c00fff703980 TRAP: 0300   Not tainted  
(3.19.0-26-generic)
  [   33.143417] MSR: 90009033   CR: 
28002888  XER: 
  [   33.144244] CFAR: c0008468 DAR: 0200 DSISR: 
4000 SOFTE: 0
  GPR00: c00dbd94 c00fff703c00 c144cc00 c15f03c0
  GPR04: 0007 c15f03b8  
  GPR08:  0200 c006c394 90001003
  GPR12: 2200 cfb8d800 0058 
  GPR16: c1448000 c1448000 c1448080 c0e9a880
  GPR20: c1448080 0001 0002 0012
  GPR24: c00f1e432200   c15f03b8
  GPR28: 0007  c15f03c0 
  [   33.157013] NIP [c00dbc60] notifier_call_chain+0x70/0x100
  [   33.157818] LR [c00dbd94] atomic_notifier_call_chain+0x44/0x60
  [   33.162090] Call Trace:
  [   33.162845] [c00fff703c00] [0008] 0x8 (unreliable)
  [   33.163644] [c00fff703c50] [c00dbd94] 
atomic_notifier_call_chain+0x44/0x60
  [   33.164647] [c00fff703c90] [c006f2a8] 
opal_message_notify+0xa8/0x100
  [   33.165476] [c00fff703d00] [c00dbc88] 
notifier_call_chain+0x98/0x100
  [   33.167007] [c00fff703d50] [c00dbd94] 
atomic_notifier_call_chain+0x44/0x60
  [   33.167816] [c00fff703d90] [c006f654] 
opal_do_notifier.part.5+0x74/0xa0
  [   33.172166] [c00fff703dd0] [c006f6d8] 
opal_interrupt+0x58/0x70
  [   33.172997] [c00fff703e10] [c01273d0] 
handle_irq_event_percpu+0x90/0x2b0
  [   33.174507] [c00fff703ed0] [c0127658] 
handle_irq_event+0x68/0xd0
  [   33.175312] [c00fff703f00] [c012baf4] 
handle_fasteoi_irq+0xe4/0x240
  [   33.176124] [c00fff703f30] [c01265c8] 
generic_handle_irq+0x58/0x90
  [   33.176936] [c00fff703f60] [c0010f10] __do_irq+0x80/0x190
  [   33.182406] [c00fff703f90] [c002476c] call_do_irq+0x14/0x24
  [   33.183258] [c144ba30] [c00110c0] do_IRQ+0xa0/0x120
  [   33.184072] [c144ba90] [c00025d8] 
hardware_interrupt_common+0x158/0x180
  [   33.184907] --- interrupt: 501 at arch_local_irq_restore+0x5c/0x90
  [   33.184907] LR = arch_local_irq_restore+0x40/0x90
  [   33.186473] [c144bd80] [c00f2ae19808] 0xc00f2ae19808 
(unreliable)
  [   33.188024] [c144bda0] [c085d5d8] 
cpuidle_enter_st