[gentoo-user] NFS Server Tuning
Hello, I am running a x86 gentoo box as a nfs server. As a filesystem I am using XFS on a 3ware Raid system. The 3ware systems seems to be quite quick, although access via NFS seems to be very slow. Any ideas how I can improve speed ? I was expected a speed only limited by the 100 Mbit network. Now, the speed is so slow, that reading/writing at the same time is nearly impossible. Any ideas how to improve the speed ? hdparm on the gentoo box machine: backup3 ~ # hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 4108 MB in 2.00 seconds = 2054.34 MB/sec Timing buffered disk reads: 232 MB in 3.01 seconds = 77.09 MB/sec /etc/exports on the gentoo box: /mnt/backup/ 192.168.1.0/24 (rw,no_root_squash,async,no_subtree_check) I am not even able to run a bonnie benchmark on the client. It seems to hang while doing rewriting. Running bonnie on the nfs server gives a fast result. /etc/fstab on the client: 192.168.1.3:/mnt/backup /mnt/backup nfs rw,users,async 0 http://pastebin.com/m72ae9d47 Any ideas ? -- www.stonki.de:the more I see, the more I know... www.proftpd.de: Deutsche ProFTPD Dokumentation www.krename.net: Der Batch Renamer für KDE www.kbarcode.net: Die Barcode Solution für KDE -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Performance SRCU42X
Hello, I am using in a dual Xeon Server a SRCU42X SCSI RAID controller by Intel. Fully equipped with 12 SCSI drives. (two different RAID5 drives). But I am fighting with a very poor performance. When copying large files (2GB) from one directory to another I am getting 13MB/seconds. master ~ # uname -a Linux master 2.6.22-gentoo-r9 #7 SMP Sun Nov 25 16:35:34 CET 2007 i686 Intel(R) Xeon(TM) CPU 3.06GHz GenuineIntel GNU/Linux I am using the Megaraid kernel drivers. master ~ # grep -i mega /usr/src/linux/.config CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=y CONFIG_MEGARAID_MAILBOX=y master ~ # lspci -v 04:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 02) Subsystem: Intel Corporation MegaRAID Intel RAID Controller SRCU42X Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 20 Memory at ff6f (32-bit, prefetchable) [size=64K] Memory at fe78 (32-bit, non-prefetchable) [size=512K] Expansion ROM at fe76 [disabled] [size=128K] Capabilities: [c0] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable- Capabilities: [e0] PCI-X non-bridge device Also I can't use the webconsole of Intel. Not sure, if it's expecting the kernel driver as a module. When starting the webconsole and accessing it via http://IP:3570/ I am getting: "No Raid Servers available" Any ideas ? Thanks Stonki -- www.stonki.de:the more I see, the more I know... www.proftpd.de: Deutsche ProFTPD Dokumentation www.krename.net: Der Batch Renamer für KDE www.kbarcode.net: Die Barcode Solution für KDE -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Performance SRCU42X
some more debug infos: http://pastebin.com/m34c6386d -- www.stonki.de:the more I see, the more I know... www.proftpd.de: Deutsche ProFTPD Dokumentation www.krename.net: Der Batch Renamer für KDE www.kbarcode.net: Die Barcode Solution für KDE -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Looking for an old ebuild: courier-authlib 0.58
Hello, for updating an old system I am looking for courier-authlib 0.58 (which still has vpopmail support). Unfortutely I don't find any ebuilds for it. Can anyone help ? Stonki -- www.stonki.de:the more I see, the more I know... www.proftpd.de: Deutsche ProFTPD Dokumentation www.krename.net: Der Batch Renamer für KDE www.kbarcode.net: Die Barcode Solution für KDE
Re: [gentoo-user] Looking for an old ebuild: courier-authlib 0.58
Am Dienstag, 30. Dezember 2008 schrieb Justin: > http://sources.gentoo.org/viewcvs.py/gentoo-x86/net-libs/courier- >authlib/?hideattic=0 Thanks ! -- www.stonki.de:the more I see, the more I know... www.proftpd.de: Deutsche ProFTPD Dokumentation www.krename.net: Der Batch Renamer für KDE www.kbarcode.net: Die Barcode Solution für KDE
[gentoo-user] Useflags EXIM
Hello, anyone able to give me a detailled discription of exim ? [ebuild N] mail-mta/exim-4.67 USE="mailwrapper mysql pam perl ssl tcpd -X -dnsdb -domainkeys -dovecot-sasl -exiscan -exiscan-acl -gnutls -ipv6 -ldap -lmtp -mbox -mbx -nis -postgres -radius -sasl -spf -sqlite -srs -syslog" 1,600 kB Thanks. -- www.stonki.de:the more I see, the more I know... www.proftpd.de: Deutsche ProFTPD Dokumentation www.krename.net: Der Batch Renamer für KDE www.kbarcode.net: Die Barcode Solution für KDE -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Problem with yelp while doing --update world
Am Sonntag, 3. Juni 2007 schrieb John covici: > checking whether we have a gtk 2 gecko build... configure: error: > This program needs a gtk 2 gecko build -- www.stonki.de:the more I see, the more I know... www.proftpd.de: Deutsche ProFTPD Dokumentation www.krename.net: Der Batch Renamer für KDE www.kbarcode.net: Die Barcode Solution für KDE -- [EMAIL PROTECTED] mailing list
[gentoo-user] Help for ebuild needed: kpilot
Hello, I am using a Palm Tungsten T5 and due to major problems syncen the device I changed to pilot-link-0.12pre4 (and ebuild is in the bug database). Now I would like to "emerge" or compile the CVS Version of kpilot. I downloaded it from SVN but when I do not understand the ebuild of kpilot-3.5.0. Can someone give me an helping how HOW I can "emerge" an given bz2 file to compile the CVS Version of kpilot ? Thanks Stonki -- www.stonki.de:the more I see, the more I know... www.proftpd.de: Deutsche ProFTPD Dokumentation www.krename.net: Der Batch Renamer für KDE www.kbarcode.net: Die Barcode Solution für KDE -- gentoo-user@gentoo.org mailing list
[gentoo-user] Palm Tungsten T5 help needed
Hello,
I am fighting now for a very long time to get my Palm T5 sync under
Linux. Unfortunately without any success, so maybe someone can
point me into the right direction. Ok, here is my setup:
1) kernel
Linux stonki 2.6.13-gentoo-r5 #3 SMP Thu Jan 12 21:24:53 CET 2006
x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ AuthenticAMD
GNU/Linux
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_HOTPLUG=y
2) Udev
sys-fs/udev-070-r1
# PalmOne Tungsten T3
BUS="usb",SYSFS{serial}="12345467893ABC",NAME="pilot",OWNER="root",GROUP="tty",MODE="0660"
#
# This works for one user's Handspring Visor. Put the desired user
in the "usb" group.
KERNEL="ttyUSB[01]*", NAME="tts/USB%n", GROUP="usb", MODE="0660"
3) System
stonki portage # rc-update -s | grep hotplug
hotplug | boot
So, an up-to-date Kernel with Visor support, Udev is installed and
the hotplug daemon is running
--
4) I am now connecting the T5 to the computer without (!) pressing
anything !
stonki portage # udevinfo -p /sys/class/tty/ttyUSB3 -a
[...]
DRIVER=="visor"
[...]
SYSFS{product}=="palmOne Handheld"
SYSFS{serial}=="504E35424D35543556305848"
5) I am creating a new file in /etc/udev/rules.d
tonki rules.d # cat 10-udev.rules
# PalmOne Tungsten
BUS="usb",SYSFS{serial}="504E35424D35543556305848",NAME="pilot",OWNER="root",GROUP="tty",MODE="0660"
#
# This works for one user's Handspring Visor. Put the desired user
in the "usb" group.
KERNEL="ttyUSB[0123]*", NAME="tts/USB%n", GROUP="usb", MODE="0660"
6) am using the unstable pilot-link version (the stable did not work
for me as well), but still no success:
a) I am attaching the T5 without (!) pressing the sync button.
In /var/log/messages it says:
Jan 21 18:44:22 stonki visor 2-1:1.0: Handspring Visor / Palm OS
converter detected
Jan 21 18:44:22 stonki usb 2-1: Handspring Visor / Palm OS converter
now attached to ttyUSB2
Jan 21 18:44:22 stonki usb 2-1: Handspring Visor / Palm OS converter
now attached to ttyUSB3
b) a /dev/pilot gets created
stonki rules.d # ls -als /dev/pilot
0 crw-rw 1 root tty 188, 2 Jan 21 18:44 /dev/pilot
c) stonki rules.d # pilot-xfer -p /dev/pilot --list
Listening for incoming connection on /dev/pilot...
d) Pressing Hotsync
Jan 21 18:45:53 stonki visor 2-1:1.0: Handspring Visor / Palm OS
converter detected
Jan 21 18:45:53 stonki usb 2-1: Handspring Visor / Palm OS converter
now attached to ttyUSB4
Jan 21 18:45:53 stonki usb 2-1: Handspring Visor / Palm OS converter
now attached to ttyUSB5
WHY I am getting USB4 and USB5 ?
e) of course it does NOT work
any idea ?
Thanks Stonki
--
www.stonki.de:the more I see, the more I know...
www.proftpd.de: Deutsche ProFTPD Dokumentation
www.krename.net: Der Batch Renamer für KDE
www.kbarcode.net: Die Barcode Solution für KDE
--
gentoo-user@gentoo.org mailing list
[gentoo-user] Gentoo on P7010: very quiet sound
Hello, I installed last week on my Fijutsu Siemens P7010 Notebook Gentoo. The sound is working fine after manuelly amending the modules for ALSA, but its very very quiet. Even with alsamixer and kdemixer set to the top I hardly hear anything. Any idea how to solve this ? And a another question: Because the notebook doesn't have any volume adjuster: is there any chance to get the [FN] Keys to work ? Thanks Stonki -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo on P7010: very quiet sound
Hi, > I installed last week on my Fijutsu Siemens P7010 Notebook Gentoo. The > sound is working fine after manuelly amending the modules for ALSA, but > its very very quiet. Even with alsamixer and kdemixer set to the top I > hardly hear anything. Any idea how to solve this ? ignore me... ;:) 1) I found a setting in the bios 2) I used the "PCM" mixer in KDE and now its fine. cu stonki -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] One package is blocking another?
Hello, > software as normal, but was told that ftpbase-0.00 was blocking > proftpd-1.something. What, exactly, does this mean and what do I do about > it? I want to continue using Proftpd, and don't know what Ftpbase is. unmerge the old proftpd version, emerge the new proftpd version. For some reasons, this will now install "ftpbase" and "proftpd". The configs are not altered, so no worry. Works fine for me (I am running www.proftpd.de) cu stonki -- gentoo-user@gentoo.org mailing list
[gentoo-user] Gentoo, udev and Palm Tungsten T5
Hello, is anyone using a Palm Tungsten T5 under Gentoo and Udev ? I tried google up and down, read tons of docs and howtos, but I can get it to work. Any real life experience would be very helpful. cu stonki -- www.stonki.de www.krename.net www.kbarcode.net www.proftpd.de -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo, udev and Palm Tungsten T5
Am Freitag, 12. August 2005 08:35 schrieb Heinz Sporn: > Hi! > > Got a Tungsten E. Can't say that getting it run worked like a > charm. But now it works fine with Gnome / Evolution. are you using udev ? If so please email me your rules.d/*.conf.. It still not working :( very frustrating... -- www.stonki.de:the more I see, the more I know... www.proftpd.de: Deutsche ProFTPD Dokumentation www.krename.net: Der Batch Renamer für KDE www.kbarcode.net: Die Barcode Solution für KDE -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo, udev and Palm Tungsten T5
Am Freitag, 12. August 2005 04:58 schrieb Nick Rout:
> http://www.reactivated.net/writing_udev_rules.html
]...]
> 1. unlike many usb devices plugging a palm device in is
> insufficient to get the kernel and udev and hotlpug to do
> anything. you need to push the hotsync button.
>
> 2. you then get two devices (well on the treo anyway) - something
> like ttyUSB0 and ttyUSB1 - only one of them is any good, the odd
> one. They may not be in the top level of /dev, but in some
> subdirectory. find and the kernel logs are your friends.
well, I am using:
BUS="usb", SYSFS{serial}="504E35424D42583456354E35",
KERNEL="ttyUSB[1357]", SYMLINK="pilot"
some seconds after I am connecting the Palm (without pressing any
hotsync button !!! ) I am getting:
p7010 ~ # ls -als /dev/tts/USB*
0 crw-rw-rw- 1 root tty 188, 0 Aug 12 20:01 /dev/tts/USB0
0 crw-rw-rw- 1 root tty 188, 1 Aug 12 20:01 /dev/tts/USB1
p7010 ~ # ls -als /dev/pilot
0 lrwxrwxrwx 1 root root 8 Aug 12 20:01 /dev/pilot -> tts/USB1
but even now a test with the palm program stops here:
p7010 ~ # pilot-xfer --port /dev/pilot -L
Listening to port: /dev/pilot
Please press the HotSync button now...
the moment I am pressing the hotsync button, the device (/dev/pilot)
is disappearing for a second and will be created insteadly again:
resulting: Error read system info on /dev/pilot
kpilot is not able to connect at all :(
--
www.stonki.de:the more I see, the more I know...
www.proftpd.de: Deutsche ProFTPD Dokumentation
www.krename.net: Der Batch Renamer für KDE
www.kbarcode.net: Die Barcode Solution für KDE
--
gentoo-user@gentoo.org mailing list
[gentoo-user] DV Digicam Panasonic NV GS 150 and Gentoo
Hi, I am wondering if anyone got some experiences with accessing a digicam (see subject) under Linux. when I connect the camera to the firewire port of my notebook I see in /var/log/messages: Aug 13 20:15:20 p7010 ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting... Aug 13 20:15:21 p7010 ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[00804580114b7cec] Aug 13 20:15:21 p7010 ieee1394: Node changed: 0-00:1023 -> 0-01:1023 p7010 ~ # lsmod | grep 1394 video1394 18380 0 raw139427436 0 dv1394 19212 0 ohci1394 32500 2 video1394,dv1394 I have no idea how to continue from this point !? Any idea ? Thanks ! -- www.stonki.de:the more I see, the more I know... www.proftpd.de: Deutsche ProFTPD Dokumentation www.krename.net: Der Batch Renamer für KDE www.kbarcode.net: Die Barcode Solution für KDE -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] qmail queue delete help
Am Freitag, 21. April 2006 16:54 schrieb El Nino: > My Question:- > > 1) how to delete un preprocessed(not yet preprocessed) messages > in the qmail queue? http://packages.gentoo.org/search/?sstring=qmhandle -- www.stonki.de:the more I see, the more I know... www.proftpd.de: Deutsche ProFTPD Dokumentation www.krename.net: Der Batch Renamer für KDE www.kbarcode.net: Die Barcode Solution für KDE -- gentoo-user@gentoo.org mailing list
