RE: [Openvpn-users] /etc/init.d/openvpn does not work, manual is OK
Most problably this a problem concerned to the user used on the start process. If You're loged in as root and it start ok, try to make a 'su' to the user that openvpn runs and see what happens. Edson. _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Balazic Sent: quinta-feira, 20 de setembro de 2007 14:13 To: debian-user@lists.debian.org; [EMAIL PROTECTED] Subject: [Openvpn-users] /etc/init.d/openvpn does not work, manual is OK Hi! I've been using an OpenVPN client setup for months with success and now I decided to start it automatically during startup. I copied the config file to /etc/openvpn/tun1.conf and the used key file also : /etc/openvpn/key If I now start it with " /etc/init.d/openvpn start", it works fine. But if I reboot, it connects to the VPN server, but does not set the routes (I have "route-gateway 10.4.0.1" and "redirect-gateway def1" in the config file). The last lines after boot are : NET: Registered protocol familiy 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth1: no IPv6 routers present
sound card trouble.
On my Opti930 sound card the device manager shows a yellow exclamation mark by the Opti930 Sound/OPL3 Device. In the device status it says that it has a (code 10). I have changed the IRQ and DMA I have had trouble for a long time please could you advise me. And could I install a new sound card and would it conflict like the one I have.
Starting wlan0 instead of eth0
I'm new to this part of my debian system. Instead of having eth0 load up when my system starts, I want to run a script that enables my wireless card(wlan0) that uses ndiswrapper to load. My script looks like this: #!/bin/bash echo "Starting wireless networking." ifconfig eth0 down modprobe ndiswrapper sleep 1 iwconfig wlan0 mode Managed iwconfig wlan0 essid cocksmoker iwconfig wlan0 key blahblahblahmynetkey dhcpcd -t 10 -d -G 192.168.1.1 wlan0 echo "Wireless networking started.hopefully!" I don't know how to achive this so any pointers or links for some reading would be very appreciated. Thanks for your time.
aptitude synaptic gnome to be removed?
I just did a dist-upgrade on my unstable box and for some reason apt wanted to remove gnome, synaptic, aptitude and I think one other. Has any one else had this problem or can someone tell me the reason why? Thank you PS: Heres my sources.list #kde-3.4.1 deb http://pkg-kde.alioth.debian.org/kde-3.4.1 ./ deb http://debian.oregonstate.edu/debian/ unstable main non-free contrib deb-src http://debian.oregonstate.edu/debian/ unstable main non-free contrib deb http://security.debian.org/ stable/updates main contrib non-free
Re: debian hosting service
On 6/28/05, John Kelly <[EMAIL PROTECTED]> wrote: > On Tue, 28 Jun 2005 09:17:03 -0400, Mark D Hansen <[EMAIL PROTECTED]> > wrote: > > >can anyone recommend a good hosting company > > I'm considering using http://www.velocityserver.com/ since they offer > a dedicated server for $69.95 monthly and will preinstall debian. > > Anybody know much about them? > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > I second dreamhost.com they are a good service. Best I've ever used.
Re: aptitude synaptic gnome to be removed? [solved]
On 6/28/05, Rick Friedman <[EMAIL PROTECTED]> wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Thomas Weinbrenner wrote: > > I guess that in a few days we will get new versions of aptitude and > > synaptic which use apt 0.6, so we just have to wait (and use apt-get > > upgrade instead of dist-upgrade). > > Well, the day has arrived. New packages of synaptic (version 0.57.1-1) > and aptitude (version 0.2.15.9-3) are now in Sid. I've installed them > (along with the new apt) and everything is running smoothly so far. > > Rick > - -- > "Quotation, n: The act of repeating erroneously the words of another." > - - Ambrose Pierce > -BEGIN PGP SIGNATURE- > Version: GnuPG v1.4.1 (GNU/Linux) > > iD8DBQFCwgnDOlHq0MpoXLoRArNdAJ0baEWvRRvRdx3Z4p6fZjAkbKEJgACgqM9z > zq68vpQi1YMiPq1oxt/JDPA= > =8u11 > -END PGP SIGNATURE- > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > Ya, seems to be working for me now too.
Inscrição
Essa mensagem é destinada exclusivamente ao seu destinatário e pode conter informações confidenciais, protegidas por sigilo profissional ou cuja divulgação seja proibida por lei. O uso não autorizado de tais informações é proibido e está sujeito às penalidades cabíveis. This message is intended exclusively for its addressee and may contain information that is confidential and protected by a professional privilege or whose disclosure is prohibited by law. Unauthorized use of such information is prohibited and subject to applicable penalties. Sent from ProtonMail Mobile
Re: xorg in sid
On 7/12/05, Paul Scott <[EMAIL PROTECTED]> wrote: > Paul Scott wrote: > > > Robert Vangel wrote: > > > >> Paul Scott wrote: > >> > >>> Don't I need xserver-xorg which is dependent on xserver-common > > >>> 6.8.2.dfsg.1-1 and therefore not installable? > >>> > >> > >> > >> i386? http://packages.debian.org/unstable/x11/xserver-common version > >> looks fine to me...? > >> > >> > > Yes, i386. aptitude here doesn't think so. I'm trying to work around > > it. > > apt-get lets me install xserver-xorg. aptitude doesn't. > > Paul > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > I installed xorg in unstable today with synaptic and it removed xfree86. I've had no problems and even my Nvidia drivers still work. PS: Sorry Paul for sending it to your email the first time
Corrupt linux-source-2.6.12
I've apt-get'd the linux-source-2.6.12 package and when i try to unpack it with with tar -jxvf I get this error: [snip] linux-source-2.6.12/drivers/usb/net/usbnet.c tar: Skipping to next header tar: Archive contains obsolescent base-64 headers bzip2: Data integrity error when decompressing. Input file = (stdin), output file = (stdout) It is possible that the compressed file(s) have become corrupted. You can use the -tvv option to test integrity of such files. You can use the `bzip2recover' program to attempt to recover data from undamaged sections of corrupted files. tar: Child returned status 2 tar: Error exit delayed from previous errors I've tried to get it a couple times but keep getting the same error. The mirror I'm using is http://debian.osuosl.org but I've tried others. Is anyone else getting this error or is there a way to fix it? I've also tried running the bzip2recover program with no success. Thank you for your time Jason Edson
My Grub/MBR went bye bye
My girl just bought me a new laptop, Averatec 6100A, I used gparted from a live cd to split my ntfs partition to make way for debian. All went well and worked great. The problem is when I booted Wnd**sa dialog kept popping up saying there was an error. It kept popping up so I clicked fix and now when my computer boots it gets to the point where grub should show but then my computer keeps re booting. So my question is, how to I re-insyall grub eithout having to reinstall debian? I've looked for similar problems but with no luck. I used the windows disk to "fixmbr" but I want grub back. Sorry for the rambaling but I'm on pain med's for my back so I'm a little out of it. Thanks in advance, Jason Edson
Re: GNOME Wants Internet V6
On 8/18/05, Bryan Batten <[EMAIL PROTECTED]> wrote: > I'm running Debian Sarge 2.8.1-6. Every time it starts, I get the > following messages in .xsession-error: > > _IceTransSocketOpenCOTSServer: Unable to open socket for inet6 > _IceTransOpen: transport open failed for inet6/Pentium90: > _IceTransMakeAllCOTSServerListeners: failed to open listener for inet6 > > I've compiled my kernel without internet v6 support, and do not want > to have to add it in just to make this message go away. > > Anybody know what gnome setting I change to make it not try for v6? > > > > Thanks, > > Bryan > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > I think in the gnome networking tool or whatever its called, theres some options for trying ipv6 and you have to remove them manually. I use e17 and havent used gnome for awhile but I think that will solve your problem.
Re: how-to for using xfwm4 and ROX?
On 8/18/05, Cybe R. Wizard <[EMAIL PROTECTED]> wrote: > On Wed, 17 Aug 2005 10:18:11 -0500 > Albert <[EMAIL PROTECTED]> wrote: > > > I can find no documentation for using a window manager other than > > xdm, e.g. xfwm4 with ROX. I don't want either Gnome or KDE. Can > > anyone here point me in the right direction. X Windows was up > > and running before I installed these two packages. Now I just get > > a gray screen and no pop up menus. Also, some script has > > hijacked my text login and replaced it with a graphical login. I > > prefer to startx myself. Thanks ahead for any help. > > Your console login screen has been hijacked by xdm which is a display > manager (window manager picker in a graphical face), not a window > manager itself. You need to (as root): > apt-get install > Heck, install them all and play around. That's what I did and I still > change from time to time. > In addition, if you want to lose the graphical login (as root): > apt-get remove xdm > > Cybe R. Wizard > -- > Q: What's the difference between MicroSoft Windows and a virus? > A: Apart from the fact that viruses are supported by their authors, > use optimized, small code and usually perform well, none. > Winduhs > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > apt-get install enlightenment = )
Re: Debian Wiki Down: Permanantly?
On 8/25/05, kamaraju kusumanchi <[EMAIL PROTECTED]> wrote: > C Shore wrote: > > >-BEGIN PGP SIGNED MESSAGE- > >Hash: SHA1 > > > >Hi, > > > >I've confirmed that that debian wiki is down for others as well as > >myself, so I am wondering if anyone knows whether it has disappeared > >permanently or if it will be back soon. > > > >(http://wiki.debian.net) > > > >Thanks, > > > >Daniel > > > Does not work for me and has been like that for the past 2 days. Nothing > loads and the request just times out. I currently live in Ithaca, NY, USA. > > However there is another less widely known Debian wiki which you might > find interesting. > > http://www.linuks.mine.nu/debian-faq-wiki/ > > The write/edit access has to be obtained explicitly from the moderator > (A very good measure to avoid spam IMHO) after registering your username > and password. > > raju > > -- > Kamaraju S Kusumanchi > Graduate Student, MAE > Cornell University > http://www.people.cornell.edu/pages/kk288/ > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > Works here as well.
Re: hacked: can't delete files
On 8/26/05, Andreas Hatz <[EMAIL PROTECTED]> wrote: Hello, I have posted this user group with a similar problem in the past and have had great help, but this one seems to be a new problem: It looks like the affected machine has been rooted by a t0rn roootkit and then used to install a mail relay running on port 9020. This guy was pretty bold and rather cheeky, even creating a directory in his name in the root home directory. In this directory he seems to also have left a file which seems to contain his hotmail address. This is only by the way. The REAL problem I am having is this: chkrootkit has given the following: Searching for suspicious files and dirs, it may take a while.../usr/lib/libsh/.bashrc /usr/lib/libsh/.backup /usr/lib/libsh/.sniff /usr/lib/libsh/.bash_history /usr/lib/libsh/.owned /lib/security/.config/usr/lib/libsh/.backup /usr/lib/libsh/.sniff /usr/lib/libsh/.owned /lib/security/.config Now the following: ns:~# cd /usr/lib/libshns:/usr/lib/libsh# ls -altotal 44drwxr-xr-x 6 root root 4096 Aug 21 08:38 .drwxr-xr-x 38 root root 12288 Aug 22 20:38 ..drwxr-xr-x 2 root root 4096 Aug 22 19:24 .backup-rw--- 1 root root 365 Aug 21 08:37 .bash_history-rwxr-xr-x 1 root root 1206 Apr 18 2003 .bashrcdrwxr-xr-x 2 root root 4096 Aug 22 19:24 .owneddrwxr-xr-x 2 root root 4096 Aug 22 19:24 .sniff-rwxr-xr-x 1 root root 2039 Aug 22 20:28 hidedrwxr-xr-x 2 root root 4096 Aug 22 19:24 utilz Also: ns:/usr/lib/libsh# lsattr *-- hidens:/usr/lib/libsh# lsattr .b*-- .bash_history-- .bashrc ns:/usr/lib/libsh# lsattr .-- ./utilz-- ./hide Now try to delete: ns:/usr/lib/libsh# rm -rf *rm: cannot unlink `hide': Permission deniedrm: cannot remove directory `utilz': Permission deniedns:/usr/lib/libsh# ls -altotal 44drwxr-xr-x 6 root root 4096 Aug 21 08:38 .drwxr-xr-x 38 root root 12288 Aug 22 20:38 ..drwxr-xr-x 2 root root 4096 Aug 22 19:24 .backup-rw--- 1 root root 365 Aug 21 08:37 .bash_history-rwxr-xr-x 1 root root 1206 Apr 18 2003 .bashrcdrwxr-xr-x 2 root root 4096 Aug 22 19:24 .owneddrwxr-xr-x 2 root root 4096 Aug 22 19:24 .sniff-rwxr-xr-x 1 root root 2039 Aug 22 20:28 hidedrwxr-xr-x 2 root root 4096 Aug 22 19:24 utilz So it seems that the immutable attribute is not set on either of these files, but they can not be deleted. Also if I copy this directory to another place it becomes "invisible". ie you don't see it with ls, but you can change to it with cd. Make sense? I have done a fresh re-install of all commands used above. And I will be complately rebuilding the compromised box, but I am still intrigued by this. Anybody like to have a go? Best regards, Andreas Didnt you post this like a week ago and get answers? Just curious if my mail reader is acting up. Jason Edson
Re: Re: WWW.GUNSAMERICA.COM
On 9/12/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: WHERE CAN I GO TO FIND INFO ON SPANISH MADE DOUBLE BBL SHOTGUN? THANK YOU, WTH Goto INFOONSPANISHMADEDOUBLEBBLSHOTG UN.com = \
Re: Debian "install server" setup
On 9/12/05, Preston Boyington <[EMAIL PROTECTED]> wrote: On 9/12/05, Mark Lijftogt <[EMAIL PROTECTED]> wrote:> > Because you told us that it is for home use only I don't see any use in> FAI, or getting the whole shabang that Debian has to offer. Over 15.000> packages downloaded, and at the most 1000 used if you are totally lost> and out of luck.>>Thank you and I will start looking at apt-proxy.Most likely I won't (currently) need anything more than apt-proxy. BUT, when I decide to open my connection to others (I am one of thefew that has more than dial-up in my area) what will I need to do toallow them to install/update from my LAN? It won't happen for a while (two months at least) so I will have plenty of time to study up onwhat is needed.(seriously, I am not trying to be difficult. I just don't have anyoneelse to ask)Preston Ok, I'm just offering a suggestion as I'm not tottally sure what you want and maybe apt-proxy will work. But to save bandwidth on my network I use apt-cacher. It stores files that one machine has downloaded and lets all the other machines use those same files. Just an idea and sorry if this is no help to you.
Re: bootsplash
On 9/15/05, mess-mate <[EMAIL PROTECTED]> wrote: Nicolas Cadou <[EMAIL PROTECTED]> wrote:| Le 15 Septembre 2005 08:00, mess-mate a écrit:| > Thanks for that explanation.| > I've chosen several different 16bit modes ( seems the bootsplash | > works only on 16bit) without success.| > Or the patch don't support s3 cards ?|| Sorry, but I do not know any other solution to this problem of yours, except| of course, to get another video card :-) || Nicolas|Ok, thanks for your time.I'll look further or simply delete/uninstall it.mess-mate--Among the lucky, you are the chosen one.On my setup I use vga=794 for 1280x1024 and vga=791 for 1024x768 on another. I don't know if this helps at all but it's just my two cents.
USB not accepting new address
Hi all! Im try connect a webcam Genius in Debian Sarge. I install the module spca52xxx and quickcam, but when connect the webcam in USB (2.0) in dmesg returns this message: usb 2-2: new full speed USB device using uhci_hcd and address 6 usb 2-2: device not accepting address 6, error -71 lsusb returns me the webcam: Bus 005 Device 003: ID 0458:000e KYE Systems Corp. (Mouse Systems) VideoCAM Web Bus 005 Device 002: ID 04cc:1122 Philips Semiconductors Hub caminfo do not find the webcam. add to kernel (2.6.15) video for linux. Now i have the modules: Module Size Used by nvidia 4549396 12 vmnet 37796 9 vmmon 105708 0 stv680 26764 0 ovcamchip 20616 0 vicam 12032 0 usbvideo 26756 0 spca5xx 648464 0 bw_qcam12072 0 videodev 10112 5 stv680,vicam,usbvideo,spca5xx,bw_qcam sr_mod 16292 0 What is wrong? -- /* * Edson Marco Ferrari Junior * [EMAIL PROTECTED] * http://www.itasoa.com.br (no dia que funcionar eu aviso) */ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: USB not accepting new address
I dont have USB 1.1 in my micro. Or exists configuration what i dont made. On 5/29/06, Brad Sawatzky <[EMAIL PROTECTED]> wrote: On Sun, 28 May 2006, Edson Marco Ferrari Junior wrote: > Hi all! > > Im try connect a webcam Genius in Debian Sarge. > > I install the module spca52xxx and quickcam, but when connect the > webcam in USB (2.0) in dmesg returns this message: > > usb 2-2: new full speed USB device using uhci_hcd and address 6 > usb 2-2: device not accepting address 6, error -71 [ ... ] I had similar problems with my Creative WebCam NX Pro 2. After much googling I found the following suggestion worked. Try plugging the camera into a USB _1.x_ hub (or try bypassing the hub completely). Either workaround solved the problem for me. My camera won't initialize correctly if it's plugged into any of my USB 2 hubs (or into an add-on NEC-chipset USB2 pci card for that matter). It seems this is a semi-common issue with webcams (not just the spca52xxx driver). I don't know why USB transactions with a webcam would be so touchy, but a USB hard drive runs fine a full capacity through the same USB port... -- Brad -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- /* * Edson Marco Ferrari Junior * [EMAIL PROTECTED] * http://www.itasoa.com.br (no dia que funcionar eu aviso) */ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
mailsnarf in different files
Hi! I'm trying implements a more control on pop and smtp. With mailsnarf i get all e-mails, but i just save in one file, or print in screen. How i could to make to save each e-mail in different file? Or what other form to make it? Tank's -- /* * Edson Marco Ferrari Junior * [EMAIL PROTECTED] * http://www.itasoa.com.br (no dia que funcionar eu aviso) */
Re: mailsnarf in different files
The e-mails that i want to get are the all e-mails that are redirect from ports 25 and 110. For this reason i use a sniffer. []'s On 4/10/06, Andrew Sackville-West <[EMAIL PROTECTED]> wrote: > On Mon, Apr 10, 2006 at 11:09:01AM -0300, Edson Marco Ferrari Junior wrote: > > Hi! > > > > I'm trying implements a more control on pop and smtp. > > > > With mailsnarf i get all e-mails, but i just save in one file, or > > print in screen. > > I don'tknow mailsnarf, but... > > > > How i could to make to save each e-mail in different file? Or what > > other form to make it? > > if you want emails in individual files, you need to look into Maildir > format. -- /* * Edson Marco Ferrari Junior * [EMAIL PROTECTED] * http://www.itasoa.com.br (no dia que funcionar eu aviso) */
Re: mailsnarf in different files
Hi all!
To divide the log of mailsnarf in diferent files, i had to modify the
source of mailsnarf.
But it's very easy!
It's old code:
static void
print_mbox_msg(char *from, char *msg)
{
char *p;
time_t t;
t = time(NULL);
if (from == NULL)
from = "mailsnarf";
printf("From %s %s", from, ctime(&t));
while ((p = strsep(&msg, "\n")) != NULL) {
if (strncmp(p, "From ", 5) == 0)
putchar('>');
for (; *p != '\r' && *p != '\0'; p++)
putchar(*p);
putchar('\n');
}
putchar('\n');
fflush(stdout);
}
And it's new code:
static void
print_mbox_msg(char *from, char *msg)
{
char *p;
time_t t;
FILE *fl; //ponteiro para o arquivo
char *dir = "/home/edmafer/Maildir/new/";
char path[30];
t = time(NULL); //Pegando a data e hora de agora
sprintf(path,"%s%d.%s",dir,cont++,"eml");
fl = fopen(path,"w");
if (!fl) {
printf("\nErro ao tentar criar arquivo\n");
//message the error on open the file.
return;
}
if (from == NULL) //Definindo o from
from = "mailsnarf";
fprintf(fl,"From %s %s", from, ctime(&t));
while ((p = strsep(&msg, "\n")) != NULL) {
if (strncmp(p, "From ", 5) == 0)
putc('>',fl);
for (; *p != '\r' && *p != '\0'; p++)
putc(*p,fl);
putc('\n',fl);
}
putc('\n',fl);
fflush(stdout);
fclose(fl); //Fechando o arquivo
}
I redirect the messages in files. There are one variable named cont.
This variable is an integer that return an number of files.
On 4/10/06, Edson Marco Ferrari Junior <[EMAIL PROTECTED]> wrote:
Hi!
I'm trying implements a more control on pop and smtp.
With mailsnarf i get all e-mails, but i just save in one file, or
print in screen.
How i could to make to save each e-mail in different file? Or what
other form to make it?
Tank's
--
/*
* Edson Marco Ferrari Junior
* [EMAIL PROTECTED]
* http://www.itasoa.com.br (no dia que funcionar eu aviso)
*/
--
/*
* Edson Marco Ferrari Junior
* [EMAIL PROTECTED]
* http://www.itasoa.com.br (no dia que funcionar eu aviso)
*/
