I was confused about the type of address you were using. Seems to be a
memory mapped card then.
Anyhow if you will get that problem solved and run into problems with the
can card.....let me know

Heinz

----- Original Message -----
From: "David Olofson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, August 23, 2001 5:56 PM
Subject: Re: [rtl] rtlcan200+pcm3680+rtlinux-3.1 : kernal paging error


> On Thursday 23 August 2001 02:57, KC Lim wrote:
>
> > 2. Hard coded the address 0xDA000000 and irq 10
>
> This seems to be a *physical* address, and as such, you you must
> explicitly map into the virtual address space to use it.
>
> I'm not up to date with 2.4.x and how to do this the right way, so you'll
> have to ask someone else about the details. :-)
>
>
> > Unable to handle kernel paging request at virtual address da000000
>
> This means that no memory was mapped at 0xda000000 in the virtual address
> space when you tried to read or write that address. (It's pretty much
> what you'd call a "segfault" in user space.)
>
>
> [...]
>
> > When I do a lsmod, it shown that the module is initializing.
>
> Then you know the module "crashed" in init_module(). (The kernel assumes
> that the module is busy because the init function never returns.)
>
>
> > My question are:
> > 1. What does the message mean? how to interpret the message?
>
> See above. The rest is just a dump of the CPU registers, stack, code and
> some other stuff right after the page fault was trapped.
>
>
> > 2. What else do I need to change the code?
>
> See above.
>
>
> > 3. Is there a way to rmmod the module if it is busy ,beside rebooting
> > the machine?
>
> You could probably fiddle with the module usecount to make it appear to
> be unused again, but be aware that it's very likely to blow up in your
> face. The usecount is there to make sure that no one unloads stuff that
> someone else is using.
>
>
> //David Olofson --- Programmer, Reologica Instruments AB
>
> .- M A I A -------------------------------------------------.
> |      Multimedia Application Integration Architecture      |
> | A Free/Open Source Plugin API for Professional Multimedia |
> `----------------------------> http://www.linuxdj.com/maia -'
> .- David Olofson -------------------------------------------.
> | Audio Hacker - Open Source Advocate - Singer - Songwriter |
> `--------------------------------------> [EMAIL PROTECTED] -'
>
> -- [rtl] ---
> To unsubscribe:
> echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
> echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
> --
> For more information on Real-Time Linux see:
> http://www.rtlinux.org/
>

-- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
--
For more information on Real-Time Linux see:
http://www.rtlinux.org/

Reply via email to