Hi, I think you should look at the applications before posting a question on the mailing list. There is a rtkscatterglarecorrection tool, look at rtkscatterglarecorrection.cxx. You must init the coefficients. I'll add a check to make the error message more readable but please, take the time to look at all the examples available in applications before posting a question. Thanks, Simon
On Thu, Nov 3, 2016 at 3:21 PM, Zahid Hasan Ansari <[email protected]> wrote: > Dear Cyril Mory, > > > We are using ScatterGlareCorrectionImageFilter in our code but the > software is crashing. Please check in the screen shot. > > The RTKScatterGlareCorrectionImageFilter code is given below. > > //rtkLagCorrectionImageFilter > typedef rtk::LagCorrectionImageFilter<imageType, 3 > > LagCorrectionImageFilterType; > LagCorrectionImageFilterType::Pointer LagCorrection = > LagCorrectionImageFilterType::New(); > LagCorrection->SetInput(Projections); > > //rtkScatterGlareCorrectionImageFilter > typedef rtk::ScatterGlareCorrectionImageFilter<imageType, imageType, > double> ScatterGlareCorrectionImageFilterType; > ScatterGlareCorrectionImageFilterType::Pointer ScatterGlareCorrection > = ScatterGlareCorrectionImageFilterType::New(); > ScatterGlareCorrection->SetInput(LagCorrection->GetOutput()); > > > > > > Thanks & Regards > > Zahid Hasan Ansari > > > > ----- Original Message ----- > From: Zahid Hasan Ansari [mailto:[email protected]] > To: Cyril Mory [mailto:[email protected]], Simon Rit > [mailto:[email protected]] > Cc: [email protected], [email protected] > Subject: Re: [Rtk-users] Reg: CBCT 1k reconstruction error > > >> Dear Cyril Mory, >> >> >> Thank you for your help. We are able to reconstruct 1024 >> volume now. >> >> But the reconstruction time is around 4 minutes. Can you >> please help us to reduce the reconstruction time? >> >> We are using NVIDIA TITAN X GPU which has 12 GB memory. >> >> >> Thanks & Regards >> >> Zahid Hasan Ansari >> >> >> >> >> ----- Original Message ----- >> From: Cyril Mory [mailto:[email protected]] >> To: Zahid Hasan Ansari [mailto:[email protected]], Simon Rit >> [mailto:[email protected]] >> Cc: [email protected], [email protected] >> Subject: Re: [Rtk-users] Reg: CBCT 1k reconstruction error >> >> >> > Dear Zahid, >> > >> > The output looks correct. >> > >> > If the command line solution I suggested in a previous email works, the >> > best way to move forward would be to compare your code and that of >> > rtkfdk.cxx, and where it differs, make sure you have not introduced an >> > error. >> > >> > Cyril >> > >> > On 11/02/2016 02:37 PM, Zahid Hasan Ansari wrote: >> > > Dear Cyril Mory, >> > > >> > > I have done the same but the Output.mhd file is still 0 >> > KB for 1024 volume. Please find the attachment of the status of the output >> > displayed. >> > > >> > > Please suggest us for further process. >> > > >> > > >> > > Thanks & Regards >> > > >> > > Zahid Hasan Ansari >> > > >> > > >> > > >> > > >> > > ----- Original Message ----- >> > > From: Cyril Mory [mailto:[email protected]] >> > > To: Zahid Hasan Ansari [mailto:[email protected]], Simon >> Rit >> > [mailto:[email protected]] >> > > Cc: [email protected], [email protected] >> > > Subject: Re: [Rtk-users] Reg: CBCT 1k reconstruction error >> > > >> > > >> > >> I see two errors: >> > >> >> > >> Remove this line >> > >> >> > >> writer->SetNumberOfStreamDivisions(4); >> > >> >> > >> since only the streaming filter, not the write filter, needs to know >> > >> about the number of divisions. >> > >> And change the filename to >> > >> >> > >> "D:\\Output.mhd" >> > >> >> > >> It will write both the .mhd and the .raw files. >> > >> >> > >> I hope it helps, >> > >> Cyril >> > >> >> > >> On 11/02/2016 11:57 AM, Zahid Hasan Ansari wrote: >> > >>> Dear Cyril Mory, >> > >>> >> > >>> I have modified my file writer code and used >> > >> StreamingImageFilter. Now its not giving any error message but the >> final >> > >> output is 0 byte for 1024 volume. It working fine for 512 volume. >> > >>> Please check my modified file writer code given >> below. >> > >>> >> > >>> // Streaming depending on streaming capability of writer >> > >>> typedef itk::StreamingImageFilter<OutPutImageType, >> > >>> OutPutImageType> >> > >> StreamerType; >> > >>> StreamerType::Pointer streamerBP = StreamerType::New(); >> > >>> streamerBP->SetInput(feldkamp->GetOutput()); >> > >>> streamerBP->SetNumberOfStreamDivisions(4); >> > >>> >> > >>> //create a writer and write reconstructed file >> > >>> itk::ImageFileWriter<OutPutImageType>::Pointer writer; >> > >>> writer = itk::ImageFileWriter<OutPutImageType>::New(); >> > >>> writer->SetFileName("D:\\Output.raw"); >> > >>> writer->SetImageIO(io); >> > >>> writer->SetInput(streamerBP->GetOutput()); >> > >>> writer->SetNumberOfStreamDivisions(4); >> > >>> >> > >>> >> > >>> Please let me know if any clarification is required. >> > >>> >> > >>> >> > >>> Thanks & Regards >> > >>> >> > >>> Zahid Hasan Ansari >> > >>> Senior Design Engineer >> > >>> Mobile No. +91-9738379729 >> > >>> >> > >>> Panacea Medical Technologies Pvt. Ltd. >> > >>> Head Office: Plot #119, GF, Envision Technology Center, EPIP Area >> Phase >> > 1, >> > >> Whitefield, Bangalore - 560 066, Karnataka, INDIA >> > >>> Manufacturing Unit: Plot #87 A, Phase -II, Malur KIADB Industrial >> Area, >> > >> Malur - 563130. Kolar District. INDIA. >> > >>> Tel : +91 80 4242 8700 / 2845 4785 | Fax : + 91 42428710 | Url : >> > >> http://www.panaceamedical.com >> > >>> Bangalore - India. >> > >>> >> > >>> >> > >>> >> > >>> >> > >>> ----- Original Message ----- >> > >>> From: Cyril Mory [mailto:[email protected]] >> > >>> To: Zahid Hasan Ansari [mailto:[email protected]], Simon >> > Rit >> > >> [mailto:[email protected]] >> > >>> Cc: [email protected], [email protected] >> > >>> Subject: Re: [Rtk-users] Reg: CBCT 1k reconstruction error >> > >>> >> > >>> >> > >>>> Dear Zahid, >> > >>>> >> > >>>> The --divisions is an option of the command-line application rtkfdk. >> It >> > >>>> is not directly an option of the FDKConeBeamReconstructionFilter : >> > >>>> rather, it is passed to a streaming filter at the end of the >> pipeline. >> > >>>> Look for the following bit of code in rtkfdk.cxx : >> > >>>> >> > >>>> // Streaming depending on streaming capability of writer >> > >>>> typedef itk::StreamingImageFilter<CPUOutputImageType, >> > >>>> CPUOutputImageType> StreamerType; >> > >>>> StreamerType::Pointer streamerBP = StreamerType::New(); >> > >>>> streamerBP->SetInput( pfeldkamp ); >> > >>>> streamerBP->SetNumberOfStreamDivisions( args_info.divisions_arg >> ); >> > >>>> >> > >>>> You can find information on how a streaming filter works on this >> page: >> > >>>> >> > >>>> https://itk.org/Doxygen/html/classitk_1_1StreamingImageFilter.html >> > >>>> >> > >>>> I hope it helps, >> > >>>> >> > >>>> Cyril >> > >>>> >> > >>>> On 11/02/2016 09:01 AM, Zahid Hasan Ansari wrote: >> > >>>>> Dear Cyril Mory, >> > >>>>> >> > >>>>> I have tried but I am not getting where to give >> > >>>> --division 4 in my code. >> > >>>>> Please find my code given below and please let me >> > know >> > >>>> where I need to change in my code to make it work. >> > >>>>> int _tmain(int argc, _TCHAR* argv[]) >> > >>>>> { >> > >>>>> #pragma region "Variable declaration" >> > >>>>> const double PI = 3.14159265358979323846; >> > >>>>> float *angles; >> > >>>>> int nProj = 349; >> > >>>>> typedef unsigned short pixelType; >> > >>>>> typedef float OutpixelType; >> > >>>>> const int dimension = 3; >> > >>>>> typedef itk::Image<pixelType, dimension> imageType; >> > >>>>> typedef itk::ImageRegionConstIterator<imageType > >> ImageIteratorType; >> > >>>>> imageType::Pointer Projections = imageType::New(); >> > >>>>> >> > >>>>> #pragma endregion "Variable declaration" >> > >>>>> >> > >>>>> Projections = >> > >>>> ReadRawImages("D:\\CBCT\\CIRS_1204020_25022016153227\\Proj_%d.raw", >> > >> nProj); >> > >>>>> imageType::SpacingType pSpacing; >> > >>>>> pSpacing[0] = 0.2960; >> > >>>>> pSpacing[1] = 0.2960; >> > >>>>> pSpacing[2] = 0.2960; >> > >>>>> Projections->SetSpacing(pSpacing); >> > >>>>> >> > >>>>> imageType::PointType pOrigin; >> > >>>>> pOrigin[0] = -212.972; >> > >>>>> pOrigin[1] = -212.972; >> > >>>>> pOrigin[2] = -212.972; //-158.50; >> > >>>>> Projections->SetOrigin(pOrigin); >> > >>>>> >> > >>>>> Projections->Update(); >> > >>>>> >> > >>>>> //Read angles. >> > >>>>> char *angles_file = >> "D:/CBCT/CIRS_1204020_25022016153227/angle.txt"; >> > >>>>> angles = new float[nProj]; >> > >>>>> angles = readAngles(angles_file, angles); >> > >>>>> >> > >>>>> #pragma region"Geometry" >> > >>>>> // Geometry object >> > >>>>> typedef rtk::ThreeDCircularProjectionGeometry GeometryType; >> > >>>>> GeometryType::Pointer geometry = GeometryType::New(); >> > >>>>> for (unsigned int noProj = 0; noProj < nProj; noProj++) >> > >>>>> { >> > >>>>> geometry->AddProjection(1000.0, 1500.0, >> > >>>>> angles[noProj], 15.0, 10, >> 0, >> > >> 0); >> > >>>> // 136 half fan //2.07 Kidwai // >> > >>>>> } >> > >>>>> >> > >>>>> typedef rtk::ThreeDCircularProjectionGeometryXMLFileWriter >> > >>>> GeometryWriterType; >> > >>>>> GeometryWriterType::Pointer geometryWriter = >> > GeometryWriterType::New(); >> > >>>>> geometryWriter->SetFilename("D:\\geo.xml"); >> > >>>>> geometryWriter->SetObject(geometry); >> > >>>>> geometryWriter->WriteFile(); >> > >>>>> geometry->Update(); >> > >>>>> #pragma endregion "Geometry" >> > >>>>> >> > >>>>> //Define output image type >> > >>>>> >> > >>>>> #ifdef USE_CUDA >> > >>>>> typedef itk::CudaImage< OutpixelType, dimension > >> > >>>>> OutPutImageType; >> > >>>>> typedef rtk::ParkerShortScanImageFilter< >> > >>>>> OutPutImageType > >> PSSFType; >> > >>>>> typedef rtk::CudaFDKConeBeamReconstructionFilter >> > >>>>> FDKType; >> > >>>>> #else >> > >>>>> typedef itk::Image<OutpixelType, dimension> >> > >>>>> OutPutImageType; >> > >>>>> typedef >> > >>>>> rtk::ParkerShortScanImageFilter<OutPutImageType > >> PSSFType; >> > >>>>> typedef >> > >>>>> rtk::FDKConeBeamReconstructionFilter<OutPutImageType> >> > FDKType; >> > >>>>> #endif >> > >>>>> >> > >>>>> //ScatterCorrection >> > >>>>> typedef rtk::BoellaardScatterCorrectionImageFilter<imageType, >> > imageType >> > >>>> BoellaardScatterCorrectionImageFilterType; >> > >>>>> BoellaardScatterCorrectionImageFilterType::Pointer >> ScatterCorrection >> > = >> > >>>> BoellaardScatterCorrectionImageFilterType::New(); >> > >>>>> ScatterCorrection->SetInput(Projections); >> > >>>>> >> > >>>>> //VarianObiRawImageFilter >> > >>>>> typedef rtk::VarianObiRawImageFilter< imageType, >> > >>>>> OutPutImageType > >> > >>>> RawImageFilterType; >> > >>>>> RawImageFilterType::Pointer AttenuationFilter = >> > >>>> RawImageFilterType::New(); >> > >>>>> AttenuationFilter->SetInput(ScatterCorrection->GetOutput()); >> > >>>>> >> > >>>>> //Create the output image >> > >>>>> typedef rtk::ConstantImageSource< OutPutImageType > >> > >>>> ConstantImageSourceType; >> > >>>>> ConstantImageSourceType::PointType origin_p; >> > >>>>> ConstantImageSourceType::SizeType size_p; >> > >>>>> ConstantImageSourceType::SpacingType spacing_p; >> > >>>>> ConstantImageSourceType::Pointer projectionsSource = >> > >>>> ConstantImageSourceType::New(); >> > >>>>> origin_p[0] = -127.5; >> > >>>>> origin_p[1] = -127.5; >> > >>>>> origin_p[2] = -127.5; >> > >>>>> size_p[0] = 512; >> > >>>>> size_p[1] = 512; >> > >>>>> size_p[2] = 512; >> > >>>>> spacing_p[0] = (origin_p[0] / size_p[0]) * 2 * (-1); >> > >>>>> spacing_p[1] = (origin_p[1] / size_p[1]) * 2 * (-1); >> > >>>>> spacing_p[2] = (origin_p[2] / size_p[2]) * 2 * (-1); >> > >>>>> >> > >>>>> projectionsSource->SetOrigin(origin_p); >> > >>>>> projectionsSource->SetSpacing(spacing_p); >> > >>>>> projectionsSource->SetSize(size_p); >> > >>>>> projectionsSource->SetConstant(0); >> > >>>>> >> > >>>>> // Short scan image filter >> > >>>>> PSSFType::Pointer pssf = PSSFType::New(); >> > >>>>> pssf->SetInput(AttenuationFilter->GetOutput()); >> > >>>>> pssf->SetGeometry(geometry); >> > >>>>> pssf->InPlaceOff(); >> > >>>>> std::cout << "short scan image filter success" << std::endl; >> > >>>>> >> > >>>>> FDKType::Pointer feldkamp = FDKType::New(); >> > >>>>> feldkamp->SetInput(0, projectionsSource->GetOutput()); >> > >>>>> feldkamp->SetInput(1, pssf->GetOutput()); >> > >>>>> feldkamp->SetGeometry(geometry); >> > >>>>> feldkamp->GetRampFilter()->SetTruncationCorrection(1.0); >> > >>>>> feldkamp->GetRampFilter()->SetHannCutFrequency(5.0); >> > >>>>> feldkamp->GetRampFilter()->SetHannCutFrequencyY(5.0); >> > >>>>> feldkamp->GetRampFilter()->SetCosineCutFrequency(5.0); >> > >>>>> feldkamp->GetRampFilter()->SetHammingFrequency(5.0); >> > >>>>> feldkamp->GetRampFilter()->SetRamLakCutFrequency(5.0); >> > >>>>> feldkamp->SetGPUEnabled(1); >> > >>>>> feldkamp->SetNumberOfThreads(10000); >> > >>>>> >> > >>>>> #pragma region "Write volume" >> > >>>>> >> > >>>>> //Create a raw io for writing >> > >>>>> >> > >>>>> itk::RawImageIO<float, dimension>::Pointer io; >> > >>>>> io = itk::RawImageIO<float, dimension>::New(); >> > >>>>> >> > >>>>> for (unsigned int i = 0; i < dimension; i++) >> > >>>>> { >> > >>>>> io->SetDimensions(i, size_p[i]); >> > >>>>> io->SetSpacing(i, spacing_p[i]); >> > >>>>> io->SetOrigin(i, origin_p[i]); >> > >>>>> } >> > >>>>> io->SetHeaderSize(0); >> > >>>>> io->SetByteOrderToLittleEndian(); >> > >>>>> io->SetPixelType(itk::ImageIOBase::SCALAR); >> > >>>>> io->SetNumberOfComponents(1); >> > >>>>> io->SetNumberOfDimensions(3); >> > >>>>> >> > >>>>> //create a writer and write reconstructed file >> > >>>>> itk::ImageFileWriter<OutPutImageType>::Pointer writer; >> > >>>>> writer = itk::ImageFileWriter<OutPutImageType>::New(); >> > >>>>> writer->SetFileName("D:\\Output.raw"); >> > >>>>> writer->SetImageIO(io); >> > >>>>> writer->SetInput(feldkamp->GetOutput()); >> > >>>>> >> > >>>>> try >> > >>>>> { >> > >>>>> writer->Update(); >> > >>>>> } >> > >>>>> catch (itk::ExceptionObject & excp) >> > >>>>> { >> > >>>>> std::cerr << "Error while writing the image " << >> > >>>>> std::endl; >> > >>>>> std::cerr << excp << std::endl; >> > >>>>> getchar(); >> > >>>>> } >> > >>>>> #pragma endregion "WriteVolume" >> > >>>>> delete[] angles; >> > >>>>> return 0; >> > >>>>> } >> > >>>>> >> > >>>>> >> > >>>>> >> > >>>>> Thanks & Regards >> > >>>>> >> > >>>>> Zahid Hasan Ansari >> > >>>>> Senior Design Engineer >> > >>>>> Mobile No. +91-9738379729 >> > >>>>> >> > >>>>> Panacea Medical Technologies Pvt. Ltd. >> > >>>>> Head Office: Plot #119, GF, Envision Technology Center, EPIP Area >> > Phase >> > >> 1, >> > >>>> Whitefield, Bangalore - 560 066, Karnataka, INDIA >> > >>>>> Manufacturing Unit: Plot #87 A, Phase -II, Malur KIADB Industrial >> > Area, >> > >>>> Malur - 563130. Kolar District. INDIA. >> > >>>>> Tel : +91 80 4242 8700 / 2845 4785 | Fax : + 91 42428710 | Url : >> > >>>> http://www.panaceamedical.com >> > >>>>> Bangalore - India. >> > >>>>> >> > >>>>> >> > >>>>> >> > >>>>> >> > >>>>> ----- Original Message ----- >> > >>>>> From: Cyril Mory [mailto:[email protected]] >> > >>>>> To: Zahid Hasan Ansari [mailto:[email protected]], >> Simon >> > >> Rit >> > >>>> [mailto:[email protected]] >> > >>>>> Cc: [email protected], [email protected] >> > >>>>> Subject: Re: [Rtk-users] Reg: CBCT 1k reconstruction error >> > >>>>> >> > >>>>> >> > >>>>>> Dear Zahid, >> > >>>>>> >> > >>>>>> I was able to perform a reconstruction from your header and >> geometry >> > >>>>>> file, using the following command lines: >> > >>>>>> >> > >>>>>> rtkprojectshepploganphantom -o simulatedprojections.mha -g geo.xml >> > >>>>>> --phantomscale "128,128,128" --like Output.mhd >> > >>>>>> >> > >>>>>> rtkfdk -p . -r simulatedprojections.mha -g geo.xml -o fdk.mha >> > >> --hardware >> > >>>>>> cuda --dimension 1024 --spacing 0.25 --lowmem --divisions 4 >> > >>>>>> >> > >>>>>> The first computes projections through a Shepp & Logan phantom, >> with >> > >> the >> > >>>>>> same size, spacing, origin, etc... as your projections, using your >> > >>>>>> geometry file geo.xml. >> > >>>>>> >> > >>>>>> The second line performs the FDK reconstruction. I had to use both >> > the >> > >>>>>> "--lowmem" and the "--divisions 4" since I have little GPU memory >> > (3GB, >> > >>>>>> on a Geforce GTX 780). "--lowmem" loads the projections into memory >> > by >> > >>>>>> subsets of 16. "--divisions 4" cuts the reconstructed volume into 4 >> > >>>>>> parts, reconstructs them one by one, then assembles the results. >> Can >> > >> you >> > >>>>>> run the same commands and let us know whether you still encounter >> the >> > >>>>>> crash you mentioned ? If it works, you can use your own projection >> > data >> > >>>>>> in the second command line instead of "simulatedprojections.mha". >> > >>>>>> >> > >>>>>> Best, >> > >>>>>> >> > >>>>>> Cyril >> > >>>>>> >> > >>>>>> On 10/25/2016 01:13 PM, Zahid Hasan Ansari wrote: >> > >>>>>> >> > >>>>>>> Dear Sir, >> > >>>>>>> >> > >>>>>>> Please find the Header file in the attachment. >> > >>>>>>> >> > >>>>>>> >> > >>>>>>> Thanks & Regards >> > >>>>>>> >> > >>>>>>> Zahid Hasan Ansari >> > >>>>>>> >> > >>>>>>> >> > >>>>>>> ----- Original Message ----- >> > >>>>>>> From: Cyril Mory [mailto:[email protected]] >> > >>>>>>> To: Zahid Hasan Ansari [mailto:[email protected]], >> > Simon >> > >>>> Rit >> > >>>>>> [mailto:[email protected]] >> > >>>>>>> Cc: [email protected], [email protected] >> > >>>>>>> Subject: Re: [Rtk-users] Reg: CBCT 1k reconstruction error >> > >>>>>>> >> > >>>>>>> >> > >>>>>>>> Dear Zahid, >> > >>>>>>>> >> > >>>>>>>> We do not need the projections file, at least not for a first >> stage >> > >> of >> > >>>>>>>> error tracking. We only need the header. >> > >>>>>>>> Try the following command line: >> > >>>>>>>> >> > >>>>>>>> rtkprojections -p . -r yourProjectionsFileName -o proj.mhd >> > >>>>>>>> >> > >>>>>>>> It should write a "proj.mhd" and a "proj.raw". The "proj.mhd" >> file >> > is >> > >>>>>>>> what we need, and it is a very light text file. The "proj.raw" >> > >> contains >> > >>>>>>>> the pixel values, but at the moment we do not need them. We will >> > >> create >> > >>>>>>>> our own proj.raw file, filled with zeros, which should be enough >> to >> > >>>>>>>> track down the error you encounter. >> > >>>>>>>> >> > >>>>>>>> Looking forward to receiving your file, >> > >>>>>>>> Cyril >> > >>>>>>>> >> > >>>>>>>> On 10/25/2016 09:22 AM, Zahid Hasan Ansari wrote: >> > >>>>>>>>> Dear Sir, >> > >>>>>>>>> >> > >>>>>>>>> The single raw file of the projections is 1.4 GB >> > and >> > >> we >> > >>>> are >> > >>>>>> not >> > >>>>>>>> able to send this big file to you. Can you please suggest other >> > >>>>>> alternatives >> > >>>>>>>> for this? >> > >>>>>>>>> Or can you provide us the PC configuration to >> solve >> > >> the >> > >>>>>> issue? >> > >>>>>>>>> Let me know if any other clarification is >> required. >> > >>>>>>>>> >> > >>>>>>>>> >> > >>>>>>>>> Thanks & Regards >> > >>>>>>>>> >> > >>>>>>>>> Zahid Hasan Ansari >> > >>>>>>>>> >> > >>>>>>>>> >> > >>>>>>>>> >> > >>>>>>>>> ----- Original Message ----- >> > >>>>>>>>> From: Cyril Mory [mailto:[email protected]] >> > >>>>>>>>> To: Zahid Hasan Ansari [mailto:[email protected]], >> > >> Simon >> > >>>>>> Rit >> > >>>>>>>> [mailto:[email protected]] >> > >>>>>>>>> Cc: [email protected], [email protected] >> > >>>>>>>>> Subject: Re: [Rtk-users] Reg: CBCT 1k reconstruction error >> > >>>>>>>>> >> > >>>>>>>>> >> > >>>>>>>>>> Hello Zahid, >> > >>>>>>>>>> >> > >>>>>>>>>> We will need the header of your projections file, too (It is >> best >> > >> if >> > >>>>>> you >> > >>>>>>>>>> have all your projections as a single .mhd and a single .raw >> > file, >> > >> so >> > >>>>>> it >> > >>>>>>>>>> should be 3-D image, and you send only the .mhd file). >> > >>>>>>>>>> >> > >>>>>>>>>> Regards, >> > >>>>>>>>>> Cyril >> > >>>>>>>>>> >> > >>>>>>>>>> On 10/19/2016 03:18 PM, Zahid Hasan Ansari wrote: >> > >>>>>>>>>>> Dear Cyril Mory, >> > >>>>>>>>>>> >> > >>>>>>>>>>> >> > >>>>>>>>>>> I have only used RTK version 1.3.0. but >> in >> > the >> > >>>> error >> > >>>>>>>>>> message it is showing RTK version 1.2.0. >> > >>>>>>>>>>> Please find the attachment of the >> geometry >> > >> file >> > >>>> of >> > >>>>>> our >> > >>>>>>>>>> projections. >> > >>>>>>>>>>> Thanks & Regards >> > >>>>>>>>>>> >> > >>>>>>>>>>> Zahid Hasan Ansari >> > >>>>>>>>>>> >> > >>>>>>>>>>> >> > >>>>>>>>>>> >> > >>>>>>>>>>> ----- Original Message ----- >> > >>>>>>>>>>> From: Cyril Mory [mailto:[email protected]] >> > >>>>>>>>>>> To: Zahid Hasan Ansari >> [mailto:[email protected]], >> > >>>> Simon >> > >>>>>>>> Rit >> > >>>>>>>>>> [mailto:[email protected]] >> > >>>>>>>>>>> Cc: [email protected], >> [email protected] >> > >>>>>>>>>>> Subject: Re: [Rtk-users] Reg: CBCT 1k reconstruction error >> > >>>>>>>>>>> >> > >>>>>>>>>>> >> > >>>>>>>>>>>> Dear Zahid, >> > >>>>>>>>>>>> >> > >>>>>>>>>>>> Without some more information, it's unlikely that we find the >> > >>>> source >> > >>>>>> of >> > >>>>>>>>>>>> the problem. Here are a few things you can do to help us (and >> > >>>>>> therefore >> > >>>>>>>>>>>> yourself): >> > >>>>>>>>>>>> - try version 1.3.0 of RTK: there have been considerable >> > changes >> > >> in >> > >>>>>> the >> > >>>>>>>>>>>> Cuda forward and back projection filters since v1.2.0, so >> your >> > >>>>>> problem >> > >>>>>>>>>>>> might disappear just by upgrading to the new version >> > >>>>>>>>>>>> - create a small example that reproduces your problem. You >> can, >> > >> for >> > >>>>>>>>>>>> example, simulate a geometry, simulate projections of a shepp >> > >> logan >> > >>>>>>>>>>>> phantom, and reconstruct from these projections (take a look >> at >> > >>>>>>>>>>>> http://wiki.openrtk.org/index.php/RTK/Scripts/FDK if you need >> > an >> > >>>>>>>>>>>> example). And send us the script >> > >>>>>>>>>>>> - OR send us your geometry file and the header of your >> > >> projections >> > >>>>>> file >> > >>>>>>>>>>>> (no need to send the projection data itself, we'll create a >> > >>>>>> zero-filled >> > >>>>>>>>>>>> stack of projections), and the command line that crashes >> > >>>>>>>>>>>> >> > >>>>>>>>>>>> Best regards, >> > >>>>>>>>>>>> Cyril >> > >>>>>>>>>>>> >> > >>>>>>>>>>>> On 10/17/2016 02:27 PM, Zahid Hasan Ansari wrote: >> > >>>>>>>>>>>>> Dear Simon Rit, >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>> Please find the screen shot in the >> > >> attachment. >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>> Thanks & Regards >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>> Zahid Hasan Ansari >> > >>>>>>>>>>>>> Senior Design Engineer >> > >>>>>>>>>>>>> Mobile No. +91-9738379729 >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>> Panacea Medical Technologies Pvt. Ltd. >> > >>>>>>>>>>>>> Head Office: Plot #119, GF, Envision Technology Center, EPIP >> > >> Area >> > >>>>>>>> Phase >> > >>>>>>>>>> 1, >> > >>>>>>>>>>>> Whitefield, Bangalore - 560 066, Karnataka, INDIA >> > >>>>>>>>>>>>> Manufacturing Unit: Plot #87 A, Phase -II, Malur KIADB >> > >> Industrial >> > >>>>>>>> Area, >> > >>>>>>>>>>>> Malur - 563130. Kolar District. INDIA. >> > >>>>>>>>>>>>> Tel : +91 80 4242 8700 / 2845 4785 | Fax : + 91 42428710 | >> Url >> > : >> > >>>>>>>>>>>> http://www.panaceamedical.com >> > >>>>>>>>>>>>> Bangalore - India. >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>> ----- Original Message ----- >> > >>>>>>>>>>>>> From: Simon Rit [mailto:[email protected]] >> > >>>>>>>>>>>>> To: Zahid Hasan Ansari >> > [mailto:[email protected]] >> > >>>>>>>>>>>>> Cc: [email protected] >> > >>>>>>>> [mailto:[email protected]], >> > >>>>>>>>>>>> [email protected] >> > >>>>>>>>>>>>> Subject: Re: [Rtk-users] Reg: CBCT 1k reconstruction error >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>>> Dear Zahid, >> > >>>>>>>>>>>>>> There is no screenshot so I'm guessing that the problem is >> a >> > >> CUDA >> > >>>>>>>>>> memory >> > >>>>>>>>>>>>>> error. If you use the command line tool rtkfdk, you should >> > >> first >> > >>>>>> make >> > >>>>>>>>>>>> sure >> > >>>>>>>>>>>>>> that you use the --lowmem option to stream the projection >> > >> images. >> > >>>>>> If >> > >>>>>>>> it >> > >>>>>>>>>>>> is >> > >>>>>>>>>>>>>> no sufficient, you can split your volume using the >> > --divisions. >> > >>>> The >> > >>>>>>>>>>>>>> corresponding C++ code can be found in rtkfdk.cxx. >> > >>>>>>>>>>>>>> Is Panacea Medical using RTK? We are happy to advertise the >> > use >> > >>>> of >> > >>>>>>>> RTK >> > >>>>>>>>>> on >> > >>>>>>>>>>>>>> our case studies webpage >> > >>>>>>>>>>>> <http://openrtk.org/RTK/project/casestudies.html>. >> > >>>>>>>>>>>>>> Simon >> > >>>>>>>>>>>>>> >> > >>>>>>>>>>>>>> On Sat, Oct 15, 2016 at 11:12 AM, Zahid Hasan Ansari < >> > >>>>>>>>>>>>>> [email protected]> wrote: >> > >>>>>>>>>>>>>> >> > >>>>>>>>>>>>>>>> Dear Sir\Madam, >> > >>>>>>>>>>>>>>>> >> > >>>>>>>>>>>>>>>> I am unable to do 1024x1024x1024 >> > >>>>>> reconstruction >> > >>>>>>>>>> using >> > >>>>>>>>>>>> RTK >> > >>>>>>>>>>>>>>>> CudaFDKConeBeamReconstructionFilter. Please check the >> > screen >> > >>>>>> shoot >> > >>>>>>>> of >> > >>>>>>>>>>>>>>> the >> > >>>>>>>>>>>>>>>> same. >> > >>>>>>>>>>>>>>>> >> > >>>>>>>>>>>>>>>> I am using the following items >> given >> > >> below. >> > >>>>>>>>>>>>>>>> 1. RTK - RTK version 1.3 >> > >>>>>>>>>>>>>>>> 2. ITK - ITK version 4.7 >> > >>>>>>>>>>>>>>>> 3. Visual Studio 2013 win 64-bit >> > console >> > >>>>>>>> application >> > >>>>>>>>>>>>>>>> 4. GeForce GTX TITAN X GPU. >> > >>>>>>>>>>>>>>>> 5. CUDA 7. >> > >>>>>>>>>>>>>>>> 6. CMake version 3.4.3. >> > >>>>>>>>>>>>>>>> 7. Windows 7 64-bit OS. >> > >>>>>>>>>>>>>>>> >> > >>>>>>>>>>>>>>>> Please provide the solution of this >> > and >> > >> let >> > >>>> me >> > >>>>>>>> know >> > >>>>>>>>>> if >> > >>>>>>>>>>>>>> any >> > >>>>>>>>>>>>>>>> other clarification is required. >> > >>>>>>>>>>>>>>>> >> > >>>>>>>>>>>>>>>> >> > >>>>>>>>>>>>>>>> >> > >>>>>>>>>>>>>>>> Thanks & Regards >> > >>>>>>>>>>>>>>>> >> > >>>>>>>>>>>>>>>> Zahid Hasan Ansari >> > >>>>>>>>>>>>>>>> Senior Design Engineer >> > >>>>>>>>>>>>>>>> Mobile No. +91-9738379729 >> > >>>>>>>>>>>>>>>> >> > >>>>>>>>>>>>>>>> Panacea Medical Technologies Pvt. Ltd. >> > >>>>>>>>>>>>>>>> Head Office: Plot #119, GF, Envision Technology Center, >> > EPIP >> > >>>> Area >> > >>>>>>>>>> Phase >> > >>>>>>>>>>>>>>> 1, >> > >>>>>>>>>>>>>>>> Whitefield, Bangalore - 560 066, Karnataka, INDIA >> > >>>>>>>>>>>>>>>> Manufacturing Unit: Plot #87 A, Phase -II, Malur KIADB >> > >>>> Industrial >> > >>>>>>>>>> Area, >> > >>>>>>>>>>>>>>>> Malur - 563130. Kolar District. INDIA. >> > >>>>>>>>>>>>>>>> Tel : +91 80 4242 8700 / 2845 4785 | Fax : + 91 42428710 >> | >> > >> Url >> > >>>> : >> > >>>>>>>>>>>>>>>> http://www.panaceamedical.com >> > >>>>>>>>>>>>>>>> Bangalore - India. >> > >>>>>>>>>>>>>>> ________________________________________ >> > >>>>>>>>>>>>>>> PANACEA MEDICAL TECHNOLOGIES PVT. LTD. >> > >>>>>>>>>>>>>>> Head Office: Plot #119, GF, Envision Technology Center, >> EPIP >> > >>>> Area >> > >>>>>>>>>> Phase >> > >>>>>>>>>>>>>>> 1, Whitefield, Bangalore - 560 066, Karnataka, INDIA >> > >>>>>>>>>>>>>>> Manufacturing Unit: Plot #87 A, Phase -II, Malur KIADB >> > >>>> Industrial >> > >>>>>>>>>> Area, >> > >>>>>>>>>>>>>>> Malur - 563130. Kolar District. INDIA. >> > >>>>>>>>>>>>>>> >> > >>>>>>>>>>>>>>> Tel : +91 80 4242 8700 / 2845 4785 >> > >>>>>>>>>>>>>>> Fax : + 91 80 42428710 >> > >>>>>>>>>>>>>>> Url : http://www.panaceamedical.com >> > >>>>>>>>>>>>>>> >> ____________________________________________________________ >> > >>>>>>>>>>>>>>> ________________ >> > >>>>>>>>>>>>>>> PMT EMAIL DISCLAIMER: >> > >>>>>>>>>>>>>>> >> > >>>>>>>>>>>>>>> This email and any files transmitted with it are >> > confidential >> > >>>> and >> > >>>>>>>>>>>> intended >> > >>>>>>>>>>>>>>> solely for the use of the individual or entity to whom >> they >> > >> are >> > >>>>>>>>>>>> addressed. >> > >>>>>>>>>>>>>>> If you have received this email in error please notify the >> > >>>> system >> > >>>>>>>>>>>> manager. >> > >>>>>>>>>>>>>>> Please note that any views or opinions presented in this >> > email >> > >>>> are >> > >>>>>>>>>>>> solely >> > >>>>>>>>>>>>>>> those of the author and do not necessarily represent those >> > of >> > >>>> the >> > >>>>>>>>>>>> company. >> > >>>>>>>>>>>>>>> Finally, the recipient should check this email and any >> > >>>> attachments >> > >>>>>>>> for >> > >>>>>>>>>>>> the >> > >>>>>>>>>>>>>>> presence of viruses. The company accepts no liability for >> > any >> > >>>>>> damage >> > >>>>>>>>>>>>>>> caused by any virus transmitted by this email. >> > >>>>>>>>>>>>>>> >> > >>>>>>>>>>>>>>> >> > >>>>>>>>>>>>>>> _______________________________________________ >> > >>>>>>>>>>>>>>> Rtk-users mailing list >> > >>>>>>>>>>>>>>> [email protected] >> > >>>>>>>>>>>>>>> http://public.kitware.com/mailman/listinfo/rtk-users >> > >>>>>>>>>>>>>>> >> > >>>>>>>>>>>>> ________________________________________ >> > >>>>>>>>>>>>> PANACEA MEDICAL TECHNOLOGIES PVT. LTD. >> > >>>>>>>>>>>>> Head Office: Plot #119, GF, Envision Technology Center, EPIP >> > >> Area >> > >>>>>>>> Phase >> > >>>>>>>>>> 1, >> > >>>>>>>>>>>> Whitefield, Bangalore - 560 066, Karnataka, INDIA >> > >>>>>>>>>>>>> Manufacturing Unit: Plot #87 A, Phase -II, Malur KIADB >> > >> Industrial >> > >>>>>>>> Area, >> > >>>>>>>>>>>> Malur - 563130. Kolar District. INDIA. >> > >>>>>>>>>>>>> Tel : +91 80 4242 8700 / 2845 4785 >> > >>>>>>>>>>>>> Fax : + 91 80 42428710 >> > >>>>>>>>>>>>> Url : http://www.panaceamedical.com >> > >>>>>>>>>>>>> >> > >> >> > >> ____________________________________________________________________________ >> > >>>>>>>>>>>>> PMT EMAIL DISCLAIMER: >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>> This email and any files transmitted with it are >> confidential >> > >> and >> > >>>>>>>>>> intended >> > >>>>>>>>>>>>> solely for the use of the individual or entity to whom they >> > are >> > >>>>>>>>>> addressed. >> > >>>>>>>>>>>>> If you have received this email in error please notify the >> > >> system >> > >>>>>>>>>> manager. >> > >>>>>>>>>>>>> Please note that any views or opinions presented in this >> email >> > >> are >> > >>>>>>>>>> solely >> > >>>>>>>>>>>>> those of the author and do not necessarily represent those >> of >> > >> the >> > >>>>>>>>>> company. >> > >>>>>>>>>>>>> Finally, the recipient should check this email and any >> > >> attachments >> > >>>>>> for >> > >>>>>>>>>> the >> > >>>>>>>>>>>>> presence of viruses. The company accepts no liability for >> any >> > >>>> damage >> > >>>>>>>>>>>>> caused by any virus transmitted by this email. >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>> >> > >>>>>>>>>>>>> _______________________________________________ >> > >>>>>>>>>>>>> Rtk-users mailing list >> > >>>>>>>>>>>>> [email protected] >> > >>>>>>>>>>>>> http://public.kitware.com/mailman/listinfo/rtk-users >> > >>>>>>>>>>> ________________________________________ >> > >>>>>>>>>>> PANACEA MEDICAL TECHNOLOGIES PVT. LTD. >> > >>>>>>>>>>> Head Office: Plot #119, GF, Envision Technology Center, EPIP >> > Area >> > >>>>>> Phase >> > >>>>>>>> 1, >> > >>>>>>>>>> Whitefield, Bangalore - 560 066, Karnataka, INDIA >> > >>>>>>>>>>> Manufacturing Unit: Plot #87 A, Phase -II, Malur KIADB >> > Industrial >> > >>>>>> Area, >> > >>>>>>>>>> Malur - 563130. Kolar District. INDIA. >> > >>>>>>>>>>> Tel : +91 80 4242 8700 / 2845 4785 >> > >>>>>>>>>>> Fax : + 91 80 42428710 >> > >>>>>>>>>>> Url : http://www.panaceamedical.com >> > >>>>>>>>>>> >> > >> >> > >> ____________________________________________________________________________ >> > >>>>>>>>>>> PMT EMAIL DISCLAIMER: >> > >>>>>>>>>>> >> > >>>>>>>>>>> This email and any files transmitted with it are confidential >> > and >> > >>>>>>>> intended >> > >>>>>>>>>>> solely for the use of the individual or entity to whom they >> are >> > >>>>>>>> addressed. >> > >>>>>>>>>>> If you have received this email in error please notify the >> > system >> > >>>>>>>> manager. >> > >>>>>>>>>>> Please note that any views or opinions presented in this email >> > are >> > >>>>>>>> solely >> > >>>>>>>>>>> those of the author and do not necessarily represent those of >> > the >> > >>>>>>>> company. >> > >>>>>>>>>>> Finally, the recipient should check this email and any >> > attachments >> > >>>> for >> > >>>>>>>> the >> > >>>>>>>>>>> presence of viruses. The company accepts no liability for any >> > >> damage >> > >>>>>>>>>>> caused by any virus transmitted by this email. >> > >>>>>>>>>>> >> > >>>>>>>>> ________________________________________ >> > >>>>>>>>> PANACEA MEDICAL TECHNOLOGIES PVT. LTD. >> > >>>>>>>>> Head Office: Plot #119, GF, Envision Technology Center, EPIP >> Area >> > >>>> Phase >> > >>>>>> 1, >> > >>>>>>>> Whitefield, Bangalore - 560 066, Karnataka, INDIA >> > >>>>>>>>> Manufacturing Unit: Plot #87 A, Phase -II, Malur KIADB >> Industrial >> > >>>> Area, >> > >>>>>>>> Malur - 563130. Kolar District. INDIA. >> > >>>>>>>>> Tel : +91 80 4242 8700 / 2845 4785 >> > >>>>>>>>> Fax : + 91 80 42428710 >> > >>>>>>>>> Url : http://www.panaceamedical.com >> > >>>>>>>>> >> > >> >> > >> ____________________________________________________________________________ >> > >>>>>>>>> PMT EMAIL DISCLAIMER: >> > >>>>>>>>> >> > >>>>>>>>> This email and any files transmitted with it are confidential >> and >> > >>>>>> intended >> > >>>>>>>>> solely for the use of the individual or entity to whom they are >> > >>>>>> addressed. >> > >>>>>>>>> If you have received this email in error please notify the >> system >> > >>>>>> manager. >> > >>>>>>>>> Please note that any views or opinions presented in this email >> are >> > >>>>>> solely >> > >>>>>>>>> those of the author and do not necessarily represent those of >> the >> > >>>>>> company. >> > >>>>>>>>> Finally, the recipient should check this email and any >> attachments >> > >> for >> > >>>>>> the >> > >>>>>>>>> presence of viruses. The company accepts no liability for any >> > damage >> > >>>>>>>>> caused by any virus transmitted by this email. >> > >>>>>>>>> >> > >>>>>>>>> >> > >>>>>>>>> >> > >>>>>>> ________________________________________ >> > >>>>>>> PANACEA MEDICAL TECHNOLOGIES PVT. LTD. >> > >>>>>>> Head Office: Plot #119, GF, Envision Technology Center, EPIP Area >> > >> Phase >> > >>>> 1, >> > >>>>>> Whitefield, Bangalore - 560 066, Karnataka, INDIA >> > >>>>>>> Manufacturing Unit: Plot #87 A, Phase -II, Malur KIADB Industrial >> > >> Area, >> > >>>>>> Malur - 563130. Kolar District. INDIA. >> > >>>>>>> Tel : +91 80 4242 8700 / 2845 4785 >> > >>>>>>> Fax : + 91 80 42428710 >> > >>>>>>> Url : http://www.panaceamedical.com >> > >>>>>>> >> > >> >> > >> ____________________________________________________________________________ >> > >>>>>>> PMT EMAIL DISCLAIMER: >> > >>>>>>> >> > >>>>>>> This email and any files transmitted with it are confidential and >> > >>>> intended >> > >>>>>>> solely for the use of the individual or entity to whom they are >> > >>>> addressed. >> > >>>>>>> If you have received this email in error please notify the system >> > >>>> manager. >> > >>>>>>> Please note that any views or opinions presented in this email are >> > >>>> solely >> > >>>>>>> those of the author and do not necessarily represent those of the >> > >>>> company. >> > >>>>>>> Finally, the recipient should check this email and any attachments >> > for >> > >>>> the >> > >>>>>>> presence of viruses. The company accepts no liability for any >> damage >> > >>>>>>> caused by any virus transmitted by this email. >> > >>>>>>> >> > >>>>> ________________________________________ >> > >>>>> PANACEA MEDICAL TECHNOLOGIES PVT. LTD. >> > >>>>> Head Office: Plot #119, GF, Envision Technology Center, EPIP Area >> > Phase >> > >> 1, >> > >>>> Whitefield, Bangalore - 560 066, Karnataka, INDIA >> > >>>>> Manufacturing Unit: Plot #87 A, Phase -II, Malur KIADB Industrial >> > Area, >> > >>>> Malur - 563130. Kolar District. INDIA. >> > >>>>> Tel : +91 80 4242 8700 / 2845 4785 >> > >>>>> Fax : + 91 80 42428710 >> > >>>>> Url : http://www.panaceamedical.com >> > >>>>> >> > >> >> > >> ____________________________________________________________________________ >> > >>>>> PMT EMAIL DISCLAIMER: >> > >>>>> >> > >>>>> This email and any files transmitted with it are confidential and >> > >> intended >> > >>>>> solely for the use of the individual or entity to whom they are >> > >> addressed. >> > >>>>> If you have received this email in error please notify the system >> > >> manager. >> > >>>>> Please note that any views or opinions presented in this email are >> > >> solely >> > >>>>> those of the author and do not necessarily represent those of the >> > >> company. >> > >>>>> Finally, the recipient should check this email and any attachments >> for >> > >> the >> > >>>>> presence of viruses. The company accepts no liability for any damage >> > >>>>> caused by any virus transmitted by this email. >> > >>>>> >> > >>>>> >> > >>>>> >> > >>>> >> > >>> ________________________________________ >> > >>> PANACEA MEDICAL TECHNOLOGIES PVT. LTD. >> > >>> Head Office: Plot #119, GF, Envision Technology Center, EPIP Area >> Phase >> > 1, >> > >> Whitefield, Bangalore - 560 066, Karnataka, INDIA >> > >>> Manufacturing Unit: Plot #87 A, Phase -II, Malur KIADB Industrial >> Area, >> > >> Malur - 563130. Kolar District. INDIA. >> > >>> Tel : +91 80 4242 8700 / 2845 4785 >> > >>> Fax : + 91 80 42428710 >> > >>> Url : http://www.panaceamedical.com >> > >>> >> > >> >> > >> ____________________________________________________________________________ >> > >>> PMT EMAIL DISCLAIMER: >> > >>> >> > >>> This email and any files transmitted with it are confidential and >> > intended >> > >>> solely for the use of the individual or entity to whom they are >> > addressed. >> > >>> If you have received this email in error please notify the system >> > manager. >> > >>> Please note that any views or opinions presented in this email are >> > solely >> > >>> those of the author and do not necessarily represent those of the >> > company. >> > >>> Finally, the recipient should check this email and any attachments for >> > the >> > >>> presence of viruses. The company accepts no liability for any damage >> > >>> caused by any virus transmitted by this email. >> > >>> >> > >>> >> > >>> >> > >>> >> > >>> >> > >> >> > >> >> > > >> > > ________________________________________ >> > > PANACEA MEDICAL TECHNOLOGIES PVT. LTD. >> > > Head Office: Plot #119, GF, Envision Technology Center, EPIP Area Phase >> 1, >> > Whitefield, Bangalore - 560 066, Karnataka, INDIA >> > > Manufacturing Unit: Plot #87 A, Phase -II, Malur KIADB Industrial Area, >> > Malur - 563130. Kolar District. INDIA. >> > > >> > > Tel : +91 80 4242 8700 / 2845 4785 >> > > Fax : + 91 80 42428710 >> > > Url : http://www.panaceamedical.com >> > > >> > >> ____________________________________________________________________________ >> > > PMT EMAIL DISCLAIMER: >> > > >> > > This email and any files transmitted with it are confidential and >> intended >> > > solely for the use of the individual or entity to whom they are >> addressed. >> > > If you have received this email in error please notify the system >> manager. >> > > Please note that any views or opinions presented in this email are >> solely >> > > those of the author and do not necessarily represent those of the >> company. >> > > Finally, the recipient should check this email and any attachments for >> the >> > > presence of viruses. The company accepts no liability for any damage >> > > caused by any virus transmitted by this email. >> > > >> > >> > >> > > > > ________________________________________ > PANACEA MEDICAL TECHNOLOGIES PVT. LTD. > Head Office: Plot #119, GF, Envision Technology Center, EPIP Area Phase 1, > Whitefield, Bangalore - 560 066, Karnataka, INDIA > Manufacturing Unit: Plot #87 A, Phase -II, Malur KIADB Industrial Area, Malur > - 563130. Kolar District. INDIA. > > Tel : +91 80 4242 8700 / 2845 4785 > Fax : + 91 80 42428710 > Url : http://www.panaceamedical.com > ____________________________________________________________________________ > PMT EMAIL DISCLAIMER: > > This email and any files transmitted with it are confidential and intended > solely for the use of the individual or entity to whom they are addressed. > If you have received this email in error please notify the system manager. > Please note that any views or opinions presented in this email are solely > those of the author and do not necessarily represent those of the company. > Finally, the recipient should check this email and any attachments for the > presence of viruses. The company accepts no liability for any damage > caused by any virus transmitted by this email. > _______________________________________________ Rtk-users mailing list [email protected] http://public.kitware.com/mailman/listinfo/rtk-users
