Hi folks. At work we use the 10.x.0.0/16 subnets for our different sites such that 10.1. = Leeds 10.2. = Doncaster 10.3. = Crewe 10.4. = Castleford etc.
We now need to configure a dial-on-demand ISDN router and configure it to dial out on seeing traffic for 6 different subnets - all to the same phone number. So far so good, no real problems so far. The problem is that one of the remote subnets is 10.1.0.x/24. Luckily I don't use 10.1.0.X at Leeds, as we start with 10.1.1.1. The question is, how can I configure a route for 10.1.0.x/24 to go down the router, without buggering up 10.1.x.x/16 One possible solution is ARP proxying (I think that's what it's called). For the subnets that don't cause a problem I can use static routes without a problem. For the IP addresses 10.1.0.0/24 I would like the firewall to respond to all ARP requests by supplying it's own MAC address; and then forward all appropriate IP traffic down the ISDN line. Is this possible and if so how do I do it? I'll probably be using either Smoothwall, IPCop, or a slimmed down RH7.3 setup. -- Gary Stainburn This email does not contain private or confidential material as it may be snooped on by interested government parties for unknown and undisclosed purposes - Regulation of Investigatory Powers Act, 2000 -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
