Here is what it looks like
class: NETWORK
bus: PCI
detached: 0
device: eth
driver: unknown
desc: "BROADCOM Corporation|unknown device 14e4:4401"
vendorId: 14e4
deviceId: 4401
subVendorId: 1043
subDeviceId: 80a8
pciType: 1
No sign of being "disabled"
im not sure what lspci is cause i couldn't run it. Im almost sure my PATH is ok so im not sure what to do now.
Thanks a lot
At 01:39 PM 12/16/2002 -0600, you wrote:
On Mon, 2002-12-16 at 12:34, Ben Russo wrote: > check your /etc/sysconfig/hwconf and see if it is listed as "disabled" > if it is then use "neat" and you might be able to "enable" it. > > With RH8 I have had this happen on several of my machines, the NIC would > work during the install process, then after the reboot the NIC wouldn't > come up, I checked the hwconf file and it was listed as disabled. > > Also check "lspci" that might give you some clues. >lspci is exactly what I was going to suggest only I usually run it with the -v option. You might need to run it as root to get all the information. lspci -v Bret -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
-- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
