I think this will require an "expert --noprobe" install command and then you will have to specify your SCSI driver manually.
On Mon, 2002-12-09 at 15:28, Freerk J. Bosscha wrote: > I have tried to upgrade my 7.3 linux version to 8.0 but this failed: > > system: ASUS CUV4X-DLS BIOS 1007 > one cpu > 2 scsi disks > 866 Mhz > > controller: ADAPTEC AHA2940 Ultra/UltraW bios 1.23S3 > > Message:.... > enabled ExtINT on CPU#0 > ESR value before enabling vector: 00000004 > ESR value after enabling vector: 00000000 > ENABLING IO-APIC IRQs > setting 2 in the phys_id_present_map > ...changing IO_APIC physical APIC ID to 2 ... ok > ..TIMER: vector=0x31 pin1=2 pin2=0 > > After this the system "hang" > > Any suggestions what to do to make this upgrade works fine... > > Thanks in advance > > -- > Freerk J. Bosscha > > Networkadministrator > Noordelijke Hogeschool Leeuwarden > Tesselschadestraat 12 > 8913 HB Leeuwarden > The Netherlands > > Phone : xx-31-(0)58 2961 435 > after 01/01/2003 > xx-31-(0)58 2961 875 > > fax : xx-31-(0)58 2961 466 > Mobile: xx-31-(0)6 231 28 068 > e-mail: [EMAIL PROTECTED] > url : http://www.fac.nhl.nl/~bosscha > > -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
