Thank you for your advice but the tape is still not working.
 When I try to back up /etc to tape. It seems the process has been finish
 from sever screen. but when I pull out the tape, I found that the tape
 still in original staus, it did not wind.
 Folloing is the info from dmesg
 
 ----------------------------------------------------------------------
 [root@Milo /root]# dmesg|grep 'st0'
 A#tached scsi tape st0 at scsi1, channel 0, id 6,slun 0
 st0: Block limits 1 - 16777215 bytes.
 st0: Error with sense data: Current st09:00: sense key Unit Attentiin



[root@Milo ]# mt -f /dev/st0 status
SCSI 2 tape drive:
File number=0, block number=0, partition=0.
Tape block size 512 bytes. Density codem0x26 (unknown to this mt)S
Soft error count since last statusb0
General status bits on (41010000):
BOT ONLINE IM_REP_EN


 ---------------------------------------------------------------------
 Can you give me some more suggestion?
 Thank you very much.
 
 
 
> On Mon, 27 May 2002, R.Curtis wrote:
> 
> > >>>>> "jz" == Jianping Zhu <[EMAIL PROTECTED]> writes:
> > 
> >     jz> Thank you for your advice.
> >     jz>  mt -f /dev/st0 status
> >     jz>  and
> >     jz>  mt -f /dev/st0 rewind
> > 
> >     jz> both work.
> > 
> > Good  then everything is talking correctly.
> > 
> >     jz> how can I make  sure that I  have permission to write to /dev/st0?
> > 
> > Permissions on /dev/st0 should be such that if you are trying to use
> > it as a user:
> > 
> > crw-rw-rw-    1 root     disk       9,   0 Apr 11 10:25 /dev/st0
> > 
> > 
> >     jz> how can I check that /dev/st0 are seen from dmesg ?
> > 
> > 
> > This is not important now that you are able to talk to the drive.
> > 
> > Now  try  something like:
> > 
> > mt -f /dev/st0 rewind    
> > 
> > then
> > 
> > tar cvf /dev/st0 /etc
> > 
> > 
> > 
> > 
> >     jz> Thank you!!
> > 
> >     jz> On Mon, 27 May 2002, R.Curtis wrote:
> > 
> >     >> >>>>> "jz" == Jianping Zhu <[EMAIL PROTECTED]> writes:
> >     >> 
> >     jz> I have IBM iseries 230 sever with ridhat linux 7.1on it. I recently boutgh
> >     jz> a new tape drive for IBM (20/40GB DDS/4 4mm Internal tape dirve)
> >     >> 
> >     jz> I think I have setup the tape  drive in the server. the server can detect
> >     jz> the tape drive now.
> >     >> 
> >     jz> But when I try to use linux command to back up a small diretory to the
> >     jz> tape, it does not work. The tape does not even wind.
> >     >> 
> >     jz> I used the commamd
> >     jz> tar cvzf /dev/st0 /home/jianping
> >     jz> I could see the tape-drive activity indicator and Catridge presence
> >     jz> indicator on. But When the process finished, I found nothing had been
> >     jz> done. the tape did not even wind(it was still in the original status).
> >     >> 
> >     jz> What counld be the potential problem?
> >     jz> Any suggestion will be greatly appreciated!!
> >     >> 
> >     >> 
> >     >> How about trying to use some of the mt commands, such as
> >     >> mt -f /dev/st0 status
> >     >> or
> >     >> mt -f /dev/st0 rewind
> >     >> 
> >     >> These commands are part of the mt-st rpm and should at least tell
> >     >> you if you can talk to the drive.
> >     >> 
> >     >> Are you sure that you have permission to write to /dev/st0 and 
> >     >> that /dev/st0 are seen from dmesg ?
> >     >> 
> >     >> 
> >     >> 
> >     >> -- 
> >     >> R. Curtis
> >     >> mailto:[EMAIL PROTECTED]                           http://www.ccux.com
> >     >> 
> >     >> 
> >     >> 
> >     >> _______________________________________________
> >     >> Redhat-list mailing list
> >     >> [EMAIL PROTECTED]
> >     >> https://listman.redhat.com/mailman/listinfo/redhat-list
> >     >> 
> > 
> > 
> >     jz> --------------------------------
> >     jz> Jianping Zhu
> >     jz> Department of Computer Science
> >     jz> Univerity of Georgia 
> >     jz> Athens, GA 30602
> >     jz> Tel 706 5423900
> >     jz> --------------------------------
> > 
> > -- 
> > R. Curtis
> > mailto:[EMAIL PROTECTED]                           http://www.ccux.com
> > 
> > 
> > 
> > _______________________________________________
> > Redhat-list mailing list
> > [EMAIL PROTECTED]
> > https://listman.redhat.com/mailman/listinfo/redhat-list
> > 
> 
> 
> --------------------------------
> Jianping Zhu
> Department of Computer Science
> Univerity of Georgia 
> Athens, GA 30602
> Tel 706 5423900
> --------------------------------
> 
> 
> 
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
> 


--------------------------------
Jianping Zhu
Department of Computer Science
Univerity of Georgia 
Athens, GA 30602
Tel 706 5423900
--------------------------------



_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to