On Sat, 20 Apr 2002 08:54:35 -0700 (PDT), script <[EMAIL PROTECTED]>
wrote :
> someone gave me a linksys ethernetfast cable/dsl
> router and i'm trying to hook it up with redhat 7.2.
> has anyone out there used a linksys with redhat 7.2?
> any pointers?
>
> basically, to configure the router, first i must make
> sure that i obtain a dynamic ip address on boot, which
> i'm doing - this ip address theoretically should be
> assigned by teh dhcp server on the router, but i don't
> know how to tell how this is happening. so, after
> boot, i open netscape and type in the ip address of
> the router - network unavailabe error pops up. i
> try to ping the router and same thing.
>
> any help would be much appreciated. much.
>
> thanks in advance.
You need to check if your network is up and running properly.
As root, type ifconfig
eth0 Link encap:Ethernet HWaddr 00:04:5A:5A:AC:33
inet addr:192.168.14.4 Bcast:192.168.14.255
Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1 RX packets:1168 errors:0 dropped:0 overruns:0 frame:0
TX packets:1109 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:716546 (699.7 Kb) TX bytes:104184 (101.7 Kb)
Interrupt:10 Base address:0xcc00
You should see something similar to this except that the IP addresses
are different.
--
Later,
Jeremy Tan
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
