Did you replace the cable? Brian
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Darryl Harvey Sent: Monday, March 18, 2002 6:08 PM To: [EMAIL PROTECTED] Subject: RE: Running a console on the serial port COM1 in 7.1?? Possible? How can I tell what is causing errors on my NIC ?? eth0 Link encap:Ethernet HWaddr 00:80:AD:71:9F:50 inet addr:192.168.8.200 Bcast:192.168.8.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27923 errors:37788 dropped:0 overruns:0 frame:0 TX packets:20636 errors:58 dropped:0 overruns:0 carrier:58 collisions:551 txqueuelen:100 RX bytes:7610071 (7.2 Mb) TX bytes:7090200 (6.7 Mb) Interrupt:5 Base address:0xef00 There is a high level of errors there, I have swapped the Hub to a switch, tried it @ 10Mhz HDX and also 100Mhz FDX, but still errors. Is there anyway I can see what the errors are ?? (Short of swapping the cable (Which is hard wired into a remote location) Thanks Darryl _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
