Hi all, yesterday, I ran into a small problem with an older box that I set up with RHL 6.2. It's using a S3 Trio64+ VGA card with 2MB RAM, which is giving me a slight headache. I tried both XF86Setup and Xconfigurator (both updated to the latest available updates). The card is recognized and the S3 xserver started, however, I'm getting a vertical area of black and discoloured pixels on the left hand side of the screen, both at 800x600/16bpp and 1024x768/16bpp (haven't tried 8bpp yet). The card itself should be ok, as I had it running under RHL 5.2 in the same box (though on a different motherboard) - of course I forgot to copy that config before wiping the drive... :-/ I already had a look at /proc/interrupts, /proc/dmas and /proc/ioports, but couldn't see any conflicts (the PC has a NCR810 SCSI controller, a Yamaha OPL3 sound card, a 3c509 NIC and the onboard IO (IDE, serial)).
Anybody out there with an idea as to what could be causing this and/or what I could investigate? Thanks, Thomas -- http://www.netmeister.org/news/learn2quote.html ...'cause only lusers quote signatures! Thomas Ribbrock | http://www.ribbrock.org | ICQ#: 15839919 "You have to live on the edge of reality - to make your dreams come true!" _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
