Hi Scott
Do this:
rmmod tulip
cd /usr/src/linux/drivers/net/
tail -10 tulip.c
This will show you how to compile your tulip module for SMP. Do so, on my
system it is
gcc -D__SMP__ -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c
tulip.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"
then visit scyld.com for how to install that module (I can't remeber hwo
to offhand). Then,
insmod tulip
Please note I have never doen this for SMP, but the same principles apply
for adding modules, so this shoudk work. As always, ymmv.
hth
charles
On Sat, 7 Apr 2001, Scott Bowling wrote:
> I installed Redhat 7.0 on my linux box today using the SMP option for the
> initial install. By doing this it installed two kernels...the single
> process kernel and the multiprocessor kernel. I have a Linksys ethernet
> card and am using the tulip driver from www.scyld.com(?). I have a binary
> RPM for the drivers and when I installed them using the RPM it installed
> them on the single processor /lib/modules, even while running in the smp
> kernel. I can insmod the pci-scan/tulip drivers in the single process
> kernel but I can't seem to get it to insmod in the smp kernel. I am not all
> that familiar with this and wondered if there was a why to get this to work.
>
> When I try to insmod the mods on the smp kernel I get a bunch of unresolved
> symbol messages (same for tulip). It works just great in the single process
> build.
>
> Any ideas? Is there a way to 'fool' the system into using the other
> /lib/modules?
>
> After performing a depmod I have a whole bunch of unresolved symbols...any
> ideas?
>
> Thanks in advance,
> Scott
k
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
