"Mikkel L. Ellertson" wrote:
> On Wed, 28 Mar 2001, researcher p wrote:
>
> >
> > Hi
> > I am new Linux user and I want to do a simple network with a linux
> > router
> > I have 3 Linux boxes (Redhat 7.0) and mi network looks like this:
> >
> > |-------| |-------| |-------|
> > | | | | | |
> > | a |---------------| b |---------------| c |
> > |-------| |-------| |-------|
> >
> > eth0 192.168.2.2 eth0 192.168.1.2
> >
> > eth0 192.168.2.1 eth1 192.168.1.1
> >
> >
> >
> > as you see, simple!
> > I just want to configure the router (b)
> >
> > What to do, I am confuse with so many information about
> > masquarade - Not for this application.
> > ipchains - If you want to controll the trafic between
> a, b, and c.
> > packet forwarding - Probably not.
> > netconf - One tool for setting up your NICs.
> > make xconfig - This is for configuring your kernel when you
> are compiling a custom kernel.
> >
> > I dont know where to start =P
> >
> >
> > Please help, I just want to do a simple LAN configuration
> >
> > regards
> > paul
> >
> Set up your NICs with netconfig, or use control-pannel from X. You will
> need IP forwarding on. The routes for the networks will be set up as
> part of setting up the NICs.
And of course set up b as the gateway machine for both a and c so the will
know where to send the packets to get to the other subnet.
Bret
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
