i just upgraded my kernel from 2.2.17 to 2.2.18 (kernels are from
kernel.org) and for some reason the udma is not working correctly. here
is my dmesg:
RAM disk driver initialized: 16 RAM disks of 4096K size
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide0: VIA Bus-Master (U)DMA Timing Config Success
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
ide1: VIA Bus-Master (U)DMA Timing Config Success
hda: WDC AC34000L, ATA DISK drive
hdb: Maxtor 88400D8, ATA DISK drive
hdc: WDC WD84AA, ATA DISK drive
hdd: WDC WD307AA-77BAA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC34000L, 3815MB w/256kB Cache, CHS=969/128/63
hdb: Maxtor 88400D8, 8011MB w/256kB Cache, CHS=1021/255/63
hdc: WDC WD84AA, 8063MB w/2048kB Cache, CHS=16383/16/63
hdd: WDC WD307AA-77BAA0, 29333MB w/2048kB Cache, CHS=59598/16/63
to me it looks like it says that the udma is working. hdparm tells me
way different. what am i doing wrong?
TIA
eric
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
