Peter,

You have to forward the packets by using ipchains. 

I think it will solve your problem.

Kiran


On Fri, 29 Dec 2000, Bret Hughes wrote:

> Peter Peltonen wrote:
> 
> > Okay, I've updated my subnet plan to look like this:
> >
> > net       name    netmask    ip
> >
> > 128      dmz1    .224       .129 - .158
> > 224      router  .224       .225 - .224
> >
> > I've changed the network settings accordint to this plan. I made .158 the new
> > dmz gateway. So my network looks like this:
> >
> > HDSL .254
> >  |
> >  |
> > eth0 .253
> > Linux-router
> > eth1 .158
> >  |
> >  |
> > eth0 .129
> > Linux-client
> >
> > My router's routing table looks like this:
> >
> > Kernel IP routing table
> > Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
> > 193.65.111.224  0.0.0.0         255.255.255.224 U     0      0        0 eth0
> > 193.65.111.128  0.0.0.0         255.255.255.224 U     0      0        0 eth1
> > 127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
> > 0.0.0.0         193.65.111.254  0.0.0.0         UG    0      0        0 eth0
> >
> > And my client's routing table looks like this:
> >
> > Kernel IP routing table
> > Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
> > 193.65.111.129  0.0.0.0         255.255.255.255 UH    0      0        0 eth0
> > 193.65.111.128  0.0.0.0         255.255.255.224 U     0      0        0 eth0
> > 127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
> > 0.0.0.0         193.65.111.158  0.0.0.0         UG    0      0        0 eth0
> >
> > But still the same thing: Client can ping router but nothing else. Router can
> > ping everything.
> >
> > I'm still doing something wrong...?
> 
> I have not really looked at the subneting but are you sure your isp is sending
> packets to you router, or are they merely sending them in that direction from
> theirs?  I believe they need to know that all packets destined for your subnets
> will go through your router so your router will know to get them and then
> forward them.  You might try tcpdump or ethereal to monitor the outgoing
> interface and see if the packets are arriving on the wire looking for the final
> machine or for the router as is correct, I believe.
> 
> Bret
> 
> 
> 
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
> 



_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to