RH5.2 Standard kernel
Linux version 2.0.36
The drives are EIDE, everything installed great and is working fine.
Have now added an Adaptec 1520/1522 and a Tandberg cartridge tape. No
matter what I do I cannot get the scsi card detected.
tried lilo options at boot
:linux aha152x=0x340,11,7
tried lilo otions in lilo.conf
dmesg always has:
scsi: 0 hosts.
scsi: detected total.
cat /proc/sci/scsi returns:
Attached devices: none
cat /proc/interrupts returns:
0: 191379 timer
1: 2 keyboard
2: 0 cascade
5: 1288 Intel EtherExpress Pro 10/100 Ethernet
8: 1 + rtc
12: 0 PS/2 Mouse
13: 1 math error
14: 22703 + ide0
/proc/ioports returns:
0000-001f: dma1
0020-003f: pic1
0040-005f: timer
0060-006f: keyboard
0070-007f: rtc
0080-009f: dma page reg
00a0-00bf: pic2
00c0-00df: dma2
00f0-00ff: npu
01f0-01f7: ide0
02f8-02ff: serial(auto)
03c0-03df: vga+
03f0-03f5: floppy
03f6-03f6: ide0
03f7-03f7: floppy DIR
03f8-03ff: serial(auto)
e400-e41f: Intel Speedo3 Ethernet
f000-f007: IDE DMA
f008-f00f: IDE DMA
Interrupt 11 has been setup for standard ISA and not PCI in the BIOS
Please help.
--
Ken Cole
Satisfaction Software
e-mail: [EMAIL PROTECTED]
Voice: +61 7 3268 4722
Facsimile: +61 7 3268 4359
Mobile: 0418 792 349
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
