Hi Jeff
Thanks for the help. It is now working. I made the mistake of believing
help and man pages. I was using direct to printer, instead of remote
thanks again
david
On Thu, 9 Nov 2000, Jeff Hogg wrote:
>
> -----Original Message-----
> From: David Brett <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Cc: [EMAIL PROTECTED]
> <[EMAIL PROTECTED]>; mike allerhand
> <[EMAIL PROTECTED]>; Ernie LaBonte <[EMAIL PROTECTED]>;
> [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Date: Thursday, November 09, 2000 2:27 PM
> Subject: Re: printing directly to port 9100
>
>
> >I am having the same problem. I am trying to print to a hp printer with a
> >jetDirect card.
> >
> >Here is the printcap created by the printtool in the control-panel
> >
> >##PRINTTOOL3## DIRECT ljet4 600x600 letter {} LaserJet4 Default {}
> >lp:\
> >:sd=/var/spool/lpd/lp:\
> >:mx#0:\
> >:sh:\
> >:af=/var/spool/lpd/lp/acct:\
> >:lp=/dev/null:\
> >:if=/var/spool/lpd/lp/filter:
> >
> >What dose not show up here is the ip address, which is correct or the
> >port. Here I have tried 9100 and 515 and no port.
> >
>
> This works for me at my office. This isn't a jet direct, but works very
> similarly. Have you folks used the rm and rp directives? These printers
> are essentially remote queues after all. Hope this helps.
>
> ##PRINTTOOL3## REMOTE
> xerox:\
>:sd=/var/spool/lpd/xerox:\
>:mx#0:\
>:sh:\
>:rm=XES.myaddress.com:\
>:rp=raw:
>
> Jeff Hogg
>
>
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
>
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
