This is for 6.2:
From:
http://www.redhat.com/support/hardware/intel/62/rh6.2-hcl-i.ld-11.html#ss11.
3
"Linksys Fast 10/100 tulip clones: These cards need Becker's new tulip
driver installed to function properly. Instructions for compiling are at the
bottom of the source code. Note:If "lspci" or "cat /proc/pci" report an
"unknown" vender and device then the card is probably a Linksys LNE 100TX
version "4.0" or"4.1" card and Becker's latest driver must be used."
If you *very* new to Linux as you claim, I may recommend you go purchase a
$20US NE2000 compatible card, and try to work with that one. Your card
seems to require new drivers, and the process will take time for you to
learn how to do it, troubleshoot/configure it, etc.
If you've got the time and patience, go for it, otherwise you'll save lots
of possible late nights by going for another NIC.
Marco
----- Original Message -----
From: "Andy Myers" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, October 21, 2000 7:33 PM
Subject: RE: ethernet problems ...please help!
> I tried running netconfig, but I don't even think the OS detects the card.
> I'm new to linux, so I've got no clue to how to get the device to be
> detected. It doesn't show up during bootup. ...If I add an interface in
> Gnome's "Network Configuration," it names it eth0. ...then it shows up
> during bootup, but it fails.
>
> Any suggestions?
>
>
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Mikkel L. Ellertson
> Sent: Saturday, October 21, 2000 5:17 PM
> To: [EMAIL PROTECTED]
> Subject: Re: ethernet problems ...please help!
>
>
> On Sat, 21 Oct 2000, Andy Myers wrote:
>
> > I just installed Red Hat Linux 7. I didn't get any network setup
options
> > during installation, which makes me think that my ethernet card was not
> > detected. How can I set up my ethernet card now after installation?
> >
> > I have a Linksys LNE100TX card, which is supposed to be supported.
> >
> > Any place on the web where I can get help with this?
> >
> > Thanks!
> >
> run netconfig
>
>
>
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
>
>
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
>
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
