Hi all,
I am kind of a new Linux user (but learning more and more everyday).
After I figured out that I have a winmodem, I went ahead and bought a REAL
modem (USR 5610). Today, I tried to configure it under Linux (RedHat 6.0).
I've read couple of articles from different forums about this modem, and I
followed their instructions. Here what I got:
1- cat /proc/pci revealed following for the modem:
Bus 0, device 15, function 0:
Serial controller: Unknown vendor Unknown device (rev 1).
Vendor id=12b9. Device id=1008.
Medium devsel. IRQ 9.
I/O at 0x1040 [0x1041]
2- I typed the following as suggested:
setserial /dev/ttys1 irq 9 port 0x1040 ^fourport ^auto_irq skip_test
autoconfig spd_vhi
3- I got the following error:
/dev/ttys1: Input/Output error
4- I also link /dev/modem and /dev/ttys1
5- to see the current settings, I typed the following:
setserial /dev/modem
and got this:
/dev/modem, UART:unknown, Port:0x02f8, IRQ:3
Obviously, minicom did not communicate with the modem as well.
FYI, under windows the modem is on COM2 (initially it was COM5, I changed
it to COM2) and IRQ 9.
Could anyone give me any advise how to get the USR 5610 working under
Linux. I know many people use this modem with Linux without a problem.
Well, here I am...
Thanks a lot for your help.
Volkan
[EMAIL PROTECTED]
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
