To answer my own question:
http://us2.samba.org/samba/docs/man/smb.conf.5.html#interfaces
____SNIP____ example line
interfaces = eth0 192.168.2.10/24 192.168.3.10/255.255.255.0
____SNIP____ end example line
Mike
Mike Cathey wrote:
>
> Just a quick question. I could and will check the samba docs, but I
> thought someone on this list might be able to give me some quick
> info/pointers too. In this gentleman's situation, were he to setup
> samba (which I realize he doesn't need to), how would he configure samba
> to only answer requests on eth1? Does samba support this or would you
> have to use tcp wrappers or something?
>
> Thanks,
>
> Mike
>
> "Mikkel L. Ellertson" wrote:
> >
> > At 11:01 AM 4/4/00 -0400, you wrote:
> > >Morning Everyone:
> > >
> > >I'm running Red Hat 6.2 with Samba. My Linux box has 2 Ethernet cards in
> > >it, eth0 going to my cable modem provider and getting its IP Address via
> > >DHCP, and eth1 statically assigned 192.168.1.1. I have a Windows 2000
> > >machine, installed on a NTFS partiton type on another machine. This
> > >machine has an IP Address of 192.168.1.2. From the Windows 2000 machine,
> > >I can go to Network Neighborhood, and see my home directory on the Linux
> > >box. Networking appears to be working correctly.
> > >
> > >What I would like to do is the reverse, if possible. If I leave the
> > >Windows 2000 machine on, and I telnet into the Linux box from a remote
> > >location, is it possible to see what's on the Windows machine? If so, is
> > >this something that can/should be set up through Samba, or is there a
> > >different approach to take?
> > >
> > >- Mike
> > >
> > smbclient will do most of what you want. You can also mount Windows shares
> > on your Linux box using smbfs and the smbmount command. You do not need to
> > have Samba running on the Linux machine to use smbclient, or to mount Windows
> > shares.
> >
> > Mikkel
> >
> > --
> > Do not meddle in the affairs of dragons,
> > for you are crunchy and taste good with ketchup.
> >
> > --
> > To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
> > as the Subject.
>
> --
> To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
> as the Subject.
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
