Kyle
> > what kind of SCSI card?
>
> I'd have to take a physical look but its either an AIC-787x
> or AIC-788x on-board on a ASUS Tec M/Board (P2s - I think)
>
> the unit is new - less than 1 month
>
>
> Is it possible that I have the termination "wrong" ?
It's always possible. What all is hanging off the SCSI bus? (cat
/proc/scsi/scsi should give a list). Normally terminator power is enabled
on all devices but termination is only enabled on the first & last device
on the bus. Is the card at one end of the chain or in the middle? That
is, do you have internal devices plugged into one side of the card and
external to the other? If so, you'll need to disable termination on the
card and terminate the last internal & external device on the chain. Do
you see something like "Press Ctrl-A for SCSI select" when you boot the
machine? If so, check the termination settings on the card.
See if any of this helps and report back if it doesn't.
-Eric
Eric Sisler
Library Computer Technician
Westminster Public Library
Westminster, CO, USA
[EMAIL PROTECTED]
Linux - don't fear the Penguin.
Want to know what we use Linux for?
Visit http://gromit.westminster.lib.co.us/linux
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
