I've seen similar messages when I've used newer compilers. Does your 6.1
system use the same compiler version as what comes in RawHide?
David
At 12:34 PM 2/20/00 -0500, you wrote:
>So far, I've received no reply regarding my problem building the RPM
>for sndconfig in Rawhide, but that's OK for now, because I can't build
>the kernel-2.2.14-.15.0RPM under RH6.1 either.
>
>"rpm --rebuild --target i586 kernel-2.2.14-.15.0.src.rpm" runs for a
>while, then stops with the following messages:
>
> > gcc -D__KERNEL__ -I/usr/src/redhat/BUILD/linux/include -Wall
> -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing
> -D__SMP__ -pipe -fno-strength-reduce -m486 -malign-loops=2
> -malign-jumps=2 -malign-functions=2 -DCPU=586 -c -o process.o process.c
> > {standard input}: Assembler messages:
> > {standard input}:354: Warning: using `%eax' instead of `%ax' due to `l'
> suffix
> > {standard input}:355: Warning: using `%eax' instead of `%ax' due to `l'
> suffix
> > {standard input}:356: Warning: using `%eax' instead of `%ax' due to `l'
> suffix
> > {standard input}:357: Warning: using `%eax' instead of `%ax' due to `l'
> suffix
> > {standard input}:358: Warning: using `%eax' instead of `%ax' due to `l'
> suffix
> > {standard input}:521: Warning: using `%eax' instead of `%ax' due to `l'
> suffix
> > {standard input}:521: Warning: using `%eax' instead of `%ax' due to `l'
> suffix
> > {standard input}:866: Error: no such 386 instruction: `movups
> %xmm0,0x00(%eax)'
> > {standard input}:867: Error: no such 386 instruction: `movups
> %xmm1,0x10(%eax)'
> > {standard input}:868: Error: no such 386 instruction: `movups
> %xmm2,0x20(%eax)'
> > {standard input}:869: Error: no such 386 instruction: `movups
> %xmm3,0x30(%eax)'
> > {standard input}:962: Error: no such 386 instruction: `movups
> %xmm0,0x00(%eax)'
> > {standard input}:963: Error: no such 386 instruction: `movups
> %xmm1,0x10(%eax)'
> > {standard input}:964: Error: no such 386 instruction: `movups
> %xmm2,0x20(%eax)'
> > {standard input}:965: Error: no such 386 instruction: `movups
> %xmm3,0x30(%eax)'
> > {standard input}:1136: Error: no such 386 instruction: `movups
> %xmm0,0x00(%eax)'
> > {standard input}:1137: Error: no such 386 instruction: `movups
> %xmm1,0x10(%eax)'
> > {standard input}:1138: Error: no such 386 instruction: `movups
> %xmm2,0x20(%eax)'
> > {standard input}:1139: Error: no such 386 instruction: `movups
> %xmm3,0x30(%eax)'
> > make[1]: *** [process.o] Error 1
> > make[1]: Leaving directory `/usr/src/redhat/BUILD/linux/arch/i386/kernel'
> > make: *** [_dir_arch/i386/kernel] Error 2
> > Bad exit status from /var/tmp/rpm-tmp.33067 (%build)
>
>Has anyone successfully built these Rawhide packages using the
>compilers and libraries in standard RH6.1? Any hints? I don't really
>want to upgrade the whole installation, just get RPMs that provide
>SBLive! support.
>
>Thanks.
>
> Matthew Saltzman
> Clemson University Math Sciences
> [EMAIL PROTECTED]
> http://www.math.clemson.edu/~mjs
>
>
>--
>To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
>as the Subject.
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
