I fixed this by turning off LUN probing in the kernel. Now it recognizes
only two scsi devices.
-Roger Dooley
Robert Glover wrote:
>
> That's exactly what mine does too: same kernel, but a CDRW instead. On the
> bright side, it does burn CD's though. I would like to know why it's doing
> this and if there's a way to stop it other than sending kernel logging to a
> file and ignoring it.
>
> IIRC, one thing I did notice is that when I use insmod to force the kernel
> to keep sr_mod loaded, that after 30 minutes or so the kernel reports 0 SCSI
> devices and then I can no longer access the CDRW as a CDROM. At that point
> I have to 'rmmod sr_mod' and then everything is fine again.
>
> Is this normal? Or is it Abbey Normal?
>
> > Subject:
> > CDRW and kernel detection
> > Date:
> > Tue, 15 Feb 2000 16:03:20 -0600
> > From:
> > Roger Dooley <[EMAIL PROTECTED]>
> > To:
> > [EMAIL PROTECTED]
> >
> >
> >
> > I'm having a slight problem with my CDRW and hopefully someone can help.
> > When booting the kernel (2.2.14), I get the following message:
> >
> > scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> > scsi : 1 host.
> > Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> > Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr1 at scsi0, channel 0, id 0, lun 1
> > Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr2 at scsi0, channel 0, id 0, lun 2
> > Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr3 at scsi0, channel 0, id 0, lun 3
> > Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr4 at scsi0, channel 0, id 0, lun 4
> > Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr5 at scsi0, channel 0, id 0, lun 5
> > Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr6 at scsi0, channel 0, id 0, lun 6
> > Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr7 at scsi0, channel 0, id 0, lun 7
> > Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr8 at scsi0, channel 0, id 1, lun 0
> > Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr9 at scsi0, channel 0, id 1, lun 1
> > Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr10 at scsi0, channel 0, id 1, lun 2
> > Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr11 at scsi0, channel 0, id 1, lun 3
> > Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr12 at scsi0, channel 0, id 1, lun 4
> > Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr13 at scsi0, channel 0, id 1, lun 5
> > Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr14 at scsi0, channel 0, id 1, lun 6
> > Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a
> > Type: CD-ROM ANSI SCSI revision: 02
> > Detected scsi CD-ROM sr15 at scsi0, channel 0, id 1, lun 7
> > scsi : detected 16 SCSI cdroms total.
> > sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> > Uniform CDROM driver Revision: 2.56
> > sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> > sr2: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> > sr3: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> > sr4: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> > sr5: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> > sr6: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> > sr7: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
> > sr8: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> > sr9: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> > sr10: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> > sr11: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> > sr12: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> > sr13: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> > sr14: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> > sr15: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> >
> > The kernel detects 16 scsi devices, but I have only a dvd-rom and a
> > cd-rom attatched. Has anyone seen this before. I have figured out how to
> > mount them, but it's very annoying.
> >
> > TIA,
> > Roger Dooley
>
> --
> To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
> as the Subject.
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
