I'm using RedHat 6.1 and PUMP to provide DHCP service for my cable service, Optus@Home (Australia). After boot-up and DHCP lease, my routing looks thusly... Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface gateway.bagend * 255.255.255.255 UH 0 0 0 eth1 203.164.5.128 * 255.255.255.128 U 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth1 127.0.0.0 * 255.0.0.0 U 0 0 0 lo default 203.164.5.129 0.0.0.0 UG 0 0 0 eth0 As best as I can ascertain, PUMP is being started via /etc/sysconfig/network-scripts/ifup. Where do I find the commands that provide the "route add" for the above so that I can append the MSS and Window attributes for optimising my cable service? Ultimately I want... Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface gateway.bagend * 255.255.255.255 UH 0 0 0 eth1 203.164.5.128 * 255.255.255.128 U 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 1500 65536 0 eth1 127.0.0.0 * 255.0.0.0 U 0 0 0 lo default 203.164.5.129 0.0.0.0 UG 1460 65536 0 eth0 Thanks in advance... --- Jason Allen [mailto:[EMAIL PROTECTED]] WWW: http://www.pobox.com/~jallen UIN: 1533700 Phone: 0402 004 419 (+61 4 0200 4419) Out the 10Base-T, through the router, down the T1, over the leased line, off the bridge, past the firewall .. nothing but Net. -- To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe" as the Subject.
