Solved it - tried booting from expert mode and we'd already set up the
partitions we wanted although we went thru the dd process again. NH
----------
>From: Hal Burgiss <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: RH6 crashes out of diskdriud with error 11!
>Date: Wed, Jan 19, 2000, 2:49 pm
>
>On Wed, Jan 19, 2000 at 02:37:44PM +0000, Neil Hollow wrote:
>> My colleage at work is trying to set up a linux server. RH6 boots
>> the pc installation goes smoothly until dd. Firstly adding a
>> filesystem to the drive (max limits of space) says it cannot do
>> since there is no space. The way around this is to use "delete"
>> then after this the type of filesystem appears listed in diskdriud
>> window (the very one it could not create). Anyway so having created
>> the filesystems click on ok to create them move on etc. dd crashes
>> with a signal 11 error.
>>
>> Whats going on?
>
>Usually a hardware error.
>
> http://www.bitwizard.nl/sig11/
> http://www.redhat.com/corp/support/docs/gotchas/6.1/gotchas-6.1.html
>
>
>> PS the disks are less than 3.5gb in size and were still formated in msdos
>> format. There are some bad sectors according to dos one of the disks.
>
>
>--
>Hal B
>[EMAIL PROTECTED]
>--
> Linux helps those who help themselves
>
>
>--
>To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
>as the Subject.
>
>
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
