At 11:10 17/01/2000 +0100, you wrote:
>Hi,
>
>You will have to run setserial for each port except ttyS0 and ttyS1.
>
>man setserial
>
>If you can wait until tonight, I may send you the script I execute to
>'setserial' my STB fourport card. Pls, let me know.
>
>Regards
>Gustav
Hello Gustav,
yes i understood i am waiting tonight for your answer
i have done the following:
first off all after install RedHat 6.0 the file /etc/rc.d/rc.serial do not
exist ????
i have copy rc.serial on /etc/rc.d/rc.serial
i am using radioamateur programme using name ax0 for ttyS1,
ax1
ax1 for ttyS4
rc.serial contain the line:
setserial -bv /dev/ttyS4 port 0x1a0 irq 5 uart 8250 ^fourport
setserial -bv /dev/ttyS5 " 1a8 5 "
setserial -bv /dev/ttyS6 " 1b0 5 "
setserial -bv /dev/ttyS7 " 1b8 5 "
the address and irq's are those mapping i/o to each channel write on the
four port manual
and irq5 are not used for other purpose also this card work nicely on one
old version
slackware linux last year
ttyS1 are in connection with anoter PC using DOS at 38.4Kbs
i search to use ttyS4,5,6 and 7 at 9.6kbps with my old four serial card to
connect
4 modem like (in fact radio-TNC's)
>on4hu wrote:
> >
> > hello everybody
> >
> > i am completly a newcomer with linux RedHat 6.0 2.2.5-15 and french
> speaking
> > my four serials ports will not fonction..why?
> > my computer is Intel pentium-II 400Mhz with com1 and com2 installed, no
> > com3 nor com4
> > i have initialized with the following command the 4x serials as below
> >
> > mknod -m 666 /dev/ttyS4 c 4 68
> > mknod -m 666 /dev/ttyS5 c 4 69
> > mknod -m 666 /dev/ttyS6 c 4 70
> > mknod -m 666 /dev/ttyS7 c 4 71
> >
> > only ttyS0 and ttyS1 (com1: + com2:) will work
> > please H E L P
> >
Andre Hoolandts Internet E-Mail-> [EMAIL PROTECTED] or
[EMAIL PROTECTED]
Rue du Printemps,9 ham tcpip bbs ->
[EMAIL PROTECTED]
B-7700 MOUSCRON BELGIUM ham ax25 bbs -> [EMAIL PROTECTED]
Tel.: +32-(0)56-84.57.40 ham -> on4hu = 44.144.3.1 - on0hu =
44.144.3.44
Fax.: +32-(0)56-84.57.41 ham -> Radio Network *
EURO><LINK *
WEB for radio-amateurs:
<http://users.skynet.be/on4hu/>http://users.skynet.be/on4hu/ &
<http://ping.be/on4hu/>http://ping.be/on4hu/
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
