Hi:
I have RH 6.0 in a Compaq Deskpro and I can't have the NIC work at all!
Well, in fact this PC has the ethernet card embedded in the mainboard
and I read I had to load the AMD Lance driver (pcnet32) in the kernel
(2.2.13), but it doesn't work. Besides the only driver I load is the AMD
driver and when I try to configure the card in the X environment this is
the only driver that does not appear between the options! Another
problem I have is that my CD-ROM used to work perfectly but since I
compiled the kernel (the last time I did it) I can mount it but the GUI
CD player doesn't work anymore even though I only changed the ethernet
cards options.
With the dmesg command I get the following:
Linux version 2.2.13 (root@linux) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #12 Tue Nov 16 08:21:06 PET 1999
Detected 199908422 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 398.95 BogoMIPS
Memory: 30732k/32768k available (1008k kernel code, 412k reserved, 576k
data, 40k init)
CPU: Intel Pentium MMX stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xee1d1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:a0 [1106/0586]: Work around ISA DMA hangs (00)
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
sv: version v0.16 time 08:12:25 Nov 16 1999
Sound initialization started
sb: Interrupt test on IRQ7 failed - Probable IRQ conflict
<Sound Blaster 16 (4.16)> at 0x220 irq 7 dma 1,5
<Sound Blaster 16> at 0x330 irq 7 dma 0
Sound initialization complete
VP_IDE: IDE controller on PCI bus 00 dev a1
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1030-0x1037, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1038-0x103f, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MPA3026ATU, ATA DISK drive
hdc: CREATIVECD3220E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: FUJITSU MPA3026ATU, 2503MB w/0kB Cache, CHS=635/128/63, UDMA
hdc: ATAPI 32X CD-ROM drive, 240kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of
California
PPP line discipline registered.
Partition check:
hda: hda1 hda2 < hda5 hda6 > hda3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 40k freed
Adding Swap: 165272k swap-space (priority -1)
As you can see there are another conflicts to solve :) What can I do?
Angel Madge
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
