Yes, that will work, I think you have to tell it irq as well, I forget the order,
though. Although, this is specified at boot time remember. Better to re-install and
do it right, or go into your config file and enter that line in. This, I have not
figured out yet how to do, I just re-installed Linux to make sure it was right...
Mike
Michael Hatzakis, Jr MD
Resident Physiatrist - R3
Thomas Jefferson University Hospital
Department of Rehabilitation Medicine
Philadelphia, PA, 19026
E-Mail Address: [EMAIL PROTECTED]
-----Original Message-----
From: Pat Swanson [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, May 12, 1998 2:35 PM
To: [EMAIL PROTECTED]
Subject: RE: 3com 3c905B-TX Ethernet Card!
Thanks for your prompt reply,
so do you since the I got it on I/O e400 and IRQ 11 , then the
additional command should be as follows?
ether=11,0xe400,eth0
please let me if that is correct?
Pat
>From [EMAIL PROTECTED] Tue May 12 06:29:05 1998
>Received: (qmail 13778 invoked by uid 501); 12 May 1998 13:28:41 -0000
>Resent-Date: 12 May 1998 13:28:41 -0000
>Resent-Cc: recipient list not shown: ;
>MBOX-Line: From [EMAIL PROTECTED] Tue May 12 09:28:40
1998
>Message-ID: <[EMAIL PROTECTED]>
>From: "Michael Hatzakis, Jr MD" <[EMAIL PROTECTED]>
>To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
>Subject: RE: 3com 3c905B-TX Ethernet Card!
>Date: Tue, 12 May 1998 08:35:16 -0400
>X-Mailer: Microsoft Internet E-mail/MAPI - 8.0.0.4211
>Encoding: 43 TEXT
>Resent-Message-ID: <"Ky2-Q.0.qM3.7w4Mr"@mail2.redhat.com>
>Resent-From: [EMAIL PROTECTED]
>Reply-To: [EMAIL PROTECTED]
>X-Mailing-List: <[EMAIL PROTECTED]> archive/latest/5673
>X-Loop: [EMAIL PROTECTED]
>Precedence: list
>Resent-Sender: [EMAIL PROTECTED]
>X-URL: http://www.redhat.com
>
>Use select parameters, don't use autoprobe and enter the i/o and irq
manually on install and be sure to type 0xe400 as opposed to e400
>
>Mike
>
>
>Michael Hatzakis Jr, MD
>Resident Physiatrist - R3
>Department of Rehabilitation
>Thomas Jefferson University Medical Center
>Philadelphia, PA, 19026
>
>My E-Mail: [EMAIL PROTECTED]
>
>
>-----Original Message-----
>From: Pat Swanson [SMTP:[EMAIL PROTECTED]]
>Sent: Tuesday, May 12, 1998 6:30 AM
>To: [EMAIL PROTECTED]
>Subject: 3com 3c905B-TX Ethernet Card!
>
>Hi all,
>
>am trying to install RedHat 5.0 via FTP, using my ethernet card model
>3c905B-TX by 3com , since I can't get RedHat to auto prob it could
>someone please help me using the addition kernel command option,
knowing
>that it's on IRQ 11 and using I/O 400 or E400.
>
>
>Regards,
>
>Pat
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
>
>
>--
> PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST
ARCHIVES!
>http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips
/mailing-lists
> To unsubscribe: mail [EMAIL PROTECTED] with
> "unsubscribe" as the Subject.
>
>
>
>--
> PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST
ARCHIVES!
>http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips
/mailing-lists
> To unsubscribe: mail [EMAIL PROTECTED] with
> "unsubscribe" as the Subject.
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
application/ms-tnef
