James,
#
multicastclient # listen on default 224.0.1.1
[EMAIL PROTECTED] etc]# ntpd -A -c /etc/ntp.conf -l /var/log/ntp.log
[EMAIL PROTECTED] etc]# ntptrace
localhost: stratum 16, offset 0.000019, synch distance 0.00066
0.0.0.0: *Not Synchronized*
[EMAIL PROTECTED] etc]# tail -f /var/log/ntp.log
1 Oct 14:25:27 ntpd[25605]: signal_no_reset: signal 13 had flags 4000000
1 Oct 14:25:27 ntpd[25605]: precision = 9 usec
1 Oct 14:25:27 ntpd[25605]: kernel time discipline status 0040
1 Oct 14:25:27 ntpd[25605]: frequency initialized 0.000 from /etc/ntp/drift
1 Oct 14:25:27 ntpd[25605]: bind() fd 10, family 2, port 123, addr 224.0.1.1, i
n_classd=1 flags=0 fails: Address already in use
1 Oct 14:25:27 ntpd[25605]: ...multicast address 224.0.1.1 using wildcard socke
t
1 Oct 14:25:27 ntpd[25605]: logging to file /var/log/ntp.log
1 Oct 14:25:27 ntpd[25605]: system event 'event_restart' (0x01) status 'sync_al
arm, sync_unspec, 1 event, event_unspec' (0xc010)
1 Oct 14:25:27 ntpd[25606]: signal_no_reset: signal 17 had flags 4000000
1 Oct 14:25:37 ntpd[25605]: peer LOCAL(0) event 'event_reach' (0x84) status 'un
reach, conf, 1 event, event_reach' (0x8014)
[EMAIL PROTECTED] etc]# ntptrace
localhost: stratum 16, offset 0.000017, synch distance 0.00127
0.0.0.0: *Not Synchronized*
[EMAIL PROTECTED] etc]#
At 11:22 AM 10/1/2003 -0700, you wrote:
Let's see if we can solve this one mod at a time.
First, uncomment;
#multicastclient # listen on default 224.0.1.1
change to;
multicastclient # listen on default 224.0.1.1
Restart ntpd and run ntptrace again.
James
-----Original Message-----
From: Jeff Silberberg [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 01, 2003 10:43 AM
To: James D. Parra
Cc: Redhat-List (E-mail)
Subject: RE: setting up NTPd
- James,
First thank you for your help here. I am new to RH Linux, after many years of AIX & FreeBSD ....
- Now,
- /etc/ntp.conf
- # Added by JMS 9.29.03
- #
- server rolex.usg.edu prefer
- server timex.usg.edu
- server timex.cs.columbia.edu
- #
- # Undisciplined Local Clock. This is a fake driver intended for backup
- # and when no outside source of synchronized time is available. The
- # default stratum is usually 3, but in this case we elect to use stratum
- # 0. Since the server line does not have the prefer keyword, this driver
- # is never used for synchronization, unless no other other
- # synchronization source is available. In case the local host is
- # controlled by some external source, such as an external oscillator or
- # another protocol, the prefer keyword would cause the local host to
- # disregard all other synchronization sources, unless the kernel
- # modifications are in use and declare an unsynchronized condition.
- #
- server 127.127.1.0 # local clock
- fudge 127.127.1.0 stratum 10
- #
- # Drift file. Put this in a directory which the daemon can write to.
- # No symbolic links allowed, either, since the daemon updates the file
- # by creating a temporary in the same directory and then rename()'ing
- # it to the file.
- #
- driftfile /etc/ntp/drift
- #
- #multicastclient # listen on default 224.0.1.1
- broadcastdelay 0.008
- #
- # Authentication delay. If you use, or plan to use someday, the
- # authentication facility you should make the programs in the auth_stuff
- # directory and figure out what this number should be on your machine.
- #
- authenticate no
- #
- # Keys file. If you want to diddle your server at run time, make a
- # keys file (mode 600 for sure) and define the key number to be
- # used for making requests.
- #
- # PLEASE DO NOT USE THE DEFAULT VALUES HERE. Pick your own, or remote
- # systems might be able to reset your clock at will. Note also that
- # ntpd is started with a -A flag, disabling authentication, that
- # will have to be removed as well.
- #
- #keys /etc/ntp/keys
- #
- logfile /var/log/ntp.log
- /etc/ntp/step-tickers
- rolex.usg.edu
- timex.usg.edu
- timex.cs.columbia.edu
- [EMAIL PROTECTED] etc]# ntpdate -d rolex.usg.edu
- 1 Oct 13:33:30 ntpdate[25449]: ntpdate 4.1.0 Wed Sep 5 06:54:31 EDT 2001 (1)
- transmit(198.72.72.10)
- receive(198.72.72.10)
- transmit(198.72.72.10)
- receive(198.72.72.10)
- transmit(198.72.72.10)
- receive(198.72.72.10)
- transmit(198.72.72.10)
- receive(198.72.72.10)
- transmit(198.72.72.10)
- server 198.72.72.10, port 123
- stratum 2, precision -17, leap 00, trust 000
- refid [130.207.244.240], delay 0.02878, dispersion 0.00018
- transmitted 4, in filter 4
- reference time: c3258c51.e02ab000 Wed, Oct 1 2003 13:24:33.875
- originate timestamp: c3258e6a.cd516000 Wed, Oct 1 2003 13:33:30.802
- transmit timestamp: c3258e6a.c5bdd766 Wed, Oct 1 2003 13:33:30.772
- filter delay: 0.02965 0.02887 0.02940 0.02878
- 0.00000 0.00000 0.00000 0.00000
- filter offset: 0.027505 0.027690 0.027460 0.027825
- 0.000000 0.000000 0.000000 0.000000
- delay 0.02878, dispersion 0.00018
- offset 0.027825
- 1 Oct 13:33:30 ntpdate[25449]: adjust time server 198.72.72.10 offset 0.027825 sec
- But,
- [EMAIL PROTECTED] etc]# ntpd -A -c /etc/ntp.conf -l /var/log/ntp.log
- [EMAIL PROTECTED] etc]# ntptrace
- localhost: stratum 16, offset 0.000018, synch distance 0.00029
- 0.0.0.0: *Not Synchronized*
- [EMAIL PROTECTED] etc]#
- An a little latter
- [EMAIL PROTECTED] etc]# ntptrace
- localhost: stratum 11, offset 0.000017, synch distance 0.94823
- [EMAIL PROTECTED] etc]#
- /var/log/ntp.log
- 1 Oct 13:37:47 ntpd[25459]: logging to file /var/log/ntp.log
- 1 Oct 13:37:47 ntpd[25459]: ntpd 4.1.0 Wed Sep 5 06:54:30 EDT 2001 (1)
- 1 Oct 13:37:47 ntpd[25459]: signal_no_reset: signal 13 had flags 4000000
- 1 Oct 13:37:47 ntpd[25459]: precision = 6 usec
- 1 Oct 13:37:47 ntpd[25459]: kernel time discipline status 0040
- 1 Oct 13:37:47 ntpd[25459]: frequency initialized 0.000 from /etc/ntp/drift
- 1 Oct 13:37:47 ntpd[25459]: logging to file /var/log/ntp.log
- 1 Oct 13:37:47 ntpd[25459]: system event 'event_restart' (0x01) status 'sync_alarm, sync_unspec, 1 event, event_unspec' (0xc010)
- 1 Oct 13:37:47 ntpd[25460]: signal_no_reset: signal 17 had flags 4000000
- 1 Oct 13:38:00 ntpd[25459]: peer LOCAL(0) event 'event_reach' (0x84) status 'unreach, conf, 1 event, event_reach' (0x8014)
- Any other ideas ????
- JMS...
- At 10:10 AM 10/1/2003 -0700, James D. Parra wrote:
- Sorry about that. I should have proofed my e-mail.
- You are correct; edit ntp.conf.
- If step-tickers is empty, populate it with Stratum 2 IP address, or DNS resolvable names if you prefer. DNS resolvable names may be a better idea incase the addresses change.
- James
- -----Original Message-----
- From: Jeff Silberberg [mailto:[EMAIL PROTECTED]]
- Sent: Wednesday, October 01, 2003 10:00 AM
- To: James D. Parra
- Subject: RE: setting up NTPd
- Okay,
I have been working with /etc/NTP.conf what is ndb.conf ?
An my Step-Tickers is currently empty :-)
Lastly, IPs only ? Not DNS resolvable Names ??
Thanks Again, JMS...
- At 09:38 AM 10/1/2003 -0700, you wrote:
- Hello Jeff,
- I am not sure if NTP is broken on RH 7.2, but the following shows how I have it set up.
- Edit /etc/nbd.conf as such;
- server xxx.xxx.xxx.xxx prefer ---> add stratum 2 server ip address here with the "prefer" comment (add others for redundancy)
- server 127.127.1.0 # local clock
- fudge 127.127.1.0 stratum 10
- Edit or create file /etc/ntp/step-tickers with the Stratum 2 IP addresses as so;
- xxx.xxx.xxx.xxx
- Restart the ntp server;
- # service ntpd restart
- That should be all you need. Run ntptrace and check the results.
- James
- -----Original Message-----
- From: Jeff Silberberg [mailto:[EMAIL PROTECTED]]
- Sent: Wednesday, October 01, 2003 8:48 AM
- To: [EMAIL PROTECTED]
- Subject: RE: setting up NTPd
- Hi James,
I am having some similar issues with a Redhat 7.2 - "2.4.9-31enterprise" Server. But in my case I can't get NTP to see the time servers I have defined, even though the box under it in the rack running FreeBSD sees them fine. Since it's 7.2 I am using /etc/ntp.conf as the config base, but when I run ntptrace the only server I see is 127.0.0.1 Can you maybe pass along some hints as to how you got this running, or did you just go to RH 9 ? Where NTP is supposedly fixed ? TIA, JMS. - Jeffrey Silberberg
- CompuDesigns, Inc.
- Atlanta, GA. 30350
