On Mon, 8 Sep 2003 16:09:36 -0500 (CDT) "Bob Moran" <[EMAIL PROTECTED]> wrote:
> Sean, > > Thanks for the suggestion. Tried out mgetty and still ran into the same > issue with the login not being accepted. Strange because both agetty and > mgetty work perfect when you connect PC to PC throught that same serial > port. I think that somehow or another the connection through the modem is > causing the login issue. Almost acts like if you tried to login to a *nix > system but the account was set up with a false shell. > > Bob, If you're having problems with both then it likely isn't a configuration issue as such. From the symptoms you describe i'd _guess_ that it's a flow control issue. Since you have agetty installed make sure you try the -h parameter to enable hardware flow control. Also, as a debugging measure you could try to disable all flow control in the modem... AT&H0&I0 You wouldn't want to leave it like that in production but it might be revealing. It sounds like you've already done a fair bit of research but make sure you've also read the info at : http://www.tldp.org/HOWTO/Modem-HOWTO.html They've got reams of good information and maybe you'll find your answer there. Good luck, Sean -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
