On Tue, 2003-09-02 at 00:32, Ben Joyce wrote: > hi list. > > just wondering if anyone has experienced any problems with RHL9 booting > after previously removing/re-inserting the NIC, in this case a 3Com > 3C905B (iirc). > > I powered down and removed the card and used it in another machine > temporarily, then put it back in and now i have no networking > capabilities... and on boot I get [FAILED] on the NIC/network related > services/drivers/etc. > > When i try to activate it (via the GUI interface applet) it fails too.
You might want to dig into your /etc/modules.conf and remove the module from there first - then reboot - let kudzu "find the new hardware" again; then once you're happening with that, you should be able to get your networking back in short order. stephen kuhn ============================== illawarra computer services a kuhn media australia company http://kma.0catch.com ----------------------------------------------------------------- * This message was composed on a 100% Microsoft free computer * ----------------------------------------------------------------- Patience is a minor form of despair, disguised as virtue. -- Ambrose Bierce, on qualifiers -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
